Professional Documents
Culture Documents
Service Manual: LC-60LE632U LC-70LE732U
Service Manual: LC-60LE632U LC-70LE732U
LC-60LE632U/LC-70LE732U
SERVICE MANUAL
No. S31O870LE732U
LCD COLOR TELEVISION
LC-60LE632U
MODELS LC-70LE732U
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
CONTENTS
SAFETY PRECAUTION [4] PUBLIC MODE SETTING PROCEDURE
IMPORTANT SERVICE SAFETY (LC-70LE732U) ...........................................5-36
PRECAUTION.....................................................i CHAPTER 6. TROUBLESHOOTING TABLE
PRECAUTIONS A PRENDRE LORS DE [1] Failure diagnosis by LED in front of cabinet
LA REPARATION ...............................................ii (LC-60LE632U) .............................................6-1
PRECAUTIONS FOR USING LEAD-FREE [2] LED flashing specification at the time of an
SOLDER ........................................................... iii error (Center icon LED used)
OUTLINE (LC-60LE632U) .............................................6-1
MAJOR SERVICE PARTS ................................iv [3] TROUBLESHOOTING TABLE
CHAPTER 1. SPECIFICATIONS (LC-60LE632U) .............................................6-5
[1] SPECIFICATIONS ......................................... 1-1 [4] Failure diagnosis by LED in front of cabinet
(LC-70LE732U) ...........................................6-21
CHAPTER 2. OPERATION MANUAL [5] LED flashing specification at the time of an
[1] OPERATION MANUAL .................................. 2-1 error (Center icon LED used)
CHAPTER 3. DIMENSIONS (LC-70LE732U) ...........................................6-21
[1] DIMENSIONS (LC-60LE632U) ...................... 3-1 [6] TROUBLESHOOTING TABLE
[2] DIMENSIONS (LC-70LE732U) ...................... 3-2 (LC-70LE732U) ...........................................6-25
CHAPTER 4. REMOVING OF MAJOR PARTS CHAPTER 7. MAJOR IC INFORMATIONS
[1] REMOVING OF MAJOR PARTS [1] MAJOR IC INFORMATIONS
(LC-60LE632U) .............................................. 4-1 (LC-60LE632U) .............................................7-1
[2] The location putting on the heat measure [2] MAJOR IC INFORMATIONS
sheet (LC-60LE632U) .................................... 4-7 (LC-70LE732U) .............................................7-3
[3] Precautions for assembly CHAPTER 8. OVERALL WIRING/SYSTEM BLOCK
(LC-60LE632U) .............................................. 4-8 DIAGRAM
[4] REMOVING OF MAJOR PARTS [1] OVERALL WIRING DIAGRAM
(LC-70LE732U) ............................................ 4-10 (LC-60LE632U) .............................................8-1
[5] The location putting on the heat measure [2] OVERALL WIRING DIAGRAM
sheet (LC-70LE732U) .................................. 4-16 (LC-70LE732U) .............................................8-2
[6] Precautions for assembly [3] SYSTEM BLOCK DIAGRAM
(LC-70LE732U) ............................................ 4-17 (LC-60LE632U) .............................................8-3
CHAPTER 5. ADJUSTMENT [4] SYSTEM BLOCK DIAGRAM
[1] ADJUSTMENT PROCEDURE (LC-70LE732U) .............................................8-4
(LC-60LE632U) .............................................. 5-1 Parts Guide
[2] PUBLIC MODE SETTING PROCEDURE
(LC-60LE632U) ............................................ 5-15
[3] ADJUSTMENT PROCEDURE
(LC-70LE732U) ............................................ 5-21
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
WARNING • Using two clip leads, connect a 1.5k ohm, 10 watt resistor paral-
leled by a 0.15µF capacitor in series with all exposed metal cabinet
1. For continued safety, no modification of any circuit should be parts and a known earth ground, such as electrical conduit or elec-
attempted.
trical ground connected to an earth ground.
2. Disconnect AC power before servicing. • Use an AC voltmeter having with 5000 ohm per volt, or higher, sen-
sitivity or measure the AC voltage drop across the resistor.
C A U T I O N : F O R C O N T I N U E D PROTECTION • Connect the resistor connection to all exposed metal parts having a
AGAINST A RISK OF FIRE REPLACE ONLY WITH return to the chassis (antenna, metal cabinet, screw heads, knobs
and control shafts, escutcheon, etc.) and measure the AC voltage
SAME TYPE FUSE. drop across the resistor.
F7001 (250V 5A) All checks must be repeated with the AC cord plug connection
reversed. (If necessary, a nonpolarized adaptor plug must be used
only for the purpose of completing these checks.)
Any reading of 0.75 Vrms (this corresponds to 0.5 mA rms AC.) or
more is excessive and indicates a potential shock hazard which
must be corrected before returning the monitor to the owner.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SAFETY NOTICE
Many electrical and mechanical parts in LCD color television have For continued protection, replacement parts must be identical to those
special safety-related characteristics. used in the original circuit.
These characteristics are often not evident from visual inspection, nor The use of a substitute replacement parts which do not have the same
can protection afforded by them be necessarily increased by using safety characteristics as the factory recommended replacement parts
replacement components rated for higher voltage, wattage, etc. shown in this service manual, may create shock, fire or other hazards.
Replacement parts which have these special safety characteristics are
identified in this manual; electrical components having such features
are identified by " " and shaded areas in the Replacement Parts List
and Schematic Diagrams.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
i
LC-60LE632U/LC-70LE732U
PRECAUTIONS A PRENDRE LORS DE LA REPARATION
Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux
conseils suivants.
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
AVIS POUR LA SECURITE
De nombreuses pièces, électriques et mécaniques, dans les télévi- Pour assurer la protection, ces pièces doivent être identiques à celles
seur ACL présentent des caractéristiques spéciales relatives à la sé- utilisées dans le circuit d'origine. L'utilisation de pièces qui n'ont pas
curité, qui ne sont souvent pas évidentes à vue. Le degré de protec- les mêmes caractéristiques que les pièces recommandées par l'usine,
tion ne peut pas être nécessairement augmentée en utilisant des indiquées dans ce manuel, peut provoquer des électrocutions, incen-
pièces de remplacement étalonnées pour haute tension, puissance, dies, radiations X ou autres accidents.
etc.
Les pièces de remplacement qui présentent ces caractéristiques sont
identifiées dans ce manuel; les pièces électriques qui présentent ces
particularités sont identifiées par la marque " " et hachurées dans la
liste des pièces de remplacement et les diagrammes schématiques.
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
ii
LC-60LE632U/LC-70LE732U
PRECAUTIONS FOR USING LEAD-FREE SOLDER
Indicates lead-free solder of tin, silver and copper. Indicates lead-free solder of tin, silver and copper.
Soldering
• As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 °C which is higher than the conventional lead solder by 40 °C, and as it has poor
solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, Since the land may be
peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the
steady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and off the power of the bit as
required.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
• Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing
PRICE PART
PARTS CODE DESCRIPTION
RANK DELIVERY
ZHNDAi123250E BL J φ0.3mm 250g (1roll)
ZHNDAi126500E BK J φ0.6mm 500g (1roll)
ZHNDAi12801KE BM J φ1.0mm 1kg (1roll)
iii
LC-60LE632U/LC-70LE732U
LC-60LE632U
OUTLINE Service Manual
PWB Unit
(LC-60LE632U)
NOTE: *1 Replace MAIN PWB Units (DKEYMF733FM17) in case of IC8401, IC3303 or IC8455 failure.
(LC-70LE732U)
NOTE: *1 Replace MAIN PWB Units (DKEYMF733FM19) in case of IC8401, IC3303 or IC8455 failure.
OTHER Unit
Service Jigs
iv
LC-60LE632U/LC-70LE732U
CHAPTER 1. SPECIFICATIONS
LC-60LE632U
Service Manual
[1] SPECIFICATIONS
1–1
LC-60LE632U/LC-70LE732U
CHAPTER 2. OPERATION MANUAL
LC-60LE632U
Service Manual
Part Names
TV (Front)
OPC sensor *
TV (Rear/Side)
*2 *1
RS-232C terminal
POWER PC IN terminal
button
MENU
button VIDEO 2
terminals
INPUT
button VIDEO 1
terminals
Channel
buttons COMPONENT
(CH / ) terminals
Volume
buttons
(VOL / )
*1
HDMI 1 terminal
ARC: Audio Return Channel
HDMI 2 terminal
USB 2 Antenna/
terminal Cable in
HDMI 3 terminal
DIGITAL AUDIO
ETHERNET OUTPUT terminal
terminal AUDIO IN terminal HDMI 4 terminal
(shared for PC IN
and HDMI 1) *3
2–1
LC-60LE632U/LC-70LE732U
2–2
LC-60LE632U/LC-70LE732U
QUICK REFERENCE
Attaching the Stand
Before attaching (or detaching) the stand, unplug the AC cord.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
Attach the stand in the correct direction.
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 Confirm that there are 12 screws (8 long screws 4 Insert and tighten the 4 screws into the 4 holes on
and 4 short screws) supplied with the stand unit. the rear of the TV.
21 Set the post for the stand unit onto the box.
2 Attach the base to the post. Short screws
3 Insert and tighten the 8 screws into the 8 holes
on the bottom of the base.
Hold the stand unit securely with one hand, and then
tighten the screws.
2
Long
screws
2 1
FRONT
3 Insert the stand into the openings on the rear of the TV.
Make sure that the stand is firmly inserted into the TV.
Improper installation may result in tilting of the TV set.
Soft cushion
2–3
LC-60LE632U/LC-70LE732U
CHAPTER 3. DIMENSIONS
LC-60LE632U
Service Manual
5 7/ 8
52 11/ 32 (1329.12)*1 (149)
34 19/ 64 (871)
33 (838)
*1
(747.63)
29 7/ 16
18 1/ 2 (470)
21 7/ 64 (536) 13 1/ 8 (333)
6 7/ 64 (155)
15 3/ 4 (400) 5°
9 1/ 16 (230)
(393)
2 1/ 16 (52)
64
15 3/ 4 (400)
31/
15
(443)
64
29/
17
4 1/ 2 6 5/ 8
8 15/ 32 (215) (114) (168)
*1
AN-52AG4
Active area
*2
Thinnest part
3–1
LC-60LE632U/LC-70LE732U
[2] DIMENSIONS (LC-70LE732U)
2 1/ 64 (51)*2
63 1/ 2 (1613) 3 1/ 2 (89)
5 23/ 64
60 19/ 32 (1538.88)*1 (136)
39 45/ 64 (1008)
38 25/ 64 (975)
(865.62)*1
21 3/ 16 (538)
34 3/ 32
21 7/ 64 (536) 13 1/ 8 (333)
10 9/ 32 (261)
15 3/ 4 (400)
5°
7 31/ 64 (190)
(114)
4 1/ 2
(400)
(972)
4
3/
9/ 32
15
38
5 25/ 64 7 59/ 64
8 15/ 32 (215) (137) (201)
*1
Active area AN-52AG4
*2
Thinnest part
3–2
LC-60LE632U/LC-70LE732U
CHAPTER 4. REMOVING OF MAJOR PARTS
LC-60LE632U
Service Manual
[AC]
10 Rear Cabinet
4–1
LC-60LE632U/LC-70LE732U
[Precautions when fixing the Rear Cabinet]
When fixing the Rear Cabinet, be careful not to catch the backlight LED harness, speaker harness and other harnesses in it.
• The hooks on the external wall of the Rear Cabinet are fitted in the Front Cabinet Ass’y. After putting the Rear Cabinet in place, fit the hooks
securely; then tighten the screws.
Rear Cabinet
(Mat parts)
There is a gap without the fingernail fitting in completely only when covering Please tighten the screw after Rear Cabinet is firmly pushed, and the
with Rear Cabinet. fingernail is confirmed.
It becomes the factor of a gap increase of Front Cabinet Ass'y/Rear Cabinet
and the Rear Cabinet misregistration.
17 places
4–2
LC-60LE632U/LC-70LE732U
2. Removing of Speaker (L/R), KEY Unit and Fixing Metal Angle.
1. Detach the Bottom Cover
2. Disconnect the SP wire.
3. Detach the Speaker (L) , Speaker (R) .
4. Disconnect the RC wire.
5. Detach the KEY Unit Ass’y .
6. Disconnect the KM wire.
7. Remove the 2 lock screws and detach the Key Button from Key Button Cover .
8. Detach the KEY Unit from Key Button .
9. Remove the 19 lock screws and detach the Fixing Metal Angle .
MAIN Unit
Key Button 8
Cover [KM]
Key Button 6
Fixing 10
Metal
Angle
9
Bottom 1
[SP]
Cover
4–3
LC-60LE632U/LC-70LE732U
3. Removing of Connectors
1. Disconnect the following connectors from the MAIN Unit. (PD, LV, PL, Cl, UB)
2. Disconnect the following connectors from the POWER/DRIVE Unit. (PD, LA)
3. Disconnect the following connectors from the LCD CONTROL Unit. (LW, PL)
[LA]
[LA]
[PD]
[PL]
[LW]
MAIN Unit
[PD]
[LV]
[PL]
[CI]
[UB]
4–4
LC-60LE632U/LC-70LE732U
4. Removing of 60” LCD Panel Module Unit, LCD CONTROL Unit, MAIN Unit, POWER/DRIVE Unit.
1. Remove the 8 lock screws .
2. Detach the 14 Fixing Metal Angles .
3. Remove the 8 Hooks and detach the 60” LCD Panel Module Unit .
4. Remove the 2 Connecting Cords , 2 Ferrite Cores and 6 lock screws and detach the LCD CONTROL Unit .
5. Remove the 5 lock screws and detach the Shield (MAIN Unit) .
6. Remove the 3 lock screws and detach the MAIN Unit and Terminal Angle (Bottom) .
7. Remove the 6 lock screws and detach the POWER/DRIVE Unit and AC Cord Barrier .
8. Remove the 8 lock screws and detach the 2 Center Angles .
Shield
(MAIN Unit) 9
11
13
MAIN Unit 12
AC Cord Barrier 15
1 1 6
4 Connecting
Cord
Center
Angle
17
17 Center
1 1
Angle
4–5
LC-60LE632U/LC-70LE732U
5. Removing of R/C OPC Unit, ICON Unit, WiFi Unit.
1. Detach the R/C OPC Unit .
2. Disconnect the RA wire.
3. Remove the 1 lock screw and detach the ICON Unit .
4. Disconnect the CI wire.
5. Detach the WiFi Unit .
6. Disconnect the UB wire.
4–6
LC-60LE632U/LC-70LE732U
[2] The location putting on the heat measure sheet (LC-60LE632U)
1. MAIN PWB Unit
PSPAZC702WJKZ
4–7
LC-60LE632U/LC-70LE732U
[3] Precautions for assembly (LC-60LE632U)
1. Points to be checked and precautions when servicing the unit
Mount the main PWB Ass’y on the backlight chassis and check that the EMI-prevention parts are not peeled and twisted from the access holes. (The
EMI-prevention parts, conductive nonwoven fabric gaskets, must be seen from the access holes.)
[Countermeasure]
Attach the conductive nonwoven fabric gaskets on the shielded case on the main PWB.
PSPAZC691WJZZ x 2 pcs
PSPAZC690WJZZ
State where the main PWB and shielded case are assembled
Access hole
Access hole
4–8
LC-60LE632U/LC-70LE732U
The following is a drawing mounting the main PWB Ass’y on the backlight chassis. (The parts indicated by -> are the access holes for confirmation.)
(Main PWB Ass’y => State where the shielded case and RF terminal angle are mounted on the main PWB)
4–9
LC-60LE632U/LC-70LE732U
[4] REMOVING OF MAJOR PARTS (LC-70LE732U)
1. Removing of Stand Unit and Rear Cabinet Ass’y.
1. Remove the 4 lock screws and detach the Stand Unit .
2. Remove the 1 lock screw and detach the AC Cord Cover .
3. Disconnect AC wire and detach the AC Cord .
4. Remove the 4 VESA Hole Covers , 9 lock screws and 21 lock screws and detach the Rear Cabinet Ass’y .
3
AC Cord Cover 4 5 AC Cord
[AC]
VESA Hole Cover 6 7
Stand Unit 2 1
[AC]
Tighten together with the Fix with the 70" LCD Panel Module Unit. Only one side (outer) can come off.
Rear Cabinet Ass'y.
4 – 10
LC-60LE632U/LC-70LE732U
[Precautions for assembly]
CAUTION
Set it so that there may not be a clearance between Front Cabinet Ass'y and Rear Cabinet Ass'y.
Push Push
There is a gap without the fingernail fitting The fingernail is surely fixed when Rear cabinet Ass'y is
in completely only when covering with Rear Cabinet Ass'y. firmly pushed, and the gap disappears.
19 places
4 – 11
LC-60LE632U/LC-70LE732U
2. Removing of Speaker (L/R) and KEY Unit.
1. Disconnect the SP wire.
2. Remove the 2 lock screws and detach the Speaker (L) , Speaker (R) .
3. Disconnect the RC wire.
4. Detach the KEY Unit Ass’y .
5. Disconnect the KM wire.
6. Remove the 2 lock screws and detach the Key Button from Key Button Cover .
7. Detach the KEY Unit from Key Button .
MAIN Unit
4 – 12
LC-60LE632U/LC-70LE732U
3. Removing of Connectors
1. Disconnect the following connectors from the MAIN Unit. (PD, LV, PL, Cl, UB)
2. Disconnect the following connectors from the POWER Unit. (PD, LA, LB)
[LA] [LB]
[LA] [LB]
[PD]
MAIN Unit
[PD]
[LV]
[PL]
[CI]
[UB]
4 – 13
LC-60LE632U/LC-70LE732U
4. Removing of 70” LCD Panel Module Unit, LCD CONTROL Unit, MAIN Unit, POWER Unit.
1. Detach the 14 Fixing Metal Angle Ass’ys .
2. Remove the 12 Hooks and detach the 70” LCD Panel Module Unit .
3. Remove the 4 Hooks and detach the 2 Bottom Covers .
4. Remove the 4 lock screws and detach the Shield Ass’y (LCD CONTROL Unit) .
5. Disconnect the LW and PL wire.
6. Remove the 2 Connecting Cords , 2 Ferrite Cores , 6 lock screws and detach the LCD CONTROL Unit .
7. Remove the 5 lock screws and detach the Shield (MAIN Unit) .
8. Remove the 2 lock screws and detach the MAIN Unit and Terminal Angle (Bottom) .
9. Remove the 6 lock screws and detach the POWER Unit .
10.Remove the 12 lock screws and detach the 2 Stand Angles .
11.Remove the 16 lock screws and detach the 4 VESA Angle Ass’ys .
16 Terminal Angle 15
(Bottom)
13
20 21 VESA
LCD CONTROL 10 [PL] Angle Ass'y
Unit [LW] 20
9 VESA 21 21 VESA
Angle Ass'y Angle Ass'y
20
Ferrite Core 8
Stand 19 19 Stand
20
Angle Angle
Connecting Cord 7 18
Bottom 4 18 4 Bottom Cover
Cover Hook Hook
Shield Ass'y 6
(LCD CONTROL Unit)
5
4 – 14
LC-60LE632U/LC-70LE732U
5. Removing of R/C OPC Unit, ICON Unit, WiFi Unit.
1. Detach the R/C OPC Unit .
2. Disconnect the RC wire.
3. Remove the 1 lock screw and detach the ICON Unit .
4. Disconnect the CI wire.
5. Detach the WiFi Unit .
6. Disconnect the UB wire.
4 – 15
LC-60LE632U/LC-70LE732U
[5] The location putting on the heat measure sheet (LC-70LE732U)
1. MAIN PWB Unit
PSPAZC741WJKZ
4 – 16
LC-60LE632U/LC-70LE732U
[6] Precautions for assembly (LC-70LE732U)
1. Points to be checked and precautions when servicing the unit
Mount the main PWB Ass’y on the backlight chassis and check that the EMI-prevention parts are not peeled and twisted from the access holes. (The
EMI-prevention parts, conductive nonwoven fabric gaskets, must be seen from the access holes.)
[Countermeasure]
Attach the conductive nonwoven fabric gaskets on the shielded case on the main PWB.
PMLT-A679WJQZ
PMLT-A678WJQZ x 2 pcs
PSPAZC740WJZZ
State where the main PWB and shielded case are assembled
Access hole
Access hole
4 – 17
LC-60LE632U/LC-70LE732U
The following is a drawing mounting the main PWB Ass’y on the backlight chassis. (The parts indicated by -> are the access holes for confirmation.)
(Main PWB Ass’y => State where the shielded case and RF terminal angle are mounted on the main PWB)
4 – 18
LC-60LE632U/LC-70LE732U
CHAPTER 5. ADJUSTMENT
LC-60LE632U
Service Manual
1. After replacement of any PWB unit and/or IC for repair, please note the following.
• When replacing the following units, make sure to prepare the new units loaded with updated software.
• When replacing the LCD control PWB, perform the VCOM adjustment.
2.2.2 Preparations
To upgrade the main software, it is necessary to get ready the USB Memory for version upgrade before you start.
Follow the steps below and create the USB Memory for version upgrade.
1. Copy the file BSMK_632-732_xxx.USB for version upgrade to the root directory (folder) of the USB Memory.
NOTE: In the USB Memory drive, do not store other folders or unrelated files, or more than one file for version upgrade.
Now the USB Memory for version upgrade is ready.
5–1
LC-60LE632U/LC-70LE732U
2.2.3 How to upgrade the software
1. Unplug the AC cord.
2. Insert the USB Memory for version upgrade into the service socket.
3. Plug in the AC cord with power button pressed down.
4. After 5 seconds, unpress the power button.
5. After the unit startup, the system upgrade screen as shown below within 20-40 seconds.
Software Update
60LE632U
MAIN 50%
SUB MICOM NO DATA
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version U1007071
SUB MICOM Version 㧙㧙㧙㧙㧙
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
6. Even a single failure in the process will trigger the upgrade failure screen.
Software Update
60LE632U
UPGRADE FAILURE
MAIN Project ID
SUB MICOM NO DATA
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version 㧙㧙㧙㧙㧙
SUB MICOM Version 㧙㧙㧙㧙㧙
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
NOTE: In the event of a failure, repeat the upgrade process. If the process repeatedly fails, it is likely that the hardware need fixing.
7. Upon completion of the whole process, the upgrade success screen as shown below appears. You can check the new software version on this
screen. The version information appears after the upgrade is complete.
Software Update
60LE632U
UPGRADE SUCCESS
MAIN 100%
SUB MICOM NO DATA
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version U1007071
SUB MICOM Version 㧙㧙㧙㧙㧙
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
8. Unplug the AC cord and remove the USB Memory for version upgrade.
9. Now the software version upgrade is complete.
NOTE: When you are done with the software version upgrade, start the set, go to the top page of the adjustment process screen and check the main
software version information.
5–2
LC-60LE632U/LC-70LE732U
2.3. Monitor microprocessor software version upgrade
Create the USB memory for monitor microprocessor software version upgrade in the same manner as explained in the “Main software version
upgrade”.
Copy the file BSMK_632-732_xxx.USB and BMSDMxxx.SMB. (named temporarily) for monitor microprocessor software version upgrade to the USB
memory.
Software Update
60LE632U
MAIN NO DATA
SUB MICOM 50%
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version 㧙㧙㧙㧙㧙
SUB MICOM Version 0.820
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
6. If the upgrade fails, power led will stop blinking. Also, the upgrade failure screen will be shown if upgrade screen was shown at 5.
Software Update
60LE632U
UPGRADE FAILURE
MAIN NO DATA
SUB MICOM SAME VERSION
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version 㧙㧙㧙㧙㧙
SUB MICOM Version 㧙㧙㧙㧙㧙
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
NOTE: In the event of a transient failure, upgrade will be automatically retried up to three times. If the process repeatedly fails, hardware may be the
cause.
7. The upgrade success screen will be shown if upgrade screen was shown at 5.
Software Update
60LE632U
UPGRADE SUCCESS
MAIN NO DATA
SUB MICOM 100%
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version 㧙㧙㧙㧙㧙
SUB MICOM Version 0.820
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
8. Unplug the AC cord and remove the USB Memory for version upgrade.
9. Now the software version upgrade is complete.
NOTE: When you are done with the software version upgrade, start the set, go to the top page of the adjustment process screen and check the mon-
itor microprocessor software version information and panel size information.
5–3
LC-60LE632U/LC-70LE732U
3. Entering and exiting the adjustment process mode
1) Before entering the adjustment process mode, the AV position RESET in the video adjustment menu.
2) While holding down the “VOL (–)” and “INPUT” keys at a time, plug in the AC cord of the main unit to turn on the power.
The letter “<K>” appears on the screen.
3) Next, hold down the “VOL (–)” and “CH ( )” keys at a time.
(The “VOL (–)” and “CH ( )” keys should be pressed and held until the display appears.)
Multiple lines of blue characters appearing on the display indicate that the unit is now in the adjustment process mode.
When you fail to enter the adjustment process mode (the display is the same as normal startup), retry the procedure.
4) To exit the adjustment process mode after the adjustment is done, unplug the AC cord from the outlet to make a forced shutdown. (When the
power was turned off with the remote controller, once unplug the AC cord and plug it again. In this case, wait 10 seconds or so before plugging.)
CAUTION: Use due care in handling the information described here lest your users should know how to enter the adjustment process mode. If the
settings are tampered in this mode, unrecoverable system damage may result.
4. Remote controller key operation and description of display in adjustment process mode
1) Key operation
*Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.
2) Description of display
TEMPERATURE 73
LAMP ERROR 0
3) 11 B00000040:36 4) 11 B00000040:35
5–4
LC-60LE632U/LC-70LE732U
5. List of adjustment process mode menu
The character string in brackets [ ] will appear as a page title in the adjustment process menu header.
5–5
LC-60LE632U/LC-70LE732U
Page Line Item Description Remarks (adjustment detail, etc.)
7 1 ANALOG RGB ADJ Analog RGB picture level adjustment
2 R A_GAIN
3 G A_GAIN
4 B A_GAIN
5 R OFFSET
6 G OFFSET
7 B OFFSET
8 1 VCOM ADJ VCOM adjustment value
9 1 LEV1 Standard value 1 Adjustment gradation setting.
2 LEV2 Standard value 2
3 LEV3 Standard value 3
4 LEV4 Standard value 4
5 LEV5 Standard value 5
6 LEV6 Standard value 6
10 1 MG1R WB adjustment Point 1, R adjustment value Parameter for six-point adjustment
2 MG1G WB adjustment Point 1, G adjustment value
3 MG1B WB adjustment Point 1, B adjustment value
4 MG2R WB adjustment Point 2, R adjustment value
5 MG2G WB adjustment Point 2, G adjustment value
6 MG2B WB adjustment Point 2, B adjustment value
7 MG3R WB adjustment Point 3, R adjustment value
8 MG3G WB adjustment Point 3, G adjustment value
9 MG3B WB adjustment Point 3, B adjustment value
11 1 MG4R WB adjustment Point 4, R adjustment value Parameter for six-point adjustment
2 MG4G WB adjustment Point 4, G adjustment value
3 MG4B WB adjustment Point 4, B adjustment value
4 MG5R WB adjustment Point 5, R adjustment value
5 MG5G WB adjustment Point 5, G adjustment value
6 MG5B WB adjustment Point 5, B adjustment value
7 MG6R WB adjustment Point 6, R adjustment value
8 MG6G WB adjustment Point 6, G adjustment value
9 MG6B WB adjustment Point 6, B adjustment value
12 1 MODE SELECT
2 POS SELECT
3 POS MIN
4 POS MID1
5 POS MID2
6 POS MID3
7 POS MID4
8 POS MID5
9 POS MID6
10 POS MAX
13 1 CD MIN
2 CD MID1
3 CD MID2
4 CD MID3
5 CD MID4
6 CD MID5
7 CD MID6
8 CD MAX
14 1 CALC
2 RESET
3 VAL1
4 VAL2
5 VAL3
6 VAL4
7 VAL5
8 VAL6
5–6
LC-60LE632U/LC-70LE732U
Page Line Item Description Remarks (adjustment detail, etc.)
15 1 MONITOR TIME OUT
2 MONITOR MAX TEMP
3 MONITOR ERROR CAUSE RESET
16 1 LCD TEST PATTERN
2 LCD TEST PATTERN1
3 LCD TEST PATTERN2
4 LCD TEST PATTERN3
5 LCD TEST PATTERN4
6 TV TEST PATTERN 1
7 TV TEST PATTERN 2
17 1 T-CON VERSION EXT.1 PRIMROSE 2D Version
2 T-CON VERSION EXT.2 PRIMROSE 3D Version
3 T-CON VERSION EXT.3 Blank (Not Use)
4 T-CON VERSION EXT.4 Blank (Not Use)
18 1 READ/WRITE
2 SLAVE ADDRESS
3 RESISTER ADDRESS UPPER
4 RESISTER ADDRESS LOWER
5 WRITE DATA UPPER
6 WRITE DATA LOWER
7 READ DATA UPPER
8 READ DATA LOWER
19 1 POWER LED BRIGHTNESS
2 MENU LED BRIGHTNESS
3 INPUT LED BRIGHTNESS
4 CH UP LED BRIGHTNESS
5 CH DOWN LED BRIGHTNESS
6 VOL UP LED BRIGHTNESS
7 VOL DOWN LED BRIGHTNESS
8 LOGO LED BRIGHTNESS
9 ICON LED BRIGHTNESS
10 ICON LED BRIGHTNESS
(STANDBY)
11 3D LED BRIGHTNESS
20 1 POWER KEY SENSITIVITY
2 MENU KEY SENSITIVITY
3 INPUT KEY SENSITIVITY
4 CH UP KEY SENSITIVITY
5 CH DOWN KEY SENSITIVITY
6 VOL UP KEY SENSITIVITY
7 VOL DOWN KEY SENSITIVITY
21 1 KEY STRENGTH GET MODE
2 POWER KEY STRENGTH
3 MENU KEY STRENGTH
4 INPUT KEY STRENGTH
5 CH UP KEY STRENGTH
6 CH DOWN KEY STRENGTH
7 VOL UP KEY STRENGTH
8 VOL DOWN KEY STRENGTH
22 1 CROSSTALK ADJ MODE
2 CROSSTALK TH1
3 CROSSTALK TH2
4 CROSSTALK TH3
5 CROSSTALK TH4
6 CROSSTALK GAIN1
7 CROSSTALK GAIN2
8 CROSSTALK GAIN3
5–7
LC-60LE632U/LC-70LE732U
Page Line Item Description Remarks (adjustment detail, etc.)
23 1 WIFI SSID 2.4GHz Set AP SSID
2 WIFI SSID 5GHz Set AP SSID
3 WIFI RSSI 2.4GHz Set RSSI threshold
4 WIFI RSSI 5GHz Set RSSI threshold
5 WIFI TIME 2.4GHz Set Time Out
6 WIFI TIME 5GHz Set Time Out
7 WIFI RSSI TEST Execute test
8 WIFI RSSI RESULT Display test result
24 1 KEY LOCK (1217)
2 KOUTEI AREA ALL CLEAR
3 A MODE AREA CLEAR
4 BACKUP AREA CLEAR
5 B MODE AREA CLEAR
6 EXECUTION
25 1 ERROR STANDBY CAUSE1
2 ERROR STANDBY CAUSE2
3 ERROR STANDBY CAUSE3
4 ERROR STANDBY CAUSE4
5 ERROR STANDBY CAUSE5
6 ERROR STANDBY CAUSE RESET
26 1 EEP SAVE Writing setting values to EEPROM
2 EEP RECOVER Reading setting values from EEPROM
3 MODEL NAME
4 PANEL SIZE
5 SETTING FOR ADJ
6 PANEL LIMIT
7 PANEL RANGE LIMIT
8 SHORT CHECK MODE
9 SHORT CHECK CURRENT
10 CURRENT SW
11 TEST NETWORK UPDATE
5–8
LC-60LE632U/LC-70LE732U
*1 Details of P1.12 (NORMAL STANDBY CAUSE)
When TV set is powered off due to normal use or product specification, the last cause will be recorded.
