Professional Documents
Culture Documents
Pressure and Vacuum Switches - CAT216 PDF
Pressure and Vacuum Switches - CAT216 PDF
com
Request Quote
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 1/32
Pressure and Vacuum
Switches Features
Standard models and customized Select models with ATEX, IECEx,
specials cover pressure ranges from CSA, FM, GOST R, INMETRO,
30 inches Hg VAC to 4000 psi. Rostechnadzor (RTN), TIIS, UL
Meets most code and customer
Robust Construction requirements.
Rugged, high-cycle rate tolerance, long
life, not critical to vibration, high overrange Safety Certified to IEC 61508 (SIL)
and proof pressures, excellent corrosion SOR products are certified to IEC
2/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches How to Order
6NN-K5-M4-C2A-YY
Piston Housing Switching Spring Diaphragm & O-Ring Pressure Port Accessories
Element
Design and specifications are subject to change without notice. For latest revision, see sorinc.com.
Applications
SOR pressure switches in this catalog are suitable for a wide variety of continuous pressure
applications. Specific application requirements can normally be met by selecting optional
components, such as, switching elements, diaphragm systems and pressure ports. Certain
applications may require customized specials. Consult the SOR representative in your area or
the factory.
How to Order
Information and data in this catalog are formatted to provide a convenient guide to assist
instrument engineers, plant engineers and end users in selecting pressure switches for their
unique applications.
Steps 1 through 5 are required. Step 6 is optional. Orders must have complete Model Numbers,
i.e., each component must have a designator.
Step 2: Select Housing for type of pressure switch and service (page 9).
Step 3: Select electrical Switching Element for electrical service (pages 10 & 11).
Step 4: Select Diaphragm and O-Ring for process compatibility and containment
(pages 12 & 13).
Step 5: Select Pressure Port for process compatibility and connection (page 14).
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 3/32
Pressure and Vacuum
Switches Quick Selection Guide - Pressure
Basic SOR pressure switches with standard wetted parts are normally suitable for air, oil, water
and non-corrosive processes. Corrosive service and particular customer requirements may require
optional components. Refer to How to Order on page 3 to locate optional components, such as,
housing, switching elements, diaphragm systems, pressure ports and accessories. Each position in
the model number, except Accessories, must have a designator.
Adjustable Typical
Weatherproof Range Dead Band Explosion Proof
Model Number (increasing pressure) psi Model Number
psi (in. wc.) (in. wc.)
12NN - N66 - N4 - B1A (0.6 to 2.5) (0.4) 12L - N66 - N4 - B1A
12NN - K614 - N4 - B1A (2.5 to 45.0) (0.8) 12L - K614 - N4 - B1A
12NN - K2 - N4 - B1A 0.4 to 2.0 0.1 12L - K2 - N4 - B1A Explosion Proof
Weatherproof 12NN - K4 - N4 - B1A 0.5 to 6.0 0.1 12L - K4 - N4 - B1A
12NN - K5 - N4 - B1A 0.75 to 12 0.1 12L - K5 - N4 - B1A
12NN - K45 - N4 - B1A 1 to 16 0.15 12L - K45 - N4 - B1A
Piston 12 Overrange 200 (psi) Proof 400 (psi)
Adjustable
Typical
Weatherproof Model Range Explosion Proof
Dead Band
Number (increasing pressure) Model Number
psi
psi
4NN - K2 - N4 - B1A 2 to 8 0.2 4L - K2 - N4 - B1A
4NN - K4 - N4 - B1A 2 to 25 0.3 4L - K4 - N4 - B1A
4NN - K5 - N4 - B1A 3 to 50 0.4 4L - K5 - N4 - B1A
Weatherproof 4NN - K45 - N4 - B1A 4 to 75 0.5 4L - K45 - N4 - B1A Explosion Proof
Piston 4 Overrange 750 (psi) Proof 1000 (psi)
4/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Quick Selection Guide - Pressure
Typical
Adjustable Range
Weatherproof Dead Explosion Proof
(increasing pressure)
Model Number Band Model Number
psi
psi
6NN - K2 - N4 - F1A 7 to 30 0.5 6L - K2 - N4 - F1A
6NN - K3- N4 - F1A 12 to 100 0.9 6L - K3 - N4 - F1A
6NN - K5- N4 - F1A 20 to 180 1.4 6L - K5 - N4 - F1A
Weatherproof 6NN - K45- N4 - F1A 25 to 275 1.9 6L - K45 - N4 - F1A Explosion Proof
Weatherproof 52NN - K117 - M4 - B1A (40 - 0 - 40) (0.9) 52L - K117 - N4 - B1A
Explosion Proof
54NN - K117 - M4 - B1A 15 - 0 - 15 0.4 54L - K117 - N4 - B1A
54NN - K118 - M4 - B1A 30 - 0 0.6 54L - K118 - N4 - B1A
56NN - K216 - M2 - F1A 30 - 0 - 20 0.8 56L - K216 - M2 - F1A
56NN - K316 - M2 - F1A 30 - 0 - 160 1.1 56L - K316 - M2 - F1A
Piston 52 Overrange 200 (psi) Proof 400 (psi)
54 750 1000
56 1500 2500
Standard Construction Notes
• Housing: NN - aluminum; L - cast iron 1. See balance of catalog for construction options.
• Switching Element: SPDT; K - 15 amps @ 250 VAC 2. Dead band values are expressed as typical
• Diaphragm & o-ring: N4 - primary (wetted) expected at mid-range for a particular model
diaphragm, TCP; o-ring (wetted) Buna-N. Piston number. See Dead Band Considerations on page 8.
56 primary (wetted) diaphragm, 316SS. 3. Design and specifications subject to change
• Pressure Port: 1/4” NPT(F); B1A - aluminum; without notice. For latest revision, see sorinc.com.
F1A - carbon steel
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 5/32
Pressure and Vacuum
Switches Glossary of Terms
SOR recognizes that there is no industry convention with respect to terminology and definitions
pertinent to pressure switches. This glossary applies to SOR pressure switches.
6/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Step 1: Piston-Spring
6NN-K5-M4-C2A-YY
This table is a listing of piston-spring combinations and the corresponding adjustable ranges, dead bands,
overrange and proof pressures. Adjustable range is expressed for increasing pressure; the set point must be
within the adjustable range. Dead band is expressed as typical. See Dead Band Considerations on page 8.
1. Dead band values are expressed as typical 5. Diaphragms may have an additional effect on
expected at mid-range with the standard K dead band. See page 13, Note 9.
switching element assembly installed. When 6. Diaphragm life may be limited by using T or H
optional switching elements are specified, switching elements with Numbers 1 and
corresponding dead band multipliers shown 9 pistons.
on pages 8 and 10 must be applied. 7. Metric bar (mbar) values are practical
2. The 12/66 piston/spring combination is equivalents of the reference English values; not
available with the N switching element only. necessarily exact mathematical conversions.
3. Adjustable range becomes 10 to 45 in. wc This data appears on the product nameplate
whenever switching elements other than K, KA, when metric engineering units are specified.
W, D or M are used. 8. A breather drain (Accessory KK, see page 16)
4. Special ranges may be possible. Consult the should be specified when low pressure
factory or the SOR representative in your area. adjustable ranges are used in environments
with significant ambient temperature changes.
9. Filled isolators attached to the pressure switch
will affect dead band.
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 7/32
Pressure and Vacuum
Switches Step 1: Piston-Spring
52NN-K116-M4-C2A-YY
This table is a listing of piston-spring combinations and the corresponding adjustable ranges, dead bands,
overrange and proof pressures. SOR vacuum switches are compound; they will operate in either vacuum or
pressure modes. The adjustable range is expressed from maximum vacuum decreasing to zero gauge and
increasing to maximum pressure. Dead band is expressed as typical. See dead band considerations below.
