Professional Documents
Culture Documents
Simbas Serie 1250 PDF
Simbas Serie 1250 PDF
Simba 1250-series
Technical specification
Standard features
»Rock drill
• Atlas Copco COP 1800-series »Control system
• Dual-damping system for shock wave absorption and • Electrical Direct System (EDS)
continuous rock contact for high penetration • Anti-jamming system
• Lubricated and pressurized mating surfaces giving long
service intervals »Carrier
• Shank adapters suitable for the given hole range
• Mine-adapted carrier for small- to medium-sized drifts with
articulated steering and four-wheel drive
»Drilling unit
• Mechanized rod handling system »»General
• Feed with hydraulic two-stage cylinder
• Front- and rear-mounted stingers • Trolley-mounted operator panel
• Drill steel support for guidance during collaring and • FOPS-approved protective roof
as support during rod handling • Electrical cable reel
• Working lights on tripods
»Positioning unit
• Available in three configurations:
-- Simba 1252 with tilt, rotation and pendulum arm
-- Simba 1253 with tilt, rotation and slide table
-- Simba 1254 with tilt, rotation, pendulum arm and slide
table
• Accurate and smooth movements
• Mine-adapted, sturdy components
Simba 1250-series
Specifications
ROCK DRILL »»Electrical system
COP 1838ME
• Total installed power......................................................65 kW
• Main motor at 50 Hz......................................................55 kW
Shank adapter R32, T38, T45 • Voltage.................................................................380–1,000 V
Hole diameter 51–89 mm • Frequency. ................................................................50–60 Hz
Impact power 18 kW • Starting method..........star/delta (380–690 V) direct (1,000 V)
• Thermal overload protection for electric motors
Impact rate 54 Hz
• Percussion hour meters on A-panel
Hydraulic pressure, max. 230 bar • Digital volt/amperage meter in electric cabinet
Rotation motors Separate rotation • Phase sequence indicator
Rotation speed 0–210/0–140 rpm • Earth fault indicator
Lub. air consump. (at 3 bar) 5 l/s • Battery charger
Water consumption 50 l/min • Transformer. ...................................................................4 kVA
Weight 171 kg • Working lights on tripods. ................................ 2x200 W, 24V
• Cable reel, inner/outer diameter. .................. ∅ 660/1,195 mm
• Limit switch for cable reel
FEED
BMH 200 BMH 214 BMH 215 BMH 216
»»Air system
• Compressor...................................................Atlas Copco LE7
Total length 3,160 mm 3,465 mm 3,770 mm
• Capacity at 5,400 rpm and 7 bar......................................12 l/s
Drill rod length 1,220 mm 1,525 mm 1,830 mm • Air pressure gauge
Total length with extractor 3,365 mm 3,670 mm 3,975 mm • Hole blowing kit with external air
Specifications
DRILL STEEL
Rock drill Hole diameter, mm Drill rod Shank adapter Guide tube
Optional equipment
»»Drilling system »»Carrier
• Water mist flushing, water oil cooler, external air supply • Fire suppression system, manual/CheckFire/automatic
• Water mist flushing, air oil cooler, external air supply
• Rock drill lubrication surveillance system »»Electrical system
• Dry drilling with dust collector
• COP 1838MEX, COP 1838HE, COP 1838HEX, • Electrical cable on reel, H07RN-F
COP 2550UX • Electrical cable on reel, Buflex
• Plug PC4
• Socket PC4
»»Positioning system • Switch gear
• Rig alignment laser RAL 650 • Electric outlet, main supply voltage
• Angle Reading Instrument, ARI 6C with/without hole • Electrics according to local standards
depth
• Hole depth measurement »»Miscellaneous
• Thread lubrication kit
• Automatic lubrication for positioning/drilling system • Rod holder for extra drill rods
• Central lubrication for positioning/drilling system • Ni-Cr piston rods
• Manual lubrication kit
• Rig washing kit
»»Power packs • Shelf for drill bits and tools
• Heater kit
• Air cooler
»»Protective roof
• Working lights, 2x500 W, 230 V
• Manual spotlight
Simba 1250-series
Measurements
side view
Simba 1254
20o
C
1915
A
2200
1670
Illustrations and photos in this brochure may show equipment with optional extras. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
© Copyright 2008, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited.
Simba 1252
1990 1350 1350 1960
B
1810
Coverage area
Simba 1252 Simba 1253 Simba 1254
945
750 750 750 1500 750
945
945
1500
1150
1150
1150
o 45o 45o
45o 45
1350
1350
1350
235
240
240
1150
1500
1150
1590
2000
2000 2000 2380
WEIGHT
G = Protection yellow/green
gross weight Recommendations are given for surrounding temperature of 40oC.
kg Total 12,500