The code, character string and description for the standby cause are below.
If you power off by remote, the cause will not be recorded.
5–9
LC-60LE632U/LC-70LE732U
6. Special features
* STANDBY CAUSE (Page 1/26)
Display of a cause (code) of the last standby
The cause of the last standby is recorded in EEPROM whenever possible.
Checking this code will be useful in finding a problem when you repair the troubled set.
* EEP SAVE (Page 26/26)
Storage of EEP adjustment value
* EEP RECOVER (Page 26/26)
Retrieval of EEP adjustment value from storage area
8. Signal adjustment
8.1. LCD section adjustment [LCD module adjustment]
1/2 1/2
1/2
1/2
5 – 10
LC-60LE632U/LC-70LE732U
8.2. Image adjustment
2 Automatic adjustment exe- Point the cursor to [ N358 ALL ADJ(INPUT2)] and press the [Enter] key.
cution The adjustment is complete when [ N358 ALL ADJ(INPUT2) OK] is displayed.
2 Automatic adjustment exe- Point the cursor to [ COMP15K ADJ(INPUT1)] and press the [Enter] key.
cution The adjustment is complete when [ COMP15K ADJ(INPUT1) OK] is displayed.
5 – 11
LC-60LE632U/LC-70LE732U
8.2.5 Component 33K signal adjustment
2 Automatic adjustment exe- Point the cursor to [ COMP33K ADJ(INPUT1)] and press the [Enter] key.
cution The adjustment is complete when [ COMP33K ADJ(INPUT1) OK] is displayed.
XGA (1024x768)
100% color bar
2 Automatic adjustment exe- Point the cursor to [ ANALOG RGB ADJ] and press the [Enter] key.
cution The adjustment is complete when [ ANALOG RGB ADJ OK] is displayed.
5 – 12
LC-60LE632U/LC-70LE732U
9. White balance adjustment
9.1. White balance adjustment (For details about the adjustment procedure, refer to “Kameyama Model Integrated Monitor
WB Adjustment Specification V1.92”.)
Adjustment
Adjustment conditions Adjustment procedure
point
1 Setting 1) Set the unit to the following conditions.
AV MODE: [DYNAMIC]
Backlight: +16
Active Backlight: OFF
Aging Time: Min. 60 minutes
2) Connect the unit with the white balance adjustment jig.
2 Automatic [Command] [Adjustment procedure]
adjustment exe- Process mode 1) Send the “adjustment process” code using the remote control.
cution KRSW0001 2) Set the point 6 to the specified gradation, specify the strongest color as the fixed
KKT10037 color, and adjust the RGB so that it becomes the standard value through negative
adjustment.
Setting 3) Set the point 5 to the specified gradation, set the G correction value (808 x G value of
KY0F0000 point 6/928) (fractions rounded off) and adjust the RB so that it becomes the standard
0SDS0001 value.
SBSL0016 4) Set the point 4 to the specified gradation, set the G correction value (696 x G value of
point 6/928) (fractions rounded off) and adjust the RB so that it becomes the standard
Multi-point adjustment mode value.
MSET0001 5) Set the point 3 to the specified gradation, set the G correction value (480 x G value of
point 6/928) (fractions rounded off) and adjust the RB so that it becomes the standard
Point 6 value.
LEV60232 6) Set the point 2 to the specified gradation, set the G correction value (236 x G value of
MG6G**** point 6/928) (fractions rounded off) and adjust the RB so that it becomes the standard
MG6B**** value.
MG6R**** 7) Set the point 1 to the specified gradation, set the G correction value (184 x G value of
point 6/928) (fractions rounded off) and adjust the RB so that it becomes the standard
Point 5 value.
LEV50202 8) Write the adjustment value by the MSET0003 command and turn off the AC power.
MG5G**** * RGB initial value of point 6: Set gradation 928
MG5B**** * RGB initial value of points 1 to 5: G correction value of each point
MG5R**** (At each point, make adjustment so that the remainder of the RGB adjustment value/
4 is equal.)
Point 4
LEV40174 [Adjustment value]
MG4G**** * According to the “Standard settings” submitted by the Technical Department
MG4B**** [LC60LE632U] teaching set
MG4R****
[Adjustment standard value]
Point 3 Measuring instrument: [Minolta CA-210] Technical measuring instrument
LEV30120 Level Reference value Adjustment spec Inspection spec
MG3G**** X=0.272
Point 6 928 ±0.0010 ±0.0020
MG3B**** y=0.277
MG3R**** X=0.272
Point 5 808 ±0.0010 ±0.0020
y=0.277
Point 2 X=0.272
Point 4 696 ±0.0015 ±0.0030
LEV20059 y=0.277
MG2G**** X=0.272
Point 3 480 ±0.0020 ±0.0040
MG2B**** y=0.277
MG2R**** X=0.272
Point 2 236 ±0.0030 ±0.0060
y=0.277
Point 1 X=0.272
Point 1 184 ±0.004 ±0.0080
LEV10046 y=0.277
MG1G**** Remarks Setting conditions for inspection
MG1B**** AV MODE: [DYNAMIC] (Reset)
MG1R**** Monochro: ON
Active Backlight: OFF
Writing Aging Time: Min. 60 minutes
MSET0003
5 – 13
LC-60LE632U/LC-70LE732U
10. Key writing
10.1. EDID writing (Main PWB: QPWBXF733WJN2)
5 – 14
LC-60LE632U/LC-70LE732U
[2] PUBLIC MODE SETTING PROCEDURE (LC-60LE632U)
1. How to start Public Mode
• There are the following two ways to get the public mode setup screen displayed.
In the adjustment process mode, turn on “PUBLIC MODE”. Also press the “CH ( )” and “VOL (+)” keys on the set at once and turn on the
power.
1) Press the “INPUT” and “VOL (+)” keys on the set at once and turn on the power.
2) Get the password input screen displayed.
Procedure
˴The input starts with the leftmost digit.
˴Use the numeric keys [1] thru [9] and [0] keys on the remote controller.
˴The other keys are not acceptable.
˴With a numeric-key input, "_" will change to "˴".
˴The input position will move one digit to the right.
˴With all the 3 digits entered, the password will be verified.
5 – 15
LC-60LE632U/LC-70LE732U
4. Public Mode Menu
The guidance is not displayed on screen.
Setup procedure
• To move the cursor up and down, use the “cursor UP/DOWN” key (remote controller) and “CH ( )/( )” key (remote controller and set).
• To change the settings, use the “cursor RIGHT/LEFT” key (remote controller) and “VOL (+)/(–)” key (remote controller and set).
• To save new settings, keep the cursor at “EXECUTE” and use “ENTER” key (remote controller and set).
PUBLIC MODE
POWER ON FIXED [VARIABLE ]
MAXIMUM VOLUME [ 60 ]
VOLUME FIXED [VARIABLE ]
VOLUME FIXED LEVEL [ 20 ]
RC BUTTON [RESPOND ]
PANEL BUTTON [RESPOND ]
MENU BUTTON [RESPOND ]
AV POSITION FIXED [VARIABLE ]
ON SCREEN DISPLAY [YES ]
INPUT MODE START [NORMAL ]
INPUT MODE FIXED [VARIABLE ]
LOUD SPEAKER [ON ]
RC_PATH_THROUGH [OFF ]
232C POWON [DISABLE ]
PUBLIC MODE [OFF ]
RESET
EXECUTE
5 – 16
LC-60LE632U/LC-70LE732U
5. On Setting Items
* “EZ-SETUP” discussed below indicates “EZ-SETUP after the first power-on”.
1) POWER ON FIXED
2) MAXIMUM VOLUME
3) VOLUME FIXED
Selection Selection between “Variable”, “Fixed”, “ACON (AC CTRL)” and “AC/RCON (AC/RC CTRL)” (loop provided)
Default Variable
Explanation • FIXED: Fixed at the level adjusted for a fixed volume.
• AC CTRL: Start-up at the level specified for a fixed volume at ACON.
• AC/RC CTRL: Start-up at the level specified for a fixed volume at start.
Limit in Setting • The sound volume for the ON-timer (Wake up timer) is fixed also without display of menu. Besides, the setting is made
impossible. (Basically, the menu is not displayed.)
• The following keys become invalid:
• Sound volume Up/Down (VOL +/–) [for both remote control and the unit]
• Mute (MUTE)
Exception • In the item “VOLUME” of adjustment process, the sound volume can be set freely irrespective of this setting.
Remarks • As for sound volume fixing and sound volume MAX level, the sound volume fixing has priority.
• Once the sound volume has been changed by adjustment process, it should be set back to the sound volume preset by
sound volume fixing level when the adjustment process ends.
5) RC BUTTON
Selection Selection between “Respond”, “No Respond” and “Limited” (loop provided)
Default Respond
Explanation Making the remote controller settings.
• At the “No Respond” setting, the remote controller keys are disabled. Its power key (reception/standby key) is disabled too.
• At the “Limited” setting, some channel-related keys alone are operative. All the other remote controller keys (power, volume
/ , channel / , light control (brightness sensor), broadcast select) are inoperative.
Limit in Setting In “No respond” setting, all the keys (including the power key) are not accepted.
Exception • Adjustment process, inspection process and hotel only keys are valid irrespective of setting.
• All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
Remarks
5 – 17
LC-60LE632U/LC-70LE732U
6) PANEL BUTTON
7) MENU BUTTON
8) ON SCREEN DISPLAY
Selection Selection between “Normal”, “Air ( )”, “INPUT 1/2/3”, “PC”, “HDMI 1/2/3/4/5”, “DVI” (loop provided)
Default Normal
Explanation In power-ON, the input source to be started or channel can be set.
(In standard mode, the operation follows the last memory.)
About options • All the input sources in the model are made selectable.
• In TV mode, the channel to be set follows the last memory and the content of the last memory is included in the notation by
options. Ex.) Air (2), Cable (98.1) etc.
Limit in Setting • The display of channel setting menu and the channel setting operation are prohibited.
Exception
Remarks • In setting at “Normal”, the setting of “Input mode fixed” is changed to “Variable” and selection should be prohibited.
5 – 18
LC-60LE632U/LC-70LE732U
10)INPUT MODE FIXED
Selection Selection between “Variable”, “Fixed”, “ACON (AC CTRL)” and “AC/RCON (AC/RC CTRL)” (loop provided)
Default – (Variable)
Explanation • At the “Fixed” setting, the TV set gets started with the settings of “Input mode start”, and then any other channels and inputs
are not accepted.
• At the “ACON (AC CTRL)” setting, the TV set gets started with the settings of “Input mode start” under AC control.
• At the “AC/RCON (AC/RC CTRL)” setting, the TV set gets started with the settings of “Input mode start” under either control.
Limit in Setting • With the execution of hotel mode, the input source is forced to change to that set by “Input mode start” and the channel
switching and input switching are prohibited thereafter.
• ON-timer's (Wake-up timer) channel items are not displayed or the operation is prohibited. (Basically, they are not displayed.)
• The following keys are invalidated.
CH / , direct tuning button, FLASHBACK, input
However, the keys (input switching and CH / keys) of the unit for menu operation remain valid.
Exception None
Remarks • In the following case, setting is cancelled and mode is changed to “Variable”.
When the setting of “Input mode start” is set to “Normal”.
11)RC_PATH_THROUGH
Selection Selection between “OFF”, “ON: TV RCE” and “ON: TV RCD” (loop provided)
Default OFF
Explanation Function to feed the remote controller-received signal to Pin 9 (open) on the RS232C.
Limit in Setting None
Exception None
Remarks None
14)232C POWON
5 – 19
LC-60LE632U/LC-70LE732U
15)PUBLIC MODE (ON/OFF)
5 – 20
LC-60LE632U/LC-70LE732U
[3] ADJUSTMENT PROCEDURE (LC-70LE732U)
The adjustment values are set to the optimum conditions at the factory before shipping. If a value should become improper or an adjustment is
required due to part replacement, make an adjustment according to the following procedure.
1. After replacement of any PWB unit and/or IC for repair, please note the following.
• When replacing the following units, make sure to prepare the new units loaded with updated software.
• When replacing the LCD control PWB, perform the VCOM adjustment.
2.2.2 Preparations
To upgrade the main software, it is necessary to get ready the USB Memory for version upgrade before you start.
Follow the steps below and create the USB Memory for version upgrade.
1. Copy the file BSMK_632-732_xxx.USB for version upgrade to the root directory (folder) of the USB Memory.
NOTE: In the USB Memory drive, do not store other folders or unrelated files, or more than one file for version upgrade.
Now the USB Memory for version upgrade is ready.
5 – 21
LC-60LE632U/LC-70LE732U
2.2.3 How to upgrade the software
1. Unplug the AC cord.
2. Insert the USB Memory for version upgrade into the service socket.
3. Plug in the AC cord with power button pressed down.
4. After 5 seconds, unpress the power button.
5. After the unit startup, the system upgrade screen as shown below within 20-40 seconds.
Software Update
70LE732U
MAIN 50%
SUB MICOM NO DATA
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version U1007071
SUB MICOM Version 㧙㧙㧙㧙㧙
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
6. Even a single failure in the process will trigger the upgrade failure screen.
Software Update
70LE732U
UPGRADE FAILURE
MAIN Project ID
SUB MICOM NO DATA
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version 㧙㧙㧙㧙㧙
SUB MICOM Version 㧙㧙㧙㧙㧙
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
NOTE: In the event of a failure, repeat the upgrade process. If the process repeatedly fails, it is likely that the hardware need fixing.
7. Upon completion of the whole process, the upgrade success screen as shown below appears. You can check the new software version on this
screen. The version information appears after the upgrade is complete.
Software Update
70LE732U
UPGRADE SUCCESS
MAIN 100%
SUB MICOM NO DATA
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version U1007071
SUB MICOM Version 㧙㧙㧙㧙㧙
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
8. Unplug the AC cord and remove the USB Memory for version upgrade.
9. Now the software version upgrade is complete.
NOTE: When you are done with the software version upgrade, start the set, go to the top page of the adjustment process screen and check the main
software version information.
5 – 22
LC-60LE632U/LC-70LE732U
2.3. Monitor microprocessor software version upgrade
Create the USB memory for monitor microprocessor software version upgrade in the same manner as explained in the “Main software version
upgrade”.
Copy the file BSMK_632-732_xxx.USB and BMSDMxxx.SMB. (named temporarily) for monitor microprocessor software version upgrade to the USB
memory.
Software Update
70LE732U
MAIN NO DATA
SUB MICOM 50%
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version 㧙㧙㧙㧙㧙
SUB MICOM Version 0.820
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
6. If the upgrade fails, power led will stop blinking. Also, the upgrade failure screen will be shown if upgrade screen was shown at 5.
Software Update
70LE732U
UPGRADE FAILURE
MAIN NO DATA
SUB MICOM SAME VERSION
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version 㧙㧙㧙㧙㧙
SUB MICOM Version 㧙㧙㧙㧙㧙
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
NOTE: In the event of a transient failure, upgrade will be automatically retried up to three times. If the process repeatedly fails, hardware may be the
cause.
7. The upgrade success screen will be shown if upgrade screen was shown at 5.
Software Update
70LE732U
UPGRADE SUCCESS
MAIN NO DATA
SUB MICOM 100%
PANEL EEPROM NO DATA
IR MICOM OK
MAIN Version 㧙㧙㧙㧙㧙
SUB MICOM Version 0.820
PANEL EEPROM 㧙㧙㧙㧙
IR MICOM Version 1.00
8. Unplug the AC cord and remove the USB Memory for version upgrade.
9. Now the software version upgrade is complete.
NOTE: When you are done with the software version upgrade, start the set, go to the top page of the adjustment process screen and check the mon-
itor microprocessor software version information and panel size information.
5 – 23
LC-60LE632U/LC-70LE732U
3. Entering and exiting the adjustment process mode
1) Before entering the adjustment process mode, the AV position RESET in the video adjustment menu.
2) While holding down the “VOL (–)” and “INPUT” keys at a time, plug in the AC cord of the main unit to turn on the power.
The letter “<K>” appears on the screen.
3) Next, hold down the “VOL (–)” and “CH ( )” keys at a time.
(The “VOL (–)” and “CH ( )” keys should be pressed and held until the display appears.)
Multiple lines of blue characters appearing on the display indicate that the unit is now in the adjustment process mode.
When you fail to enter the adjustment process mode (the display is the same as normal startup), retry the procedure.
4) To exit the adjustment process mode after the adjustment is done, unplug the AC cord from the outlet to make a forced shutdown. (When the
power was turned off with the remote controller, once unplug the AC cord and plug it again. In this case, wait 10 seconds or so before plugging.)
CAUTION: Use due care in handling the information described here lest your users should know how to enter the adjustment process mode. If the
settings are tampered in this mode, unrecoverable system damage may result.
4. Remote controller key operation and description of display in adjustment process mode
1) Key operation
*Input mode is switched automatically when relevant adjustment is started so far as the necessary input signal is available.
2) Description of display
TEMPERATURE 73
LAMP ERROR 0
3) 11 B00000040:36 4) 11 B00000040:35
5 – 24
LC-60LE632U/LC-70LE732U
5. List of adjustment process mode menu
The character string in brackets [ ] will appear as a page title in the adjustment process menu header.
5 – 25
LC-60LE632U/LC-70LE732U
Page Line Item Description Remarks (adjustment detail, etc.)
7 1 ANALOG RGB ADJ Analog RGB picture level adjustment
2 R A_GAIN
3 G A_GAIN
4 B A_GAIN
5 R OFFSET
6 G OFFSET
7 B OFFSET
8 1 VCOM ADJ VCOM adjustment value
9 1 LEV1 Standard value 1 Adjustment gradation setting.
2 LEV2 Standard value 2
3 LEV3 Standard value 3
4 LEV4 Standard value 4
5 LEV5 Standard value 5
6 LEV6 Standard value 6
10 1 MG1R WB adjustment Point 1, R adjustment value Parameter for six-point adjustment
2 MG1G WB adjustment Point 1, G adjustment value
3 MG1B WB adjustment Point 1, B adjustment value
4 MG1Y WB adjustment Point 1, Y adjustment value
5 MG2R WB adjustment Point 2, R adjustment value
6 MG2G WB adjustment Point 2, G adjustment value
7 MG2B WB adjustment Point 2, B adjustment value
8 MG2Y WB adjustment Point 2, Y adjustment value
9 MG3R WB adjustment Point 3, R adjustment value
10 MG3G WB adjustment Point 3, G adjustment value
11 MG3B WB adjustment Point 3, B adjustment value
12 MG3Y WB adjustment Point 3, Y adjustment value
11 1 MG4R WB adjustment Point 4, R adjustment value Parameter for six-point adjustment
2 MG4G WB adjustment Point 4, G adjustment value
3 MG4B WB adjustment Point 4, B adjustment value
4 MG4Y WB adjustment Point 4, Y adjustment value
5 MG5R WB adjustment Point 5, R adjustment value
6 MG5G WB adjustment Point 5, G adjustment value
7 MG5B WB adjustment Point 5, B adjustment value
8 MG5Y WB adjustment Point 5, Y adjustment value
9 MG6R WB adjustment Point 6, R adjustment value
10 MG6G WB adjustment Point 6, G adjustment value
11 MG6B WB adjustment Point 6, B adjustment value
12 MG6Y WB adjustment Point 6, Y adjustment value
13 MG6Y OFFSET
12 1 MODE SELECT
2 POS SELECT
3 POS MIN
4 POS MID1
5 POS MID2
6 POS MID3
7 POS MID4
8 POS MID5
9 POS MID6
10 POS MAX
13 1 CD MIN
2 CD MID1
3 CD MID2
4 CD MID3
5 CD MID4
6 CD MID5
7 CD MID6
8 CD MAX
5 – 26
LC-60LE632U/LC-70LE732U
Page Line Item Description Remarks (adjustment detail, etc.)
14 1 CALC
2 RESET
3 VAL1
4 VAL2
5 VAL3
6 VAL4
7 VAL5
8 VAL6
15 1 MONITOR TIME OUT
2 MONITOR MAX TEMP
3 MONITOR ERROR CAUSE RESET
16 1 LCD TEST PATTERN
2 LCD TEST PATTERN1
3 LCD TEST PATTERN2
4 LCD TEST PATTERN3
5 LCD TEST PATTERN4
6 TV TEST PATTERN 1
7 TV TEST PATTERN 2
17 1 T-CON VERSION EXT.1 PRIMROSE 2D Version
2 T-CON VERSION EXT.2 PRIMROSE 3D Version
3 T-CON VERSION EXT.3 Blank (Not Use)
4 T-CON VERSION EXT.4 Blank (Not Use)
18 1 READ/WRITE
2 SLAVE ADDRESS
3 RESISTER ADDRESS UPPER
4 RESISTER ADDRESS LOWER
5 WRITE DATA UPPER
6 WRITE DATA LOWER
7 READ DATA UPPER
8 READ DATA LOWER
19 1 POWER LED BRIGHTNESS
2 MENU LED BRIGHTNESS
3 INPUT LED BRIGHTNESS
4 CH UP LED BRIGHTNESS
5 CH DOWN LED BRIGHTNESS
6 VOL UP LED BRIGHTNESS
7 VOL DOWN LED BRIGHTNESS
8 LOGO LED BRIGHTNESS
9 ICON LED BRIGHTNESS
10 ICON LED BRIGHTNESS
(STANDBY)
11 3D LED BRIGHTNESS
20 1 POWER KEY SENSITIVITY
2 MENU KEY SENSITIVITY
3 INPUT KEY SENSITIVITY
4 CH UP KEY SENSITIVITY
5 CH DOWN KEY SENSITIVITY
6 VOL UP KEY SENSITIVITY
7 VOL DOWN KEY SENSITIVITY
21 1 KEY STRENGTH GET MODE
2 POWER KEY STRENGTH
3 MENU KEY STRENGTH
4 INPUT KEY STRENGTH
5 CH UP KEY STRENGTH
6 CH DOWN KEY STRENGTH
7 VOL UP KEY STRENGTH
8 VOL DOWN KEY STRENGTH
22 1 CROSSTALK ADJ MODE
2 CROSSTALK TH1
3 CROSSTALK TH2
4 CROSSTALK TH3
5 CROSSTALK TH4
6 CROSSTALK GAIN1
7 CROSSTALK GAIN2
8 CROSSTALK GAIN3
5 – 27
LC-60LE632U/LC-70LE732U
Page Line Item Description Remarks (adjustment detail, etc.)
23 1 WIFI SSID 2.4GHz Set AP SSID
2 WIFI SSID 5GHz Set AP SSID
3 WIFI RSSI 2.4GHz Set RSSI threshold
4 WIFI RSSI 5GHz Set RSSI threshold
5 WIFI TIME 2.4GHz Set Time Out
6 WIFI TIME 5GHz Set Time Out
7 WIFI RSSI TEST Execute test
8 WIFI RSSI RESULT Display test result
24 1 KEY LOCK (1217)
2 KOUTEI AREA ALL CLEAR
3 A MODE AREA CLEAR
4 BACKUP AREA CLEAR
5 B MODE AREA CLEAR
6 EXECUTION
25 1 ERROR STANDBY CAUSE1
2 ERROR STANDBY CAUSE2
3 ERROR STANDBY CAUSE3
4 ERROR STANDBY CAUSE4
5 ERROR STANDBY CAUSE5
6 ERROR STANDBY CAUSE RESET
26 1 EEP SAVE Writing setting values to EEPROM
2 EEP RECOVER Reading setting values from EEPROM
3 MODEL NAME
4 PANEL SIZE
5 SETTING FOR ADJ
6 PANEL LIMIT
7 PANEL RANGE LIMIT
8 SHORT CHECK MODE
9 SHORT CHECK CURRENT
10 CURRENT SW
11 TEST NETWORK UPDATE
5 – 28
LC-60LE632U/LC-70LE732U
*1 Details of P1.12 (NORMAL STANDBY CAUSE)
When TV set is powered off due to normal use or product specification, the last cause will be recorded.
The code, character string and description for the standby cause are below.
If you power off by remote, the cause will not be recorded.
5 – 29
LC-60LE632U/LC-70LE732U
6. Special features
* STANDBY CAUSE (Page 1/26)
Display of a cause (code) of the last standby
The cause of the last standby is recorded in EEPROM whenever possible.
Checking this code will be useful in finding a problem when you repair the troubled set.
* EEP SAVE (Page 26/26)
Storage of EEP adjustment value
* EEP RECOVER (Page 26/26)
Retrieval of EEP adjustment value from storage area
8. Signal adjustment
8.1. LCD section adjustment [LCD module adjustment]
1/2 1/2
1/2
1/2
5 – 30
LC-60LE632U/LC-70LE732U
8.2. Image adjustment
2 Automatic adjustment exe- Point the cursor to [ N358 ALL ADJ(INPUT2)] and press the [Enter] key.
cution The adjustment is complete when [ N358 ALL ADJ(INPUT2) OK] is displayed.
2 Automatic adjustment exe- Point the cursor to [ COMP15K ADJ(INPUT1)] and press the [Enter] key.
cution The adjustment is complete when [ COMP15K ADJ(INPUT1) OK] is displayed.
5 – 31
LC-60LE632U/LC-70LE732U
8.2.5 Component 33K signal adjustment
2 Automatic adjustment exe- Point the cursor to [ COMP33K ADJ(INPUT1)] and press the [Enter] key.
cution The adjustment is complete when [ COMP33K ADJ(INPUT1) OK] is displayed.
XGA (1024x768)
100% color bar
2 Automatic adjustment exe- Point the cursor to [ ANALOG RGB ADJ] and press the [Enter] key.
cution The adjustment is complete when [ ANALOG RGB ADJ OK] is displayed.
5 – 32
LC-60LE632U/LC-70LE732U
9. White balance adjustment
9.1. White balance adjustment (For details about the adjustment procedure, refer to “Kameyama Model Integrated Monitor
WB Adjustment Specification V1.92”.)
Adjustment
Adjustment conditions Adjustment procedure
point
1 Setting 1) Set the unit to the following conditions.
AV MODE: [DYNAMIC]
Backlight: +16
Active Backlight: OFF
Aging Time: Min. 60 minutes
2) Connect the unit with the white balance adjustment jig.
2 Automatic [Command] [Adjustment procedure]
adjustment exe- Process mode 1) Send the “adjustment process” code using the remote control.
cution KRSW0001 2) Set the point 6 to the specified gradation, specify the strongest color as the fixed
KKT10037 color, and adjust the RGB so that it becomes the standard value through negative
adjustment.
Setting Then compare the R and G values; based on the result, calculate the Ye value in the
KY0F0000 following conditions.
0SDS0001 R > G: Ye = G x 1.05
SBSL0016 R G: Ye = R x 1.05
* If the Ye value exceeds the initial value (input gradation x 4), it is rounded to that
Multi-point adjustment mode value or less.
MSET0011 3) Set the point 5 to the specified gradation, set the G correction value (692 x G value of
point 6/916) (fractions rounded off) and the Ye correction value (692 x Ye value of
Point 6 point 6/916) (fractions rounded off), and adjust the RB so that it becomes the stan-
LEV60229 dard value.
MG6G**** 4) Set the point 4 to the specified gradation, set the G correction value (532 x G value of
MG6B**** point 6/916) (fractions rounded off) and the Ye correction value (532 x Ye value of
MG6R**** point 6/916) (fractions rounded off), and adjust the RB so that it becomes the stan-
MG6Y**** dard value.
5) Set the point 3 to the specified gradation, set the G correction value (464 x G value of
Point 5 point 6/916) (fractions rounded off) and the Ye correction value (464 x Ye value of
LEV50173 point 6/916) (fractions rounded off), and adjust the RB so that it becomes the stan-
MG5G**** dard value.
MG5B**** 6) Set the point 2 to the specified gradation, set the G correction value (296 x G value of
MG5R**** point 6/916) (fractions rounded off) and the Ye correction value (296 x Ye value of
MG5Y**** point 6/916) (fractions rounded off), and adjust the RB so that it becomes the stan-
dard value.
Point 4 7) Set the point 1 to the specified gradation, set the G correction value (180 x G value of
LEV40133 point 6/916) (fractions rounded off) and the Ye correction value (180 x Ye value of
MG4G**** point 6/916) (fractions rounded off), and adjust the RB so that it becomes the stan-
MG4B**** dard value.
MG4R**** 8) Write the adjustment value by the MSET0003 command and turn off the AC power.
MG4Y**** * RGB initial value of point 6: Set gradation 916
* RGB initial value of points 1 to 5: G correction value of each point
Point 3 (At each point, make adjustment so that the remainder of the RGB adjustment value/
LEV30116 4 is equal.)
MG3G**** [Adjustment value]
MG3B**** * According to the “Standard settings” submitted by the Technical Department
MG3R**** [LC52LE810UN] LE810 model teaching set
MG3Y****
Point 2
LEV20074
MG2G****
MG2B****
MG2R****
MG2Y****
Point 1
LEV10045
MG1G****
MG1B****
MG1R****
MG1Y****
Writing
MSET0003
5 – 33
LC-60LE632U/LC-70LE732U
Adjustment
Adjustment conditions Adjustment procedure
point
[Adjustment standard value]
Measuring instrument: [Minolta CA-210] Technical measuring instrument
Level Reference value Adjustment spec Inspection spec
X=0.272
Point 6 916 ±0.0010 ±0.0020
y=0.277
X=0.272
Point 5 692 ±0.0010 ±0.0020
y=0.277
X=0.272
Point 4 532 ±0.0015 ±0.0030
y=0.277
X=0.272
Point 3 464 ±0.0020 ±0.0040
y=0.277
X=0.272
Point 2 296 ±0.0030 ±0.0060
y=0.277
X=0.272
Point 1 180 ±0.004 ±0.0080
y=0.277
Remarks Setting conditions for inspection
AV MODE: [DYNAMIC] (Reset)
Monochro: ON
Active Backlight: OFF
Aging Time: Min. 60 minutes
5 – 34
LC-60LE632U/LC-70LE732U
11. Factory setting
After completing the factory setting, pull out the AC cord to complete the setting.
CAUTION: Do not turn on the power after completing the factory setting. If the power is turned on, configure the factory setting again.
5 – 35
LC-60LE632U/LC-70LE732U
[4] PUBLIC MODE SETTING PROCEDURE (LC-70LE732U)
1. How to start Public Mode
• There are the following two ways to get the public mode setup screen displayed.
In the adjustment process mode, turn on “PUBLIC MODE”. Also press the “CH ( )” and “VOL (+)” keys on the set at once and turn on the
power.
1) Press the “INPUT” and “VOL (+)” keys on the set at once and turn on the power.
2) Get the password input screen displayed.
Procedure
˴The input starts with the leftmost digit.