The set point must be within the adjustable range. A vacuum switch is generally better suited than a pressure
switch for set points very near zero gauge.
Notes
1. Dead band values are expressed as typical 3. Number 56 piston is not available with a “T”
expected at mid-range with the standard K micro switch
switching element assembly installed. When 4. Diaphragms may have an additional effect
optional switching elements are specified, on dead band. See page 13, Note 9.
the corresponding dead band multipliers shown 5. Metric bar (mbar) values are practical
below must be applied. equivalents of the reference English values;
2. Special ranges may be possible. Consult the not necessarily exact mathematical conversions.
factory or the SOR representative in your area. This data appears on the product nameplate when
metric engineering units are specified.
Dead Band Considerations
1. Dead band values are expressed as typical expected at
mid-adjustable range using the standard K switching element. Switching Element Dead Band
When optional switching elements are specified, corresponding Designators Multiplier
dead band multipliers must be applied. K, KA, N, W 1.0
2. Dead bands are fixed (non-adjustable), except when T or H D, E, J, M, Y 1.5
switching elements are used.
A, B, EF, G, JF 3.0
3. Dead band can be adjustable by selecting T or H switching
element. (Diaphragm life may be limited when used with L, YY 3.5
Numbers 1 and 9 pistons.) AF, CA, EE 4.0
4. Dead band multipliers must be applied to the typical dead band
BD, C, JJ, S 5.0
value shown for piston spring combination in specifications,
pages 7 and 8, whenever optional switching elements other EG, JG 5.5
than K, KA or W are used. AA, BB, GG, KK 6.0
5. Dead band can be widened by selecting an optional switching
LL 6.5
element with a multiplier greater than 1.0.
Example: Model 6NN-G5-M4-C2A-YY AG 8.5
Typical Dead Band 1.4 psi T 2.5 to 6.5
G-Switching Element multiplier = 3 H 1.0 to 3.0
Corrected Typical Dead Band 1.4 x 3 = 4.2 psi
6. See item #9, page 7.
8/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Step 2: Housing
General Purpose NEMA 1 6NN-K5-M4-C2A-YY
Electrical: Exposed contacts
Electrical: 3/4” NPT(F) - Right Electrical: 3/4” NPT(F) - Left, Right Material: Aluminum
Material: Aluminum Material: Aluminum Open bracket with exposed switching
See Agency Listings pages 17 & 18. element-does not meet NEMA 1.
See Switching Element Groups See Switching Element Groups
PP 1, 2, 3 & 4 below. P3 1, 2, 3, & 4 below. H3 See Switching Element Groups 1 &
3 below.
Electrical - RN: 3/4” NPT(F) - Right Electrical - RT: 3/4” NPT(F) - Right
Electrical - RM: M20 x 1.5 - Right Electrical - RS: M20 x 1.5 - Right
Electrical: 3/4” NPT(F) - Right Six-place compression type terminal Six-place compression type
Material: Carbon Steel block terminal block
See Switching Element Material: Aluminum Material: 316SS
N6 Group 1 below. RN See Agency Listings pages 17 & 18. RT See Agency Listings pages 17 & 18.
RM See Switching Element Groups RS See Switching Element Groups
1, 2, 3 & 5 below. 1, 2, 3 & 5 below.
Electrical: 3/4” NPT(F) - Right
Manual reset only
Six-place compression type
terminal block
Material: Aluminum
See Agency Listings pages 17 & 18.
RB See Switching Element Group 6 below.
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 9/32
Pressure and Vacuum
Switches Step 3: Switching Element
6NN-K5-M4-C2A-YY
Switching Electrical Electrical Dead Band
AC Rating DC Rating Resistive Designator
Element Contact Connection Multiplier
Service Type Type Volts Amps Volts Amps Volts Amps SPDT DPDT SPDT DPDT
Normal
Double Switching Element DPDT - (2) SPDT Synchronized actuation/deactuation at increasing/decreasing set points.
250 15 125 0.4* 30 5.0* 1.0 6.0 K KK
Service AC
All other Switching Elements _ 18” 18 AWG Color-Coded Wire Leads except when terminal blocks are specified.
Low Power 125 1 - - 28 1.0* 1.0 - KA -
Gold Contacts 125 1 - - 30 1.0 1.5 5.0 J JJ
Wide Dead Band AC 250 15 125 0.5 - - 3.0 6.0 G GG
AC or DC 250 11 125 0.5* 30 5.0 3.0 6.0 A AA
Wide Dead Band DC 250 15 125 0.5 30 10* 3.5 6.5 L LL
Narrow Dead
250 5 125 0.5* 30 5.0* 1.5 4.0 E EE
Band DC
Very Wide Dead
250 15 125 0.5 - - 5.0 - C -
Band DC
Very High- 1.5
Capacity DC Minimum
125 10 125 - - 5.0 - S -
Magnetic 10.0
Blow-Out Maximum
250 5 125 0.3 - - 3.0 6.0 B BB
Hi-Ambient
Temperature 250 5 125 0.5* - - 1.5 3.5 Y YY
K, KA, G, L, C, N, S, Y, W Switching Elements - Screw Terminals.
Rating - 400°F
250 5 125 0.3* - - 1.0 - W -
Low Pressure Service
250 10 - - - - 1.0 - N -
12-66 only
Wide Adjustable 2.5 to
250 15 125 0.4* - - - T -
Dead Band 6.5
Narrow Adjustable 1.0 to
250 15 - - - - - H -
Dead Band 3.0
T & H Switching Elements - Consult Factory.
Single Switching Element SPDT - (1) SPDT
Manual Reset -
(Automatic Actuation D -
Increasing Pressure)
250 15 125 0.5 - - 1.5 -
Manual Reset -
(Automatic Actuation M -
Decreasing Pressure)
Cross reference compatibility chart on page 9 to ensure that switching element will fit in housing.
Review notes on page 11 for more details.
10/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Step 3: Switching Element
6NN-K5-M4-C2A-YY
Notes
1. Double switching elements have wire leads 5. Switching elements W, & Y have Elgiloy springs.
except when supplied in housings RB, RM, 6. Certain switching elements are capable of
RN, RS, RT, B3, B4, B5, B6 and J4. Terminal handling greater voltage and/or amperage.
blocks are standard in these housings. Consult the factory should your requirements
2. Dead band multipliers must be applied to the exceed catalog values. All switching elements
typical dead band figures given in the above except BD are UL Recognized and CSA
specification tables on pages 7 and 8. Certified. The DC current ratings marked with an
3. Switching element ambient temperature limits: asterisk (*) are not UL Listed but have been
verified by testing and/or experience.
-65 to 400oF (-54 to 204oC) B, Y, W 7. Ambient temperature is reduced to 200°F (93°C)
-65 to 250oF (-54 to 120oC) A, E, & J for J, JJ, A, AA, E, EE, B, BB, Y, YY, & W switching
-40 to 167oF (-40 to 75oC) AF, AG, EF, elements when CV accessory is selected.
EG, JF, JG
-13 to 158oF (-25 to 70oC) BD
Caution: The switching element assembly
-65 to 180oF (-54 to 80oC) All others
has been precisely positioned in the housing
4. The hermetically sealed switching element at the factory for optimum performance. Any
capsule is ATEX Approved, UL Listed, CSA inadvertent movement or replacement in the
Certified and TestSafe Approved as an explosion field will degrade performance, could render
proof snap switch according to the following the device inoperative, and can void the
table with conditions and exceptions specified warranty unless factory authorized procedures
in Note 3. are followed.
