Professional Documents
Culture Documents
* Use on off-road vehicles in competition only. Not intended for vehicles used on public roads and
highways.
– First of all is to set ARD Disable Switch Config & ARD Force Switch Config value to None.
Photo No1
– In 2nd case it will pop-up You new window, asking You to enter customer passwords.
Enter them.
If You don't know them, click on Factory passwords. Make/Get passwords, and insert them in appropriate fields.
– Repeat the same procedure (setting the value to None) with the parameter marked with number 4 on PhotoNo1
(parameter name is: ARD Force Switch Config).
– Parameter called ARD Soft Shutdown Input Configuration (last one in PhotoNo1, inside InputSelections), also has
to be set to NONE. If it is not, repeat the same procedure as You used for previous two parameters.
EXTRA!
– On some engine there is one extra parameter regarding the ARD, it is called ARD Automatic Regeneration Switch
Configuration. That parameter has to be set on NONE as well. If it exists in Your case, make sure that it is set on
NONE.