˴Use the numeric keys [1] thru [9] and [0] keys on the remote controller.
˴The other keys are not acceptable.
˴With a numeric-key input, "_" will change to "˴".
˴The input position will move one digit to the right.
˴With all the 3 digits entered, the password will be verified.
5 – 36
LC-60LE632U/LC-70LE732U
4. Public Mode Menu
The guidance is not displayed on screen.
Setup procedure
• To move the cursor up and down, use the “cursor UP/DOWN” key (remote controller) and “CH ( )/( )” key (remote controller and set).
• To change the settings, use the “cursor RIGHT/LEFT” key (remote controller) and “VOL (+)/(–)” key (remote controller and set).
• To save new settings, keep the cursor at “EXECUTE” and use “ENTER” key (remote controller and set).
PUBLIC MODE
POWER ON FIXED [VARIABLE ]
MAXIMUM VOLUME [ 60 ]
VOLUME FIXED [VARIABLE ]
VOLUME FIXED LEVEL [ 20 ]
RC BUTTON [RESPOND ]
PANEL BUTTON [RESPOND ]
MENU BUTTON [RESPOND ]
AV POSITION FIXED [VARIABLE ]
ON SCREEN DISPLAY [YES ]
INPUT MODE START [NORMAL ]
INPUT MODE FIXED [VARIABLE ]
LOUD SPEAKER [ON ]
RC_PATH_THROUGH [OFF ]
232C POWON [DISABLE ]
PUBLIC MODE [OFF ]
RESET
EXECUTE
5 – 37
LC-60LE632U/LC-70LE732U
5. On Setting Items
* “EZ-SETUP” discussed below indicates “EZ-SETUP after the first power-on”.
1) POWER ON FIXED
2) MAXIMUM VOLUME
3) VOLUME FIXED
Selection Selection between “Variable”, “Fixed”, “ACON (AC CTRL)” and “AC/RCON (AC/RC CTRL)” (loop provided)
Default Variable
Explanation • FIXED: Fixed at the level adjusted for a fixed volume.
• AC CTRL: Start-up at the level specified for a fixed volume at ACON.
• AC/RC CTRL: Start-up at the level specified for a fixed volume at start.
Limit in Setting • The sound volume for the ON-timer (Wake up timer) is fixed also without display of menu. Besides, the setting is made
impossible. (Basically, the menu is not displayed.)
• The following keys become invalid:
• Sound volume Up/Down (VOL +/–) [for both remote control and the unit]
• Mute (MUTE)
Exception • In the item “VOLUME” of adjustment process, the sound volume can be set freely irrespective of this setting.
Remarks • As for sound volume fixing and sound volume MAX level, the sound volume fixing has priority.
• Once the sound volume has been changed by adjustment process, it should be set back to the sound volume preset by
sound volume fixing level when the adjustment process ends.
5) RC BUTTON
Selection Selection between “Respond”, “No Respond” and “Limited” (loop provided)
Default Respond
Explanation Making the remote controller settings.
• At the “No Respond” setting, the remote controller keys are disabled. Its power key (reception/standby key) is disabled too.
• At the “Limited” setting, some channel-related keys alone are operative. All the other remote controller keys (power, volume
/ , channel / , light control (brightness sensor), broadcast select) are inoperative.
Limit in Setting In “No respond” setting, all the keys (including the power key) are not accepted.
Exception • Adjustment process, inspection process and hotel only keys are valid irrespective of setting.
• All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting.
Remarks
5 – 38
LC-60LE632U/LC-70LE732U
6) PANEL BUTTON
7) MENU BUTTON
8) ON SCREEN DISPLAY
Selection Selection between “Normal”, “Air ( )”, “INPUT 1/2/3”, “PC”, “HDMI 1/2/3/4/5”, “DVI” (loop provided)
Default Normal
Explanation In power-ON, the input source to be started or channel can be set.
(In standard mode, the operation follows the last memory.)
About options • All the input sources in the model are made selectable.
• In TV mode, the channel to be set follows the last memory and the content of the last memory is included in the notation by
options. Ex.) Air (2), Cable (98.1) etc.
Limit in Setting • The display of channel setting menu and the channel setting operation are prohibited.
Exception
Remarks • In setting at “Normal”, the setting of “Input mode fixed” is changed to “Variable” and selection should be prohibited.
5 – 39
LC-60LE632U/LC-70LE732U
10)INPUT MODE FIXED
Selection Selection between “Variable”, “Fixed”, “ACON (AC CTRL)” and “AC/RCON (AC/RC CTRL)” (loop provided)
Default – (Variable)
Explanation • At the “Fixed” setting, the TV set gets started with the settings of “Input mode start”, and then any other channels and inputs
are not accepted.
• At the “ACON (AC CTRL)” setting, the TV set gets started with the settings of “Input mode start” under AC control.
• At the “AC/RCON (AC/RC CTRL)” setting, the TV set gets started with the settings of “Input mode start” under either control.
Limit in Setting • With the execution of hotel mode, the input source is forced to change to that set by “Input mode start” and the channel
switching and input switching are prohibited thereafter.
• ON-timer's (Wake-up timer) channel items are not displayed or the operation is prohibited. (Basically, they are not displayed.)
• The following keys are invalidated.
CH / , direct tuning button, FLASHBACK, input
However, the keys (input switching and CH / keys) of the unit for menu operation remain valid.
Exception None
Remarks • In the following case, setting is cancelled and mode is changed to “Variable”.
When the setting of “Input mode start” is set to “Normal”.
11)RC_PATH_THROUGH
Selection Selection between “OFF”, “ON: TV RCE” and “ON: TV RCD” (loop provided)
Default OFF
Explanation Function to feed the remote controller-received signal to Pin 9 (open) on the RS232C.
Limit in Setting None
Exception None
Remarks None
14)232C POWON
5 – 40
LC-60LE632U/LC-70LE732U
15)PUBLIC MODE (ON/OFF)
5 – 41
LC-60LE632U/LC-70LE732U
CHAPTER 6. TROUBLESHOOTING TABLE
LC-60LE632U
Service Manual
Yes
Is the Center Icon flashing? Check "[2] LED flashing specification at the time of an error (Center icon LED used)".
No
Yes
No
Is the Backlight lighting? Check "LED Backlight does not turn on.".
Yes
Check "Picture does not display.".
[2] LED flashing specification at the time of an error (Center icon LED used) (LC-60LE632U)
1. Display method
• Since only the center icon LED can be used, slow flashing and fast flashing are combined.
• Refer to Table 1.
• The Start from the detail display. (No outline display)
• After recovering from an error, if the same error cannot be generated again, refer to MONITOR ERR CAUSE on the process screen.
• During version upgrade, the brightness of the flashing LED changes smoothly.
• When completing version upgrade, the brightness of the LED changes in a staircase pattern.
Center icon ON
OFF
1600ms 1600ms
400ms
400ms 300ms
100ms
500ms
500ms
ON
Center icon OFF
6–1
LC-60LE632U/LC-70LE732U
Table 1. Concrete flashing pattern
Detail display
Item Cause
Slow flashing Fast flashing
Inverter/Lamp system failure Flashes once Flashes once Lamp error
Power PWB Flashes twice Flash once Power supply error 2 (*2) AC_DET error
failure Flash twice Power supply error 2 (*2) UR+13V error
(Power failure, etc.) Flash 3 times Power supply error 2 (*2) D+3.3V error
Flash 5 times Panel power supply error
Main PWB Flashes 3 times Flashes once Initial communication error
failure Flashes twice Start-up confirmation communication error
(Communication Flashes 3 times Regular communication error
failure, etc.) Flashes 5 times Other communication error
Others Flashes 4 times Flashes once Temperature error
Flashes twice Sync error
Flashes 3 times Notification from the main microcomputer (*3)
VerUP executing Flashes smoothly None Version upgrading
VerUP succeeded Flashes in a staircase pattern None Version upgrade succeeded
VerUP failed None Flashes continuously Version upgrade failed
ROM data failure None Flashes continuously Start-up after failing version upgrade (*4)
*2: They depend on the system. Power supply error is defined from product to product.
*3: For details, refer to ERROR STANDBY CAUSE on the adjustment process screen.
*4: If the boot section is abnormal, there is no flashing (flashing impossible).
3. New method
Center icon
1600ms 1600ms
400ms
400ms 300ms
100ms
Center icon
500ms
500ms
Center icon
6–2
LC-60LE632U/LC-70LE732U
LED flashing timing chart at the time of an error
1) Inverter/Lamp failure details (Flashes slowly once and flashes fast) Note
2) Power failure details (Flashes slowly twice and flashes fast) Note
3) Communication failure details (Flashes slowly 3 times and flashes fast) Note
6–3
LC-60LE632U/LC-70LE732U
4) Other failure details (Flashes slowly 4 times and flashes fast) Note
6–4
LC-60LE632U/LC-70LE732U
[3] TROUBLESHOOTING TABLE (LC-60LE632U)
• LED Backlight does not turn on.
Do you start?
YES
When main unit is replaced, does it start normally?
YES NO
Replace main unit. en LCD control unit is replaced, does it start normally?
YES
Replace LCD control unit.
NO
When the parts in the panel can be replaced. →Replace all LED-bars in the panel module.
When the parts in the panel cannot be replaced. →Replace panel module.
Do you start?
NO
When power supply unit is replaced, does it start normally?
YES
Replace power supply unit.
NO
When main unit is replaced, does it start normally?
YES
Replace main unit.
NO
When LCD control unit is replaced, does it start normally?
YES
Replace LCD control unit.
NO
When the parts in the panel can be replaced. →Replace all LED-bars in the panel module.
When the parts in the panel cannot be replaced. →Replace panel module.
6–5
LC-60LE632U/LC-70LE732U
YES
Replace C-S FPC.
NO
When C-PWB is replaced, does screen display normally?
YES
Replace C-PWB.
(Adjust “VCOM ADJ” after replace C-PWB)
NO
Replace Panel HIRAKI.
(Adjust “VCOM ADJ” after replace Panel HIRAKI)
6–6
LC-60LE632U/LC-70LE732U
No video (1)
COMPOSITE: No external input video [INPUT-6] COMPOSITE: No external input video [INPUT-7]
Is INPUT-6 selected on the input select menu screen? Is INPUT-7 selected on the input select menu screen?
NO NO
Select INPUT-6 on the input select menu Select INPUT-7 on the input select menu
screen for the right input signal. screen for the right input signal.
YES YES
Is there the COMPOSITE signal input at pin (AJ23) of Is there the COMPOSITE signal input at pin (AK22) of IC3303
IC3303 (CPU)? (CPU)?
NO NO
Check the line between pin (10) of J510 Check the line between pin (5) of J510 and
and pin (AJ23) of IC3303. pin (AK22) of IC3303.
YES YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no problem in
the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6–7
LC-60LE632U/LC-70LE732U
No video (2)
NO
Select INPUT-5 on the input select menu screen for the
right input signal.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no prob-
lem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6–8
LC-60LE632U/LC-70LE732U
No video (3)
No video at UHF/VHF broadcast signal reception No video at digital broadcast signal reception
Is there the analog video signal output (CVBS) at pin (9) of Are there the IF signal outputs (D_IF+/-) at the pins (11) and (10) of tuner
tuner (TU1105)? (TU1105)?
NO NO
Check TU1105 and its peripheral circuits Check the line between TU1105 and IC4405, and
(TU_SDATA: Pin4 of TU1105 their peripheral circuits (C4463/C4464/R1158, etc.).
TU_SCLK: Pin5 of TU1105, etc.).
YES YES
Is there the analog video signal input at pin (AK24) of IC3303 Are there the TS signal outputs (ATSC_TS_D0/SYNC/CLK/VAL) at the
(CPU)? pins (33), (34), (37) and (38) of Demodulator (IC4405)?
NO NO
Check the line between IC3303 and TU1105, and Check the line between IC4405 and IC3303, and
their peripheral circuits. their peripheral circuits (R4450/R3365/R3432, etc.).
YES YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no
problem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6–9
LC-60LE632U/LC-70LE732U
No video (4)
NO
Select INPUT-8 on the input select menu screen for the right input signal.
Is IC1504 (HDMI switch) accessed by I2C, with PC connected, to read the VGA_SCL/SDA data?
Check the DDC line and its peripheral circuits. (IC1504 and its peripherals).
YES
Are there the video signal inputs at pins (AK15) (G), (AK13) (B) and (AM15) (R) of IC3303 (CPU)?
Are there the VSYNC/HSYNC signal inputs at pins (AM13) and (AL13) of IC3303?
NO
Check the line between SC501 and IC3303.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no problem
in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 10
LC-60LE632U/LC-70LE732U
Is INPUT-1 selected on the input select menu screen? NO Select INPUT-1 on the input select menu screen
for the right input signal.
YES
Does the HOT PLUG detection function? Check the line between the input terminals of
NO SC1503 and IC1504.
Does the DDC5V signal come from pin (18) of SC1503 to pin (60) of IC1504 Check IC1504 and its peripheral circuits
(HDMI_SW)? (SDA1_400K: pin70 of IC1504/SCL1_400K: pin71
of IC1504, etc.).
YES
Does the HPD signal come from pin (59) of IC1504 to pin (19) of SC1503? NO Check the line between the pin (59) of IC1504 and
the pin (19) of SC1503.
NO
Check the DDC line and its peripheral circuits.
(IC1504 and its peripherals).
YES
Are there the all of TMDS inputs at pins (AM9/AL9) (CLK-/+), (AM10/AL10) (D0-/+), NO Check the line between IC1504 and IC3303, and
(AM11/AL11) (D1-/+), (AM12/AL12) (D2-/+) of IC3303 (CPU)? their peripheral circuits.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no
problem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 11
LC-60LE632U/LC-70LE732U
Is INPUT-2 selected on the input select menu screen? NO Select INPUT-2 on the input select menu screen
for the right input signal.
YES
Does the HOT PLUG detection function? Check the line between the input terminals of
NO SC1502 and IC1504.
Does the DDC5V signal come from pin (18) of SC1502 to pin (75) of IC1504 Check IC1504 and its peripheral circuits
(HDMI_SW)? (SDA1_400K: pin70 of IC1504/SCL1_400K:
pin71 of IC1504, etc.).
YES
Does the HPD signal come from pin (74) of IC1504 to pin (19) of SC1502? NO Check the line between the pin (74) of IC1504
and the pin (19) of SC1502.
Check IC1504 and its peripheral circuits
(SDA1_400K: pin70 of IC1504/SCL1_400K:
pin71 of IC1504, etc.).
YES
Are there the TMDS signal inputs at pins (17/18) (CLK-/+), (19/20) (D0-/+), (21/22) NO Is IC1504 (pin72/pin73) accessed by I2C, with
(D1-/+), (23/24) (D2-/+), all of IC1504? HDMI connected, to read the DDC_I2C SDA/SCL
data?
NO
Check the DDC line and its peripheral circuits.
(IC1504 and its peripherals).
YES
Are there the all of TMDS inputs at pins (AM9/AL9) (CLK-/+), (AM10/AL10) (D0-/+), NO Check the line between IC1504 and IC3303, and
(AM11/AL11) (D1-/+), (AM12/AL12) (D2-/+) of IC3303 (CPU)? their peripheral circuits.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no
problem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 12
LC-60LE632U/LC-70LE732U
Is INPUT-3 selected on the input select menu screen? NO Select INPUT-3 on the input select menu screen for
the right input signal.
YES
Does the HOT PLUG detection function? Check the line between the input terminals of
NO SC1501 and IC1504.
Does the DDC5V signal come from pin (18) of SC1501 to pin (56) of IC1504 Check IC1504 and its peripheral circuits.
(HDMI_SW)? (SDA1_400K: pin70 of IC1504/SCL1_400K: pin71
of IC1504, etc.).
YES
Does the HPD signal come from pin (55) of IC1504 to pin (19) of SC1501? NO Check the line between the pin (55) of IC1504 and
the pin (19) of SC1501.
Check IC1504 and its peripheral circuits
(SDA1_400K: pin70 of IC1504/SCL1_400K: pin71
of IC1504, etc.).
YES
Are there the TMDS signal inputs at pins (8/9) (CLK-/+), (10/11) (D0-/+), (12/13) NO Is IC1504 (pin53/pin54) accessed by I2C, with
(D1-/+), (14/15) (D2-/+), all of IC1504? HDMI connected, to read the DDC_I2C SDA/SCL
data?
NO
Check the DDC line and its peripheral circuits.
YES (IC1504 and its peripherals).
Are there the all of TMDS inputs at pins (AM9/AL9) (CLK-/+), (AM10/AL10) (D0-/+), NO Check the line between IC1504 and IC3303, and
(AM11/AL11) (D1-/+), (AM12/AL12) (D2-/+) of IC3303 (CPU)? their peripheral circuits.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no
problem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 13
LC-60LE632U/LC-70LE732U
Is INPUT-4 selected on the input select menu screen? NO Select INPUT-4 on the input select menu screen for
the right input signal.
YES
Does the HOT PLUG detection function? Check the line between the input terminals of SC1505
NO and IC1504.
Does the DDC5V signal come from pin (18) of SC1505 to pin (51) of IC1504 Check IC1504 and its peripheral circuits
(HDMI_SW)? (pin70 of IC1504/SCL1: pin71 of IC1504, etc.).
YES
Does the HPD signal come from pin (50) of IC1504 to pin (19) of SC1505? NO Check the line between the pin (50) of IC1504 and the
pin (19) of SC1505.
Check IC1504 and its peripheral circuits
pin70 of IC1504/SCL1: pin71 of IC1504, etc.).
YES
Are there the TMDS signal inputs at pins (99/100) (CLK-/+), (1/2) (D0-/+), (3/4) NO Is IC1504 (pin48/pin49) accessed by I2C, with HDMI
(D1-/+), (5/6) (D2-/+), all of IC1504? connected, to read the DDC_I2C SDA/SCL data?
NO
Check the DDC line and its peripheral circuits.
YES (IC1504 and its peripherals)
Are there the all of TMDS inputs at pins (AM9/AL9) (CLK-/+), (AM10/AL10) (D0-/ NO Check the line between IC1504 and IC3303, and their
+), (AM11/AL11) (D1-/+), (AM12/AL12) (D2-/+) of IC3303 (CPU)? peripheral circuits.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no
problem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 14
LC-60LE632U/LC-70LE732U
No audio (1)
Is INPUT-6 selected on the input select Is INPUT-7 selected on the input select Is INPUT-5 selected on the input select
menu screen? menu screen? menu screen?
NO NO NO
Refer to “: No external input Refer to “: No external input Refer to “: No external input
video [INPUT-6]”. video [INPUT-7]”. video [INPUT-5]”.
YES YES YES
Is the audio output selected for “VARI- Is the audio output selected for “VARI- Is the audio output selected for “VARI-
ABLE” on the menu screen? ABLE” on the menu screen? ABLE” on the menu screen?
NO NO NO
Set the audio output to Set the audio output to Set the audio output to
“FIXED”. “FIXED”. “FIXED”.
YES YES YES
Does the audio signal come from pins (8) Does the audio signal come from pins (3) Does the audio signal come from pins (13)
(L) and (7) (R) of input terminal (J510) to (L) and (2) (R) of input terminal (J510) to (L) and (12) (R) of input terminal (J510) to
pins (AL30) (L) and (AL32) (R) of IC3303 pins (AL27) (L) and (AK28) (R) of IC3303 pins (AK27) (L) and (AK29) (R) of IC3303
(CPU)? (CPU)? (CPU)?
NO NO NO
Check the line between J510 Check the line between J510 Check the line between J510
and IC3303. and IC3303. and IC3303.
YES YES YES
Does the digital audio signal come from pins (Y32/Y31/Y30/V27) (CPU_AOMCLK/AOBCK/AOLRCK/AOSDATA0) of IC3303 (CPU) to pins (5/7/8/6)
(AMP_MCLK/BCLK/LRCLK/DATA_LR) of IC2703 (AMP for L/R)?
NO
Check the line between IC3303 and IC2703 and their peripheral circuits.
YES
Is the audio output from IC2703 as specified? NO Check IC2703 and their peripheral circuits.
YES
Check the connector (P2701) L/R speakers and their
peripheral circuits.
6 – 15
LC-60LE632U/LC-70LE732U
No audio (2)
[PC analog audio input] INPUT-8 No audio. [HDMI analog audio input] INPUT-2 No audio.
Is INPUT-8 selected on the input select menu screen? Is INPUT-2 selected on the input select menu screen?
NO NO
Refer to “: No external input video [INPUT-8]”. Refer to “: No external input video [INPUT-2]”.
YES YES
Is the audio output selected for “VARIABLE” on the menu screen? Is the audio output selected for “VARIABLE” on the menu screen?
NO NO
Set the audio output to “FIXED”. Set the audio output to “FIXED”.
YES YES
Is the “PC input” - “Audio select” selected for “Video + Audio” on the Is the “PC input” - “Audio select” selected for “HDMI + Analog” on
menu screen? the menu screen?
NO NO
Set the “PC input” - “Audio select” to “Video + Set the “PC input” - “Analog select” to “HDMI +
Audio”. Analog.
YES YES
Does the digital audio signal come from pins (Y32/Y31/Y30/V27) (CPU_AOMCLK/AOBCK/AOLRCK/AOSDATA0) of IC3303 (CPU) to pins (5/7/8/6)
(AMP_MCLK/BCLK/LRCLK/DATA_LR) of IC2703 (AMP for L/R)?
NO
Check the line between IC3303 and IC2703 and their peripheral circuits.
YES
Is the audio output from IC2703 as specified? NO Check IC2703 and their peripheral circuits.
YES
Check the connector (P2701) L/R speakers and their peripheral cir-
cuits.
6 – 16
LC-60LE632U/LC-70LE732U
No audio (3)
No audio at UHF/VHF broadcast signal reception. No audio at digital broadcast signal reception.
Is TV selected on the input select menu screen? Is TV selected on the input select menu screen?
NO NO
Refer to “No video at UHF/VHF broadcast signal Refer to “No video at digital broadcast signal
reception”. reception”.
YES YES
Is the audio output selected for “VARIABLE” on the menu screen? If no video appears, refer to “No video at digital broadcast signal
reception”.
NO
Set the audio output to “FIXED”. Is the audio output selected for “VARIABLE” on the menu screen?
NO
Set the audio output to “FIXED”.
YES
Is there the SIF signal output at pin (8) of tuner (TU1105)?
NO
Check the tuner (TU1105) and its peripheral cir-
cuits.
(I2C line: TUNER_SCL/TUNER_SDA, etc.)
YES
Does the SIF signal come from pin (8) of TU1105 (tuner) to pin
(AM24) of IC3303 (CPU)?
NO
Check the line between TU1105 and IC3303, and
their peripheral circuits.
YES YES
Does the digital audio signal come from pins (Y32/Y31/Y30/V27) (CPU_AOMCLK/AOBCK/AOLRCK/AOSDATA0) of IC3303 (CPU) to pins (5/7/8/6)
(AMP_MCLK/BCLK/LRCLK/DATA_LR) of IC2703 (AMP for L/R)?
NO
Check the line between IC3303 and IC2703 and their peripheral circuits.
YES
Is the audio output from IC2703 as specified? NO Check IC2703 and their peripheral circuits.
YES
Check the connector (P2701) L/R speakers and their peripheral cir-
cuits.
6 – 17
LC-60LE632U/LC-70LE732U
No audio (4)
[INPUT-1 input]
Is INPUT-1 selected on the input select menu screen?
[INPUT-2 input]
Is INPUT-2 selected on the input select menu screen?
[INPUT-3 input]
Is INPUT-3 selected on the input select menu screen?
[INPUT-4 input]
Is INPUT-4 selected on the input select menu screen?
NO
Refer to “: No external input video [INPUT-1/2/3/4]”.
YES
[INPUT-1 input]
If no video appears, refer to “No external input video (HDMI) [INPUT-1]”.
[INPUT-2 input]
If no video appears, refer to “No external input video (HDMI) [INPUT-2]”.
[INPUT-3 input]
If no video appears, refer to “No external input video (HDMI) [INPUT-3]”.
[INPUT-4 input]
If no video appears, refer to “No external input video (HDMI) [INPUT-4]”.
NO
Set the audio output to “FIXED”.
YES
Does the digital audio signal come from pins (Y32/Y31/Y30/V27) (CPU_AOMCLK/AOBCK/AOLRCK/AOSDATA0) of IC3303 (CPU) to pins (5/7/8/6)
(AMP_MCLK/BCLK/LRCLK/DATA_LR) of IC2703 (AMP for L/R)?
NO
Check the line between IC3303 and IC2703 and their peripheral circuits.
YES
Is the audio output from IC2703 as specified? NO Check IC2703 and their peripheral circuits.
YES
Check the connector (P2701) L/R speakers and their peripheral
circuits.
6 – 18
LC-60LE632U/LC-70LE732U
If no video appears, refer to “No external input video (HDMI) If no video appears, refer to “No video at digital broadcast signal
[INPUT-1/2/3/4]”. reception”.
Is there the SPDIF signal output (CPU_ASPDIF) at pin (AA31) of IC3303 (CPU)?
NO
Check the IC3303 and its peripheral circuits.
YES
Is there the SPDIF signal (OPT_OUT) input at pin (2) of IC503 (SPDIF BUFFER & SPDIF-MUTE)?
NO
Check the line between IC3303 and IC503.
YES
Is there the MUTE signal input at pin (1) of IC503? (usual: High, Mute: Low)
NO
Check the AUDIO_MUTE and their peripheral circuits (Q505, etc.).
YES
Is there the SPDIF signal input at pin (1) of D527 (OPTICAL OUTPUT)?
YES NO
Check the speakers and the optical cable. Check D527 and its peripheral circuits.
No optical output under the following conditions as per HDMI requirements.
* Audio contents protected.
* Audio frequency beyond 48kHz.
* Audio bit length beyond 16bits.
6 – 19
LC-60LE632U/LC-70LE732U
Is the audio output from the monitor set at “VARIABLE” or “FIXED” on the menu screen?
NO
Check IC3303 (CPU) and its peripheral circuits.
YES
Are there the audio signal outputs at pins (AJ31) (HP_MON_L) and (AJ32) (HP_MON_R) of IC3303 (CPU)?
NO
Check IC3303 (CPU) and its peripheral circuits.
YES
Does the audio signal come from pins (2) (MONI_HP_L) and (11) (MONI_HP_R) of IC2704 (Line-out Amplifier) to pins (3) (L) and (2) (R) of J504?
NO
Check the line between IC2704 and J504 and their peripheral circuits.
Check the AUDIO_MUTE and HP_MUTE lines and its peripheral circuits (Q506,
YES
Q510, D2711, etc.).
Check the connector (J504) and their peripheral circuits, and speakers and the Cable.
No connect network
Does the signal come to 1pin of LAN-jack J9501? YES Check the interface device and peripheral circuits.
(see fig-1, fig-2) (power-LED of hub, LINK-LED of hub)
NO
Does the signal come to AD32 pin of IC3303? YES Check the line between J9501 and IC3303.
(see fig-2) Check the LAN-jack J9501.
NO
Check IC3303 and its peripheral circuits.
1pin
6 – 20
LC-60LE632U/LC-70LE732U
[4] Failure diagnosis by LED in front of cabinet (LC-70LE732U)
START
Yes
Is the Center Icon flashing? Check "[2] LED flashing specification at the time of an error (Center icon LED used)".
No
Yes
No
Is the Backlight lighting? Check "LED Backlight does not turn on.".
Yes
Check "Picture does not display.".
[5] LED flashing specification at the time of an error (Center icon LED used) (LC-70LE732U)
1. Display method
• Since only the center icon LED can be used, slow flashing and fast flashing are combined.
• Refer to Table 1.
• The Start from the detail display. (No outline display)
• After recovering from an error, if the same error cannot be generated again, refer to MONITOR ERR CAUSE on the process screen.
• During version upgrade, the brightness of the flashing LED changes smoothly.
• When completing version upgrade, the brightness of the LED changes in a staircase pattern.
Center icon ON
OFF
1600ms 1600ms
400ms
400ms 300ms
100ms
ON
Center icon OFF
500ms
500ms
ON
Center icon OFF
6 – 21
LC-60LE632U/LC-70LE732U
Table 1. Concrete flashing pattern
Detail display
Item Cause
Slow flashing Fast flashing
Inverter/Lamp system failure Flashes once Flashes once Lamp error
Power PWB Flashes twice Flash once Power supply error 2 (*2) AC_DET error
failure Flash twice Power supply error 2 (*2) UR+13V error
(Power failure, etc.) Flash 3 times Power supply error 2 (*2) D+3.3V error
Flash 5 times Panel power supply error
Main PWB Flashes 3 times Flashes once Initial communication error
failure Flashes twice Start-up confirmation communication error
(Communication Flashes 3 times Regular communication error
failure, etc.) Flashes 5 times Other communication error
Others Flashes 4 times Flashes once Temperature error
Flashes twice Sync error
Flashes 3 times Notification from the main microcomputer (*3)
VerUP executing Flashes smoothly None Version upgrading
VerUP succeeded Flashes in a staircase pattern None Version upgrade succeeded
VerUP failed None Flashes continuously Version upgrade failed
ROM data failure None Flashes continuously Start-up after failing version upgrade (*4)
*2: They depend on the system. Power supply error is defined from product to product.
*3: For details, refer to ERROR STANDBY CAUSE on the adjustment process screen.
*4: If the boot section is abnormal, there is no flashing (flashing impossible).
3. New method
Center icon
1600ms 1600ms
400ms
400ms 300ms
100ms
Center icon
500ms
500ms
Center icon
6 – 22
LC-60LE632U/LC-70LE732U
LED flashing timing chart at the time of an error
1) Inverter/Lamp failure details (Flashes slowly once and flashes fast) Note
2) Power failure details (Flashes slowly twice and flashes fast) Note
3) Communication failure details (Flashes slowly 3 times and flashes fast) Note
6 – 23
LC-60LE632U/LC-70LE732U
4) Other failure details (Flashes slowly 4 times and flashes fast) Note
6 – 24
LC-60LE632U/LC-70LE732U
[6] TROUBLESHOOTING TABLE (LC-70LE732U)
• LED Backlight does not turn on.
Do you start?
YES
When main unit is replaced, does it start normally?
YES NO
Replace main unit. en LCD control unit is replaced, does it start normally?
YES
Replace LCD control unit.
NO
When the parts in the panel can be replaced. →Replace all LED-bars in the panel module.
When the parts in the panel cannot be replaced. →Replace panel module.
Do you start?
NO
When power supply unit is replaced, does it start normally?
YES
Replace power supply unit.
NO
When main unit is replaced, does it start normally?
YES
Replace main unit.
NO
When LCD control unit is replaced, does it start normally?
YES
Replace LCD control unit.
NO
When the parts in the panel can be replaced. →Replace all LED-bars in the panel module.
When the parts in the panel cannot be replaced. →Replace panel module.
6 – 25
LC-60LE632U/LC-70LE732U
YES
Replace C-S FPC.
NO
When C-PWB is replaced, does screen display normally?
YES
Replace C-PWB.
(Adjust “VCOM ADJ” after replace C-PWB)
NO
Replace Panel HIRAKI.
(Adjust “VCOM ADJ” after replace Panel HIRAKI)
6 – 26
LC-60LE632U/LC-70LE732U
No video (1)
COMPOSITE: No external input video [INPUT-6] COMPOSITE: No external input video [INPUT-7]
Is INPUT-6 selected on the input select menu screen? Is INPUT-7 selected on the input select menu screen?