Hazardous Location
Agency Designator
Conditions
Class I, Groups A, B,
UL Listed C, & D AF, EF, AG,
CSA Certified Class II, Groups E, F EG, JF, JG
& G; Divisions 1 & 2
Ex s IIC T6 IP65
TestSafe AF, EF,
Class I, Zone I DIP
Approved AG, EG
T6 IP65
AF, EF, AG,
ATEX Approved II 2 G EEx m II
EG, JF, JG
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 11/32
Pressure and Vacuum
Switches Step 4: Diaphragm & O-Ring
6NN-K5-M4-C2A-YY
Notes
O-Ring Diaphragm
1. N4 diaphragm system is standard, but requires Designator
(Wetted) (Wetted Primary)
a designator in the model number. It is normally
suitable for air, oil, water and noncorrosive Viton A4
Monel
processes. M2 diaphragm system is standard Kalrez* A6
on Number 56 vacuum switches. (See notes Viton H4
Hastelloy-B
10 & 13.) Kalrez* H6
2. U7 designates a welded flush-type diaphragm. Viton J4
Available only in 1” NPT(M) 316SS on Hastelloy-C
Kalrez* J6
Numbers 5 & 6 pistons with K switching
element. See page 15. Viton L4
Carpenter-20
3. U8 designates the welded fire-safe diaphragm Kalrez* L6
system. 316SS is stocked. Not available on Viton GLT M1
Number 1 piston or vacuum switches. Buna-N M2
Example: U8-C2A is a 316SS fire-safe welded Viton M4
diaphragm system. See page 15.
Neoprene M5
4. U9 designates a welded diaphragm system. 316L SS
Not available on vacuum switches. Kalrez* M7
Example: U9-A1A is a Monel welded Aflas M8
diaphragm system. See page 15. M9
EPR
5. Other diaphragm and o-ring combinations may (See Note 11)
P1
Buna-N Buna-N
(See Note 13)
Neoprene Neoprene R1
Viton S1
Viton
(Continued on page 13.) Viton GLT S2
Buna-N W2
Viton Tantalum W4
Neoprene (See Note 10) W5
Kalrez* W6
EPR EPR Y1
U7
None Welded
(See Note 2)
U8
None Fire-Safe Welded
(See Note 3)
U9
None Welded
(See Note 4)
12/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Step 4: Diaphragm & O-Ring
6NN-K5-M4-C2A-YY
7. N3 diaphragm system utilizes a durable 9. Dead bands are slightly higher when using
back-up diaphragm for high cycle-rate, high H, J, N3, N6, U or W series diaphragm
shock applications where Buna-N and TCP are options. Consult the factory.
compatible with the process. Consult factory if 10. Diaphragm systems N1, N3, N4, N5, N6, N7,
process temperatures are well below freezing. N8, P1, R1, S1, S2, W2, W4, W5, W6, Y1,
8. This table shows allowable minimum and U8, U9 are not available on vacuum switches
maximum temperatures for o-rings. Consult the with number 52, 54 or 56 pistons.
factory for temperatures down to –65°F on 11. M9 diaphragm system is suggested for steam
fire- safe and welded metal diaphragm applications up to 400°F.
systems. 12. If Kalrez, EPR or Viton is selected for high
temperature process media or ambient
O-Ring Material °F °C temperature requirements, the A, B, E, J, W or
Viton 32 to 400 0 to 204
Y switching elements are suggested with
reference to the table in Note 3, page 11.
Viton GLT -20 to 400 -29 to 204
13. Only diaphragm systems N1, N4, N5, N7, N8
Kalrez* 5 to 400 -15 to 204 and P1 are available on the 12-66 piston
Aflas 25 to 400 -4 to 204 spring combination.
Buna-N
-30 to 200 -34 to 93
Neoprene EPR
Fire-Safe/Welded
-30 to 400 -34 to 204
Diaphragm System
TCP Teflon-Coated
Polyimide -30 to 400 -34 to 204
Diaphragm
*Kalrez or equivalent Perfluoroelastomer (FFKM) o-rings
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 13/32
Pressure and Vacuum
Switches Step 5: Pressure Port
6NN-K5-M4-C2A-YY
6, 5,
12, 4 6, 5, 9 12, 4 6, 5, 9
Piston 9 4, 54 12, 52 12, 52
52, 54 1, 56 52, 54 1, 56
1, 56
2” NPT(F)
Process
1/4” NPT(F) 1/2” NPT(F) 3/4” NPT(M) 1” NPT(M) 1” NPT(F) 1/4” NPT(F)
Connection Size Flushing Port
Aluminum
Series 2000 B1A - B2A - - - - -
Wrought 356 or (Standard)
360 Casting
Carbon Steel
Ledloy Wrought - F1A - F2A F3A - - -
(Standard)
or WCB Casting
316SS/316LSS
Pressure Port Material
14/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum Welded Diaphragm
Switches & Fire-Safe Systems
Designator Description
U7
Welded Flush-Type Diaphragm System
A metal diaphragm is welded to the process face of the pressure port, thereby,
Process eliminating the o-ring. This arrangement may be indicated for viscous or slurry
Connection
process where cleanliness is required or where process build-up and clogging is
unacceptable.
The pressure port designator determines the material: Only 1” NPT(M) 316SS is
available.
Example: U7-C4A
U7 = 316SS welded flush-type diaphragm
Process C4A = 1” NPT(M) 316SS pressure port
Face Note: U7 is limited to Numbers 5 and 6 pistons and the K switching element. Not
available on vacuum switches.
U8
Piston Shaft
Fire-Safe Welded Diaphragm System
Factory Mutual System Approved - U.S Patent Number 4,438,305
Tested in flames at 1900oF for periods up to 30 minutes while pressurized to the
Spring
rated overrange pressure.
Stop A metal diaphragm, the cylinder disc and the pressure port are welded as a unit,
thereby, eliminating the o-ring. This arrangement may be indicated for extremely
Cylinder corrosive, hot, harsh or volatile process where o-rings are not suitable. See fire-
Disc safe definition on page 6.
316SS is stocked. Hastelloy B and C, and Monel are available, but may require a
longer lead time. The pressure port designator determines the material.
Diaphragm
Example: U8-C2A
U8 = Fire-safe welded diaphragm system
C2A = 1/2” NPT(F) 316SS pressure port
Note: 1/2” NPT(F) is stocked; 1/4” NPT(F) is not stocked and has a longer lead
Pressure Port time. Not available on Number 1 piston and vacuum switches.
C6A
Two-inch Pressure Port
The wide pressure port minimizes the possibility of clogging when the process media is sludgy or
viscous. See page 20 for dimensions. A 2” NPT(F) pressure port with a 1/4” NPT(F) flushing port
can be supplied with a welded diaphragm, or with a conventional diaphragm and o-ring combination.
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 15/32
Pressure and Vacuum
Switches Step 6: Accessories
6NN-K5-M4-C2A-YY
Accessory/Option & Description Designator
Wetted parts are cleaned for oxygen service. BB
ATEX/IECEx approved pressure/vacuum switch. See Agency Listings on page 18 for details. CL
CSA Certified pressure/vacuum switch. Available with PP, NN, RB, RN, RT, B3 and B6. Housing has earth (ground) lug. See Agency
CS
Listings on page 17 & 18 for details.
