Professional Documents
Culture Documents
SPECIFICATION COMMENTARY
4.1 .1 For heights less than or equal to 25.4 m R4.1.1 The tolerance for plumb varies with the height above
the top of foundation or the lowest support level of the
For lines, surfaces, corners, and arrises: the lesser of structure. B etween the top of foundation and a height of
0.3% times the height above the top of foundations or 25.4 m, the tolerance is 0.3% of the height until a maximum
lowest s u pport l evel as shown on P roject Drawings dimension of 25 mm is reached. Refer to Fig. R4. 1 . l (a)
o r ±25 m m This section shall not be used to evaluate and (b). The tolerance for the outside corner of exposed
local departure from a specified plane or form irregu lari corner columns and for contraction joint grooves in exposed
ties. Refer to Section 4 . 8 . 2 and 4.8.3, respectively. concrete is more stringent.
! 11
or lowest support level
II
'
.
+
_ _ Top of foundation or
- · - · · -
lowest support level
(a)
PLAN
VIEW
Tolerance
(b)