NO NO
Select INPUT-6 on the input select menu Select INPUT-7 on the input select menu
screen for the right input signal. screen for the right input signal.
YES YES
Is there the COMPOSITE signal input at pin (AJ23) of Is there the COMPOSITE signal input at pin (AK22) of IC3303
IC3303 (CPU)? (CPU)?
NO NO
Check the line between pin (10) of J510 Check the line between pin (5) of J510 and
and pin (AJ23) of IC3303. pin (AK22) of IC3303.
YES YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no problem in
the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 27
LC-60LE632U/LC-70LE732U
No video (2)
NO
Select INPUT-5 on the input select menu screen for the
right input signal.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no prob-
lem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 28
LC-60LE632U/LC-70LE732U
No video (3)
No video at UHF/VHF broadcast signal reception No video at digital broadcast signal reception
Is there the analog video signal output (CVBS) at pin (9) of Are there the IF signal outputs (D_IF+/-) at the pins (11) and (10) of tuner
tuner (TU1105)? (TU1105)?
NO NO
Check TU1105 and its peripheral circuits Check the line between TU1105 and IC4405, and
(TU_SDATA: Pin4 of TU1105 their peripheral circuits (C4463/C4464/R1158, etc.).
TU_SCLK: Pin5 of TU1105, etc.).
YES YES
Is there the analog video signal input at pin (AK24) of IC3303 Are there the TS signal outputs (ATSC_TS_D0/SYNC/CLK/VAL) at the
(CPU)? pins (33), (34), (37) and (38) of Demodulator (IC4405)?
NO NO
Check the line between IC3303 and TU1105, and Check the line between IC4405 and IC3303, and
their peripheral circuits. their peripheral circuits (R4450/R3365/R3432, etc.).
YES YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no
problem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 29
LC-60LE632U/LC-70LE732U
No video (4)
NO
Select INPUT-8 on the input select menu screen for the right input signal.
Is IC1504 (HDMI switch) accessed by I2C, with PC connected, to read the VGA_SCL/SDA data?
Check the DDC line and its peripheral circuits. (IC1504 and its peripherals).
YES
Are there the video signal inputs at pins (AK15) (G), (AK13) (B) and (AM15) (R) of IC3303 (CPU)?
Are there the VSYNC/HSYNC signal inputs at pins (AM13) and (AL13) of IC3303?
NO
Check the line between SC501 and IC3303.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no problem
in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 30
LC-60LE632U/LC-70LE732U
Is INPUT-1 selected on the input select menu screen? NO Select INPUT-1 on the input select menu screen
for the right input signal.
YES
Does the HOT PLUG detection function? Check the line between the input terminals of
NO SC1503 and IC1504.
Does the DDC5V signal come from pin (18) of SC1503 to pin (60) of IC1504 Check IC1504 and its peripheral circuits
(HDMI_SW)? (SDA1_400K: pin70 of IC1504/SCL1_400K: pin71
of IC1504, etc.).
YES
Does the HPD signal come from pin (59) of IC1504 to pin (19) of SC1503? NO Check the line between the pin (59) of IC1504 and
the pin (19) of SC1503.
NO
Check the DDC line and its peripheral circuits.
(IC1504 and its peripherals).
YES
Are there the all of TMDS inputs at pins (AM9/AL9) (CLK-/+), (AM10/AL10) (D0-/+), NO Check the line between IC1504 and IC3303, and
(AM11/AL11) (D1-/+), (AM12/AL12) (D2-/+) of IC3303 (CPU)? their peripheral circuits.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no
problem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 31
LC-60LE632U/LC-70LE732U
Is INPUT-2 selected on the input select menu screen? NO Select INPUT-2 on the input select menu screen
for the right input signal.
YES
Does the HOT PLUG detection function? Check the line between the input terminals of
NO SC1502 and IC1504.
Does the DDC5V signal come from pin (18) of SC1502 to pin (75) of IC1504 Check IC1504 and its peripheral circuits
(HDMI_SW)? (SDA1_400K: pin70 of IC1504/SCL1_400K:
pin71 of IC1504, etc.).
YES
Does the HPD signal come from pin (74) of IC1504 to pin (19) of SC1502? NO Check the line between the pin (74) of IC1504
and the pin (19) of SC1502.
Check IC1504 and its peripheral circuits
(SDA1_400K: pin70 of IC1504/SCL1_400K:
pin71 of IC1504, etc.).
YES
Are there the TMDS signal inputs at pins (17/18) (CLK-/+), (19/20) (D0-/+), (21/22) NO Is IC1504 (pin72/pin73) accessed by I2C, with
(D1-/+), (23/24) (D2-/+), all of IC1504? HDMI connected, to read the DDC_I2C SDA/SCL
data?
NO
Check the DDC line and its peripheral circuits.
(IC1504 and its peripherals).
YES
Are there the all of TMDS inputs at pins (AM9/AL9) (CLK-/+), (AM10/AL10) (D0-/+), NO Check the line between IC1504 and IC3303, and
(AM11/AL11) (D1-/+), (AM12/AL12) (D2-/+) of IC3303 (CPU)? their peripheral circuits.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no
problem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 32
LC-60LE632U/LC-70LE732U
Is INPUT-3 selected on the input select menu screen? NO Select INPUT-3 on the input select menu screen for
the right input signal.
YES
Does the HOT PLUG detection function? Check the line between the input terminals of
NO SC1501 and IC1504.
Does the DDC5V signal come from pin (18) of SC1501 to pin (56) of IC1504 Check IC1504 and its peripheral circuits.
(HDMI_SW)? (SDA1_400K: pin70 of IC1504/SCL1_400K: pin71
of IC1504, etc.).
YES
Does the HPD signal come from pin (55) of IC1504 to pin (19) of SC1501? NO Check the line between the pin (55) of IC1504 and
the pin (19) of SC1501.
Check IC1504 and its peripheral circuits
(SDA1_400K: pin70 of IC1504/SCL1_400K: pin71
of IC1504, etc.).
YES
Are there the TMDS signal inputs at pins (8/9) (CLK-/+), (10/11) (D0-/+), (12/13) NO Is IC1504 (pin53/pin54) accessed by I2C, with
(D1-/+), (14/15) (D2-/+), all of IC1504? HDMI connected, to read the DDC_I2C SDA/SCL
data?
NO
Check the DDC line and its peripheral circuits.
YES (IC1504 and its peripherals).
Are there the all of TMDS inputs at pins (AM9/AL9) (CLK-/+), (AM10/AL10) (D0-/+), NO Check the line between IC1504 and IC3303, and
(AM11/AL11) (D1-/+), (AM12/AL12) (D2-/+) of IC3303 (CPU)? their peripheral circuits.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no
problem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 33
LC-60LE632U/LC-70LE732U
Is INPUT-4 selected on the input select menu screen? NO Select INPUT-4 on the input select menu screen for
the right input signal.
YES
Does the HOT PLUG detection function? Check the line between the input terminals of SC1505
NO and IC1504.
Does the DDC5V signal come from pin (18) of SC1505 to pin (51) of IC1504 Check IC1504 and its peripheral circuits
(HDMI_SW)? (pin70 of IC1504/SCL1: pin71 of IC1504, etc.).
YES
Does the HPD signal come from pin (50) of IC1504 to pin (19) of SC1505? NO Check the line between the pin (50) of IC1504 and the
pin (19) of SC1505.
Check IC1504 and its peripheral circuits
pin70 of IC1504/SCL1: pin71 of IC1504, etc.).
YES
Are there the TMDS signal inputs at pins (99/100) (CLK-/+), (1/2) (D0-/+), (3/4) NO Is IC1504 (pin48/pin49) accessed by I2C, with HDMI
(D1-/+), (5/6) (D2-/+), all of IC1504? connected, to read the DDC_I2C SDA/SCL data?
NO
Check the DDC line and its peripheral circuits.
YES (IC1504 and its peripherals)
Are there the all of TMDS inputs at pins (AM9/AL9) (CLK-/+), (AM10/AL10) (D0-/ NO Check the line between IC1504 and IC3303, and their
+), (AM11/AL11) (D1-/+), (AM12/AL12) (D2-/+) of IC3303 (CPU)? peripheral circuits.
YES
Is the T-CON PWB connected? NO Check the panel module and harness.
VBO_HTPDN (40pin), VBO_LOCKN (39pin) of P2604 become Low if there is no
problem in the connection.
YES
Are the V-By-One signal input to the pin of P2604? NO Check IC3303 and its peripheral circuits.
VBO_CN_TXA+/- (36/37pin), VBO_CN_TXB+/- (32/33pin), (IC3501/IC3502/IC3503, etc.)
VBO_CN_TXC+/- (28/29pin), VBO_CN_TXD+/- (24/25pin).
YES
Check the panel module and harness.
6 – 34
LC-60LE632U/LC-70LE732U
No audio (1)
Is INPUT-6 selected on the input select Is INPUT-7 selected on the input select Is INPUT-5 selected on the input select
menu screen? menu screen? menu screen?
NO NO NO
Refer to “: No external input Refer to “: No external input Refer to “: No external input
video [INPUT-6]”. video [INPUT-7]”. video [INPUT-5]”.
YES YES YES
Is the audio output selected for “VARI- Is the audio output selected for “VARI- Is the audio output selected for “VARI-
ABLE” on the menu screen? ABLE” on the menu screen? ABLE” on the menu screen?
NO NO NO
Set the audio output to Set the audio output to Set the audio output to
“FIXED”. “FIXED”. “FIXED”.
YES YES YES
Does the audio signal come from pins (8) Does the audio signal come from pins (3) Does the audio signal come from pins (13)
(L) and (7) (R) of input terminal (J510) to (L) and (2) (R) of input terminal (J510) to (L) and (12) (R) of input terminal (J510) to
pins (AL30) (L) and (AL32) (R) of IC3303 pins (AL27) (L) and (AK28) (R) of IC3303 pins (AK27) (L) and (AK29) (R) of IC3303
(CPU)? (CPU)? (CPU)?
NO NO NO
Check the line between J510 Check the line between J510 Check the line between J510
and IC3303. and IC3303. and IC3303.
YES YES YES
Does the digital audio signal come from pins (Y32/Y31/Y30/V27) (CPU_AOMCLK/AOBCK/AOLRCK/AOSDATA0) of IC3303 (CPU) to pins (5/7/8/6)
(AMP_MCLK/BCLK/LRCLK/DATA_LR) of IC2703 (AMP for L/R)?
NO
Check the line between IC3303 and IC2703 and their peripheral circuits.
YES
Is the audio output from IC2703 as specified? NO Check IC2703 and their peripheral circuits.
YES
Check the connector (P2701) L/R speakers and their
peripheral circuits.
6 – 35
LC-60LE632U/LC-70LE732U
No audio (2)
[PC analog audio input] INPUT-8 No audio. [HDMI analog audio input] INPUT-2 No audio.
Is INPUT-8 selected on the input select menu screen? Is INPUT-2 selected on the input select menu screen?
NO NO
Refer to “: No external input video [INPUT-8]”. Refer to “: No external input video [INPUT-2]”.
YES YES
Is the audio output selected for “VARIABLE” on the menu screen? Is the audio output selected for “VARIABLE” on the menu screen?
NO NO
Set the audio output to “FIXED”. Set the audio output to “FIXED”.
YES YES
Is the “PC input” - “Audio select” selected for “Video + Audio” on the Is the “PC input” - “Audio select” selected for “HDMI + Analog” on
menu screen? the menu screen?
NO NO
Set the “PC input” - “Audio select” to “Video + Set the “PC input” - “Analog select” to “HDMI +
Audio”. Analog.
YES YES
Does the digital audio signal come from pins (Y32/Y31/Y30/V27) (CPU_AOMCLK/AOBCK/AOLRCK/AOSDATA0) of IC3303 (CPU) to pins (5/7/8/6)
(AMP_MCLK/BCLK/LRCLK/DATA_LR) of IC2703 (AMP for L/R)?
NO
Check the line between IC3303 and IC2703 and their peripheral circuits.
YES
Is the audio output from IC2703 as specified? NO Check IC2703 and their peripheral circuits.
YES
Check the connector (P2701) L/R speakers and their peripheral cir-
cuits.
6 – 36
LC-60LE632U/LC-70LE732U
No audio (3)
No audio at UHF/VHF broadcast signal reception. No audio at digital broadcast signal reception.
Is TV selected on the input select menu screen? Is TV selected on the input select menu screen?
NO NO
Refer to “No video at UHF/VHF broadcast signal Refer to “No video at digital broadcast signal
reception”. reception”.
YES YES
Is the audio output selected for “VARIABLE” on the menu screen? If no video appears, refer to “No video at digital broadcast signal
reception”.
NO
Set the audio output to “FIXED”. Is the audio output selected for “VARIABLE” on the menu screen?
NO
Set the audio output to “FIXED”.
YES
Is there the SIF signal output at pin (8) of tuner (TU1105)?
NO
Check the tuner (TU1105) and its peripheral cir-
cuits.
(I2C line: TUNER_SCL/TUNER_SDA, etc.)
YES
Does the SIF signal come from pin (8) of TU1105 (tuner) to pin
(AM24) of IC3303 (CPU)?
NO
Check the line between TU1105 and IC3303, and
their peripheral circuits.
YES YES
Does the digital audio signal come from pins (Y32/Y31/Y30/V27) (CPU_AOMCLK/AOBCK/AOLRCK/AOSDATA0) of IC3303 (CPU) to pins (5/7/8/6)
(AMP_MCLK/BCLK/LRCLK/DATA_LR) of IC2703 (AMP for L/R)?
NO
Check the line between IC3303 and IC2703 and their peripheral circuits.
YES
Is the audio output from IC2703 as specified? NO Check IC2703 and their peripheral circuits.
YES
Check the connector (P2701) L/R speakers and their peripheral cir-
cuits.
6 – 37
LC-60LE632U/LC-70LE732U
No audio (4)
[INPUT-1 input]
Is INPUT-1 selected on the input select menu screen?
[INPUT-2 input]
Is INPUT-2 selected on the input select menu screen?
[INPUT-3 input]
Is INPUT-3 selected on the input select menu screen?
[INPUT-4 input]
Is INPUT-4 selected on the input select menu screen?
NO
Refer to “: No external input video [INPUT-1/2/3/4]”.
YES
[INPUT-1 input]
If no video appears, refer to “No external input video (HDMI) [INPUT-1]”.
[INPUT-2 input]
If no video appears, refer to “No external input video (HDMI) [INPUT-2]”.
[INPUT-3 input]
If no video appears, refer to “No external input video (HDMI) [INPUT-3]”.
[INPUT-4 input]
If no video appears, refer to “No external input video (HDMI) [INPUT-4]”.
NO
Set the audio output to “FIXED”.
YES
Does the digital audio signal come from pins (Y32/Y31/Y30/V27) (CPU_AOMCLK/AOBCK/AOLRCK/AOSDATA0) of IC3303 (CPU) to pins (5/7/8/6)
(AMP_MCLK/BCLK/LRCLK/DATA_LR) of IC2703 (AMP for L/R)?
NO
Check the line between IC3303 and IC2703 and their peripheral circuits.
YES
Is the audio output from IC2703 as specified? NO Check IC2703 and their peripheral circuits.
YES
Check the connector (P2701) L/R speakers and their peripheral
circuits.
6 – 38
LC-60LE632U/LC-70LE732U
If no video appears, refer to “No external input video (HDMI) If no video appears, refer to “No video at digital broadcast signal
[INPUT-1/2/3/4]”. reception”.
Is there the SPDIF signal output (CPU_ASPDIF) at pin (AA31) of IC3303 (CPU)?
NO
Check the IC3303 and its peripheral circuits.
YES
Is there the SPDIF signal (OPT_OUT) input at pin (2) of IC503 (SPDIF BUFFER & SPDIF-MUTE)?
NO
Check the line between IC3303 and IC503.
YES
Is there the MUTE signal input at pin (1) of IC503? (usual: High, Mute: Low)
NO
Check the AUDIO_MUTE and their peripheral circuits (Q505, etc.).
YES
Is there the SPDIF signal input at pin (1) of D527 (OPTICAL OUTPUT)?
YES NO
Check the speakers and the optical cable. Check D527 and its peripheral circuits.
No optical output under the following conditions as per HDMI requirements.
* Audio contents protected.
* Audio frequency beyond 48kHz.
* Audio bit length beyond 16bits.
6 – 39
LC-60LE632U/LC-70LE732U
Is the audio output from the monitor set at “VARIABLE” or “FIXED” on the menu screen?
NO
Check IC3303 (CPU) and its peripheral circuits.
YES
Are there the audio signal outputs at pins (AJ31) (HP_MON_L) and (AJ32) (HP_MON_R) of IC3303 (CPU)?
NO
Check IC3303 (CPU) and its peripheral circuits.
YES
Does the audio signal come from pins (2) (MONI_HP_L) and (11) (MONI_HP_R) of IC2704 (Line-out Amplifier) to pins (3) (L) and (2) (R) of J504?
NO
Check the line between IC2704 and J504 and their peripheral circuits.
Check the AUDIO_MUTE and HP_MUTE lines and its peripheral circuits (Q506,
YES
Q510, D2711, etc.).
Check the connector (J504) and their peripheral circuits, and speakers and the Cable.
No connect network
Does the signal come to 1pin of LAN-jack J9501? YES Check the interface device and peripheral circuits.
(see fig-1, fig-2) (power-LED of hub, LINK-LED of hub)
NO
Does the signal come to AD32 pin of IC3303? YES Check the line between J9501 and IC3303.
(see fig-2) Check the LAN-jack J9501.
NO
Check IC3303 and its peripheral circuits.
1pin
6 – 40
LC-60LE632U/LC-70LE732U
CHAPTER 7. MAJOR IC INFORMATIONS Service
LC-60LE632U
Manual
7–1
LC-60LE632U/LC-70LE732U
1.11. IC9505 (VHiPD720114-1Q)
This IC is a USB hub controller.
It has one upstream port and four downstream ports,
7–2
LC-60LE632U/LC-70LE732U
[2] MAJOR IC INFORMATIONS (LC-70LE732U)
1. MAJOR IC INFORMATIONS
1.1. IC1504 (VHiSii9387+-1Q)
This IC is 5 input and 1 output HDMI port processor.
The TMDS cores run at 2.25Gbps. (Supports video resolutions up to 1080p, 60Hz, 12bit.)
The adaptive equalizer provides long cable support.
This IC has been pre-programmed with HDCP keys.
EDID and DDC support for 5 HDMI/DVI ports and 1 VGA port. (This IC includes 512-byte NVRAM and 256-byte SRAM for 5 HDMI ports and 128-byte
SRAM for VGA port.)
This IC supports the mandatory and several optional 3D formats described in the HDMI 1.4 Specification.
“Audio Return Channel” and “HDMI Ethernet Channel” support for one receiver port.
When changing this IC, please write EDID (how to write EDID is shown in Chapter 5 and section 10.1).
7–3
LC-60LE632U/LC-70LE732U
1.11. IC9505 (VHiPD720114-1Q)
This IC is a USB hub controller.
It has one upstream port and four downstream ports,
7–4
LC-60LE632U/LC-70LE732U
CHAPTER 8. OVERALL WIRING/SYSTEM BLOCK DIAGRAM
LC-60LE632U
Service Manual
[PD] 24
POWER/DRIVE Unit
RUNTKA847WJQZ 1
H
1 24
[PD]
[SP]
1
5
G
USB
HDMI
[LV]
[AC] 1
12
F 41
MAIN Unit
HDMI
DKEYMF733FM17
HDMI
[PL]
1
E 4
HDMI
1
KEY UNIT
DUNTKF800FM50 15 [RC]
1
1 4 [CI]
3
D [PL]
1 1
[LW] [UB]
6
LCD CONTROL Unit 41
DUNTKF778FM02 TUNER
ETHER
USB NET
[KM]
1
C
4 1 80 1 80
A
Rch : RSP-ZA539WJQZ Lch : RSP-ZA538WJQZ
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
8–1
LC-60LE632U/LC-70LE732U
[2] OVERALL WIRING DIAGRAM (LC-70LE732U)
[PD] 24
POWER Unit
RUNTKA857WJQZ 1
H
1 24
[PD]
[SP]
1
5
G
USB
HDMI
[LV]
[AC] 1
12
F
41
MAIN Unit
HDMI
DKEYMF733FM19
HDMI
[PL]
1
E
4
HDMI
1
KEY UNIT
DUNTKF800FM51 15 [RC]
1
1 4 [CI]
3
D
[PL]
1 1
[LW] [UB]
6
LCD CONTROL Unit 41
DUNTKF778FM04 TUNER
ETHER
USB NET
[KM]
C 1
4 1 80 1 80
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
8–2
LC-60LE632U/LC-70LE732U
[3] SYSTEM BLOCK DIAGRAM (LC-60LE632U)
CVBS CVBS2_IN
INPUT MAIN
7 CVBS2_IN_L/R
J LR T-CON
VBO_LOCKN
BU+3.3V
DET_PNL12V
RESET I/O 9
H
AMP_MUTE
PWM2
MODE THERMO 2
IXD241WJ A/D Thermister
GSP_PWM1
AUDIO_MUTE 5
SUB MCU
20MHz
EEPROM_SCL/SDA BU+3.3V
BU+3.3V FL2001
CVBS_Out
V-By-One
I2C IC2004
Xtal
CVBS
Component
WP EEPROM
+3.3V I/O
P2605(4p)
IC4405 +3.3V PMREQ 2kbit
25MHz +1.5V I/O
X4402 ATSC Demod+1.2V DEMOD_TSCLK/SYNC/VAL/DATA0 +1.2V AUDIO_MUTE (=N_MUTE_A_ALL) LAMP_ERR
Xtal MT5112EE +1.1V I/O I/O
D_IF-/+ CPU_TXD1_UCOM,CPU_RXD1_UCOM STB
UART I/O
G ATSC_IF_AG N_SRESET AC_DET
I/O I/O
[PL] PNL12V
HDMI_CEC_IN
CVBS
I/O SMPOW
HDMI_CEC_OUT
A/D
I/O I/O
DEMOD_RST SMPOWHOLD PS_O
OR
PNL12V
TU_SCL/SDA N
RC,OPC
POWSW,KEY1,KE
IR_PASS
0
IC8452-3
RC_CPU GND
Select
N_TUN_RST N_TUN_RST RC
SIF
1
7
TU_DEMOD_SCL/SDA (400KHz 3.3V)
IC3303 1
POWER Unit
F I2C_0 (400KHz 3.3V) TUNER_I2C RC
RF IN I2C_1 (100KHz 3.3V) I2C_0
TU1105 +3.3V I2C_1 MT5395(FHD) VON
4
AUDIO_MUTE
STB_CPU
N_PER_RST
Analog/ +1.8V
I2C_2 H.264 / VC-1 I/O +3.3V
2
Digital PC_VSYNC/HSYNC OFL1
Si Tuner RGB HV(AK14,AJ14) PWM_0 IC9610
PC_R/G/B Digital AV decode & Main CPU 3
RGB in(AK17) OFL2 Spliter
PWM_1 5
DDC_I2C_1 HC2G66DP
PNL_POW
AC_DET
PS_ON
CVBS2_IN_L/R +1.5V IC3501
OPTICAL
IC503 +5V DDR3(1333M)
OUT AUDIO_MUTE CVBS1_IN_L/R IC3502
1Gbit 11
OPT_OUT DDR3(1333M)
COMP_IN_L/R 1Gbit MAIN 12
Audio in
RGB/HDMI D5.6V 10
INPUT PC/HDMI_LR PC/HDMI_LR +1.5V
Audio D5V UR13V
2/8
/NAND Flash
UART-RXD1
UART-RXD0
UART-TXD1
UART-TXD0
(Mini Plug) U5V
SPI_FLASH
IC3503
ONDD8~
ONDA6~
OPT_OUT
ILL_LED1_STBY_USE,ILL_LED3
DTV/SPDIF DDR3(1333M) D3.3V S13V
UART-2
15
1Gbit M1.8V
USB_1
USB_0
PC_VSYNC/HSYNC RESET zz BU5V
D1.5V
INPUT D-SUB PC_R/G/B RESET D1.1V
D 8 RGB BackUp
BU+3.3V
BU+3.3V BU+3.3V
IC8452-1
IC8452-2
UART_CPUTO232C,UART_232CTOCPU 1 +3.3V IC8451 1
Select
Select
Buffer POWER CIRCUIT
+3.3V 0 0 LED_Drive
IC506
ILL_LED1STBYUS
RS-232C RS232C TxRx
M3221EIP
+5V SMPOWHOLD
DDC_0 +3.3V
+3.3V IC8401
HDMI_0
+1.2V NAND FLASH BU+5V
C 2Gbit
INPUT DDC_1 Tr
HDMI 4 HDMI_1 I2C_1 (100KHz)
4
IC1504
INPUT DDC_2 HDMI-SW
HDMI 3
HDMICECOU
3 HDMI_2 SII9387
POWSW,KEY1,KE
HDMICECI
RC,OPC
INPUT HDMI 2 DDC_3
2 HDMI_3 BU+3.3V
+5V
IC2003 +3.3V
INPUT HDMI 1 DDC_4 Buffer BU+3.3V
(ARC) HDMI_4 LCX125FT
B 1
HDMI_CEC HDMI_CEC
[RC] P2001(15p) [CI] P2007(3p)
J9502
[KM] P151(4p) [RA] P103(5p) [CI] P202(3p)
USB +5V
IC9502 U5V
0.5A PowerSW
AP2151
3 +3.3V
TACT KEY R/C EMBLEM
IC9505
USB2.0 Hub N_PER_RST WiFi
Controller R/C
PD720114 WOWLAN OPC
J9504 4 X950230MHz
[US] WiFi
P9501(6p)
+5V 2
A USB IC9503 Xtal
(6p)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
8–3
LC-60LE632U/LC-70LE732U
[4] SYSTEM BLOCK DIAGRAM (LC-70LE732U)
CVBS CVBS2_IN
INPUT MAIN
7 CVBS2_IN_L/R
J LR T-CON
VBO_LOCKN
BU+3.3V
DET_PNL12V
RESET I/O 9
H
AMP_MUTE
PWM2
MODE THERMO 2
IXD241WJ A/D Thermister
GSP_PWM1
AUDIO_MUTE 5
SUB MCU
20MHz
EEPROM_SCL/SDA BU+3.3V
BU+3.3V FL2001
CVBS_Out
V-By-One
I2C IC2004
Xtal
CVBS
Component
WP EEPROM
+3.3V I/O
P2605(4p)
IC4405 +3.3V PMREQ 2kbit
25MHz +1.5V I/O
X4402 ATSC Demod+1.2V DEMOD_TSCLK/SYNC/VAL/DATA0 +1.2V AUDIO_MUTE (=N_MUTE_A_ALL) LAMP_ERR
Xtal MT5112EE +1.1V I/O I/O
D_IF-/+ CPU_TXD1_UCOM,CPU_RXD1_UCOM STB
UART I/O
G ATSC_IF_AG N_SRESET AC_DET
I/O I/O
[PL] PNL12V
HDMI_CEC_IN
CVBS
I/O SMPOW
HDMI_CEC_OUT
A/D
I/O I/O
DEMOD_RST SMPOWHOLD PS_O
OR
PNL12V
TU_SCL/SDA N
RC,OPC
POWSW,KEY1,KE
IR_PASS
0
IC8452-3
RC_CPU GND
Select
N_TUN_RST N_TUN_RST RC
SIF
1
7
TU_DEMOD_SCL/SDA (400KHz 3.3V)
IC3303 1
POWER Unit
F I2C_0 (400KHz 3.3V) TUNER_I2C RC
RF IN I2C_1 (100KHz 3.3V) I2C_0
TU1105 +3.3V I2C_1 MT5395(FHD) VON
4
AUDIO_MUTE
STB_CPU
N_PER_RST
Analog/ +1.8V
I2C_2 H.264 / VC-1 I/O +3.3V
2
Digital PC_VSYNC/HSYNC OFL1
Si Tuner RGB HV(AK14,AJ14) PWM_0 IC9610
PC_R/G/B Digital AV decode & Main CPU 3
RGB in(AK17) OFL2 Spliter
PWM_1 5
DDC_I2C_1 HC2G66DP
PNL_POW
AC_DET
PS_ON
CVBS2_IN_L/R +1.5V IC3501
OPTICAL
IC503 +5V DDR3(1333M)
OUT AUDIO_MUTE CVBS1_IN_L/R IC3502
1Gbit 11
OPT_OUT DDR3(1333M)
COMP_IN_L/R 1Gbit MAIN 12
Audio in
RGB/HDMI D5.6V 10
INPUT PC/HDMI_LR PC/HDMI_LR +1.5V
Audio D5V UR13V
2/8
/NAND Flash
UART-RXD1
UART-RXD0
UART-TXD1
UART-TXD0
(Mini Plug) U5V
SPI_FLASH
IC3503
ONDD8~
ONDA6~
OPT_OUT
ILL_LED1_STBY_USE,ILL_LED3
DTV/SPDIF DDR3(1333M) D3.3V S13V
UART-2
15
1Gbit M1.8V
USB_1
USB_0
PC_VSYNC/HSYNC RESET zz BU5V
D1.5V
INPUT D-SUB PC_R/G/B RESET D1.1V
D 8 RGB BackUp
BU+3.3V
BU+3.3V BU+3.3V
IC8452-1
IC8452-2
UART_CPUTO232C,UART_232CTOCPU 1 +3.3V IC8451 1
Select
Select
Buffer POWER CIRCUIT
+3.3V 0 0 LED_Drive
IC506
ILL_LED1STBYUS
RS-232C RS232C TxRx
M3221EIP
+5V SMPOWHOLD
DDC_0 +3.3V
+3.3V IC8401
HDMI_0
+1.2V NAND FLASH BU+5V
C 2Gbit
INPUT DDC_1 Tr
HDMI 4 HDMI_1 I2C_1 (100KHz)
4
IC1504
INPUT DDC_2 HDMI-SW
HDMI 3
HDMICECOU
3 HDMI_2 SII9387
POWSW,KEY1,KE
HDMICECI
RC,OPC
INPUT HDMI 2 DDC_3
2 HDMI_3 BU+3.3V
+5V
IC2003 +3.3V
INPUT HDMI 1 DDC_4 Buffer BU+3.3V
(ARC) HDMI_4 LCX125FT
B 1
HDMI_CEC HDMI_CEC
[RC] P2001(15p) [CI] P2007(3p)
J9502
[KM] P151(4p) [RA] P103(5p) [CI] P202(3p)
USB +5V
IC9502 U5V
0.5A PowerSW
AP2151
3 +3.3V
TACT KEY R/C EMBLEM
IC9505
USB2.0 Hub N_PER_RST WiFi
Controller R/C
PD720114 WOWLAN OPC
J9504 4 X950230MHz
[US] WiFi
P9501(6p)
+5V 2
A USB IC9503 Xtal
(6p)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
8–4
PartsGuide
LC-60LE632U/LC-70LE732U
PARTS GUIDE
No. S31O870LE732U
LC-60LE632U
MODELS LC-70LE732U
CONTENTS
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these
parts with specified ones for maintaining the safety and performance of the set.
2
LC-60LE632U/LC-70LE732U
[4] CABINET PARTS (LC-60LE632U)
g
WiFi Unit 43 29
e
1-1 1-4
h
R/C OPC Unit
D ICON Unit
C 1-5
1-2 f
E 40
1-3 37
1-6 D
24 B
42 42
42
42 C
20 E 41
H
42
20
27
32 3
27 5 28
13
42 16
7
A 42
H 6 32 d
3 12
F 11
34 7
G c a 33 34 27
7
MAIN Unit 9
12
k LCD CONTROL F f
19 17
Unit
18
12 c
4
d 15
d a
39 j
60" LCD
Panel Module Unit h
38
e 36
g
42
31
45
25
A 44
22
2
42
21
POWER/DRIVE Unit 7 30
k
10 d B 44
8
G
35 KEY Unit
8 46
10 8
23
14 j
26
43
3
LC-60LE632U/LC-70LE732U
4
LC-60LE632U/LC-70LE732U
[5] CABINET PARTS (LC-70LE732U)
1
g
WiFi Unit 42 9
1-8 e
h 24
1-4 3
1-1 R/C OPC Unit
24
1-5 ICON Unit 3-2 3
F 3-1
3-1
1-6
C 3-2
3-2
1-2 D
G 3-2
24 3-1 24
5 3-1
1-3 24 3
30 3
1-7 E
4 B
30-2 30-1 f 5
39 C
30 30-1
35
4
9 10
30-2 F
7 7 32
9 G
7 40
A
10 7 9 30-1
H a 47 24 30
D J c
m 30-2
E 15-1
15-2
23 15
11
LCD CONTROL Unit
k 22 23
22
d
d
5
LC-60LE632U/LC-70LE732U
6
LC-60LE632U/LC-70LE732U
[6] SUPPLIED ACCESSORIES/PACKING PARTS (LC-60LE632U)
X1 X2 X3
X4 Stand support Ass'y (x2) Stand Base Ass'y (x1) Stand Screw Ass'y (x1)
Remote control unit (x1)
X5 Enquete card
X6 Guarantee card
X9
“AAA” size battery (x2) X7 X8
Operation manual (x1) Connection guide (x1)
S5
X1
X4
S9
X3
X9 S8
X5
X6
S6 X7
X8
S6
S4
X2
S6
S7 S7
S1
S7
S2
S3
FRONT
S10
S10
7
LC-60LE632U/LC-70LE732U
8
LC-60LE632U/LC-70LE732U
[7] SUPPLIED ACCESSORIES/PACKING PARTS (LC-70LE732U)
X1 X2 X3
X5 Stand support Ass'y (x2) Stand Base Ass'y (x1) Stand Screw Ass'y (x1)
Remote control unit (x1)
X6 Enquete card
X7 Guarantee card
X10
“AAA” size battery (x2) X8 X9
Operation manual (x1) Connection guide (x1)
S12 S5
X3 X1
S11 S7
X10
S10
S6 X6
X7
X5 X8
X9
S7
S7
S9
S3
S8
S4 S8
X2
S1
S8 S8
S8
S2
S13
S13
9
LC-60LE632U/LC-70LE732U
10
LC-60LE632U/LC-70LE732U
LC-60LE632U/LC-70LE732U
SHARP CORPORATION
AV Systems Group
Mar. 2011 CS Promotion Center
SH. DS Yaita,Tochigi 329-2193, Japan
TopPage
LC-60LE632U/LC-70LE732U
SERVICE MANUAL
No. S31O970LE732U
CONTENTS
OUTLINE Parts Guide
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
NOTE: When replacing the LCD control PWB, perform the VCOM adjustment.
i
LC-60LE632U/LC-70LE732U
CHAPTER 1. Removing LCD Module
LC-60LE632U
Service Manual
2. Detach the 60” LCD Panel Unit , P-Chassis Unit (Top) , P-Chassis Unit (Bottom) , P-Chassis Unit (Left) , P-Chassis Unit (Right) .
3. Detach the DiffUsion Sheet , Lens Sheet , Microlens Sheet , Light Guide Plate , Reflection Sheet , 6 Graphite sheets .
4. Remove the 18 lock screws , and detach the 2 Installation Angle Units .
5. Remove the 8 lock screws , and detach the 4 LED PWBs .
6. Remove the 6 lock screws , and detach the 2 Holder Units .
7. Detach the Fit Cover (Cap) , and disconnect the LED PWB Connection Harness .
8. Detach the BL Chassis .
Diffusion Sheet 13
P-Chassis
9
Unit (Top)
P-Chassis
60" LCD Panel Unit 8 Unit (Left) 11
1
Bezel Unit
4 (Top) 17 Reflection Sheet
15 Microlens Sheet
2 12 P-Chassis
Unit (Right)
Bezel Unit 6
10 P-Chassis 25 Fit Cover (Cap)
(Left)
Unit (Bottom)
1
27 BL Chassis
1
7 Bezel Unit (Right)
Bezel Unit
(Bottom) 5 3
1 19
26
18 Graphite sheet 23
LED PWB 22 20 Installation Angle Unit
18 Graphite sheet
24 Holder Unit 21
21 22 LED PWB
LED PWB 22
23
18 Graphite sheet 19
Graphite
18
sheet 24 Holder Unit
Installation Angle 20
Unit
22 LED PWB
1–1
LC-60LE632U/LC-70LE732U
[2] Removing LCD Module (LC-70LE732U)
1. Remove the 28 lock screws , 24 lock screws and detach the Bezel Unit (Top) , Bezel Unit (Bottom) , Bezel Unit (Left) , Bezel Unit
(Right) .
2. Disconnect the 2 SG-FPCs (L/R) .
3. Detach the 70” LCD Panel Unit , P-Chassis Unit (T/L) , P-Chassis Unit (T/R) , P-Chassis Unit (B/L) , P-Chassis Unit (B/L) , P-Chassis
Unit (L) , P-Chassis Unit (R) .
4. Detach the Microlens Sheet , Lens Sheet , Microlens Sheet , Diffusion Plate .
5. Remove the 24 Support Pins , 116 Push Rivet , and detach the Reflection Sheet (L) , Reflection Sheet (R) .
6. Detach the 2 Bush Caps , and disconnect the Connection Harness .
7. Remove the 56 Push Rivets , and detach the 7 LED PWBs , 7 LED PWBs , 7 LED PWBs , 7 LED PWBs .
8. Detach the BL Chassis Unit .
Microlens Sheet 17
Microlens Sheet 15
1
7 SG-FPC (R)
6 23 Bush Cap
L1
Bezel Unit (Bottom) 4 Bezel Unit
26 LED PWB
(Right)
27 LED PWB
28 LED PWB
29 LED PWB
L2
Reflection Sheet (L) 21 30 BL Chassis Unit
Push Rivet 20
24 Connection Harness
25 Push Rivet
19 Support Pin
1–2
LC-60LE632U/LC-70LE732U
9. Handling notes
i) Set and connect LED-PWBs.
RUNTK4867/4868TPZZ RUNTK4869/4870TPZZ
RUNTK4867TPZZ RUNTK4869TPZZ
RUNTK4868TPZZ RUNTK4870TPZZ
RUNTK4867TPZZ RUNTK4869TPZZ
RUNTK4868TPZZ RUNTK4870TPZZ
RUNTK4867TPZZ RUNTK4869TPZZ
㧨CAUTION㧪 RUNTK4868TPZZ RUNTK4870TPZZ 㧨CAUTION㧪
It being altemated RUNTK4867TPZZ RUNTK4869TPZZ It being altemated
RUNTK4867TPZZ RUNTK4868TPZZ RUNTK4870TPZZ RUNTK4869TPZZ
RUNTK4867TPZZ RUNTK4869TPZZ and RUNTK4870TPZZ
and RUNTK4868TPZZ
RUNTK4868TPZZ RUNTK4870TPZZ
RUNTK4867TPZZ RUNTK4869TPZZ
RUNTK4868TPZZ RUNTK4870TPZZ
RUNTK4867TPZZ RUNTK4869TPZZ
RUNTK4868TPZZ RUNTK4870TPZZ
RUNTK486*TPZZ RUNTK48**TPZZ
Boss of
BL-CHASSIS
LED-PWB
Boss fitting
(showing in blue circles)
ii) Peel off the lamination film of LENS SHEET on the both sides.
Peel off the lamination film of LENS SHEET on the both sides.
FRONT BACK
1–3
LC-60LE632U/LC-70LE732U
—MEMO—
1–4
PartsGuide
LC-60LE632U/LC-70LE732U
PARTS GUIDE
No. S31O970LE732U
LC-60LE632U
MODELS LC-70LE732U
CONTENTS
[1] LCD PANEL MODULE Unit [2] LCD PANEL MODULE Unit
(LC-60LE632U) (LC-70LE732U)
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these
parts with specified ones for maintaining the safety and performance of the set.
1
14
16
17
18
27
13
21
15
26
20
23 19
27
27 22
25 24
2
11
27
4 28
7
9
3
8
8
29
12
12
6
12 10
12 6
5
9
5
8
11
7
8
2
LC-60LE632U/LC-70LE732U
3
LC-60LE632U/LC-70LE732U
[2] LCD PANEL MODULE Unit (LC-70LE732U)
18
18
20
1
24
21
29
33 28
25
23
31 4 11
2
34 11
27 4
35
L1
32
5 3
30 6
7
8
L2
12
10
9
14
9
9
13 9 Insert PUSH RIVET (56 Locations)
16
9 9 9 9
9 9 9 9
9 9 9 9
15 9 9 9 9
9 9 9 9
9 9 9 9
9 9 9 9
14 Insert PUSH RIVET (116 Locations) and 15 Insert PUSH RIVET (24 Locations) 9 9 9 9
9 9 9 9
Insert SUPPORT PIN.
14 14 14 14 14 14 14 14 14 14 9 9 9 9
14 14 14 14 14 14 14 15 15 14
24 locations 9 9 9 9
15 9 9 9 9
14 15 14 15 14 15 14 14 14 14
14 14 14 14 14 14 14 14 14 14 9 9 9 9
14 14 15 14 14 14 15 14 15 14 9 9 9 9
14 14 14 14 14 15 14 14 14 14
14 15 14 15 14 14 14 15 14 14
14 14 15 14 14 14 15 14 15 14 PUSH RIVET Fasten LED-PWBs with PUSH RIVETs x 56
14 14 14 14 15 14 14 14 14 14 SUPPORT PIN
14 15 14 15 14 14 14 15 14 14
14 14 14 14 14 14 14 14 14 14 9
15 15 15
Insert PUSH RIVET.
14 14 14 14 14 14 14
14 15 15 14 14 14 14 14 14 14 116 locations
14 14 14 14 14 14 14 14 14 14 14 Insert PUSH RIVET. In the insertion place (56places),
there is a circle marking
by silk-screen printing on LED-PWB.
LED-PWB
PUSH RIVET
4
LC-60LE632U/LC-70LE732U
5
LC-60LE632U/LC-70LE732U
SHARP CORPORATION
AV Systems Group
Apr. 2011 CS Promotion Center
SH. DS Yaita,Tochigi 329-2193, Japan
TopPage
LC-60LE632U/LC-70LE732U
SERVICE MANUAL
No. S31P170LE732U
CONTENTS
OUTLINE CHAPTER 2. SCHEMATIC DIAGRAM
[1] DESCRIPTION OF SCHEMATIC
CHAPTER 1. PRINTED WIRING BOARD DIAGRAM......................................................2-1
ASSEMBLIES [2] SCHEMATIC DIAGRAM ................................2-2
[1] MAIN Unit....................................................... 1-1
[2] R/C OPC Unit................................................. 1-5 Parts Guide
[3] ICON Unit (LC-70LE732U only) ..................... 1-6
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
NOTE: *1 Replace MAIN PWB Unit (DKEYMF733FM**) in case of IC8401, IC3303 or IC8455 failure.
i
LC-60LE632U/LC-70LE732U
CHAPTER 1. PRINTED WIRING BOARD ASSEMBLIES
LC-60LE632U
Service Manual
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
1–1
1–2
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
D2012
D2010
FB2019
FB2022
A
R2068
P9501 P2007 P2006 P2001 P2004
P2601 P2604
FB2006
R2021 P2605 P2703 P2701
C2794
D2011
R2073
Q2009
FB2009
R2001
R2024
L9502 Q2008
FB2010
FB2007
FB2004
C2024
C2025
FB2018
FB2017
FB2021
FB2020
FB2015
C2003
R2015
R2014
R2016
R2010
R2072
R2023
R2048
R2003
R2006
L2601 L2602 L2603 FB2617
R2012 C2001 C2002
FB2611
FB2621
FB2622
R2728
R569
R2726
L2607
L2608
L2609
L2610
Q502
C603 R2601
R532
C600
VA507
R2654
R2763
R2765
FB2704
FB2705
C2748
C2738
C2718
C2719
C2735
C2747
FB2612 R2604
FB2613 R2603
FL509
FB539
R571
R2607
C542
C543
IC2702
R518
D518
J9503
R2608
VA9504VA9503
R657
C2728
C2726
R2030
R656
P2003
D522
L9504
FB548
R2769
L2704
L2702
L2701
L2703
R2034
R2033
R2032
R2738
X2001
R2735
R2025 R2026
C614
R2745
R670
B
C2010
C612
IC510 R2036
Q509
R2730
R2729
R2732
R2037 C2716
C2011
R2039
R2040
L502
R641
C609 C610 R535 C517 R624 D523 D521 R2045
C538
R567
C9519
D505
D503
FL508
R530
C533
D504
C503
FB538
IC2001 IC2703
R568
C539
VA506
IC507
FL2001
R2046
FB508
R564
C532
C599
C511
R504
FB501
R565 FB517 FB518 FB523 R2043
C591
C2012 C2014 R2044
R508
R613
R516
C586
C562 C584 C580 R2042
R2716
R2717
R2718
R2719
R2720
C583 R665
R664
C2731
C2729
VA501 VA502
FB525
IC9504
C585
R2049 R2740
C9511
D524 R2013 R2056
R2070 C2733
R2736
R2754
R2758
R2771
R2737
R2746
R2747
R632 R2743
D526
R609
C588 IC506 Q2001
R2749
R2071
R2051 R2060
R2069
L504
D2004
Q2006
IC2006
C2019
R2063
IC2701
R608
J9504
R2710
P2702
C590
R2707
VA9506VA9505
FB527
L9501
R2062 R2706
Q2007
D525
R3511
R3531
C
R3510
R3530
R9515 TH2001
C3513
R9556 R2031
D8457
R9516 R3348 R2703
C9561
R3509
R618
R2702
FL3504
C2782
R8468
R9509 C2701 X2701
R668 SC8452
C8457
IC8454
R3508
IC9505
R3518
D8454
C8469
R669
R3519
R3512
D512
R667
R3507
R9517
R9513
R666
R3516
R9521
R9518
C9555 R9528 R9523 R3515
R9520
C9558
C9515
R9510
C9517 FB535 R3514
C9552
R3302 R3301
R3513
C595
R507
C9557
FL503
X9502
C9556 D9502
R615
FB534 P3301
R8459
C594
R506
D
P9603
C9509 FL502
C9508 R3532
R8414
R9502
R9504
FB533 R8451
R3304
C593
R505
R3506
T9501
R8455 R3305 R8458
FL501 R3536 R3537 R3535 R3534
R3306 C3317
R3545
R9501
R9503
D3302
R8415
IC509
C9507
C9506 FB504
R654
R3541
R635
D507
D1105 R3542
FB3303
R627
R636
FB505 R625 R3533
IC3503
FB1104 D9501
C1189 D508 R522
C1178
C1184
C1188
R1195
R628
FB506 R533
D509
R3540
R3539
R3538
IC501 R503
R9679
R9680
R549
R502
D510 FB9621 E
IC3303
FB9622
FB9601
C4438
R3397 R3396
C4422
C4445
C4421
FB9602
X4402
C4444 C4441 C2604
D3330 C3359 C2603
R4401 C2606
D3306 C3394
C3395 C2605
D3305 C2608
C2607
R3441 R3439 C2610
C3399 C2609
R3440 D3317 FB9606
R3443
D3316 R3401 FB9604
R3321
IC4405
D3303
R3427
D3314
C3362
R3406 C3389
R3429
C4447 FB9610
R3351
F
D3310
C9608
R3403
FB9607
R3407
R3408
R3413 R3371 C3372
R3320
FB9611
R1104
R3412 R3370 C3371
R3402
D3315
D3311
D3308
D3312
D3309
D3313
R3361 C9648
R1132
R3368
D3321 R3359
FB9608
R3369
R3360
R3349 R3347
R3358 C9649
Q1108
R3424
R3398
R4457
R3410 L9605
R9667 C9635
FB9612
C1121
R1213
R3365
R1161
R1181 R1180 R4459
R3430
R3431
C9669
R3314
R3313
R3310
R3309
R3331
C1183
C1190
R1206
C9606
C1109
IC1110
C9628
C9609 IC9604 IC9607
R3422 C9629
C1199
R1214 C1197 R3423 C9610
FB9620
FB9615
FB9613
G
R1141 C1193 R1115 C1182 C1181 R1204 R1203 R1205 C1176 C1177
R1209
C9612
FB9609 C9650
C9651
FB9619 C9653
FB9614 C9654
FB9616 C9655
C1195
C1127
C1108
R1144
C1106
R1143
R9652
C9652
R3433
R3340
R1130
R1217
R1129 R1131 R8461
R1187
IC1109 R8401 R8463 L9602 L9601
R8472 IC9605 C9611
R8416
IC8455
C9622
C1185
R8480
R8417 R8418
R8464 C8460
C8462 C8461
C1139
C1196
C563 C9621
R1186
C9602
C561 R8419
C9620 C9625
Q9601
IC9602
R592
R3432 C9601 R9666
IC503 R9671 R9672
R596
R1185
R602
L1501
L1502
L1503
L1504
C1107 C1125 C9623
D527 L9604
L1101 R3364
Q505
R1159
C555
R4414
C4462
C4461
L9603
R4413
D1514
R1162 L9606 C9645
C1540
R1537
R1582
R1584
R1166
R1538 IC9606
P9601
P9604
R1165 H
C9616
X4401
R1555
L1507
R1543
R1567
R1164 C9638
R1542
R1533
R1534
R1514
R1541
R4404
C1111
L1102 C1523 C9617
L1506 R1535
C1519
R4409
C2760
C2754
R2759
C2762
IC4402 R1531 R1526 C1532 C2810
IC3304
Q2703
IC1102 C1526 C1525 R2744
L1505
C2790
R4419
R1527
IC2704
R8411
R2816
C2768
R1525 C2806
IC2807
R2822
R2819
C1524 C3400 C2789
C4437
R8488
R8489
R1523
R2739
R8490
R8491
C2765
C2702
C1521
R4418
R2826 R2753
R1522 C1506
C2807
IC1504
R2820
R1580 R1521 C1505 C1504 R2818
R1579 R2821 VA8402
R4417
FB503 VA8404 VA8407
C502
R1520
J501 R1578 R1617
R512
R2823
C2809
R1550 R1616
R1549 R1615
C501
R514
R1548 R1614
R2825
C508
R524 R1547 R1613
FB502
R1546 R1612 I
R1568 R1611
R511
R517
C510
R523
R1571 R1610 FB1504
R1572
L9503
C564 R1573 R1574 R1515 R1592
R607
R1575 R1544 VA9502VA9501
IC1505
R598 R1576
C1501 R1501
D1520 R1540
R1581
R1583
R1585
R1597
R1598
R1599
R1600
R1601
R1602
R1603
R1604
R1605
R1606
R1607
R1608
R1609
R1577
C1534
R614 R612 R1516
C1527
FL516
FB531
D1517 C560
Q1501
D1515 R590
R606
D1502
IC1506
R601 C565
C569 R599
R600 C557
C566 R597
R605 R595
R589
IC1507
FB536
R603 FB532
SC8454
C556
C552
IC1501
R593
D1503
D1501
D1519 D1516
C1508
D1507
R1529 VA1505
R1530 VA1507
IC1502 IC1503 FB522 C554
C553 R1503 D1508 R1512 D1513
FB521
D1504
R1513 R1528 R1508 R1510 R1518 R1560
D1506 R1505 R1504 R1506
J9502
SC1504 SC1505 SC1501 SC1502 SC1503 J
MAIN Unit (Chip Parts Side-A)
LC-60LE632U/LC-70LE732U
LC-60LE632U/LC-70LE732U
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
1–3
19
18
FB9605 R2768
Q9606
FB9618 C2750
IC9609
C2785
C9646
D2710
Q9605
D9614
C9665
R9631
FB9603 C9642
C2736
R9654 R9664
C2741
IC9611 C2749
C2740
R9649
R9651 C2710
IC9601 C2792
Q2702
R9660 R2767
C2709
C2742
R9608 R2755
R9650
C2737
FB2710 R2799
R9648 R9646
D2707
FB2709
Q2701
17
R9643
D2701
R2817 R2762
C9644 C9607 C9637
R9607 C9605
R9639 C9643
R9628 C9636
C2713
C2708
C9641
C9604
C9630
VA8408
R2701 IC2707
C2753
R2723
R8405
R9632
C2703
D2705
R2772
VA8406
R2727
D2708
IC3301
C8473 C2743
C2730
C2752
R2784
C2707 R2731
R2839
R2764
C3301
R2770
R8412
R2714
R9627
C3302 C2722
R2708
R2709
R2715
R9611
R9612
16
R2838
C9668
R9668 FB2702
R2777
R2778
R2776
C2783
Q9603
R9633
VA8401
R8404
R9634
R9610 D2704
R9609 C9614
Q9604
C2715
C9624
R8402
R2841
R8406
R9613
C9631
R2842
R9623 R9620
Q506 C2714
C559 R2751
C558
R591
C2746
VA8403
FB2707 R2840
D9604 D9603 C2723
R2775
R8410
FL3508
VA8405 D9606
R8403 R8413 C2739
R9626
C2712
C2784
R9625
C2727
C3534
R9624
R9615 C9626
C9633 C3521
FL3507
R3548 R3547
C3527
C9632 C3524
C3526 C2725
15
R3546
R3543
C3519
D2702
C3523
FL3505
C3512 FB2608
R588
R604
FB2604
C3510
R3517
FB2605
FB2616
C3516
FB9502 C9512
14
R9511 R9508
FB2601
FB2602
R3520 R3521
C3518 R3522
C3514
C3325 FL3506
R3409
R3308
IC9502
R9507 R9506
C8403 R3307
C3515
C3319 C3517
IC8405
C3321 R3312
R9505
C2819
R3426
R3425
C2821 R3419
C3331
R3420
FB3305
C3304
FB3304
C9615 FB3302
R2831
IC8404
C8402
R3338
C3338
IC9603
R2832
C3337
X2807
C3342
R3411
C3307
R2620
C3324
R3526
R3527
R3528
R3529
R2828 R3421
R2613
R2829
C9613 R3428
C3318 C3320
IC2808
C2816
R2827
C2822
R3322 R2602
C2815 C3313
R3319
R2824 C3330
C2814
C3329
C3328 C3312
13
R3341
C2817
C1528 C3327
C2818
R3436
C3334 R3418
C3505
C3344
C3306
C2811
C2813
R3417
C3386
C3504
C3335 C3392
R2637
C3353
C3355 FL3501
C3347
Q2603
R2638
R2635
C1502
R1511 C1535 R1517 R1519
R1502
FB2631
R2639
R2653
R3503
FB2629
C3326 C3323 FL3502 C3533
C3345
C3322 FB2628
R3343
C3343
R2645 FB2627
R1589 R1590
R3335
R3326
R3339
FL3503
C3381 R3390 FB3301 FB2626
R3345
R3346
R3325 FB2625
C3507
R3435
R2642
R2643 R2636
R1595
FB2624
R3337
R3416
R3317
R3318
R3316
R3315
X3301
C3391
R3336
R9604
C3380 R3389
R2615
R3334 R2649
R1594 R2648
R1596
R3391
R3393
R3394
12
R1563
C1509
R1587 R1565 C3379 R3388 C3314 R3303 FB2635
C3388
C3373 R3379
IC2005
C3378
C3382
C3384
C3385
C8456
Q1510
R2053
R1593
R1562
C3374
VA1508
IC2003
R3414
R3404
IC3302
R1566 R1586 R3405
C2021
FB2634
R3330
C2017
R3415
C3311 R8481 R2047
Q3301 R2059
R3400
R1558
R1559 Q1509
D3331
R8487
R2064 R2065
D2005
C2008
R1569 FB2632
Q1508
C3358 R3363
FB1537 R2066
D3326
D3323
D3328
D3307
D3304
D3319
D3327
R1621 R1570
C1555
C1554 IC2002
C1564
IC8401
R1623
R1618
D2002
C1550
D8456
C1563 IC2007
C2018
D3322
D3325
D3324
D3318
D3320
R8483
R8477
C3366
11
R3383
C3370
IC1509 C1546 R1539 R3374 R3373 R3375 R3381 R3382 R3377 R3376 R3384 C3375 R3395
R2029
Q2004
Q2003
C1531
R3378
R1588
R1629
C1533
C1520
R1591 R1551
C1547
R8453
R2035
R1553
C1543 C1562 C1522 R1556 D2007
R8452
R2002
Q2002
C1539
C1565
R1622
C1512
C1511
1–4
R1524 R2050
C1538
D1518
R1545
R8420
R1620 FB1538
C1556 C8458
R658 C578
R620
C1557
C1558
FB1505
R501
C579
C2020 C577
C1566
C1553
D515
FB4410
C521
R551
C1515
C1517
Q508 R659
C1552
R2058
R661
Q2005
IC2004 Q507
C1551
10
R2057
R660
R2017
VA1501
VA1503
D1505
R4406
D4401
R4403 R3355
C4402
FB4401
C4405
C4404
FB1105
R3356 R4453
R3357
R4411
C4467
L4401
D1510
C4406 C4407
C1198
C4413
C4409
C4415
FB4403
D1511 R4402
R4458
FB2618
FB2619
C4408
D4402 R4448
FB4402 C4412
R4412
C4465 R4449
C4458
9
R4451
R4452
R1107
R1106
C4442 C4443
C1507
C4418
IC4401
C4417
C4440
C4452
R1561
C4439
C4457
R3366
C4427
FB2620
FB2630
R4416 C4414
R1215
R1188
R4450
R1216
C1126
R610
C4455
C4454
VA1510
VA1509
C4464
C4463
R1190 R611
C4410
R513
Q2011
R616
R572 R562
R515 R528
R1140 C4449 C4416 FB514
R538
R548
C518
FB2001
C4448
C524
C509
R559
R1127
R1192
R1191
R1139 D2001
D2013
R1120 R1108 R1207
8
R1145
C505
R525
R543
C514
R536 R558 R2007
FB2005
R1134
R1184
C1113
C1117 R1128
C527
FB513
R1125
R1111
C1115
R1137
R1138
R617
FB2003
C1116
D1104
IC1105
R1142 FL504
R1136
C544
R2005
R579
C529
FB519 R2004
FB2012
C1201
C1119 R1197
C2023
R1126
D1103
D1101
C1200
FB2013
R527
C507 R534
R1133 C1114
R1105
FB510
R557
R510
D2009
C516
R546
FB1101
C1102
R1122
C1104
C520
C1120 C1101
FB2002
D1102 R1110 R509
C4459 R521
FB509
FB2014
R531
C513
R542
R556
7
C504
C4451
FB2011
R1147
R1154
R1155
R1148
D2008
R4432
C4433
C4450
R1157
R1156
R1158
C4436
C526
R586 R2022
IC4403
FB520 R2020
FB2024
C545
C4424
Q2010
R2067
R2018
IC4404
R4433 R4437
R4431
FB4409
C547
C4460
R580
FL505
C534
C4423
R4439 C4435
C4468 FB2023
R582
R4434
C1192
R4425
FB526 C596
FB540 VA508
R4446
FL511
IC1108
FL507
R4435
R561
C525
R540
C536 R520 FB516 R537
R529
C512
R550
C519
C1191
R4444
VA509
R560 FB541
C597
C528
6
R4424
R539
FL512
D4403 C4466
R566
R574
R519 FB515
R526
C506
R545
C515
R541
C1112
L1105
L1104
R4454
R4423
VA510
FL513
C598
C1118
C1131
R1168
R1167
FB524 R577 FB529
C4430 FB4408
C4431
C549
R584 FL514
C546
C540
R581
IC1103
FB9511
R1109
C1122
C550
R585 FL515
R4430
C4432
C541
R578 FB530
C1132 R633
R4422
FB9513
C4429
5
C537
R576 FB528 C607
FB511
C523
FL510
C548
R1211
R4421
R583
C608
R587
FB512
R553
R4441
R4443 L1107 C522
R552
C2781
R4436
C2769
L1103 C9513 C9514
R9524
R9525
R9526
R9527
C1129
R1169
R2782
C2772
C9501 C9502 C2787 R554
R1170 R2781
C2788
C9504 C9505 C530
C2786
R4420
C2771
C9564
R2790
IC2706
R2783
C2770
FB9510
R4438
C4434
R2788
C9562
R4426
R9554
4
C531
C9554
IC1107
C9560 R555
C9559
R9519
C9563
FB9509
C9518
R9522
R1163
C9553
C1154
IC9503
R1151 C9503
C1123
R1135 R9555
R1202
Q1106
C1153 R1124 R1171
R1208
FB9504
R1201
R1117 R1123
R1179
Q1107
R1199 C1161
C1145 C9516
R1212 FB9508 FB9503
R1149
IC1104
R1210 FB9507
R1178
C1140
C1138 R1114
R1112
Q1103
Q1102
C1173
C1141
R1113 R1177
FB1103 C1105
3
R1176
LC-60LE632U/LC-70LE732U
2
1
G
A
H
C
E
F
J
I
LC-60LE632U/LC-70LE732U
[2] R/C OPC Unit
R/C OPC Unit (Side-A) R/C OPC Unit (Chip Parts Side-A) R/C OPC Unit (Side-B)
J
R120
H
C103
C104
G
F
D104
C106
R106
E
R109
R113
IC101
P103
D
C105
C101
C102
C
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
1–5
LC-60LE632U/LC-70LE732U
[3] ICON Unit (LC-70LE732U only)
P201
D P202
C252
R202
D252
D251
R212
R203
R205
R214
R204
R201
C251 D202
C C253
R206
R213
R252
R211
R251
D206
C254
D201
D205
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
1–6
LC-60LE632U/LC-70LE732U
CHAPTER 2. SCHEMATIC DIAGRAM
LC-60LE632U
Service Manual
CAUTION:
This circuit diagram is original one, therefore there may be a slight
difference from yours.
SAFETY NOTES:
1) DISCONNECT THE AC PLUG FROM THE AC OUTLET
BEFORE REPLACING PARTS.
2) SEMICONDUCTOR HEAT SINKS SHOULD BE REGARDED AS
POTENTIAL SHOCK HAZARDS WHEN THE CHASSIS IS
OPERATING.
