Professional Documents
Culture Documents
Manual PDF
Manual PDF
Introduction
This manual will illustrate installing and using Distance plug-in for CSI SAP2000. Distance Plug-in will
calculate the distance between two points.
Requirements
1. SAP2000 v16 or v17
Installation
1. After running the installer, run CSI SAP2000® and go to Tools Add / Show Plug Ins…
2. In Plug In Name type “SAP2000Plugin_MALI_Distance”, and in Menu Text type “Distance” then
click Add.
3. If the status is OK, close the dialog box and run the command from Tools menu
Usage
The output will depend on the selection as following, if you select:
One Area
The plug in will calculate the distance between the maximum and minimum point.
One Frame
The Plug In will calculate the distance between the end points
Two Frames
The Plug In will calculate the distance between the mid points
Developer
Mostafa Ali (engabdomostafa@gmail.com)
Version History
Version Date Description
1.0.0 July 18, 2014 Initial version of the plug-in
2.0.0 November 8, 2014 Support SAP2000 v17
Using WiX installer®