Neoprene cover gasket (o-ring) to make L, S and TA explosion-proof housings weathertight. CG
Canadian Registration Number (CRN) - Process ratings may be affected. Consult the factory for details. CV
Cemented cover gasket on weathertight housings. GC
Sealed electrical lead adapter. Provides protection to housing interior, switching element and dry side of pressure sensing assembly
GG
from condensate in the electrical conduit and corrosive atmospheres. (Protrudes approximately 2” from housing.)
Universal terminal box. Stainless steel, 1/2” NPT(F). ATEX/IECEx Approved Ex db IIC T4, T5, T6 & Gb. HB**
Universal terminal box. Stainless steel, M20 x 1.5(F). ATEX/IECEx Approved Ex db IIC T4, T5, T6 & Gb. HBME**
Universal terminal box. Stainless steel, 1/2” NPT(F). FM Approved and CSA Certified. Explosion Proof Class I, Groups A, B, C, & D;
HT**
Class II, Groups E, F & G; Class III; Divisions 1 & 2 (NEMA 4X IP65)
Crouse Hinds ECD-15 for Hazardous Locations Class I, Groups C & D, Class II, Groups E, F & G; on S or SC housings only.
Breather Drain KK
Sintered metal plug in weathertight housing.
Terminal block. 6-place compression type standard in B and R series housings. Optional in LC and SC housings. 6-place screw type
LL
standard in J4 housing.
Multi-Listed pressure/vacuum switch. ATEX, IECEx, CSA & UL. Available with B3 & B6 housings. See Agency Listings on Pages 17 & 18 for details. ML
Vacuum protector plate. Retains diaphragm in pressure switch if subjected to vacuum greater than 10 in. Hg. If a pressure switch is
subjected to continuous, rapid changes of vacuum, other protection may be available (consult factory). Material matches or exceeds MM
pressure port material. N/A on Pistons 52, 54, or 56.
Compliance to NACE Certification MR0175/ISO 15156. NC*
INMETRO approved pressure/vacuum switch. See Agency Listings on page 18 for details. NM
Carbon steel body with stainless steel adjusting nut. PB
Pipe (stanchion) mounting kit for (1-1/2 to 2” pipe). PK
Tag, fiber. Attached with plastic wire to housing. Stamped with customer-specified tagging information. PP
Powder coat epoxy coating. No coating on stainless steel parts or plated screws. (500 hours-salt spray) PY
Tag, stainless steel. Attached with stainless steel wire to housing. Stamped with customer-specified tagging information. (2 lines, 18
RR
characters and spaces per line.)
Stainless steel body and adjusting nut for corrosive environments. SB
Stainless steel piston and cylinder disc for corrosion resistance. SP
Explosion proof weatherproof electrical junction box with screw terminals. Aluminum 3/4” NPT(F) top or right conduit connections as
required. UL Listed and CSA Certified Class I, Groups A, B, C & D; Class II, Groups E, F & G; Divisions 1 & 2. (Available on L, LC, S, TB**
SC and TA housing.) Includes cover o-ring for weatherproof applications.
Taiwan Safety Mark. Requires IECEx approval. See Agency Listings on page 18 for details. TS
Oversize stainless steel nameplate or separate stainless steel tag. Permanently attached to housing. Stamped with customer-specified
TT
tagging information.
Fungicidal varnish. Covers exterior and interior except working parts. VV
UL Listed pressure vacuum switch. Available with B3 and B6 housings. See Agency Listings on page 17 & 18 for details. WV
“X” is used as a suffix to the model number for special requirements not keyed elsewhere in the model number by an “X”. Each “X”
must be completely identified in the text of the order or inquiry. When more than one “X” is required, use “X” followed by the number of X
such items. For example, “X3” means three separate otherwise unidentifiable requirements.
Epoxy coating. Exterior only. Polyimide epoxy with 316SS pigment. (200 hours-salt spray) YY
Chained cover with captive screws to conform to former JIC specification. ZZ
Note: See pages 17 & 18 for Agency Approved, Certified or Listed Accessories Options.
* Consult the factory for materials other than 316/316L.
** Agency ratings for SOR product sold with junction boxes will be limited to either the rating of the instrument housing or junction box, whichever is lower.
16/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Test Certificates
Certificates C1 C2 C3 C4 C5 C6 C8 B1 B4 B5 B6 B7 A1 A2 A3 A4 A5 A6 A7 A8
Calibration ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿
Hydrostatic
Pressure Test
¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿
Inspection Report ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿ ¿
Compliance /
Conformance
¿ ¿ ¿ ¿ ¿ ¿ ¿
Dielectric Test ¿ ¿ ¿ ¿
Insulation Resistance ¿ ¿ ¿ ¿ ¿ ¿ ¿
Typical Material
of Wetted Parts
¿ ¿ ¿ ¿ ¿ ¿
Agency Listings
UL For Hazardous Locations Class I, Groups B, C, & D; Class II, Groups E, F, & G; Divisions 1 & 2
Pressure Port
Switching Diaphragm
Piston Housing Spring Material & Accessories
Element & O-Ring
Connection Size
WV or ML
A, AA, AF, AG, B, BB, Required
C, E, EE, EF, EG, G,
ALL B3, B6 GG, H, J, JF, JG, JJ, K, ALL ALL ALL All except CG,
KA, KK, L, LL, N, P, S, T, GC, GG, HB,
W, Y, YY HT, KK, LL, ME,
TB, TS, ZZ
CSA For Hazardous Locations Class I, Groups B, C, & D; Class II, Groups E, F, & G; Divisions 1 & 2
Pressure Port
Switching Diaphragm
Piston Housing Spring Material & Accessories
Element & O-Ring
Connection Size
CS or ML
A, AA, AF, AG, B, BB, Required
C, E, EE, EF, EG, G,
ALL B3, B6 GG, H, J, JF, JG, JJ, K, ALL ALL ALL All except CG,
KA, KK, L, LL, N, P, S, T, GC, GG, HB,
W, Y, YY HT, KK, LL, ME,
TB, TS, ZZ
General Purpose and Weathertight (CSA Enclosure Type 4)
Pressure Port
Switching Diaphragm
Piston Housing Spring Material & Accessories
Element & O-Ring
Connection Size
PP
(General A, AA, B, BB, C, E, EE, CS Required
Purpose) G, GG, GA, H, J, JJ, JL,
K, KK, KA, L, LL, N, S, T,
NN W, Y, YY
(Type 4)
A, AA, AF, AG, B, BB,
ALL ALL ALL ALL
C, E, EE, EF, EG, G,
RN, RT All except
GG, GA, J, JJ, JL, JF, JG,
(Type 4) GC, LL, TS
K, KK, KA, L, LL, N, S, T,
W, Y, YY
RB D, DA, M
(Type 4) (Manual Reset only)
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 17/32
Pressure and Vacuum
Switches Agency Listings
18/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Manual Reset
Manual Reset Button
Weights
Actual shipping weights may vary from the
Weight
Housing (kgs) charted values because of product material,
(lbs)
configuration and packaging requirements.
H3 1.5 0.75
NN, N3, N4, PF, PP, P3 2 1 Note
RB, RM, RN 2.5 1.25 PK Pipe Kit adds approximately 1.5 lbs.
N6 3 1.5 (0.7 kgs). TB Junction box adds
LC, SC 4 2
approximately 5 lbs (2.25 kgs).
L, S 5 2.5
TA 6 3
B3, B4, J4, RT, RS 8 4
B5, B6 10 5
Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
Notes 1. Dimensions in this catalog are expressed as millimeters over inches (Linear = mm/in.).
2. Dimensions marked with an asterisk (*) on housing dimension drawings (pages 20 through 31)
vary with respect to process connection size. The chart below lists these dimension variances.
