Professional Documents
Culture Documents
5_DynamicProperty Homework
6.某带壁柱墙房屋,横墙间距为 20m,采用钢筋混凝土大型屋面板屋盖体系,
屋盖下弦标高为 5.0m,基础标高为-0.45m。承重带壁墙的尺寸如图所示,已计
算得截面面积 A=956500mm²,截面惯性矩 I=9.644×10⁹mm4 ;采用 MU10 烧结
普通砖和 M5 混合砂浆砌筑。试验算带壁柱纵墙高厚比是否满足要求?
A house with pilaster wall has a spacing of 20m between transverse walls and adopts
a large reinforced concrete roof slab roof system. The bottom chord elevation of the
roof is 5.0m and the foundation elevation is -0.45m .. The size of the bearing wall
with wall is shown in the figure. The calculated cross-sectional area A = 956500 mm
and the cross-sectional moment of inertia I = 9.644× 10 mm4. MU10 sintered
common brick and M5 mixed mortar are used for masonry. Does the height-thickness
ratio of longitudinal wall with pilaster meet the requirements?
Answer: