Professional Documents
Culture Documents
Crane10
"Crane Supports Numbering:" Spp
Vector assignments & units: "Crane support "X" coordinate:" Xp1 := 1 Xp Xp1
Crane1 := ft
"Crane support "Y" coordinate:" Yp1 Crane12 Yp Yp1
Xcc 0
Location of Center of Load Input and Crane Rotation - CLI: := ft
Ycc 0
2
Yp1
0
Ycc
-2
-4
-4 -2 0 2 4
Xp1 , Xcc
Crane Fixed Loads. Coordinates respect Center of Load Input and Crane Rotation - CLI:
Crane Data Reference: TECHRANE F25-60. No Boom Selweight load (3) provided.
Future Support Structure Selfweight load (1) ussumed as 30000 lb. No data provided.
Supposed Selfweight excentricity: 15.78 ft
Crane20
"Crane Load Numbering:" CLn
1
"Load"
CL1 := Crane2 CL CL1 lb
Vector assignments & units:
"Crane Load "X" Coordinate" CLx1 CLx := CLx1 ft
Crane2 2
"Crane Load "Y" Coordinate" CLy1
3 CLy CLy1 ft
Crane2
Crane Load on Hook. Capacity and Location:
Hx 60
CH := 4050 lb Location of Hook: := ft
Hy 0
2
Sum of squares of the ( Xpib - Xcc)
distances in X and Y in SumX ib SumX 33.063 2
respect to Center of Load := = ft
SumY SumY 44.444
( ib )
2
Input and Crane Rotation: Yp - Ycc
ib
HARGROVE INDORAMA Dock Rehabilitation Project Fixed Crane
Design Criteria Forces on Supports
Calculations: T
atan bx
Crane Horizontal Boom angle for analysis: α := 0
by
90 deg boom angle index: bi := 0 .. rows( α) - 1
deg
Fixed Loads: Loads and Moments around Center of Load Input and Crane Rotation - CLI:
Mx :=
bi CLil(-CLx)ilsin(αbi) + CLyilcos(αbi) Nz :=
bi CLil
il il
My :=
bi CLil(CLxilcos(αbi) - CLyilsin(αbi))
il
Reactions on Crane Supports:
Rz :=
( -Mx) Yp
bi ( ib
- Ycc ) + Mybi (Xpib - Xcc) + Nzbi
Note: Positive (+) = Compression, Negative (-) = Traction ib , bi SumY SumX ncs
Hook Load: Loads and Moments around Center of Load Input and Crane Rotation - CLI:
(
Mhx := CH -Hx sin α
bi ( bi) + Hycos(αbi) ) Nzh := CH
(
Mhy := CH Hx cos α
bi ( bi) - Hysin(αbi) )
Reactions on Crane Supports:
Note: Positive (+) = Compression, Negative (-) = Traction
Rzh :=
-Mhx Yp
bi ( ib
- Ycc ) + Mhybi (Xpib - Xcc)
ib , bi SumY SumX