3. Electrical Connection Size: 3/4” NPT(F) standard. 1/2” NPT(F), 1/2” NPT(M), M20 x 1.5,
PG 13.5, PF 3/4” optional. Consult the factory for compatibility with selected housing or
agency listing.
Piston Number
Process Connection Size
12, 52 4, 54 6, 5, 9, 1, 56
1/4” NPT(F) Shown Shown Shown
Add 13.2
1/2” NPT(F) Shown Shown
0.52
Add 23.1
3/4” NPT(M) - -
0.91
Add 5.6
1” NPT(F) - -
0.22
Add 46.0
1” NPT(M) - -
1.81
Add 25.4
2” NPT(F) - -
1.00
Add 29.7 Add 29.7 Add 29.7
Length “A” 1/4” NPT(M)
1.17 1.17 1.17
Add 38.9 Add 38.9 Add 38.9
Length “A” 1/2” NPT(M)
1.52 1.52 1.52
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 19/32
Pressure and Vacuum
Switches Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
Drawing 0091354
Wide Pressure Port: C6A
See description on page 15.
SALES PAGE
MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER #
71.4 95.3
2.81 3.75
PARALLEL
PERPENDICULAR
MOUNTING
MOUNTING
SCALE 0.375
SCALE 0.375
SWITCH
71.4 31.0 11.9 MOUNTING
2.81 1.22 0.47 HOLES
J REHM
PRODUCT CERTIFICATION DRAWING CHECKED BY
ALL DIMENSIONS ARE 1/16 IN
M SMITH
UNLESS OTHERWISE SPECIFIED ENGINEER APPROVAL
MM
LINEAR = S BOAL
IN
DATE
4/27/16
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
63.5 REF MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
2.50 TITLE
DIM DWG
PIPE MOUNTING KIT
DRAWING NUMBER REV
EO NUMBER: 4935
0090300 4
PERPENDICULAR MOUNTING PARALLEL MOUNTING SCALE: 0.75 DWG SIZE
SHEET 1 OF 1
DO NOT SCALE PRINT B
Model Name: 0090300.ASSEM//+
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
K MITCHELL 76.2
PRODUCT CERTIFICATION DRAWING TO MAX MOUNTING HOLES PRODUCT CERTIFICATION DRAWIN
CHECKED BY 3.00 ALL DIMENSIONS ARE ±1/16 IN
ALL DIMENSIONS ARE ±1/16 IN
J REHM UNLESS OTHERWISE SPECIFIED
1/4 OR 1/2 NPTM UNLESS OTHERWISE SPECIFIED
MM
ENGINEER APPROVAL MM
PROCESS CONNECTION 7.1 LINEAR = S BOAL
LINEAR =
IN
IN
OPTIONAL 0.28 DATE
10 OCT 2011
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR. THIS DRAWING IS THE EXCLUSIVE PRO
NO USE WHATSOEVER OF THE INFORMATION CONTAINED NO USE WHATSOEVER OF THE INFORMA
HEREON, NOR REPRODUCTION IN WHOL
A
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR. MADE WITHOUT THE EXPRESS WRITTEN P
TITLE TITLE
1/4 NPTF DIMENSION DRAWING 12/52 DIMENSION DRAWING 4/54
FLUSHING NN/N3/N4/PP/P3 NN, N3, N4, PP & P3
PORT DETAIL 2 NPTF EO NUMBER: 5123 DRAWING NUMBER REV 1/4 OR 1/2 NPTM EO NUMBER: 5123 DRAWING NUMBE
Designators: NN, N3, N4, PP, PF, P3 Designators: NN, N3, N4, PP, PF, P3
Piston Numbers 12, 52 Piston Numbers 4, 54
Housings PP, P3 and PF are General Purpose. Housings PP, P3 and PF are General Purpose.
(Cover gasket is not installed.) MODEL # SALES ORDER #
(Cover gasket is not installed.)LINE ITEM # PURCHASE ORDER #
SALES PAGE 1
108.1
4.25
52.4
2.06 **56.5
2.22 PROCESS
69.9 LENGTH A
28.6 CONNECTION SIZE
2.75
1.13 1/4 NPTM 29.7
33.3 SHOWN 1.17
1.31 26.1
1.03 38.9
1/2 NPTM
1.53
HOUSING
** DIMENSION
GROUP
NN & N3 SHOWN
ELECTRICAL
CONNECTION 4.6
N4 ADD
3/4 NPTF STD 0.18
1/2 NPTF OPT 1.5
PP & P3 SUBTRACT
M20 X 1.5 F OPT 0.06
(BOTH SIDES ON PROCESS * LENGTH * LENGTH
N3 & P3 HSGS) CONN SIZE 1, 5, 6, 9, 56 2, 3
14.0
1/4 NPTF SHOWN ADD
0.55
*146.8 40.5
1.59 13.2 24.1
5.78 1/2 NPTF ADD ADD
0.52 0.95
14.0
9/16 SAE N/A ADD
0.55
23.1
3/4 NPTM ADD N/A
0.91
13.5 7.1 14685 W 105TH ST LENEXA, KS 66215 USA
2X X 913-888-2630
0.53 0.28
MOUNTING SLOTS 7.1 ISO-9001
SORINC.COM
*54.7 0.28 DRAWN BY
2.15 K MITCHELL
PRODUCT CERTIFICATION DRAWING CHECKED BY
ALL DIMENSIONS ARE ±1/16 IN
J REHM
UNLESS OTHERWISE SPECIFIED ENGINEER APPROVAL
MM
LINEAR = S BOAL
IN
DATE
21 JAN 2013
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
A HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
TITLE
Drawing 0090120
1/4 OR 1/2 NPTM NN/N3/N4/PP/P3
DRAWING NUMBER REV
PROCESS CONNECTION EO NUMBER: 5195
OPTIONAL PROCESS 0090120 22
CONNECTION SCALE: 1.00 DWG SIZE
SHEET 1 OF 1
DO NOT SCALE PRINT B
Piston Numbers 5, 6, 1, 9, 56
Housing PP, P3 and PF are General Purpose.
(Cover gasket is not installed.)
*Refer to Dimensions table on page 19 for changes in length due to process connection size, including A dimension.
