Professional Documents
Culture Documents
Cerrar SIS
Pantalla anterior
i02127798
The ECM detects high current for the Injection actuation pressure control valve for more than
120 milliseconds when the driver is in the ON position.
System Response:
While the engine is running and the fault code is active, the ECM will cycle the injection actuation
pressure control valve on and off. The injection actuation pressure control valve will default to 7.5
MPa (1087.80 psi).
31% will be displayed next to the status for the "Injection Actuation Current" on Caterpillar
Electronic Technician (ET).
The engine may run rough. The engine may also have low power. This diagnostic code may also
cause the engine to shutdown.
Test Step 1. Perform the following diagnostic procedure: Injection Actuation Pressure Control
Valve Circuit - Test
Results:
OK - STOP
Copyright 1993 - 2010 Caterpillar Inc. Wed Aug 25 20:37:50 CST 2010
Todos los derechos reservados.
Red privada para licenciados del SIS.