2–1
LC-60LE632U/LC-70LE732U
[2] SCHEMATIC DIAGRAM
MAIN Unit-1
MAIN1(TUNER)
J
DUNTKF733WE19/DUNTKF733WE17
H
*TU1105
AA073WJQZ
US
ATSC-DIF
*R1112 *C1141
10K 10u 16V
1 2 3 4 5 6 7 8 9 10 11 12 KZA837WJQZ
*C1138
0.1u K 9.0
TL1108
*R1178 10V
*Q1102
TU_SIF 3.8 2SC3928AR
0
G
*R1177
100
3.2
D__IF+
D__IF-
*R1113
TU_GAIN_SW
N_TU_RESET
IF___AGC
*R1176
TU_AIF+/CVBS
10K 330
TO MAIN10(POWER)
IF+1.8V
TU_AIF-/SIF
TU_SCLK
TU_SDATA
010
IF+3.3V
D+5V
010
D+3.3V
*C1145 *R1117 *R1121
10u 10V 10K 390
F *C1153
*R1179 KZA616WJQZ *R1119 0.01u
TL1109
0 10 25V
AT+5V
TU_CVBS
TUNER_CVBS
3.3
0
1000P
C1124 *R1143
004
TL1107 0.1u 100 *R1212 TUNER_CVBS
C1110
0
0.01u 25V
*R1151
*TL1112
4.7K
C1185 *R1149
TUN_AIF+/CVBS 0 004
0.01u TL1106 *R1158 CPU_ATV_IFP
D 25V
0 *R1150
*C1123 *TL1110 *R1201 0 004
0.01u 0 CPU_ATV_IFN
D_IF-
*C1127 N_TUN_RST 004
10u 16V *TL1111 N_TUN_RST
KZA837WJQZ D_IF+
*R1202
0
*R1196 *R1197
R1211
2.2K 2.2K
2.2 1/2W TO MAIN11(DEMOD_CI)
TU_SCL 011
TWF TU_SCL
C
5 4 TU_SDA 011
TU_SDA
Vout Vin
C1195
4.7u
IC1109 C1196
L1107
10uH
011
ATSC_IF_AGC
10V 4.7u *R1160
KZA761WJQZ
S170B18U 10V CEM *C1126
KZA761WJQZ 0.01u 4.7K
*C1129 *R1148
25V 0 011
10u
ATSC_IFN
GND 16V
ON N.C *R1147
KZA837WJQZ 0 011
B 1 2 3 ATSC_IFP
D+3.3V
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2–2
LC-60LE632U/LC-70LE732U
DUNTKF733WE19/DUNTKF733WE17
TO MAIN10(POWER)
010
J 010
D+3.3V
D+5V
R658
0 010
BU+3.3V
TO MAIN7(UCOM)
007
IR_RS
C578
0.1u
10V
11
R608
I FB527 100
*C577
10u
R620
10K TO MAIN6(FLASH)
5
A042WJ 1/10W 10V 006
KZA616WJQZ UART_CPUTO232C
9
006
UART_232CTOCPU
4
CTS R609
8 FB525 100 3.3 3.3 0 0 0 3.3 0 3.3
A042WJ 1/10W
16 15 14 13 12 11 10 9
TxD 3
Vcc GND T1_out T1_in R1_out
RTS SHDN NC
7 FB523
A042WJ
FORCEON
IC506
RxD 2
R572 DSR M3221EIP
*R562 R613
4.7K 6
100 VA501 D525 100
CVBS2_PLUG VA502
VXA005WJ EXA697WJQZ 1/10W EN C1+ V+ C1- C2+ C2- V- R1_in
DCD 1 VXA005WJ
*R513 *R536 5.6V
*FB513
1K *R525 1K 1 2 3 4 5 6 7 8
A074WJ 10
CVBS2_IN_R 100K
*FB519 0 3.3 3.3 3.3 3.3 0 0 0
A204WJ *R617
0 SC/Y_CVBS2_IN
*C505
1000P *R538
*R515 *FB514 SC504
1K 1K *C527
A074WJ NA818WJ
CVBS2_IN_L 1000P D-SUB
C579 C580 C584 C586
RS232C 0.1u
*C509 *J510 0.1u 0.1u 0.1u
Vertical type
H 1000P
*C524
ZA100WJQZ *R579
75
*C544
470P
10V 10V 10V 10V
1
SC501
2
NA816WJ
R573 PC_IN FB504
3
R531 R563 4.7K 16
R509 FB509 Vertical Type A042WJ
R521 1K 100
1K A074WJ CVBS1_PLUG
4
CVBS1_IN_R 100K 6 R522
220
1 11
5
C526 D508 D515
C504 7 FB505 EXA697WJQZ
EXA697WJQZ
TO MAIN3(HDMI)
R534 1000P FB520
R510 1000P FB510 A042WJ R654 *R501
A204WJ 5.6V 4.7K 5.6V CZ
1K 1K CVBS1_IN 2 12 0 003
A074WJ R625 VGA_PWR5V
CVBS1_IN_L D507
6
8 EXA697WJQZ 1K R655
4.7K *R502
5.6V 0 CZ 003
3 13 VGA_SCL
7
C507 R627
1000P R586 9 47K *R503
2 1 0 CZ 003
C520 0 CVBS_COM VGA_SDA
8
1000P 4 14
D510
R580 C545 FB506 4 3
10 EXA697WJQZ
9
R527 75 470P A042WJ 5.6V
100K 50V 5 15 6 5
1/4W
G FB507
10
17 A042WJ R533
D509 8 7
220
EXA697WJQZ
R574
5.6V D512
4.7K
1SS184
S1_PLUG R547
11
R519 R539 FB515 100
R526 1K 1
1K A074WJ
COMP1_IN_R 100K
12
3
2
C528
13
C506
1000P R540 1000P
R520 FB516
1K 1K A074WJ
COMP1_IN_L FB535
TO MAIN4(CPU)
A527WJ
14
C512 R628 004
PC_VSYNC DSUB_WP
1000P R507 1K
C525
15
75 PC_HSYNC
1000P FB534 004
A527WJ 1/4W SC/Y_CVBS2_IN
16
R529 PC_BLUE
100K R506 004
17
FB533 PC_GREEN COMP1_Y
75
A527WJ 1/4W
PC_RED 004
18
COMP1_Pb
R505 004
75 COMP1_Pr
F 1/4W 004
COMP1_COM
R615 TO MAIN4(CPU)
0 CZ PC_RGB_COM
004
PC_HSYNC
004
R575 PC_VSYNC
R570 4.7K
004 004
100 CVBS1_IN
COMP1_PLUG PC_RED
R504
10K
J504
EA113WJQZ
R606
33 TO MAIN9(AUDIO AMP)
1
FB521
A074WJ 1/4W TW
R585 C550 009
10P MONI_HP_R
56
2
50V
1/4W
009
MONI_HP_L
3
FB522 Q506
009
A074WJ IMH23T110 Q510 AUDIO_MUTE
4
ISA1530AC
D HP Jack/AUDIO OUT
0 0
3.2 3.3 009
3
HPOUT_MUTE
2.66
R672
2
2.66 2.5 4.7K
5
C554 R590 R593
100 C560
100
1000P 1000P R671
1/4W 1/4W
TW 0 0 1K
TW
1
R607
33
1/4W
R591 R594 TW
100K 100K
C558 C559
0.01u 0.01u TO MAIN4(CPU)
004
C 004
COMP1_SOY
CVBS1_IN_R
004
CVBS1_IN_L
*R667
CVBS2_IN_R 0 004
CVBS_IN2_R
*R669
CVBS2_IN_L 0 004
CVBS_IN2_L
004
COMP1_IN_R
004
COMP1_IN_L
B D527
RFT4112S
3.6
IC503 0
3
7
6
004
2.4
OPT_OUT
2
1
3
5 5 AUDIO_MUTE
1
R592
100
SPDIF BUFFER R602
47K
Q505
& SPDIF MUTE
T7SET08U1E RT1N141U
MUTE
C555
0.1u
10V
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2–3
LC-60LE632U/LC-70LE732U
D1511
J 1SS184 DUNTKF733WE19/DUNTKF733WE17
SC1505 D1517
1 HDMI4
ZA264WJQZ 1SS184
3
20 21 1
SC1501 2
HDMI3 2 4 6 8 10 12 14 16 18
ZA264WJQZ 3
11 13 15 17 19 2
20 21 1 3 5 7 9
22 23
2 4 6 8 10 12 14 16 18
1 3 5 7 9 11 13 15 17 19 TL1512
22 23
HDMI3_POW5V
TP1510
TP1507
TP1506
TL1511 TL1513
TP1504
TP1505 R1536 TO MAIN7(UCOM)
TL1501 TL1510 HDMI_CEC_ 0 007
HDMI_CEC_
TP1501
HDMI_CEC
TL1506 HDMI3_HPG
VA1501
VA1503
VXA074WJ IC1506 TO MAIN4(CPU)
VXA074WJ 39V
39V CM123408
1.1pF
1.1pF
004
I OUT4-
HDMI4_CLKN_222.75MHz
HDMI_OPT_OUT
8
IN4-
IC1501 HDMI4_CLKP_222.75MHz
VA1509
VA1510
VXA074WJ
OUT4+ VXA074WJ 39V
CM123408 39V
10
IN4+
7
1.1pF
1.1pF
HDMI3_CLKN_222.75MHz HDMI4_D0N
OUT4- OUT3-
11
8
6
IN4- IN3-
L1501
HDMI3_CLKP_222.75MHz HDMI4_D0P
OUT4+ OUT3+ FA228WJ
TO MAIN4(CPU)
10
12
IN4+ IN3+
5
SW_TMDS_CLKN_222.75MHz_
HDMI3_D0N HDMI4_D1N 4 3 SW_TMDS_CLKN_222.75MHz
OUT3- OUT2- 004
11
13
6
4
IN3- IN2-
SW_TMDS_CLKP_222.75MHz_
1 2 SW_TMDS_CLKP_222.75MHz
L1502 004
HDMI3_D0P HDMI4_D1P FA228WJ
OUT3+ OUT2+
12
14
IN3+
3
IN2+
8
R1561
HDMI3_D1N 47K HDMI4_D2N 4 3 SW_TMDS_D0N
OUT2- OUT1- 004
IN1-
13
15
4
2
IN2- VRK
SW_TMDS_D0P_
D1512 1 2 SW_TMDS_D0P
L1503 004
1SS420
7
HDMI3_D1P HDMI4_D2P FA228WJ
OUT2+ OUT1+ IN1+
14
16
3
1
H IN2+
R1507
HDMI4_HPG
HDMI3_D2N 4 3 SW_TMDS_D1N
OUT1- 27K 004
IN1-
15
2
HDMI4_SDA SW_TMDS_D1P_
1 2 SW_TMDS_D1P
HDMI_CEC_ L1504 004
HDMI4_SCL
HDMI3_D2P FA228WJ
OUT1+ IN1+
16
1
HDMI4_POW5V
R1540
4 3 SW_TMDS_D2N
HDMI3_SDA 10 004
D1508 SW_TMDS_D2P_
HDMI3_SCL 1 2 SW_TMDS_D2P
1SS184 004
SC1502 2
HDMI2
ZA264WJQZ
20 21
2 4 6 8 10 12 14 16 18
TO MAIN10(POWER SUPPLY)
1 3 5 7 9 11 13 15 17 19
22 23
010
HDMI2_POW5V BU+3.3V
C1515 010
A192WJ
G
FB1505
A192WJ
0.1u C1517 C1557 D+3.3V
FB1538
10V 1000P 0.1u *C1558
TP1508
10V 1000P
SW_TMDS_D0N_
SW_TMDS_D1N_
SW_TMDS_D2N_
TP1511
SW_TMDS_D0P_
SW_TMDS_D1P_
SW_TMDS_D2P_
010
D+5V
TL1502 TL1507
TP1502
SW_TMDS_CLKN_222.75MHz_
SW_TMDS_CLKP_222.75MHz_
010
M+1.8V
IN4-
ON GND NC
OUT4+ HDMI2_CLKP_222.75MHz 1 2 3
10
IN4+
7
R1554
F OUT3- HDMI2_D0N 10K R1619 100K
11
IN3-
R1568 5.1
NC
NC
NC
NC
NC
NC
NC
NC
HDMI4_CLKN_222.75MHz R1623 100K
100
80
79
78
77
76
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
HDMI4_CLKP_222.75MHz
12
IN3+
5
C1523
1u 10V
R1572 5.1
HDMI4_D0N
TXCN
CKZ
TXCP
TX0N
TX1N
TX2N
TX0P
TX1P
TX2P
R1XCN
R1XCP
R0XCN
R0XCP
RSVDL
RSVDL
R0X2N
R0X1N
R0X0N
VDD33
VDD12
R0X2P
R0X1P
R0X0P
Q1510
AVDD12
HDMI2_D1N
TVDD12
TO MAIN6(FLASH)
2
TPWR_CI2CA
4
IN2- R3PWR5V
SSM6N15FU
75
1
HDMI4_D0P 0
47K R1X0N R1555 006
VRK 10 SCL1
HDMI2_D1P *R1562
OUT2+ HDMI2_HPG 0 006
14
IN2+ R1X0P
74
2
SDA1
1
CBUS_HPD3
6
OUT1- HDMI2_D2N
IN1- R1X1N R1541
15
73
DSCL3
3
R1574 5.1 10 VRK
HDMI4_D1N
5
2
HDMI2_SCL
HDMI2_D2P R1575 5.1
OUT1+ IN1+ HDMI4_D1P 8 7
R1X1P DSDA3
16
72
4
HDMI2_SDA
R1576 5.1 6 5
HDMI2_SDA HDMI4_D2N
4
3
D1509 HDMI2_SCL R1577 5.1 R1X2N CSCL 4 3
71
5
HDMI4_D2P
1SS184
2 1
1 R1X2P CSDA
70
6
SC1503
3
E HDMI1 ZA264WJQZ
2
C1511
0.1u 10V R1565 4.7K
20 21 VDD33 TP1519
C1512
69
7
2 4 6 8 10 12 14 16 18 GPIO1 R1533
1000P R1566 4.7K
10K
*C1510
1 3 5 7 9 11 13 15 17 19 10u
22 23 R2XCN TP1520
10V GPIO0
68
8
R1581 5.1 R1534
HDMI3_CLKN_222.75MHz KZA616WJQZ
HDMI1_POW5V 10K R1514
R1583 5.1 10K
TP1512 HDMI3_CLKP_222.75MHz R2XCP
R1595 INT
67
9
TP1509
1K R1585 5.1
TL1508 HDMI3_D0N
66
10
HDMI3_D0P 10K
TL1503 TL1504
*R1584
TP1503
*C1538 10
TL1535 10u 10V
R2X0P VGA_PWR5V
R5PWR5V(VGA) KZA616WJQZ
65
11
C1540
C1539 1u 10V CKZ
R1589 VA1508 0.1u 10V
VA1506 R2X1N SBVCC5
4.7K VXA074WJ
64
12
*C1565
VXA074WJ
39V
39V
1.1pF
*R1519
0
HDMI3_D1N
R1598 5.1
IC1504 1000P
R1524 10 R1545 0
1.1pF
SII9387
IC1503 HDMI3_D1P
R1599 5.1
R2X1P
NC
HDMI_RSVD
63
13
CM123408 R1600 5.1
HDMI3_D2N
HDMI1_CLKN_222.75MHz VGA_SCL
OUT4-
D R2X2N 3
9
IN4-
62
14
HDMI3_D2P *R1537
HDMI1_SDA 10 VGA_SDA
1 2
HDMI1_CLKP_222.75MHz
OUT4+ R1553
DSDA5(VGA)
10
IN4+
7
R2X2P
61
15
10K
HDMI1_SCL C1513 R1556 FB1512
HDMI1_D0N 0.1u 10V 10 HDMI1_POW5V
OUT3- A192WJ
VDD33
11
60
16
1000P
C1522 R1567
Q1508
*C1543 1u 10V
HDMI1_D0P 0 2SA2061
OUT3+ 10u R3XCN CKZ
12
IN3+ CBUS_HPD4
5
10V
59
17
HDMI2_CLKN_222.75MHz
R1602 5.1 KZA616WJQZ 3.2 3.3
IN2- DSCL4
58
18
R1569
R1582
R1604 5.1 HDMI1_SDA 2.5 10K
HDMI2_D0N 10
1 2
HDMI1_D1P
OUT2+
R1605 5.1 R3X0N DSDA4 R1551
14
IN2+
57
19
HDMI2_D0P 10K
R1552
OUT1- HDMI1_D2N 10 HDMI3_POW5V
IN1- R3X0P R2PWR5V R1558 Q1509
15
56
20
330 RT1N141U
C1520
HDMI1_D2P 1u 10V
OUT1+ IN1+ CKZ HDMI3_HPG
R3X1N
16
CBUS_HPD2
55
21
R1606 5.1
HDMI2_D1N
C HDMI2_D1P
R1607 5.1 R3X1P
DSCL2 3 4
HDMI3_SCL
54
22
53
23
HDMI2_D2P
MICOM_VCC33
R3X2P *C1531
52
24
10u 10V
C1544 R1557
AVDD12 KZA616WJQZ 10
CBUS_HPD0
0.1u
CBUS_HPD1
HDMI4_POW5V
ETH_RX1N
ETH_RX1P
ETH_TX1N
ETH_TX1P
R0PWR5V
SPDIF_IN
R1PWR5V
EPWR33
51
25
C1545
DSDA0
R4XCN
R4X0N
R4X1N
R4X2N
VDD33
VDD12
DSCL0
R4XCP
DSDA1
R4X0P
R4X1P
R4X2P
R1542
DSCL1
HECN
HECP
0.1u
*C1561 10K
1000P
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
C1519
NC
NC
NC
1u 10V
CKZ
C1505 C1526
0.1u 0.1u C1564
10V 10V 1000P
*C1555 C1533 R1629
GND_A 10u 1u 10V 10K
*C1549 10V CKZ
R1522 R1621
10u R1521 KZA616WJQZ
B 10V
KZA616WJQZ
51 F 51 F
R1525
75 F R1527
75 F
C1554
0.1u
1K
10V
A192WJ
10V
FB1515
10V
*C1563
1000P
3
C1521
5.1
5.1
5.1
R1531 TO MAIN2(TERMINAL)
5.1
1u 10V
5.1
5.1
10
5.1
5.1
VGA_PWR5V 002
VGA_PWR5V
R1614
R1615
R1610
R1611
4
VGA_SCL 002
R1616
R1617
VGA_SCL
R1612
R1613
VGA_SDA 002
HDMI1_CLKN_222.75MHz
HDMI1_CLKP_222.75MHz
VGA_SDA
HDMI4_HPG
HDMI4_SDA
HDMI4_SCL
HDMI1_D2N
HDMI1_D0N
HDMI1_D1N
HDMI1_D0P
HDMI1_D1P
HDMI1_D2P
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2–4
LC-60LE632U/LC-70LE732U
*R3423 2.2K
TO MAIN10(POWER SUPPLY) FB3301
2.2K
A192WJ
010 CPU_BU+3.3V TO MAIN12(LAN_USB)
STB+3.3V
*L3301
J *C3322
10u
C3323
0.01u
C3326
0.01u 10uH CEM
CPU_A3.3V CPU_OS_CLK2 *R3431 220 011
TO MAIN11(DEMOD_CI) CPU_DATMDI_RJ45_TP
012
CPU_DATMDI_RJ45_TP
LAN_LED1 TP3356
C3324 C3328 C3329
010 0.1u 0.1u 0.1u C3338 C3341 C3343 C3345
D+1.1V C3340 C3342 C3344
1u 0.01u 0.01u 0.01u C3346
TO MAIN5(DDR) 16V 16V 16V 0.01u 0.01u 0.01u 0.01u
C3320
005 C3318 4.7u LDM_CLK
D+1.5V 2 1 2 1 2 1 C3331 C3333 C3335 C3337 TP3340
4.7u 10V
C3304 10V 0.1u C3332 0.1u C3334 0.1u C3336 4.7u
KZA761WJQZ 10V LDM_CS
4.7u 4 4 4 0.1u 0.1u 0.1u TP3341
KZA761WJQZ 3 3 3 KZA761WJQZ
10V
TO MAIN11(DTV_CI) KZA761WJQZ C3305
C3308
C3309
C3310
C3312
C3313
C3315
C3316
LDM_DI TP3342
1u 0.01u 0.01u 0.01u 6 5 6 5 6 5
011 0.01u 0.01u 0.01u 0.01u
CPU_A+1.2V C3396 LDM_DO TP3343
0.1u
8 7 8 7 8 7
LDM_VSYNC TP3344
TL3301
I 5 4 *C3302
10u 10V
VOUT VIN KZA616WJQZ
IC3301
S172B12U
1
2
7
TO MAIN5(DDR) 330 F
C3301 005 DEMOD_TSVAL 011
0.1u B_DDR_RESET ATSC_TS_VAL
3
4
B_DDR_BA0 B_DDR_A7 B_DDR_A4 B_DDR_MCLK0N_621MHz B_DDR_DQS1P
5
10V 005 B_DDR_A5 B_DDR_A11 B_DDR_A10 B_DDR_DQS0P B_DDR_DQ9 VBO_TXA- VBO_TXB- VBO_TXC- VBO_TXD-
005 RVREF6 DEMOD_TSSYNC 011
B_DDR_CS0# A_DDR_RESET NC NC NC NC NC NC NC NC NC NC NC NC NC NC ATSC_TS_SYNC
TO MAIN8(PANEL)
5
6
3
005 005
B_DDR_RAS# A_DDR_CS0# R3308 B1 B2 B3 B4 B6 B7 B8 B10 B11 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 B31 B32 DEMOD_TSDATA0 011
008 ATSC_TS_D0
7
8
005
1
VBO_TXA- 005 330 F
B_DDR_CAS# A_DDR_RAS#
008 B_DDR_ODT B_DDR_A6 B_DDR_A1 B_DDR_DQ8 B_DDR_DQ12 B_DDR_DQM1
VBO_TXA+ 005 005 B_DDR_CS0# B_DDR_A13 B_DDR_BA2 B_DDR_DQ14 B_DDR_DQM0 B_DDR_DQ13 VBO_HTPDN
B_DDR_WE# A_DDR_CAS# TO MAIN1(TUNER)
008 C3319 NC NC NC NC NC NC NC NC
VBO_TXB- 005 005
B_DDR_ODT 0.01u
A_DDR_WE# C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C17 C19 C21 C23 C25 C27 C29 C30 C31 C32
008
VBO_TXB+ 005 005 CPU_U2RX
B_DDR_CLKEN PNL_POW
A_DDR_ODT
008 005 B_DDR_A0 B_DDR_DQ10 B_DDR_DQ3
VBO_TXC- 005 R3312 56
B_DDR_BA0 A_DDR_CLKEN B_DDR_A8 B_DDR_WE# B_DDR_DQ7 B_DDR_DQ1 B_DDR_DQ15 VBO_LOCKN
008 005 NC NC NC NC NC NC NC
RVREF6
VBO_TXC+ 005
B_DDR_BA1
H VBO_TXD-
008
B_DDR_BA2
005
A_DDR_BA0
A_DDR_BA1
005
D1
RVREF6
D2 C3325
0.01u
D3 D4 D5 D6 D7 D8 D9 D10 D11 D13 D14 D15 D17 D19 D21 D23 D25 D27 D29
CPU_U2TX
D30
STB_CPU
D31
LDM_DO
D32
008
VBO_TXD+ 005 B_DDR_RESET B_DDR_RAS# B_DDR_DQ6
005 A_DDR_BA2 B_DDR_CAS# B_DDR_DQ5 B_DDR_DQ0 B_DDR_DQ4
008 B_DDR_A0 NC NC NC NC NC NC NC NC NC NC NC NC
VBO_LOCKN 005 *R3356 0
B_DDR_A1 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 E15 E16 E17 E18 E19 E20 E22 E23 E24 E25 E26 E27 E28 E29 E30 E31 E32 DEMOD_RST 011
008 005 ATSC_DEMOD_RST
VBO_HTPDN 005 A_DDR_A0 A_DDR_DQ22 N_TUN_SAT_RST LDM_CLK LDM_CS
LAMP_ERR_CPU
B_DDR_A2 A_DDR_DQ20 R3352
005 R3344 12K
005 A_DDR_A1
10K
F
R3424
B_DDR_A3 B_DDR_DQ2
005 4.7K
005 A_DDR_A2
001
B_DDR_A4 005 F1 F2 F3 F6 F7 F9 F10 F13 F14 F18 F19 F20 F21 F22 F23 F28 F29 F30 F31 F32 SIF
005 A_DDR_A3 A_DDR_DQM3 A_DDR_DQ18 LDM_DI LDM_VSYNC
B_DDR_A5 A_DDR_DQ16 CVBS1_PLUG
005
005 A_DDR_A4
B_DDR_A6 005
0
005 A_DDR_A5
B_DDR_A7
R3439
005 G1 G2 G3 G4 G5 G7 G14 G24 G26 G30 G31 G32
005 A_DDR_A6
B_DDR_A8 A_DDR_DQS2N A_DDR_DQM2 A_DDR_DQ27 CPU_LED UCOM_RST CVBS2_PLUG
005 A_DDR_DQS2P A_DDR_DQ29 R3327 47 CPU_ATV_IF+ C3394 001
005 A_DDR_A7 R3440
CPU_ATV_IFP
B_DDR_A9 0.01u 0
005 CPU_ATV_IF- C3395 001
005 A_DDR_A8 R3443
CPU_ATV_IFN
B_DDR_A10 0.01u 0
005
005 A_DDR_A9 H1 H2 H3 H4 H5 H6 H8 H14
B_DDR_A11 A_DDR_DQS3N A_DDR_DQ25
005
005 A_DDR_A10 A_DDR_DQS3P A_DDR_DQ31 R3329 47
B_DDR_A12 005
005 A_DDR_A11
B_DDR_A13
G A_DDR_A12
005
J1 J2 J6 J8 J14 J30 J31 J32
005 005 A_DDR_DQ19 COMP2_PLUG N_CPU_USB1_FLG
B_DDR_MCLK0P_621MHz A_DDR_A13 UCOM_MODE
A_DDR_DQ17
005
B_DDR_MCLK0N_621MHz
005 NC NC
A_DDR_MCLK0P_621MHz
005 005 K1 K2 K4 K6 K28 K29 K30 K31 K32
B_DDR_DQM0 A_DDR_MCLK0N_621MHz A_DDR_DQ21 CPU_GCK5 CPU_GPIO13 S1_PLUG
005 A_DDR_DQ23
B_DDR_DQM1
D3318
005 005
2
B_DDR_DQS0P A_DDR_MCLK1P_621MHz A192WJ 1SS226
NC NC
3
005 005 FB3303
B_DDR_DQS0N A_DDR_MCLK1N_621MHz L1 L2 L3 L4 L5 L6 L7 L11 L12 L13 L14 L15 L16 L22 L23 L27 L28 L29 L30 L31 L32
1
005 A_DDR_MCLK1N_621MHz A_DDR_DQ24 A_DDR_DQ30 N_TUN_RST AMP_PROTECT
COMP1_PLUG
B_DDR_DQS1P 005 A_DDR_MCLK1P_621MHz A_DDR_DQ26 A_DDR_DQ28
A_DDR_DQM0
2
005 D3319
B_DDR_DQS1N 005
A_DDR_DQM1 1SS226
3
NC
005 M3 M4 M5 M11 M12 M13 M14 M15 M16 M17 M19 M20 M22 M23 M28 M30
1
005 A_DDR_DQM2
B_DDR_DQ0 A_DDR_ODT A_DDR_CLKEN TUN_GAIN_SW
005
005 A_DDR_DQM3
A_DDR_CAS#
*IC3303 D3320
2
B_DDR_DQ1 1SS226 C3375 R3395
005
A_DDR_DQS0P IXD220WJQZ 0.01u 68
3
005 NC NC NC PC_RP 002
B_DDR_DQ2 PC_RED
005
1
005 A_DDR_DQS0N N1 N2 N3 N4 N5 N6 N11 N12 N13 N14 N15 N16 N17 N18 N19 N20 N21 N23 N27 N28 N29 N30 N31 N32 C3360 R3367
PC_GP 002
B_DDR_DQ3 005 A_DDR_A13 A_DDR_A0 A_DDR_A10 HP_PLUG SP_MUTE PC_GREEN
AC_DET_CPU 0.01u 68
A_DDR_DQS1P A_DDR_A3 A_DDR_WE#
2
005 D3327 PC_SOG C3356
B_DDR_DQ4 R3372
005 QZ Not use SRS 1SS226
3
A_DDR_DQS1N 1500P 0
005 R3362
F B_DDR_DQ5 N1 Use SRS NC NC NC NC PC_BP C3357 002
PC_BLUE
1
005 0.01u 68
005 A_DDR_DQS2P
B_DDR_DQ6 P1 P2 P3 P4 P5 P6 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 P21 P28 P29 P30 P31 P32 PC_VGACOM C3358 R3363 002
005 A_DDR_A9 A_DDR_A7 A_DDR_BA1 DVB_SPI_CLK1 PC_RGB_COM
A_DDR_DQS2N 0.01u 100
005 A_DDR_RESET A_DDR_A2 A_DDR_A12 PC_HSYNC 002
B_DDR_DQ7 005 PC_HSYNC
005 A_DDR_DQS3P
B_DDR_DQ8 PC_VSYNC 002
005 NC NC NC NC PC_VSYNC
005 A_DDR_DQS3N
B_DDR_DQ9 R3 R4 R5 R11 R12 R13 R14 R15 R16 R17 R18 R19 R20 R21 R26 R27 R28 R29 R31 R32
005 A_DDR_A5 A_DDR_A11
B_DDR_DQ10 005 A_DDR_BA0
A_DDR_DQ0
005
B_DDR_DQ11 005
A_DDR_DQ1 NC NC NC
005
B_DDR_DQ12 005
A_DDR_DQ2 T1 T2 T3 T4 T5 T6 T11 T12 T13 T14 T15 T16 T17 T18 T19 T20 T21 T27 T28 T29
005 A_DDR_CS0# A_DDR_BA2 A_DDR_A6
B_DDR_DQ13 005
A_DDR_DQ3 A_DDR_RAS# A_DDR_A8
005
B_DDR_DQ14 005
A_DDR_DQ4 A_DDR_DQ6 A_DDR_A1 DEMOD_RST
005 A_DDR_DQ4 A_DDR_A4 RVREF5 NC DEMOD_TSDATA0 DEMOD_TSCLK
B_DDR_DQ15 005
A_DDR_DQ5 U1 U2 U3 U4 U5 U7 U11 U12 U13 U14 U15 U16 U17 U18 U19 U20 U21 U22 U28 U29 U30 U31 U32
005 NC
A_DDR_DQ6
005
A_DDR_DQ7 C3330 CPU_AOSDATA0
A_DDR_DQ0 DEMOD_TSVAL CPU_OS_DAT2
005 A_DDR_DQ2 0.01u CPU_ALIN CPU_AOSDATA1 DEMOD_TSSYNC CPU_OS_CLK2
A_DDR_DQ8
V1 V2 V11 V12 V13 V14 V15 V16 V17 V18 V19 V20 V21 V22 V26 V27 V28 V29 V30 V31 V32
TO MAIN6(FLASH) 005 D3304
A_DDR_DQ9 COMP_Y1P C3366 R3383 002
2
1SS226 COMP1_Y
006 005 0.01u
68
E FLASH_CE0# A_DDR_DQ10
3
C3367 R3384
005 NC COMP_SOY1 002
A_DDR_DQM1 A_DDR_DQ13 DSUB_WP COMP1_SOY
1
A_DDR_DQ11 1500P
006 W1 W3 W4 W5 W11 W12 W13 W14 W15 W16 W17 W18 W19 W20 W21 W22 W23 W29 W30 0
NAND_CE1# 005 C3368
A_DDR_DQ12 COMP_PB1P R3376 002
2
006 D3324 COMP1_Pb
NAND_RB# 005 0.01u
1SS226 68
3