**Contact the factory for certified drawings.
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 21/32
Pressure and Vacuum
Switches Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
SALES PAGE 1
MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER #
107.3
Weatherproof - NEMA 4, 4X, IP66 SALE
4.22 MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER #
Housing
SHEET 1 OF 1
Housing
1.53
Model Name: 0090246.ASSEM/9/0 DO NOT SCALE PRINT B
Connection Connection
Model Name: 0090247.ASSEM/4/2+
Reset Form
107.3 NOTES:
4.22
52.0 65.6 50.8 1 1. DIMENSION APPROXIMATE AND BASED
2.05 2.58 2.00 ON A FIVE THREAD ENGAGEMENT
69.9 28.6
2.75 1.12 ELECTRICAL
HOUSING
CONNECTION
33.3 26.2
1.31 1.03 3/4 NPTF STD
RL 1/2 NPTF OPT
LH & RH
M20 X 1.5 F
RM
RH ONLY
ELECTRICAL
CONNECTION 3/4 NPTF STD
SEE CHART RN 1/2 NPTF OPT
PIPE KIT
RH ONLY
MOUNTING BRACKET
OPTIONAL M20 X 1.5 F
RS
RH ONLY
3/4 NPTF STD
RT 1/2 NPTF OPT
*171.8 RH ONLY
6.76
40.5 3/4 NPTF STD
1.59 RU 1/2 NPTF OPT
95.3 71.4 LH & RH
3.75 2.81
M20 X 1.5 F
RW
28.6 LH & RH
1.13 M20 X 1.5 F
*54.7 RY
LH & RH
2.15 7.1
0.28 PROCESS * LENGTH * LENGTH 14685 W 105TH ST LENEXA, KS 66215 USA
CONN SIZE 1, 5, 6, 9, 56 2, 3 913-888-2630
ISO-9001 SORINC.COM
14.0
1/4 NPTF SHOWN ADD DRAWN BY
0.55 K MITCHELL
PRODUCT CERTIFICATION DRAWING
PROCESS 13.2 24.1 ALL DIMENSIONS ARE ±1/16 IN
CHECKED BY
A1 1/2 NPTF ADD ADD M SMITH
CONNECTION 0.52 0.95 UNLESS OTHERWISE SPECIFIED ENGINEER APPROVAL
MM
14.0 LINEAR = S BOAL
9/16 SAE N/A ADD IN
0.55 DATE
06 JUN 2011
37.3 1/4 OR 1/2 NPTM 23.1
1.47 PROCESS 3/4 NPTM ADD N/A THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
0.91 NO USE WHATSOEVER OF THE INFORMATION CONTAINED
71.4 CONNECTION HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
2.81 OPTIONAL
PROCESS TITLE
6.4 1 LENGTH A
133.4 CLEARANCE SLOTS FOR CONN SIZE DIM DWG 1, 2, 3, 5, 6, 9 & 56
0.25
Electrical
5.25 R - SERIES W/PIPE KIT OPTION
63.5 1/4 NPTM 29.7
Drawing 0090245
9.7
Housing
CLEARANCE FOR HARDWARE WITH MIN SHOWN 1.17 EO NUMBER: 5090 DRAWING NUMBER REV
B
Model Name: 0090245.ASSEM/6/5+
Reset Form
*Refer to Dimensions table on page 19 for changes in length due to process connection size,
including A dimension.
22/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
Open Bracket
Drawing 0090027
Designators: H3
Piston Numbers 5, 6, 9, 1, 56
*Refer to Dimensions table on page 19 for changes in length due to process connection size,
including A dimension.
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 23/32
Pressure and Vacuum
Switches Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
Drawing 0090020
Designators: N6
Piston Numbers 5, 6, 9, 1, 56
*Refer to Dimensions table on page 19 for changes in length due to process connection size,
including A dimension.
24/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
161.1
6.34
80.8 120.7
3.18 4.75
TYP
80.8 40.4
3.18 1.59
40.4 TYP *181.5 TYP
1.59 7.15
*181.5 TYP
7.15
DETA
1/4 NPTF 6.7 1 NPT
FLUSHING 0.26 PROCESS CON
*115.3 PORT *115.3 DETAIL 2 NPTF SCALE
4.54PROCESS CONNECTION CLEARANCE
4.54 CLEARANCE SCALE 0.5 6.4
6.4 FOR MOUNTING 14685 W 105TH
*74.9 FOR *74.9 0.25
0.25 HARDWARE
91
2.95 MOUNTING 2.95 ISO-9001 SO
HARDWARE
14685 W 105TH ST LENEXA, KS 66215 USA PRODUCT CERTIFICATION DR
913-888-2630 ALL DIMENSIONS ARE ±1
PROCESS
ISO-9001 SORINC.COM * LENGTH UNLESS OTHERWISE SPEC
CONN SIZE MM
PROCESS DRAWN BY LINEAR =
* LENGTH K MITCHELL 1/4 NPTF
IN
CONN SIZE PRODUCT CERTIFICATION DRAWING SHOWN
A ALL DIMENSIONS ARE ±1/16 IN
CHECKED BY
1/2 NPTF
1/4 NPTF J REHM
1/2 NPTF
SHOWN AUNLESS OTHERWISEMMSPECIFIED ENGINEER APPROVAL
46.0
THIS DRAWING IS THE EXCLU
NO USE WHATSOEVER OF THE I
LINEAR = S ROOS PROCESS 1 NPTM ADD HEREON, NOR REPRODUCTION I
IN
CONNECTION 1.81 MADE WITHOUT THE EXPRESS W
1/4 OR 1/2 NPT PROCESS 5.6 DATE
Designators: L Designators: L
Piston Numbers 12, 52 Piston Numbers 4, 54
SALES PAGE 1
MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER #
PROCESS * LENGTH * LENGTH
CONN SIZE 1, 5, 6, 9, 56 2, 3
14.0
137.3 79.4 50.8 1/4 NPTF SHOWN ADD
0.55
5.41 3.12 2.00
13.2 24.1
133.4 20.7 1/2 NPTF ADD ADD
0.52 0.95
5.25 0.81 14.0
9/16 SAE N/A ADD
71.1 ELECTRICAL 6.4 0.55
2.80 CONNECTION 0.25 23.1
3/4 NPTF STD 3/4 NPTM ADD N/A
0.91
1/2 NPTF OPT
PROCESS
LENGTH A
CONN SIZE
1/4 NPTM 29.7
PIPE KIT SHOWN 1.17
MOUNTING 38.9
BRACKET 1/2 NPTM
1.53
OPTIONAL
80.8
3.18
40.4 TYP
1.59
*178.8 TYP 95.3
7.04 3.75
71.4
2.81
*112.6 28.6
4.43 CLEARANCE
6.4 1.13
FOR
0.25
MOUNTING 14685 W 105TH ST LENEXA, KS 66215 USA
*72.2 HARDWARE 913-888-2630
2.84 SORINC.COM
ISO-9001
DRAWN BY
71.4 CLEARANCE 11.9 K MITCHELL
2.81 7.9 0.47 PRODUCT CERTIFICATION DRAWING
FOR ALL DIMENSIONS ARE ±1/16 IN
CHECKED BY
0.31 J REHM
UNLESS OTHERWISE SPECIFIED
MOUNTING MM
ENGINEER APPROVAL
A 12 OCT 2012
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
1/4 OR 1/2 NPTM PROCESS
PROCESS CONNECTION CONNECTION TITLE
0090144 10
SCALE: 0.80
Designators: L
DWG SIZE
SHEET 1 OF 1
DO NOT SCALE PRINT B
Model Name: 0090144.ASSEM/10/0+
Reset Form
Piston Numbers 5, 6, 9, 1, 56
*Refer to Dimensions table on page 19 for changes in length due to process connection size,
including A dimension.
