Professional Documents
Culture Documents
Página 1 de 2
Cerrar SIS
Pantalla anterior
Producto: EXCAVATOR
Modelo: 320B EXCAVATOR 3MR
Configuración: ISJ HEX COMMONALITY CHART 3MR00001-UP (MACHINE)
Pruebas y Ajustes
308B, 311B, 312B, 315B, 317B, 318B, 320B, 322B, 325B, 330B, M325B and W330B
Excavators Engine and Pump Control
Número de medio -RENR1998-06 Fecha de publicación -01/10/2004 Fecha de actualización -06/10/2004
i01261491
Illustration 1 g00667337
Installation of the speed sensor
(2) Locknut
(4) Gear
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 05/02/2010
ISJ HEX COMMONALITY CHART 3MR00001-UP (MACHINE)(SEBP5600 - 00) - ... Página 2 de 2
Prior to replacement of the sensor, ensure that the sensor has failed. Always check that the power is
available to the sensor. Measure the voltage between the contacts of the sensor. Check for metal
shavings on the magnetic tip or the gear teeth.
1. Turn the key start switch and the disconnect switch to the OFF position.
2. Slowly tighten speed sensor (1) into flywheel housing (5) until magnetic core (3) contacts gear
(4) .
3. Turn speed sensor (1) counterclockwise. The turn should be approximately 3/4 of a rotation.
11. If the correct rpm is not displayed, turn speed sensor (1) clockwise. The turn should not be greater
than 1/3 of a rotation.
15. Clear the error log. Refer to Testing and Adjusting, "Using Service Mode".
Copyright 1993 - 2010 Caterpillar Inc. Fri Feb 5 06:09:24 EST 2010
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 05/02/2010