A_DDR_DQ13
006 COMP_PR1P C3369 R3377 002
NAND_ALE CPU_AOSDATA3 CPU_AOLRCK CPU_AOMCLK
1
005 A_DDR_DQS0P A_DDR_DQ11 COMP1_Pr
A_DDR_DQ14 A_DDR_DQS0N A_DDR_DQM0 A_DDR_DQ15 CPU_AOSDATA4 CPU_AOSDATA2 CPU_AOBCK 0.01u
006 68
NAND_CLE 005 Y1 Y2 Y3 Y4 Y6 Y11 Y12 Y13 Y14 Y15 Y16 Y17 Y18 Y19 Y20 Y21 Y22 Y27 Y28 Y29 Y30 Y31 Y32 D3307
A_DDR_DQ15 C3370 R3378
2
1SS226 COMP_COM1 002
006 COMP1_COM
NAND_WE# 005 0.01u
3
A_DDR_DQ16 100
006
NAND_OE#
1
005 A_DDR_DQ14
A_DDR_DQ17 CPU_OPWM2 CPU_OS_DAT0 CPU_ASPDIF
A_DDR_DQ12 A_DDR_DQ9 CPU_OPWM0 LAN_LED1 CPU_OS_CLK0
006 005 AA3 AA4 AA5 AA11 AA12 AA13 AA14 AA15 AA16 AA17 AA18 AA19 AA20 AA21 AA22 AA26 AA27 AA28 AA29 AA30 AA31 AA32
2
NAND_D0 A_DDR_DQ18 D3325
1SS226
3
006 005
NAND_D1 A_DDR_DQ19
1
006 005 R3347 R3349
NAND_D2 A_DDR_DQ20 A_DDR_DQS1P A_DDR_DQ10
A_DDR_DQS1N A_DDR_DQ1 A_DDR_DQ8 LAN_LED0 CPU_SY1 TP3321
006 005 F 12K F
12K
NAND_D3 A_DDR_DQ21 AB1 AB2 AB3 AB4 AB5 AB6 AB11 AB12 AB13 AB14 AB15 AB16 AB17 AB18 AB19 AB20 AB21 AB22 AB28 AB29 AB30 CPU_SC1 TP3322
006 005 CPU_OS_DAT1
NAND_D4 A_DDR_DQ22 CPU_OS_CLK1 C3373 R3414
CPU_CVBS0P R3379 001
006 005 TUNER_CVBS
NAND_D5 A_DDR_DQ23 0.047u 100 0
A_DDR_DQ7
006 005 A_DDR_DQ3 A_DDR_DQ5 CPU_U1TX CPU_U1RX CPU_OPWM1 R3415
CPU_CVBS1P C3374 R3380 002
NAND_D6 A_DDR_DQ24 CVBS1_IN
AC1 AC2 AC3 AC4 AC12 AC13 AC15 AC17 AC19 AC20 AC21 AC27 AC28 AC29 AC30 AC31 AC32
D3306 0.047u 100 0
006 005
NAND_D7 A_DDR_DQ25 EXA697WJQZ
CPU_CVBS2P C3388 R3311 R3330 002
005 5.6V
D A_DDR_DQ26
005 CPU_GPIO7 CPU_GPIO8 CPU_DATMDI_RJ45_TN
CPU_DATMDI_RJ45_TP
D3330
EXA697WJQZ
0.047u 100 0
SC/Y_CVBS2_IN
A_DDR_DQ27
AD3 AD4 AD5 5.6V
AD26 AD27 AD28 AD30 AD31 AD32
TO MAIN12(LAN_USB) 005
A_DDR_DQ28
CPU_CVBSCOM 002
012 005 CVBS_COM
USB_D0P A_DDR_DQ29 C3359
012 005 A_DDR_MCLK0P_621MHz 1u
USB_D0N A_DDR_DQ30 A_DDR_MCLK0N_621MHz CPU_DATMDI_RJ45_RN CPU_DATMDI_RJ45_RP CPU_BYPASS0 TP3324
012 005 AE1 AE2 AE4 AE9 AE10 AE14 AE25 AE26 AE27 AE30 AE31 AE32
USB_D1P A_DDR_DQ31 CPU_BYPASS1 TP3325
OPCTRL0 C3355
012
USB_D1N 0.01u
CPU_VDAC2_OUT TP3327
NC NC
*C3392 0.1u
TO MAIN3(HDMI) AF1 AF2 AF3 AF8 AF9 AF10 AF12 AF13 AF14 AF16 AF17 AF18 AF19 AF20 AF22 AF23 AF25 AF26 AF27 AF28 AF29 AF30 AF31 AF32 CPU_SIF
CPU_SIF_COM C3393
003 OPCTRL6 OPWRSB CPU_VGA_SCL KEY1_CPU KEY2_CPU QSTEMP_CPU CPU_SIF
SW_TMDS_D0P R3354 0 0.1u
003
SW_TMDS_D0N CPU_ADACL2
PM_REQ NC CPU_ADACR2 NC NC
003
330
SW_TMDS_D1P AG1 AG2 AG3 AG4 AG5 AG8 AG10 AG12 AG13 AG14 AG16 AG17 AG19 AG20 AG23 AG26 AG27 AG28 AG29 AG30 AG31 AG32
003
R3434
SW_TMDS_D1N OPCTRL1 CPU_VGA_SDA SLOWSW2 SLOWSW1 CPU_SIF_COM COMP1_AINL1 002
R3387 *C3378
R3353
COMP1_IN_L
003 D3310 30K 10u 16V
SW_TMDS_D2P EXA713WJQZ
1K
EJTAG_TDI COMP1_AINR1 R3388 *C3379 002
EJTAG_TDO NC EJTAG_TMS CPU_ADACL3 12V COMP1_IN_R
003
1K
D3311 30K 10u 16V
*R3350
0
SW_TMDS_D2N
0
AH1 AH2 AH3 AH4 AH6 AH7 AH8 AH10 AH12 AH13 AH14 AH16 AH17 AH20 AH23 AH24 AH26 AH27 AH28 AH29 AH30 EXA713WJQZ
C3387 CVBS1_AINL2 R3389 *C3380 002
R3435
003 F 12V CVBS1_IN_L
R3417
SW_TMDS_CLKP_222.75MHz I2C_READY R3333 ANT+5V_SW_CPU HP_MUTE CPU_U0TX OPC_CPU R3418 0 0.01u D3312 30K 10u 16V
5.1K R3339 C3351
C SW_TMDS_CLKN_222.75MHz
003 0
C3349
1u *C3353
2.2u
C3354
1u
CVBS1_AINR2
EXA713WJQZ
12V
D3313
R3390
30K
*C3381
10u 16V
002
CVBS1_IN_R
EJTAG_TRST# NC ORESET# NC 1u HP_MON_L EXA713WJQZ
TP3301 HDMI_CEC_CPU NAND_WE# NAND_D5 SMPOWHOLD HDMI_CEC_CPU C3386 CPU_BYPASS1 CPU_CVBS1P NC CPU_ADACR3 HP_MON_R CVBS2_AINL3 002
12V R3391 *C3382
C3339 CVBS_IN2_L
AJ3 AJ4 AJ5 AJ6 AJ8 AJ9 AJ10 AJ11 AJ12 AJ13 AJ17 AJ18 0.01u AJ20 AJ21 AJ22 AJ23 AJ24 AJ25 AJ26 AJ27 AJ28 AJ29 AJ30 AJ31 AJ32 D3314 30K 10u 16V
TO MAIN12(LAN_USB) 4.7u EXA713WJQZ
012 N_USB_RST 10V NC CVBS2_AINR3 12V R3392 *C3383 002
N_USB_RST DET_PNL_12V_CPU POW_SW_CPU OPCTRL5 CPU_U0RX COMP_COM1 COMP_PR1P CPU_BYPASS0 CVBS_IN2_R
KZA761WJQZ PC_HDMI_AINR4 D3315 30K 10u 16V
EXA713WJQZ
TO MAIN6(FLASH) NAND_CLE
PC_HDMI_AINL4 12V R3393 *C3384 002
PC_HDMI_L
006 NAND_ALE NAND_OE# NAND_D4 NAND_D6 N_USB_RST N_KEY_RST_CPU NC NC CPU_CVBSCOM COMP1_AINL1 CVBS2_AINR3 COMP1_AINR1 D3316 30K 10u 16V
SMPOWHOLD EXA713WJQZ
AK1 AK2 AK3 AK4 AK5 AK6 AK7 AK8 AK9 AK10 AK11 AK12 AK13 AK14 AK15 AK16 AK17 AK18 AK19 AK20 AK21 AK22 AK23 AK24 AK25 AK26 AK27 AK28 AK29 AK30 AK31 AK32 PC_HDMI_AINR4 12V R3394 *C3385 002
PC_HDMI_R
D3317 30K 10u 16V
TO MAIN7(UCOM) PNL_WP PNL_EN PNL_I2C_EN OPCTRL4 PC_BP PC_SOG PC_GP COMP_PB1P CPU_VDAC2_OUT CPU_CVBS2P EXA713WJQZ
007 SMPOWHOLD CPU_CVBS0P 12V
SMPOWHOLD
TP3358
NAND_D0 SW_TMDS_CLKP_222.75MHz ATV_AINL5
NC NC CVBS2_AINL3 ATV_AINL5 CVBS1_AINL2 ATV_AINR5 CVBS1_AINR2
FLASH_CE0# NAND_D2 NAND_D7 USB_D1P USB_D0P SW_TMDS_D0P SW_TMDS_D2P ATV_AINR5
TP3359
F
007 PM_REQ AL1 AL2 AL3 AL5 AL6 AL7 AL9 AL10 AL11 AL12 AL13 AL15 AL16 AL18 AL19 AL21 AL22 AL24 AL26 AL27 AL29 AL30 AL31 AL32
PM_REQ CPU_AINL6 TP3319
SW_TMDS_D1P PC_HSYNC PC_VGACOM COMP_SOY1 CPU_SC1 CPU_ATV_IF-
TP3302 TO_MAIN9(AUDIO_AMP)
560
N_KEY_RST_CPU CPU_AINR6 TP3320 *FB3305
A022WJ
CPU_AOMCLK *R3358 009
R3343
NAND_D1 SW_TMDS_CLKN_222.75MHz SP_MCLK
NAND_RB# NAND_D3 NAND_CE1# USB_D1N USB_D0N SW_TMDS_D0N SW_TMDS_D2N NC NC NC PC_HDMI_AINL4 CPU_AINL6 NC CPU_AINR6 NC 100
AM1 AM2 AM3 AM5 AM6 AM7 AM9 AM10 AM11 AM12 AM13 AM15 AM16 AM18 AM19 AM21 AM22 AM24 AM26 AM27 AM29 AM30 AM31 AM32 CPU_AOLRCK R3359 009
SP_LRCLK
47 FB3304
SW_TMDS_D1N PC_VSYNC PC_RP COMP_Y1P CPU_SY1 CPU_ATV_IF+ 1043CE
CPU_AOBCK R3360 009
SP_BCLK
220
CPU_AOSDATA0 R3361 009
SP_DATA
47
CPU_AOSDATA1 TP3330
B CPU_AOSDATA2 TP3331
CPU_AOSDATA3 TP3332
CPU_AOSDATA4 TP3333
TO_MAIN9(AUDIO_AMP)
NC
2.2K
OPWRSB
1K
SLOWSW1
SLOWSW2
PNL_WP
DSUB_WP
PNL_EN
PNL_POW
OPC_CPU
HP_MUTE
SP_MUTE
ORESET#
HP_PLUG
OPCTRL4
OPCTRL5
OPCTRL0
OPCTRL1
UCOM_RST
UCOM_MODE
STB_CPU
CPU_LED
OPCTRL6
S1_PLUG
CPU_OPWM1
CPU_OPWM2
CPU_OPWM0
CPU_GCK5
CPU_U1RX
CPU_U0RX
CPU_U2RX
1M
CPU_U1TX
POW_SW_CPU
KEY1_CPU
KEY2_CPU
CPU_U0TX
CPU_U2TX
SB1FF HP_MON_R R3406 C3389 009
N_TUN_RST
QSTEMP_CPU
COMP1_PLUG
COMP2_PLUG
CPU_GPIO7
CPU_GPIO8
AC_DET_CPU
CVBS1_PLUG
CVBS2_PLUG
I2C_READY
AMP_PROTECT
CPU_VGA_SDA
CPU_GPIO13
CPU_VGA_SCL
HP_MONITOR_R
CPU_OS_DAT0
CPU_OS_DAT1
TUN_GAIN_SW
CPU_OS_CLK0
CPU_OS_CLK1
LAMP_ERR_CPU
PNL_I2C_EN
ANT+5V_SW_CPU
22K 1u 10V
N_TUN_SAT_RST
4.7K
4.7K
R3351
N_CPU_USB1_FLG
DET_PNL_12V_CPU
R3306
2 4 6 8 10
R3345
EJTAG_TRST# X3301
R3320
R3323
10
NC
SCA237WJQZ
47
10
R3335
10
47
47
10
10K
4 NC 3
10
10
47
4.7K
4.7K
R3338
EJTAG_TDI
10
10
10
CPU_ADACL2 TP3334
R3433
R3340
10K
10K
10K
*R3310
R3321
R3324
R3337
R3436
*R3309
10K
TP3307
TP3311
TP3312
TP3357
TP3315
TP3316
10
R3325
R3313
R3314
CPU_ADACR2
10K
10K
TP3335
R3409
R3410
EJTAG_TDO
47
1 NC 2
R3421
R3348
C3350 C3352 CPU_ADACL3 TP3336
R3316
R3318
R3341
R3411
R3420
7P 27MHz
R3419
EJTAG_TMS
7P CPU_ADACR3 TP3337
50V D3303
50V
PXA018WJ
006
006
006
006
006
006
006
006
006
002
002
002
002
002
002
002
009
009
009
009
008
008
008
008
008
010
010
010
010
010
001
001
007
007
007
012
CPU_ASPDIF R3368 002
OPT_OUT
CPU_ALIN 47
TP3338
TP3308
TP3354
TO_MAIN3(HDMI)
TP3328
TP3326
CONFIG PIN
TP3314
TP3329
TP3345
TP3346
TP3347
TP3348
TP3350
TP3351
TP3352
TP3353
R3369 003
TO MAIN6(FLASH)
HDMI_OPT_OUT
47
TO MAIN9(AUDIO AMP)
TO MAIN12(LAN_USB)
TO MAIN2(TERMINAL)
TO_MAIN6(FLASH)
TO MAIN10(POWER)
A
TO MAIN7(UCOM)
R3398 006
CPU_UARXD1_UCOM
TO MAIN1(TUNER)
CPU_UATXD1_UCOM
TO MAIN8(PANEL)
TO MAIN6(FLASH)
CPU_A_SPDIF
N_CPU_USB1_FLG
47
CPU_UARXD0_RS
CPU_UATXD0_RS
AMP_PROTECT
TUN_GAIN_SW
COMP1_PLUG
UCOM_MODE
CVBS1_PLUG
CVBS2_PLUG
PANEL_OFL1
PNL_I2C_EN
PNL_I2C_EN
DUNTKF733WE19/DUNTKF733WE17
N_CPU_RST
N_PER_RST
N_TUN_RST
UCOM_RST
I2C_READY
SDA0_400k
SCL0_400k
SLOWSW1
DSUB_WP
PNL_POW
HP_MUTE
SP_MUTE
HP_PLUG
STB_CPU
S1_PLUG
PNL_WP
AC_DET
PNL_EN
SDA1
SCL1
OFL1
OFL2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2–5
LC-60LE632U/LC-70LE732U
MAIN Unit-5
MAIN5 (DDR)
DUNTKF733WE19/DUNTKF733WE17
J
TO MAIN4(CPU)
A_DDR_DQ8 004
A_DDR_DQ8
A_DDR_DQ9 004
A_DDR_DQ9
A_DDR_DQ10 004
A_DDR_DQ10
A_DDR_DQ11 004
A_DDR_DQ11
A_DDR_DQ14 004
A_DDR_DQ14
004 B_DDR_DQ12
B_DDR_DQ12
004 B_DDR_DQ13
B_DDR_DQ13
004 B_DDR_DQ14
B_DDR_DQ14
H B_DDR_DQ15
004 B_DDR_DQ15
004
A_DDR_CS0#
004
004 B_DDR_DQS1P A_DDR_RAS#
B_DDR_DQS1P
004
004 B_DDR_DQS1N A_DDR_CAS#
B_DDR_DQS1N
004
004 B_DDR_DQM1 A_DDR_WE#
B_DDR_DQM1
004
A_DDR_ODT
004
A_DDR_CLKEN
004 004
B_DDR_CS0# A_DDR_BA0
R3513 004
004 A_DDR_BA1
B_DDR_RAS# 47
1_RAS#_HSS A_DDR_RAS#
004
004 A_DDR_BA2
B_DDR_CAS# R3514
47
004 1_CS0#_HSS A_DDR_CS0#
B_DDR_WE#
R3515
004 FL3508 FL3505 FL3502
B_DDR_ODT 47
NA119WJ NA119WJ NA119WJ 1_BA2_HSS A_DDR_BA2
R3527
47
A_DDR_RAS#
A_DDR_DQ13 A_DDR_DQ15 A_DDR_DQ12
1_A5
7 8
A_DDR_A5 004
A_DDR_A3
B_DDR_CS0# 3_CS0#_HSS
1_A2
47 A_DDR_A2 004
2_CS0#_HSS A_DDR_CS0# A_DDR_A4
R3540
47
A1 A2 A3
A A7 A8 A9 A1 A2 A3
A A7 A8 A9 A1 A2 A3
A A7 A8 A9 5 6
B_DDR_BA0 3_BA0_HSS VDDQ DQU5 DQU7 DQU4 VDDQ VSS VDDQ DQU5 DQU7 DQU4 VDDQ VSS R3528 VDDQ DQU5 DQU7 DQU4 VDDQ VSS 1_A7 A_DDR_A7 004
3 4 A_DDR_A5
47
2_BA2_HSS A_DDR_BA2
R3541 B_DDR_DQ14 A_DDR_DQ30 1_A9
B_DDR_DQS1N A_DDR_DQS3N A_DDR_DQS1N A_DDR_DQ14 A_DDR_A9 004
47 R3529 1 2 A_DDR_A6
B_DDR_RESET 3_RESET_HSS
47
R3533 B1 B2 B3 B B7 B8 B9
C3512
B1 B2 B3 B B7 B8 B9 2_BA0_HSS A_DDR_BA0
C3503
B1 B2 B3 B B7 B8 B9
R3508
004
A_DDR_A7
47 VSSQ VDD VSS #DQSU DQU6 VSSQ VSSQ VDD VSS #DQSU DQU6 VSSQ VSSQ VDD VSS #DQSU DQU6 VSSQ
C3522 KZA837WJQZ KZA837WJQZ 47 004
004 B_DDR_A7 3_A7 R3523 A_DDR_A8
B_DDR_A0 KZA837WJQZ B_DDR_DQ10 10u 16V A_DDR_DQ25 A_DDR_DQ26 10u 16V A_DDR_DQ9 A_DDR_DQ10
7 8 B_DDR_DQ11 B_DDR_DQ9 A_DDR_DQ27 A_DDR_DQ11 1_RESET_HSS A_DDR_RESET
B_DDR_DQS1P A_DDR_DQS3P 47 A_DDR_DQS1P
004 10u 7 8 004
B_DDR_A2 3_A2 A_DDR_A9
B_DDR_A1 16V 2_A5
5 6 C1 C2 C3 C C7 C8 C9 C1 C2 C3 C C7 C8 C9 7 8
A_DDR_A5
C1 C2 C3 C C7 C8 C9 1_A13
5 6
A_DDR_A13
004
004 B_DDR_A5 3_A5 VDDQ DQU3 DQU1 DQSU DQU2 VDDQ VDDQ DQU3 DQU1 DQSU DQU2 VDDQ VDDQ DQU3 DQU1 DQSU DQU2 VDDQ A_DDR_A10
B_DDR_A2 2_A2 A_DDR_A2
3 4 1_A3 A_DDR_A3
5 6 4 004
004 A_DDR_DQM1 A_DDR_DQ8 3
B_DDR_A3 B_DDR_A3 3_A3 A_DDR_A11
B_DDR_DQM1 B_DDR_DQ8 A_DDR_DQM3 A_DDR_DQ24 2_A7 A_DDR_A7
1 2 1_A0 A_DDR_A0
C3525 C3516 3 4 2 004
C3506 1
B_DDR_A4
004
R3534
D1 D2 D3 D D7 D8 D9 KZA837WJQZ
10u
D1 D2 D3 D D7 D8 D9 KZA837WJQZ
10u 2_A9 A_DDR_A9 D1 D2 D3 D D7 D8 D9 KZA837WJQZ
10u
A_DDR_A12
VSSQ VDDQ DMU DQU0 VSSQ VDD VSSQ VDDQ DMU DQU0 VSSQ VDD 1 2 VSSQ VDDQ DMU DQU0 VSSQ VDD 004
004 16V 16V R3509
47 16V A_DDR_A13
B_DDR_A5 47
B_DDR_BA2 3_BA2_HSS B_DDR_DQ0 B_DDR_DQM0 A_DDR_DQ16 A_DDR_DQM2 R3524 A_DDR_DQ0 A_DDR_DQM0
004
004 1_WE#_HSS A_DDR_WE# A_DDR_RESET
B_DDR_A6 7 8 47
004
B_DDR_A0 3_A0 E1 E2 E3 E E7 E8 E9 E1 E2 E3 E E7 E8 E9 2_RESET_HSS A_DDR_RESET E1 E2 E3 E E7 E8 E9
1_ODT_HSS
7 8
A_DDR_ODT
B_DDR_A7 5 6
VSS VSSQ DQL0 DML VSSQ VDDQ VSS VSSQ DQL0 DML VSSQ VDDQ FL3506 7 8 VSS VSSQ DQL0 DML VSSQ VDDQ 6
5
B_DDR_A13 3_A13 NA119WJ
004 2_A13 A_DDR_A13
B_DDR_A8 3 4 1_CAS#_HSS A_DDR_CAS#
B_DDR_DQ2 A_DDR_DQ19 5 6
B_DDR_DQS0P B_DDR_DQ1 B_DDR_DQ3 A_DDR_DQ18 A_DDR_DQS2P A_DDR_DQ17 A_DDR_DQ2 A_DDR_DQS0P A_DDR_DQ1 A_DDR_DQ3 3 4
F B_DDR_A9
004
B_DDR_A9
1 2
3_A9
C3519
0.1u K F1 F2 F3
B_DDR_DQS0N
F F7 F8 F9
FL3509
NA119WJ C3510
F1 F2 F3 F F7 F8 F9
2_A3
3 4
A_DDR_A3
C3501 F1 F2 F3 F F7 F8 F9
FL3503
NA119WJ
1_A10
1 2
A_DDR_A10
2_WE#_HSS
1_WE#_HSS
0.1u K R3547
7 8 1K F 47
2_CS0#_HSS
1_CS0#_HSS
3_A10 R3546 10V 1K F 2_A10 R3520 R3503
1_A10
B_DDR_A6 3_A6 3_CS0#_HSS 3_WE#_HSS 240 F 240 F 240 F
2_A8 A_DDR_A8
5 6 8 7 C3508
B_DDR_A8 3_A8 VSS BA0 BA2 NC VREFCA VSS VSS BA0 BA2 NC VREFCA VSS C3517 VSS BA0 BA2 NC VREFCA VSS
2_A6 A_DDR_A6 0.1u K R3504
3 4
M1 M2 M3 M M7 M8 M9 M1 M2 M3 M M7 M8 M9 0.1u K 6 5 M1 M2 M3 M M7 M8 M9 10V 1K F
B_DDR_A11 3_A11 10V 2_A4 A_DDR_A4
1 2 4 3
3_BA0_HSS 3_BA2_HSS 2_BA0_HSS 2_BA2_HSS 1_BA0_HSS 1_BA2_HSS
2_A1 A_DDR_A1
R3548 2 1
VDD A3 A0 A12(#BC) BA1 VDD VDD A3 A0 A12(#BC) BA1 VDD C3518 VDD A3 A0 A12(#BC) BA1 VDD C3509 R3505
1K F
N1 N2 N3 N N7 N8 N9 N1 N2 N3 N N7 N8 N9
0.1u
10V
K
N1 N2 N3 N N7 N8 N9 0.1u
10V
K 1K F
1_BA1_HSS
2_BA1_HSS
R3522
3_A3 3_A0 3_A12 2_A3 2_A0 2_A12 1K F 1_A3 1_A0 1_A12
3_BA1_HSS C3527
0.1u K
VSS A5 A2 A1 A4 VSS 10V VSS A5 A2 A1 A4 VSS VSS A5 A2 A1 A4 VSS
P1 P2 P3 P P7 P8 P9 P1 P2 P3 P P7 P8 P9 P1 P2 P3 P P7 P8 P9
3_A5 3_A2 3_A1 3_A4 2_A5 2_A2 2_A1 2_A4 1_A5 1_A2 1_A1 1_A4
C3521 VDD A7 A9 A11 A6 VDD VDD A7 A9 A11 A6 VDD VDD A7 A9 A11 A6 VDD
0.1u K R1 R2 R3 R R7 R8 R9 R1 R2 R3 R R7 R8 R9 R1 R2 R3 R R7 R8 R9
10V
1_A11
3_A7 3_A9 3_A11 3_A6 2_A7 2_A9 2_A11 2_A6 1_A7 1_A9 1_A6
C3524
0.1u K C3513 C3504 C3507
VSS #RESET A13(NC) NC A8 VSS 0.1u K VSS #RESET A13(NC) NC A8 VSS C3515 0.1u K VSS #RESET A13(NC) NC A8 VSS
10V 0.1u K
T1 T2 T3 T T7 T8 T9
10V
T1 T2 T3 T T7 T8 T9
0.1u
10V
K 10V
T1 T2 T3 T T7 T8 T9 10V
D 3_RESET_HSS 3_A13
R3545
3_A8 2_RESET_HSS 2_A13
R3519
2_A8 1_RESET_HSS 1_A13 1_A8
100 100
R3542
0 R3512
B_DDR_MCLK0P_621MHz B_DDR_CLK0P_621MHz 100 A_DDR_CLK0N_621MHz A_DDR_MCLK0N_621MHz
004 004
B_DDR_MCLK0P_621MHz 1 2 4 3 A_DDR_MCLK0N_621MHz
R3506
0
TO MAIN4(CPU)
A_DDR_CLK1N_621MHz A_DDR_MCLK1N_621MHz 004
4 3 A_DDR_MCLK1N_621MHz
R3532
0
IC3502 IC3501
C IC3503 Hynix
IXD226WJQZ Hynix
IXD226WJQZ Hynix IXD226WJQZ
DDR3 #3 DDR3 #3
DDR3 #3 A_DDR_DQ16 004
1Gbit, 1333Mbps (9-9-9) 1Gbit, 1333Mbps (9-9-9) A_DDR_DQ16
1Gbit, 1333Mbps (9-9-9) A_DDR_DQ17 004
A_DDR_DQ17
A_DDR_DQ18 004
A_DDR_DQ18
A_DDR_DQ19 004
A_DDR_DQ19
A_DDR_DQ20 004
A_DDR_DQ20
A_DDR_DQ21
B-side DDR3 A-side DDR3X2 004
A_DDR_DQ21
A_DDR_DQ22 004
A_DDR_DQ22
A_DDR_DQ23 004
A_DDR_DQ23
A_DDR_DQS2P 004
A_DDR_DQS2P
A_DDR_DQS2N 004
A_DDR_DQS2N
A_DDR_DQM2 004
A_DDR_DQM2
B A_DDR_DQ24 004
A_DDR_DQ24
A_DDR_DQ25 004
A_DDR_DQ25
A_DDR_DQ26 004
A_DDR_DQ26
A_DDR_DQ27 004
A_DDR_DQ27
A_DDR_DQ28 004
A_DDR_DQ28
A_DDR_DQ29 004
A_DDR_DQ29
A_DDR_DQ30 004
A_DDR_DQ30
A_DDR_DQ31 004
A_DDR_DQ31
A_DDR_DQS3P 004
A_DDR_DQS3P
A_DDR_DQS3N 004
A_DDR_DQS3N
A_DDR_DQM3 004
A_DDR_DQM3
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2–6
LC-60LE632U/LC-70LE732U
010
BU+3.3V
TO_MAIN07(UCOM)
TO MAIN4(CPU)
R8414 1 NC NC 48
004 FLASH_CE0# 4.7K
FLASH_CE0#
2 NC NC 47
004 NAND_CE1#
NAND_CE1#
004 NAND_OE# R8455 3 NC NC 46
NAND_OE# 4.7K
I 004 NAND_D0 4 NC NC 45 TL8477
NAND_D0
NAND_D7
TL8454 TO MAIN4(CPU)
004 NAND_D1 R8415 0.1
NAND_D1 4.7K 5 NC I/O7 44 7 8 004
TL8478 SCL1
004 NAND_D2 TL8455
2.2 NAND_D6
NAND_D2 6 NC I/O6 43 5 6 004
TL8457 R8451 TL8479
004 NAND_D3 SDA1
47 NAND_D5
NAND_D3 NAND_RB# 3.3 0.1
7 R/B# I/O5 42 3 4
004 NAND_D4 TL8480 R8472
NAND_D4 NAND_D4 1K
TO MAIN3(HDMI)
NAND_OE# 0 2.2
004 NAND_D5 8 RE# I/O4 41 1 2 003
NAND_D5 1 2 SCL1
TL8458
004 NAND_D6
NAND_CE1# 3.3 CE# R8458 R8463 C8460
003
9 NC 40 0.1u
NAND_D6 47 0 3 4 SDA1
10V
004 NAND_D7
NAND_D7 10 NC NC 39
004 NAND_ALE
NAND_ALE
004 NAND_CLE
11 NC PRE 38
0 IC8455
NAND_CLE 3.3 3.3
H 12 VCC VCC 37
1 A0 VCC 8 R24064AS R8401
004 NAND_RB# 3.3 1K
NAND_RB#
0 0 3.3
004 NAND_WE# 13 VSS VSS 36 WP 1 2
2 A1 7
NAND_WE# R8453
C8456 0 TO MAIN4(CPU)
4.7K C8455 R8462 0 3 4
14 NC NC 35 0.1u TL8451
0.1u 0 3 A2 SCL 6 004
NC 1 2 SCL0_400k
15 NC 34 TL8452
0 3.1
TL8459 R8459
NAND_CLE 0.1 004
CLE 47 4 GND SDA 5 3 4 SDA0_400k
16 NC 33
TL8481
TL8460 3.1
NAND_ALE 0.1 2.2 NAND_D3
17 ALE I/O3 32 7 8
TL8482 R8480 TO MAIN8(PANEL)
TL8476 10
NAND_WE# 3.2 2.2 NAND_D2 008
18 WE# I/O2 31 5 6 SCL0_400k
004
CPU_A_SPDIF 3.3 0 NAND_D1 008
19 WP# I/O1 30 3 4 SDA0_400k
R8487
1K NAND_D0
0 2
20 NC I/O0 29 1
G 004
SMPOWHOLD *IC8401 21 NC NC 28
TL8483
004 FLASH 22 NC NC 27
N_CPU_RST
IXD287WJQZ
23 NC NC 26
2Gbit
24 NC NC 25
TO MAIN07(UCOM)
F
007
N_SRESET
3
007 D8457 4.7K
CPU_TXD_UCOM 3.3K
C8471
0.01u 1SS184
007 3.0
CPU_RXD_UCOM
2
1
3.3 3
007 Vcc
3.3
5
1
RC 2
C8469
0.1u IC8454 R8479
47K
R8477
4.7K
10V
AHC1G08W C8470
0.01u
TO MAIN2(TERMINAL)
002
UART_232CTOCPU
002
UART_CPUTO232C
R8420
100
C R8467 R8468
4.7K 4.7K
3.08 3.4
1 SELECT Vcc 16
C8458
0.1u
10V K
3.36 0
2 1A /ST 15
3.3 3.34 0
3.3 3 1B 4A 14
1 G1 Vcc 8
3.3 3.3
2 A1 G2 7 3.37 0
C8457 4 1Y 4B 13
0.1u 3.3 3.0
10V 3 Y2 Y1 6
B R8454 0 3.3 3.37
4.7K 4 GND A2 5 5 2A 4Y 12
R8452
4.7K
3.3 0
IC8451 6 2B 3A 11
7WH126FU
BUFFER 3.3
10
0
7 2Y 3B
TO MAIN4(CPU)
004
CPU_UARXD0_RS
004
0
CPU_UATXD0_RS 8 GND 3Y 9
004
CPU_UARXD1_UCOM
CPU_UATXD1_UCOM
004 IC8452
LCX157FT
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2–7
LC-60LE632U/LC-70LE732U
010 BU+5V
010 BU+3.3V
C2021
*C2006 0.1u
R2059
10u IC2005
2
10K
0
16V
KZA837WJQZ
SB1FF R24002AS
EEPROM
I
*R2005
R2043 3.3 0.0
R2036
8 VCC A0 1
4.7K
10K
1
3.3 0.0
7 WP A1 2
3.3 0.0
6 SCL A2 3
RC 1 2
3.3 0.0
R2037 3 4 5 SDA GND 4
10
R2019
10
R2027
PM_REQ
2.7K
CEC_0_IN
CPU_RXD_UCOM
CPU_TXD_UCOM
DET_PNL_12V
H
TO MAIN6(FLASH)
CPU_RXD_UCOM 006
CPU_RXD_UCOM
R2016 R2070
3
CPU_TXD_UCOM 006
100 10K CPU_TXD_UCOM
POW_SW R2044
10
C2002
R2049
P2001
RC TO MAIN4(CPU)