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 25/32
Pressure and Vacuum
Switches Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
SALES PAGE 1
MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER #
142.3 20.6
5.60 0.81
71.1
2.80 ELECT CONN 6.4
3/4 NPTF(STD) 0.25
1/2 NPTF(OPT)
OR PLUGGED(OPT)
(TYP 3)
80.8
3.18
(TYP)
*186.5
40.4
7.34
1.59
(TYP)
A PROCESS DRAWN BY
CONNECTION J FIXSEN
PRODUCT CERTIFICATION DRAWING CHECKED BY
1/4 OR 1/2 NPT ALL DIMENSIONS ARE ± 1/16 IN
M SMITH
MALE PROCESS CONNECTION UNLESS OTHERWISE SPECIFIED ENGINEER APPROVAL
(OPTIONAL) MM
LINEAR = S BOAL
IN
106.0 DATE
4.17 05-05-04
PROCESS
LENGTH A * LENGTH THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
CONN SIZE NO USE WHATSOEVER OF THE INFORMATION CONTAINED
29.7 HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
1/4 NPT(M) = (SHOWN) 1/4 NPT(F)
1.17 SHOWN
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
Drawing 0090149
2 NPT(F) 25.4
Drawing 0090148
0090149 6
ADD
SEE DETAIL 1.00 SCALE: 0.75 DWG SIZE
SHEET 1 OF 1
DO NOT SCALE PRINT B
Model Name: 0090149.ASSEM/5/3+
Reset Form
Designators: S Designators: S
Piston Numbers 12, 52 MODEL #
Piston Numbers 4, 54
SALES ORDER # LINE ITEM # PURCHASE ORDER #
PROCESS * LENGTH
CONN SIZE 1, 5, 6, 9, 5
1/4 NPTF SHOWN
79.4 50.8
3.12 2.00 13.2
142.3 1/2 NPTF ADD
0.52
5.60 20.6
0.81 9/16 SAE SHOWN
71.1
2.80 6.4 23.1
CLEARANCE 0.25 3/4 NPTM ADD
0.91
6.4
FOR MOUNTING PROCESS
0.25 ELECT CONN LE
HARDWARE 3/4 NPTF(STD) CONN SIZE
1/2 NPTF(OPT) 1/4 NPTM
OR PLUGGED(OPT) SHOWN
(TYP 3)
1/2 NPTM
80.8
3.18
(TYP)
40.4 40.4
*183.8 1.59 1.59
7.23 (TYP)
71.4 95.3
2.81 3.75
28.6
*112.6 1.13
4.43
*72.2
2.84
Designators: S 133.4
5.25
TITLE
MADE WITHOUT THE EXPRESS WRITTEN P
Piston Numbers 5, 6, 9, 1, 56
DIMENSION DRAWING 1/2/3/5/6/9/56
W/PK
DRAWING NUMB
EO NUMBER: 5195
009
*Refer to Dimensions table on page 19 for changes in length due to process connection size, SCALE: 0.63
DO NOT SCALE PRINT
SHEET
26/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
PROCESS PROCESS
LENGTH A * LEN
CONNECTION SIZE CONN SIZE
149.5 MIN 106.2 50.8 149.5 MIN 106.2 50.8
5.88 4.18 2.00 1/4 NPTM 29.7 5.88 4.18 2.00 1/4 NPTF
SHOWN 1.17 SHO
133.4 ELECTRICAL 34.0 133.4 ELECTRICAL 34.0 1/2 NPTF
5.25 CONNECTION 1.34 38.9 5.25 CONNECTION 1.34
1/2 NPTM
3/4 NPTF STD 1.53 3/4 NPTF STD 1 NPTM ADD
71.4 MIN 8.7 71.4 MIN 8.7
2.81 1/2 NPTF OPT 0.34 PROCESS * LENGTH * LENGTH 1/2 NPTF OPT
2.81 0.34 PROCESS
CONN SIZE BRASS & ALUM ALL OTHER LENG
CONN SIZE
1/4 NPTF SHOWN SHOWN 1/4 NPTM 29
SHOWN 1.
1/2 NPTF SHOWN SHOWN
38
1/2 NPTM
19.8 5.6 1.
1 NPTF ADD ADD
0.78 0.22
54.0 PIPE KIT
25.4 25.4 54.0
2.13 MOUNTING 2 NPTF ADD ADD
1.00 1.00
TYP BRACKET 2.13
OPTIONAL TYP PIPE KIT
OPTIONAL
108.0
4.25 108.0
TYP 4.25
*202.9 *202.9 TYP
7.99 95.3 7.99
3.75
95.3
71.4 3.75
2.81
*121.7 71.4
4.79 *121.7 2.81
CLEARANCE 28.6 SCALE 0.25 DETAIL 1 NPTM
4.79
6.4 1.13 SCALE 0.25
FOR 28.6
0.25 14685 W 105TH ST LENEXA, KS 66215 USA CLEARANCE
MOUNTING 1.13
*67.7 913-888-2630 6.4
2.67 HARDWARE SORINC.COM FOR 14685 W 105TH ST LENEXA, KS 662
ISO-9001 *67.7 0.25
913-888-2630
2.67
DRAWN BY MOUNTING SORINC.COM
K MITCHELL HARDWARE ISO-9001
PRODUCT CERTIFICATION DRAWING
CLEARANCE ALL DIMENSIONS ARE ±1/16 IN
CHECKED BY DRAWN BY
M SMITH K MITC
7.9 UNLESS OTHERWISE SPECIFIED PRODUCT CERTIFICATION DRAWING
FOR MM
ENGINEER APPROVAL CHECKED BY
0.31 LINEAR = S ROOS CLEARANCE ALL DIMENSIONS ARE ±1/16 IN
IN M SMIT
MOUNTING DATE
7.9 UNLESS OTHERWISE SPECIFIED ENGINEER A
A PROCESS HARDWARE 19 NOV 2012 FOR MM
0.31 LINEAR =
IN S ROOS
CONNECTION THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED MOUNTING DATE
A
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE PROCESS HARDWARE 19 NO
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR. CONNECTION THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR
TITLE NO USE WHATSOEVER OF THE INFORMATION CONTAIN
1/4 OR 1/2 NPTM DIMENSION DRAWING 12/52 LC
HEREON, NOR REPRODUCTION IN WHOLE OR PART MA
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF
PROCESS CONNECTION 94.5 W/ HEX NIPPLE & PIPE KIT OPTIONS
OPTIONAL 3.72 TITLE
EO NUMBER: 5195 DRAWING NUMBER REV
1/4 OR 1/2 NPTM DIMENSION DRAWING 4/54 LC
119.4 0090399 5 PROCESS CONNECTION W/HEX NIPPLE & PIPE KIT OPTIONS
SCALE: 0.75
4.70 SHEET 1 OF 1
DWG SIZE
OPTIONAL DRAWING NUMBER
DO NOT SCALE PRINT B EO NUMBER: 5195
Model Name: 0090399.ASSEM/4/0+ SCALE 0.25 0090456
Reset Form SCALE: 0.25
SHEET 1 OF 1
DO NOT SCALE PRINT
108.0
4.25
TYP ELECTRICAL
*200.2 CONNECTION
7.88 3/4 NPTF STD
1/2 NPTF OPT
K MITCHELL
MOUNTING PRODUCT CERTIFICATION DRAWING CHECKED BY
HARDWARE ALL DIMENSIONS ARE ±1/16 IN
M SMITH
UNLESS OTHERWISE SPECIFIED ENGINEER APPROVAL
MM
LINEAR = S ROOS
IN
DATE
19 NOV 2012
A THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
TITLE
Designators: LC SC
Model Name: 0090408.ASSEM/***/***
Reset Form
Piston Numbers 5, 6, 9, 1, 56
SC shown. LC identical except right-hand electrical connection only.
*Refer to Dimensions table on page 19 for changes in length due to process connection size, including A dimension.
