Professional Documents
Culture Documents
Requirements
2 Lenses
Glue gun
Masking tape
Procedure :
2. Make sure that you test your lens on how far can it focus an image. So that you will know how long
and wide will your plastic tube is.
3. Get your first lens and place it inside (1 inch) in the first end of the plastic tube.
4. Make sure it is placed properly and tape it into position with your masking tape.
5. Once it is properly taped, use a glue gun to stick the lens to the first end.
6. Do the same with the second lens to the other end of your plastic or paper tube.