4.7K
0.1u C2005
NA335WJ
10V 100P PM_REQ 004
4
R2040 PM_REQ
TP2001
R2052
220
1
100K
13V/NC
TO MAIN10(POWER)
GND/NC 2 R2011 R2012 LAMP_ERR 010
33K 33K LAMP_ERR
LR_PULSE/NC 3 NC NC NC NC
R2066 100
AC_DET_UCOM_
R2055
010
G 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 AC_DET
27K
BU+3.3V 4 KEY2_ 1K R2014
FB2007
A192WJ RC R2062 10K
RC
R/C 5 KEY1_ 1K R2015 VHD
RS_ON
PM_REQ
CEC_I
MSENS_D
RXD_CPU
TXD_CPU
W_PROT_M
MSENS_ON
CEC_I2
FB2005 KEY1_
I2C_SCL
I2C_SDA
49 KEY1 DET_13V 32 D2004
DET_PNL12V
A074WJ R2031
DET_ERROR_3D
BU+5V/OPC+3.3V 6 10K DA1010
FB2003 R2025 1K KEY2_ 3.3 0 010
A192WJ C2007 50 KEY2 SMPOW 31
OPC C2001 C2003 PS_ON
OPC 7 1000P 1000P 100P
FB2006 NC Q2007
A074WJ 51 QSTEMP DPOW 30
LED+5V/LED_OPC 8 C2004 0 RT1N141C
AV_LINK_I
R2026 100P TH2001 OPC ILL_LED1_STBY_USE
47K 52 OPC LED_ILL 29
M1103J15
KEY_SCL/LED_YOYAKU 9
DET_D3V3
*R2003 NC AC_DET_UCOM_
53 AFT AC_DET 28
0
GND/LED_POWG 10 R2054
FB2010 10 CEC_0_OUT D2005
A192WJ NC 54 ANT_POW CEC_O 27
KEY_SDA/LED_POWR 11 1SS184
R2032 10K NC TO MAIN4(CPU)
55 LNB_SHORT CEC_O2 26 004
12 2 SMPOWHOLD
F GND
FB2002 NC
NC LNB_CNT AV_LINK_O TO MAIN6(FLASH)
REQ/NC/STBY_POW 13
A192WJ
R2009
56
IC2001 25 3
006
22K VSYNC 1 EXT_SMPOWHOLD
FB2009 DBGP_RXD IXD241WJQZ VSYNC
A042WJ 57 24
KEY_POW/NC/KEY2 14 R2008
FB2023 22K MUTE_A_ALL N_SRESET 006
58 DBGP_TXD MUTE_A_ALL 23
A192WJ N_SRESET
GND/NC/KEY1 15
FB2024 NC KUMA_POW LED_3D
NC
A192WJ 59 22
NC NC
60 XCG_ON LED_LOGO 21
NC
EEP_INT STB TO MAIN8(PANEL)
I2C_SDA2
C2022 61 20
SRESET
10u DET_PNL_12V
LAMP_ERR 008
16V NC 62 LR_PULSE ERR_PNL 19 DET_PNL_12V
KZA837WJQZ R2034 VSYNC 008
L/R_REF 10
63 LR_REF IR_PASS 18 VSYNC
TOUCH_RESET
L/R_REF 008
E POW_SW NC
LED_SLEEP
64 POW_SW I2C_SCL2 17 L/R_REF
LED_OPC
XCOUT
RESET
LED_G
LED_R
MODE
VREF
XOUT
XCIN
VCC
VSS
XIN
R2057 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
TC7SH00U TO MAIN10(POWER)
CD NC
NAND GATE
3.3
R2045
R2061 010
C2008 B 2 VON
0
10K
1500P
A B GND
1 3 3.3 3.3 TO MAIN4(CPU)
1 2 3 004
5 Vcc A 1 STB_CPU
OUT VDD VSS
3.3 0 0
1 2 3 TO MAIN3(HDMI)
3.3 3.3 0 003
HDMI_CEC
C2018
R2028 0.1u *Q2010
0
4.7K 2 10V RN4982
TO MAIN4(CPU)
FL2001
C ZA023WJQZ
3
*R2020
004 UCOM_RST 20MHz
C2009
4
0.1u R2030
3.3 0
IR_PASS
004 UCOM_MODE 10V 4.7K
2
5
R2002 Q2002
1K 0 RT1N141C
1
INVERTER
6
C2017
0.1u
10V
*P2007
ILL_LED1_STBY_USE
5.2 NA323WJ
5.2 0 3.3 3.3 0 3.3
8 9 10 11 12 13 14
*FB2017
CI
3Y 3A 30E 4Y 4A 40E Vcc A192WJ
B BUFFER 1 ILL_LED1
IC2003 2 ILL_LED3
LCX125FT
GND 2Y 2A 20E 1Y 1A 10E 3 GND
FB2022
7 6 5 4 3 2 1 A192WJ
CEC_0_IN
R2053
100
CEC_0_OUT
R2060
0
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2–8
LC-60LE632U/LC-70LE732U
MAIN Unit-8
MAIN8 (PANEL)
J
DUNTKF733WE19/DUNTKF733WE17 P2604
WA671WJQZ
FB2615
A192WJ
TO_MAIN4(CPU) 41 GND
004 FB2612 A074WJ
VBO_HTPDN 40 HTPDN
004 FB2613 A074WJ
VBO_LOCKN L2607 39 LOCKN
FA228WJ
I 38 GND
1 2 28 TXC+
L2610 27 GND
G FA228WJ
TO_MAIN10(POWER) 26 GND
010
PNL_12V
4 3 25 TXD-
010
D+3.3V
1 2 24 TXD+
010
PWM2
R2645 0
23 GND
010
GSP_PWM1
22 Reserved
F 21 Reserved
20 NC
TO_MAIN4(CPU) TP2602
004 R2649 0 19
LVDS_SEL NC
PANEL_OFL1
18 NC
004 17 NC
PNL_I2C_EN
16 NC
E IC2601
HC2G66DP R2613 0 15 NC
TO_MAIN6(FLASH) R2620 0 14 NC
006 3.2 3.3 FB2616
SCL0_400k 1 VCC 8 C2602 A192WJ
0.1u 13 GND
006 FB2601
SDA0_400k 10V A042WJ
3.2 3.3 12 ->
OFL1/FRC_RST
2 7
FB2602 A042WJ
11 <->
TCON_SDA
3.3 0 FB2603 A042WJ
3 6 10 <->
D TCON_SCL
TO_MAIN7(UCOM) FB2604 A074WJ
007 9 <-
DET_POW
DET_PNL_12V 0 0
4 GND 5 FB2605 A042WJ
007 8 <-
L/R_REF
L/R_REF
FB2606 A074WJ
007 <-
VSYNC 7 I2C_READY
I2C Bus SW FB2607 A074WJ
6 ->
VCOM_WP
R2635 FB2608 A042WJ
10K 5 <-
GSP/PWM1
FB2609 A042WJ
C TP2601 4 <-
IR_VSYNC
FRAME
FB2610 A074WJ
TO_MAIN4(CPU) 3 PE ->
004 FB2614
I2C_READY A042WJ
2 <-
NC/PWM2
004
PNL_WP FB2611 A074WJ
TP2603 1 ->
ROM_WP
DET_SYNC
Q2603
004 RT1N141U LV TO LCD-CONT
PNL_EN
P2605
B TP2604
R2601 NA905WJ
0 PNL_ROM_EN
PL
FB2618
R2642 R2636 A206WJ
10K 1M 1 PNL+12V
FB2619
A206WJ 2 PNL+12V
FB2620
A206WJ 3 GND
FB2630
A206WJ 4 GND
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2–9
LC-60LE632U/LC-70LE732U
MAIN Unit-9
J MAIN9(AUDIO AMP)
DUNTKF733WE19/DUNTKF733WE17
C2765
1u
10V TO MAIN2(TERMINAL)
TO MAIN4(CPU) R2753
56K
004 002
HP_MONITOR_R MONI_HP_R
004
HP_MONITOR_L R2739 002
C2789 MONI_HP_L
390P 15K
C2702
47P 002
AUDIO_MUTE
I 002
HPOUT_MUTE
12 11 10 9 8 7
IC2704 C2768
1u
AK4201EU 10V
1 2 3 4 5 6
*C2761
C2754
10u
H R2744
47P
*C2759
15K 10u
C2762
C2760 0.1u
0.1u
R2759
C2790 56K
390P
R2816
TO MAIN4(CPU) 22K
004
N_PER_RST
004
AMP_PROTECT
004
HP_MUTE
004
D2711
G SP_MUTE
1SS184 Q2703 C2724
RT1N141U 0.22u
1 25V C2730
L2703
KZA709WJQZ 0.33u
3 C2722 10uH
25V
C2806 0.22u PB106WJ
2 25V TVB
0.22u
25V
KZA709WJQZ
KZA709WJQZ L2701
10uH
D2701
Q2701 PB106WJ
TO MAIN7(UCOM) 1SS184
R2817 RT1N141U
007 0 AUDIO_MUTE
MUTE_AU_ALL 1
3 C2721 C2729
1u
2 1u
*C2712 *C2783 *C2784
25V
10u 25V
10u 10u
F KZA621WJQZ
KZA621WJQZ
N_PER_RST
AMP_MUTE
25V 25V 25V
TO MAIN10(POWER SUPPLY) KZA838WJQZ KZA838WJQZ KZA838WJQZ
010
D+5V
010
D+3.3V
010
AMP+13V 13.3 5.4 5.4 0 5.4 5.4 13.3
32
31
30
29
28
27
26
NC OUTPL OUTML NC
PVDDPL PVSSL PVDDML
13.3 0
AVSS MONO *P2701
25
1
C2715 NA906WJ
E 0.1u 10V R2740
3.3
VREF GAIN1
3.3 0
TL2701
SP
24
TL2709 TL2710 *R2839
C2716 *R2764 0
R2746 0
1u 10V 1 LCH(+)
1.66 0 220K *R2840 TL2702
*R2765 0
REFA
IC2703 GAIN0 0
23
R2771
2 LCH(-)
C2714 TL2703
0.1u VHIYDA164BZ-1Y *R2763 0
47K
1.66 CKMOD
0 3 RCH(-)
DVDD *R2842 TL2704
22
*R2766 0 0
TO MAIN4(CPU) R2731 GND R2751 4 RCH(+)
R2724
0 47K TL2707 TL2708
10
004 AMP_MCLK 1.66 0
SP_MCLK MCK MUTEN 5 NC
21
33
R2732 R2757
R2712 R2721
0 0 47K
004 0 AMP_DATA_LR 1.66 2.4
SP_DATA SDATA PROTN
20
D R2723 R2729 R2749
R2713
0 10K
004 0 0 AMP_BCLK 1.66 3.3
SP_BCLK SCLK SLEEPN
19
R2730 *R2758
R2722
R2711 0 33K
0 0 0
004 AMP_LRCLK 0
SP_LRCLK LRCLK PLIMIT
18
TP2705
0.92 3.3
DVSS HOPP C2733
17
9
R2743 1000P
560K *R2754
PVDDPR PVSSR PVDDMR R2736
22K
10K
NC OUTPR OUTMR NC
10
11
12
13
14
15
16
C 13.3 5.4 5.4 0 5.4 5.4 13.3
C2731
C2720
1u
1u
25V
25V
KZA621WJQZ KZA621WJQZ
L2702
10uH L2704
PB106WJ 10uH
PB106WJ
C2727
0.33u
25V
B TVB
KZA709WJQZ KZA709WJQZ
C2723 C2725
0.22u 0.22u
25V 25V
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2 – 10
LC-60LE632U/LC-70LE732U
MAIN Unit-10
J
MAIN10(POWER) BU3.3V(PS_ON) 1.1V 1.5V,M1.8V 3.3V
DUNTKF733WE19/DUNTKF733WE17
TL9611
3.3 0
R9604 R9606 5 4
C9640 4.7K 10K
2200P
Vo NC
TO MAIN1(TUNER) 50V
001
CZB IC9609
PGND 3 2 1 C9646
D+3.3V RP130N33
1u
001
D+5V D+3.3V 340-1400mA PGND EN 10V
7
6 5 4 CKZ
TL9605 L9604
*C9621 PGND Vin GND Vc
1.8uH PG Q9606
6
D9614
I 10u 16V
KZA837WJQZ
5A,12m DA1010
RN4982 20K 1 2 3
SW GND 10K
C9632 5.2 0
10
5
Q9607 5.2
4700P R9631
C9626 SW 1K HN7G04FUA
SS 1 2 3 4 5 6
11
4
0.1u R9615
25V 4.7 R9624
*C9620 VBST 10K F TL9608
VREG5
KZA620WJ VS
12
3
10u C9633 Q9605
16V Vin 1u 10V R9637 C9642
Vref RT1P141C
13
*C9625
2
KZA837WJQZ KZA531WJQZ 4.7K 1u 10V
10u 25V C9647
Vcc R9625 KZA531WJQZ 1u
Vo
14
1
*C9622 33K F 10V
10u 16V CKZ
KZA837WJQZ
IC9605 R9626
10 J
SN910037 D9609 D9612
*C9613
IC9603 EXA689WJQZ
3.9V
DA1010
TL9604 S132B50M
10u 10V
D+5V 22mA KZA616WJQZ 5.0
5.6
H Vout Vin
1
TO MAIN2(TERMINAL) GND
0
2
002 D9610 D9613
D+3.3V 1.2 5.6 EXA697WJQZ DA1010
Nr ON
3
002
D+5V 5.6V
DC-DC 5.5V 150-750mA
002 C9643
BU+3.3V L9606
TL9609 15uH 1.8A 0.01u FB9601
PB015WJQZ 25V A206WJ
D+5V 5mA
003 D+1.1V 2300-3500mA IC9606 *C9638 GND SW Vin BS
25V
D9605 KZA838WJQZ
D9606 10u 16V
1SS226 TPS53114
G 003 DA1010 *C9623 KZA837WJQZ
M+1.8V
2
10u 25V C9634 IC9608
1u 10V MP2301E
3 Vin V5FILT
8
C9616 C9617
22u *C9624 TL9602
1 22u 10u R9636 R9679
16V 0
6.3V 10K F
6.3V VREG5 EN FB COMP EN SS
10
7
R9608
R9614 R9680
TO MAIN6(FLASH) 0 0
15K R9632 R9635 5 6 7 8
L9603 TRIP FSEL 3.3K 56K F PNL+12V
23 24
11
6
006 PNL+12V R9651
D+3.3V 1.8uH TL9613
0
4.6A,14m C9641 R9638 FB9602
006 C9644 GND
BU+3.3V PGND CER 6800P 3.3K
TL9606
21 GND 22
0.01u
12
5
A206WJ
25V
FB9605 UR+13V
25V
TL9610
19 UR+13V 20 FB9621
DRVL GND A206WJ A206WJ
FB9603 FB9617
13
4
17 UR+13V UR+13V 18
8 7 6 5 C9631 A206WJ FB9606
A206WJ
FB9622
TO MAIN11(DEMOD_CI) 2200P
SW SS A206WJ GND A206WJ
011 FB9604 15 GND 16 FB9618
14
3
D+3.3V Q9601 R9623 A206WJ
TL9612
A206WJ
FW808ME 10K F R9630
13 GND GND 14
F DRVH VFB R9629 4.7K FB9610 TL9614 TL9620 FB9613
15
2
10K AC_DET A074WJ A074WJ
R9620 CZ
4.7K F CZ FB9607 11 AC_DET PS_ON 12
D9611 TL9615 TL9621 FB9616
VBST Vout A192WJ A074WJ
9.1V
16
1
BU+5V R9652
C9627 EXA707WJQZ 9 PNL_POW 10
FB9611 TL9616 TL9622 FB9614 4.7K
0.1u C9668 A042WJ A042WJ
4 25V 0.1u 25V
1 2 3 R9621 GSP/PWM1 NC/SCL
R9613
KZA620WJ FB9608 TL9617
7 8 TL9623 FB9619
10 KZA620WJ A042WJ
4.7 A042WJ
6 5 4 NC/DIMMER NC/SDA
FB9612 TL9618
5 6 TL9624 FB9615
A042WJ A074WJ LAMP_ERR
TO MAIN4(CPU) TL9626 Q9603 OFL ERROR
FB9609
TL9619
3 4 TL9625
004 RN1902 A042WJ
VON
D+1.1V PWM2 STB
UR13V>10V-> ON 1 2
1 2 3 FB9620
004
D+3.3V A074WJ
004
CZ C9608 C9650
100P
PD C9651
C9655
100P
STB+3.3V 100P 100P
R9633 (CH) (CH) (CH)
NB001WJ (CH)
10K
004 P9602
M+1.8V VS CZ
E 004 OFL1
Q9602 Q9604 R9634
C9648
100P
C9669
100P
C9652
100P
C9654
100P
OFL1 2SC3928AR RT1N141C 47K (CH) (CH) (CH) (CH)
0 C9649
004 OFL2 C9653
OFL2 100P
(CH) 100P
PNL_POW
0.6 CZ
(CH)
004
PNL_POW
R9619 R9668
004 AC_DET 47K
AC_DET 2.7K 0
CZ
PNL_POW
R9627
10K
D9607
D9604
DA1010 DA1010
D9603 D9608
EXA689WJQZ EXA689WJQZ C9636
L9605
3.9V 3.9V 0.01u
TL9607 15uH 2.05A
M+1.8V 1000mA PB015WJQZ 25V
KZA838WJQZ 0 0
007 C9609
BU+3.3V L9602
TL9603 PGND
1.8uH PG
9
22u 6.3V
6
007
PS_ON 4700P KZA837WJQZ 4 3 2 1
C9614
LAMP_ERR SW R9610
007 0.1u SS GND SW Vin BS
11
VON
3
C9606
KZA837WJQZ KZA620WJ KZA531WJQZ
47K J
IC9607
007 D9602 Vin MP2301E
AC_DET Vref
13
22u
R9617 R9618
6.3V
DA1010 Vcc R9611 10K F 39K R9681
KZA214WJ Vo
14
*C9612
1
22K F R9616 0
10u 10K F FB COMP EN SS
25V
C TO MAIN8(PANEL)
D+3.3V
008 IC9604 R9612 5 6 7 8
D9601
EXA697WJQZ
5.1V 0-2000mA 10 J
TL9601 C9605 C9630 R9622 C9637
5.6V *C9601 L9601
0.01u
SN910038 0.047u 2.2K 0.01u
10u 16V 15uH 1.8A 10V
TO MAIN5(DDR) PB015WJQZ 25V 25V
005 KZA837WJQZ
D+1.5V
R9607 *IC9610
*C9602 4.7 HC2G66DP
10u
OFL1 2.8 TO MAIN4(CPU)
16V 1 VCC 8
KZA837WJQZ *C9611 3.3 004
TO MAIN12(LAN USB) 10u *C9660 PNL_I2C_EN
4 3 2 1
012 0.1u
D+3.3V 25V
GND SW Vin BS 10V
KZA838WJQZ 2 7 R9664
012 2.8 3.3 10K
U5V
IC9602
MP2303A 3.3
3 6
2.9
R9646
B 10K 0
R9603
FB COMP EN SS 4 GND 5
10K F 2.8
R9601 R9602 5 6 7 8
TO MAIN9(AUDIO AMP) 6.8K 47K F
C9607 OFL2
009
D+5V R9605 0.01u
3.3K 25V *R9643
009 C9604 0
D+3.3V 6800P
009 25V
AMP+13V
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2 – 11
LC-60LE632U/LC-70LE732U
MAIN Unit-11
MAIN11(DEMOD_CI)
J
DUNTKF733WE19/DUNTKF733WE17
TUNER_SDA
TUNER_SCL
ATSC_IF_AGC
I
*C4443
0.1u *C4453
*R4448 *R4449
0.1u *TP4405 *TP4407
10V 4.7K 4.7K
10V
75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51
NC
SA1
SA0
H
VDD12
VDD33
VDD12
VDD33
VDD12
VDD33
DGND12
RF_AGC
DGND33
DGND12
DGND12
DGND33
GPIO3
DGND12
GPIO2
DGND33
ANT_RX
ANT_TX
IF_AGC
ANT_DET
TUNER_CLK
76 NC NC 50
TUNER_DATA
*R4456 *TP4408
TO MAIN4(CPU) 10 *C4414
77 NC GPIO1 49
004 ATSC_DEMOD_SCL 0.1u
TU_DEMOD_SCL
3
10V
004 ATSC_DEMOD_SDA 78 NC RESET 48
TU_DEMOD_SDA
1
ATSC_DEMOD_SCL
79 AVSS1 HOST_CLK 47
*R4453
10
ATSC_DEMOD_RST
80 AVDD1 DGND12 46
G
MT5112_IFN
81 IN- VDD12 45
MT5112_IFP ATSC_DEMOD_SDA
82 IN+ HOST_DATA 44
83 NC DGND33 43
*R4452
4.7K
84 NC VDD33 42
*R4458
F TO MAIN1(TUNER) 10 85 NC DGND12 41
TU_SDA
001 TUNER_SDA
*IC4405
3
86 REFBOT VDD12 40
001 TUNER_SCL
TU_SCL *C4441 *TP4409
1
*C4421
10u
MT5112EE
0.1u 87 VCMEXT TSERR 39
001 ATSC_IF_AGC 10V
ATSC_IF_AGC 10V
*C4463 *C4445
KZA616WJQZ
0.1u ATSC_TS_VAL
001 0.01u MT5112_IFN 88 REFTOP TSVAL 38 1
2
ATSC_IFN 10V
ATSC_IFP
001
*C4464
0.01u MT5112_IFP *C4422
89 NC
ATSC Demodulator TSCLK 37
4 3
ATSC_TS_CLK
0.1u
ATSC_TS_SYNC
10V
6 5
E 90 NC DGND33 36 ATSC_TS_D0
8 7
91 NC VDD33 35 *R4450
22
92 AVDD2 TSSYNC 34
TO MAIN4(CPU)
004 ATSC_DEMOD_RST
ATSC_DEMOD_RST NC
93 TSDATA0 33
004 ATSC_TS_VAL
ATSC_TS_VAL
94 AVSS2 TSDATA1 32
004 ATSC_TS_CLK
ATSC_TS_CLK
D
004 ATSC_TS_SYNC 95 NC DGND12 31
ATSC_TS_SYNC *C4438
10P D
004 ATSC_TS_D0 CCZ
ATSC_TS_D0
96 XTAL2 VDD12 30
*C4456
1
NC 10u
97 XTAL1 TSDATA2 29 10V
KZA616WJQZ
SCA236WJQZ
*R4401
*X4402
25MHz
1M NC TSDATA3 28
98
NC
99 NC DGND33 27
2
C
100 AVSS2 VDD33 26
TSDATA4
TSDATA6
TSDATA5
TSDATA7
*C4444
DGND33
DGND12
AVDD2
AVDD3
AVDD4
VDD33
AVSS3
AVSS4
VDD12
GPIO0
10P D
NC
NC
NC
NC
NC
NC
CCZ
NC
NC
NC
NC
NC
TO MAIN4(CPU) *FB4401
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
A192WJ
004
CPU_A+1.2V
*C4467
10u
16V *C4416
KZA837WJQZ 0.1u
B 10V *C4449 *TP4406
0.1u *C4454 *C4455
0.1u
*C4410 10V 10u
*L4401 10u 10V 10V 10V
TO MAIN10(POWER) *FB4403 10uH KZA616WJQZ KZA616WJQZ
A192WJ CEM
010
D+3.3V
*C4402 *C4404
0.1u
10u
10V
10V
KZA616WJQZ
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2 – 12
LC-60LE632U/LC-70LE732U
MAIN Unit-12
MAIN12(LAN_USB)
DUNTKF733WE19/DUNTKF733WE17
J J9502
ZA265WJQZ *P9501
NA326WJ
TO MAIN4(CPU)
N_CPU_USB1_FLG
004 UB TO WIFI-UNIT
6 NC
USB_DN
USB_DP
GND
+5V
5 GPIO3(WoWLAN)
4 3 2 1 *FB9511
4 GND
A192WJ A192WJ
FB9502
USB:500mA max 3 D+
I FB9501
AP2151WG A192WJ
2 D-
IC9502
1 VBUS(5V)
*C9510 *FB9513
10u OUT IN *C9512
5
A192WJ
16V 10u 16V
KZA837WJQZ KZA837WJQZ
GND
2
VA9502 *VA9508
VA9501 *VA9507
NC
FLGB EN VXA074WJ VXA074WJ
4
VXA074WJ 39V VXA074WJ 39V
39V 39V
1.1pF 1.1pF
1.1pF 1.1pF
4
1
4
1
R9511
H R9506
10K 47K
L9503
TO MAIN10(POWER SUPPLY) FA228WJ
*L9502
FA228WJ
010
D+3.3V
010
U5V
3
2
3
2
TO MAIN4(CPU)
004
USB_D1P
004
USB_D1N
004
USB_D0N
G 004 J9504 *J9501
USB_D0P
ZA265WJQZ ZA105WJQZ
004
N_USB_RST USB:1500mA max
1 2 3 4 5 6 7 8
USB_DN
USB_DP
*R9502
GND
75 F
+5V
*C9516 FB9503 FB9508
10u 16V A206WJ 4 3 2 1 *C9503
A206WJ *R9501 1000P
75 F
*R9503
KZA837WJQZ 75 F
F
8 7 6 5
VA9506 *R9504
VA9505 VXA074WJ
NC OUT OUT FLGB VXA074WJ 75 F
39V
4
1
39V
1.1pF
1.1pF
IC9503
AP2181SG
L9501
GND IN IN ENB
3
2
FA228WJ
16 15 14 11 10 9
1 2 3 4
E C9553
C9554
0.1u CZB
*C9518 0.1u
10u 16V CZB
KZA837WJQZ
R9555
10K *T9501
CZ C9561
0.1u ZA129WJQZ
36 35 34 33 32 31 30 29 28 27 26 25
CZB
R9516
R9556 10K CZ
DM1
DM4
DM2
DP4
VSS
DP2
DP1
VSS
DM3
10 CZ
DP3
VDD25
VDD33
37 SYSRSTB VDD25 24
C9520
1u CKZ 1 2 3 6 7 8
38 PPB4 VSS 23
D R9509
10K 39 CSB4 DPU 22 C9563
CZ 0.1u
R9554 R9519 C9564
CZB 0.1u
10K 10K CZ 40 PPB3 DMU 21 FB9510
CZ CZB
A206WJ
41 CSB3 VDD33 20
C9562 *C9504 *C9505
C9559 4.7u 0.01u 0.01u
R9514
42 VSS IC9505 AVDD 19
1000P 10V 25V 25V
510K CZ CZB KZA761WJQZ
43 PPB2 PD720114 AVSS 18
R9512 C9560
10K CZ 0.1u
CSB2 10V *C9501 *C9502
44 AVDD 17 FB9509
R9517 0.1u 0.1u
510K CZ A206WJ 10V 10V
45 PPB1 AVSS_R 16
R9513
C 10K CZ R9522
46 CSB1 15
VDD25OUT
RREF
R9510 2.43K
15K F RR-SZA126WJQZY
47 VBUSM TEST 14
CZ
VSSREG
VDD33REG
48 13
GREEN
BUS_B
VDD33
AMBER
R9518
LED1
LED2
C9515
LED4
LED3
10K CZ J
X1
X2
1u VDD25
CKZ R9521
1 2 3 4 5 6 7 8 9 10 11 12 10K
F
*C9517
10u 16V
KZA837WJQZ
C9552
22u M C9555
B 6.3V 0.1u C9558
KZA214WJ CZB R9520 0.1u
X9502 0 CZB
SCA238WJQZ CZ J
4 NC 3
1 NC 2
C9557 TO MAIN4(CPU)
C9556 8P 004
30MHz D
10P D CCZ CPU_DATMDI_RJ45_TP
CCZ
004
CPU_DATMDI_RJ45_TN
004
CPU_DATMDI_RJ45_RP
A CPU_DATMDI_RJ45_RN
004
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2 – 13
LC-60LE632U/LC-70LE732U
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2 – 14
LC-60LE632U/LC-70LE732U
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
2 – 15
LC-60LE632U/LC-70LE732U
—MEMO—
2 – 16
PartsGuide
LC-60LE632U/LC-70LE732U
PARTS GUIDE
No. S31P170LE732U
LC-60LE632U
MODELS LC-70LE732U
CONTENTS
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these
parts with specified ones for maintaining the safety and performance of the set.
2
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
3
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
4
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
5
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
6
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
7
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
8
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
9
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
10
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
11
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
12
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
13
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
14
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
15
LC-60LE632U/LC-70LE732U
NO. PARTS CODE PRICE NEW PART DESCRIPTION
RANK MARK DELIVERY
16
LC-60LE632U/LC-70LE732U
LC-60LE632U/LC-70LE732U
SHARP CORPORATION
AV Systems Group
Mar. 2011 CS Promotion Center
SH. DS Yaita,Tochigi 329-2193, Japan