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 27/32
Pressure and Vacuum
Switches Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
*184.9 *183.6
7.28 1/4 NPTF7.23 DETAIL 2 NPTF
FLUSHING PROCESS CONNECTION DETAIL 1 NP
PORT SCALE 0.25 PROCESS CONNE
SCALE 0.2
*116.7 14685 W 105TH ST LENEXA, KS 66215 USA
*115.3
913-888-2630 5.2 14685 W 105TH ST LENEXA, KS 66
4.59 4.54 SORINC.COM 0.20 913-888-2630
ISO-9001
DRAWN BY ISO-9001 SORINC.COM
*77.3 *76.0 K MITCHELL DRAWN
3.04 2.99 DRAWING
PRODUCT CERTIFICATION CHECKED BY K MIT
ALL DIMENSIONS ARE ±1/16 IN PRODUCT CERTIFICATION DRAWING
M SMITH CHECKED
UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE ±1/16 IN
ENGINEER APPROVAL M SM
MM UNLESS OTHERWISE SPECIFIED
LINEAR = S BOAL MM
ENGINEE
IN LINEAR =
DATE
IN S BOA
07 JUN 2011 DATE
88.9
141.3 3.50 22.2
5.56 0.88
70.6
2.78 9.8
(TYP) 2X 7.9 HOLES 0.39
0.31 (TYP)
FOR MOUNTING
HARDWARE
*185.7
7.31
ELECTRICAL
CONNECTION
*115.0 3/4 NPTF(STD)
4.53 1/2 NPTF(OPT)
OR PLUGGED(OPT)
*75.6 (TYP 3)
2.98
CONNECTION L BROWN
PRODUCT CERTIFICATION DRAWING CHECKED BY
1/4 OR 1/2 NPT ALL DIMENSIONS ARE 1/16 IN
M SMITH
MALE PROCESS CONNECTION UNLESS OTHERWISE SPECIFIED
39.1 MM
ENGINEER APPROVAL
04-11-2017
3.09 CONN SIZE 1, 5, 6, 9, 56 2, 3
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
(TYP) 14.0 NO USE WHATSOEVER OF THE INFORMATION CONTAINED
0090153
REV
B
Model Name: 0090153.ASSEM\8.2\2017-APR-11 10:16
Reset Form
*Refer to Dimensions table on page 19 for changes in length due to process connection size,
including A dimension.
28/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
Explosion Proof
SALES PAGE
MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER #
SALES PAGE 1 DIMENSION APPROXIMATE AND BAS
MODEL # SALES ORDER # LINE ITEM # PURCHASE ORDER # 150.1 1 ON A FIVE THREAD ENGAGEMENT
DIMENSION APPROXIMATE AND BASED 5.91
1 ELECTRICAL
150.1 ON A FIVE THREAD ENGAGEMENT HOUSING
75.1 CONNECTION
5.91 110.3 50.8
ELECTRICAL 2.95 3/4 NPTF STD
75.1 110.3 11.9 HOUSING 4.34 2.00
CONNECTION B3 & B6 1/2 NPTF OPT
2.95 4.34 0.47 80.0 35.3
3/4 NPTF STD LH & RH
80.0 35.3 3.15 1.39
B3 & B6 1/2 NPTF OPT M20 X 1.5 F
3.15 1.39 LH & RH B4 & B5
40.0 9.5 LH & RH
40.0 9.5 M20 X 1.5 F 1.58 0.38 3/4 PFF
1.58 0.38 B4 & B5 J4
LH & RH RH ONLY
3/4 PFF
J4 PROCESS
RH ONLY LENGTH
CONNECTION SIZE
PROCESS PIPE KIT
LENGTH A 1/4 NPTM 29.7
CONNECTION SIZE MOUNTING
EXTERNAL SHOWN 1.17
GROUND ELECTRICAL 1/4 NPTM 29.7 BRACKET
SHOWN 1.17
EXTERNAL OPTIONAL 38.9
LUG CONNECTION 1/2 NPTM
SEE CHART
GROUND LUG 1.53
38.9
1/2 NPTM
1.53 PROCESS
* LENG
CONNECTION SIZE
PROCESS 41.2
41.2 1.62 * LENGTH
CONNECTION SIZE 2X 9.1
1.62 1/4 NPTF, BSPF, PTF SHOW
2X 9.1 0.36 71.4
1/4 NPTF, BSPF, PTF SHOWN MOUNTING 2.81
0.36
MOUNTING HOLES 1/2 NPTF, BSPF, PTF SHOW
*227.7 28.6
*227.7 HOLES 1/2 NPTF, 8.96
BSPF, PTF SHOWN 1.13
8.96 33.4 ELECTRICAL
1.32 CONNECTION
1/4 NPTF 5.6
1 NPTF, BSPF, PTF ADD SEE CHART
VENT 0.22
CONNECTION 2 NPTF 25.4 33.4
LH & RH ADD 1.32
SEE DETAIL 1.00 4X 9.5 14685 W 105TH ST LENEXA, KS 6621
*122.5 0.38 913-888-2630
*122.5 14685 W 105TH ST LENEXA, KS 66215 USA
26.6 4.82
913-888-2630 MOUNTING HOLES 26.6 ISO-9001
SORINC.COM
4.82 1.05 SORINC.COM 1.05 DRAWN BY
ISO-9001
35.7 K MITCH
DRAWN BY
1.41 1/4 NPTF PRODUCT CERTIFICATION DRAWING CHECKED BY
K MITCHELL ALL DIMENSIONS ARE 1/16 IN
PRODUCT CERTIFICATION DRAWING VENT CONNECTION M SMITH
ALL DIMENSIONS ARE 1/16 IN
CHECKED BY
71.4 UNLESS OTHERWISE SPECIFIED
M SMITH LH & RH MM
ENGINEER APP
UNLESS OTHERWISE SPECIFIED 2.81 LINEAR = S BOAL
MM
ENGINEER APPROVAL IN
LINEAR = S BOAL DATE
IN 01 JUN
DATE
05 JUN 2015
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR.
A1 NO USE WHATSOEVER OF THE INFORMATION CONTAINED
HEREON, NOR REPRODUCTION IN WHOLE OR PART MAY BE
MADE WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR.
TITLE
Drawing 0090882
DRAWING NUMBER REV
OPTIONAL EO NUMBER: 5248
0090882 6
SCALE: 0.65 DWG SIZE
SHEET 1 OF 1
DO NOT SCALE PRINT B
Piston Numbers 5, 6, 9, 1, 56
*Refer to Dimensions table on page 19 for changes in length due to process connection size,
including A dimension.
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 29/32
Pressure and Vacuum
Switches Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
Drawing 0090271
Designators: RB Manual Reset
Piston Numbers 5, 6, 1, 9, 56
*Refer to Dimensions table on page 19 for changes in length due to process connection size,
including A dimension.
30/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.
Pressure and Vacuum
Switches Dimensions
Dimensions in this catalog are for reference only. They may be changed without notice. Contact the factory for
certified drawings for a particular model number.
80.8
3.18
TYP
*209.5
8.25 40.4
1.59
TYP
21 NOV 2017
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF SOR, INC.
NO USE WHATSOEVER OF THE INFORMATION CONTAINED HEREON,
NOR REPRODUCTION IN WHOLE OR PART MAY BE MADE
WITHOUT THE EXPRESS WRITTEN PERMISSION OF SOR, INC.
A
Drawing 0090169
TITLE
Piston Numbers 5, 6, 1, 9, 56
Model Name: 0090169.ASSEM\6.1\2017-NOV-21 17:31
Reset Form
*Refer to Dimensions table on page 19 for changes in length due to process connection size,
including A dimension.
Form 216 (01.19) ©SOR Inc. SORInc.com | 913-888-2630 | Registered Quality System to ISO 9001 31/32
SOR Inc. | Lenexa, KS USA | 913-888-2630 | Fax 913-888-0767 | SORInc.com
REGIONAL OFFICES
China Middle East
SOR China | Beijing, China | china@SORInc.com SOR Measurement & Control Equipment Trading DMCC | Dubai, UAE
+86 10 5820 8767 | Fax +86 10 58 20 8770 middleeast@SORInc.com | +971 4 278 9632 | Fax +913 312 3596
32/32 Registered Quality System to ISO 9001 | 913-888-2630 | SORInc.com Form 216 (01.19) ©SOR Inc.