You are on page 1of 8

PCC has acquired ASME Certificate and U/NB Stamp

Process Flow and Program Process Flow and Program


Universal Modular Flared Gas Recovery Universal Modular Flared Gas Recovery

Flared Gas Recovery System FGRS Complete Flow Chart CO 2 H 2O

Boost Gas De Acid Gas


Associated Gas FGU GSU DHU
Purifying Gas
Product
Usage
Pipeline Gas
LPG Generate
Feed Gas Rich Ethane
FG
HRU HSU HC
Electricity

BIO Gas Fuel


Rich Methane
Co2 Dioxide
N2 Drive
Flash Steam
Coal Bed Methane
LQU NRU LNG
Environmental
Protection

Modular FGRS Catalogue

ITEM F30K F60K

Plant Capacity 30,000Nm³/d 60,000Nm³/d

Inlet Pressure 2-4barg 2-4barg

Cooling Water Rate 1608t/d 3216t/d

Thermal Oil Duty 203kW 406kW

FGRS Refrigerants Duty 238kW 476kW

Consumed Work 375kW 750kW


LNG Production
Socio-economic benefits of 26,832Nm3/d 53,640Nm3/d
Capacity
the Gas Flare Commercialisation
ITEM F100K F150K

Plant Capacity 100,000Nm³/d 150,000Nm³/d

Inlet Pressure 2-4barg 2-4barg

Cooling Water Rate 5280t/d 7880t/d

Thermal Oil Duty 667kW 995kW

Refrigerants Duty 782kW 1167kW

Consumed Work 1232kW 1782kW


LNG Production
HRU 88,099Nm3/d 131,477Nm3/d
Capacity

- 0 5- - 0 6-
FEED GAS

FEED GAS P.GAS

INPUT OUTPUT

FEED GAS: Feed gas contained acid gas SWEET GAS: Treated gas without acid gas

DW: Desalted water is used to make up


CO2 : Removal of CO2 from feed gas
water

CW: Cooling water is used to cool fluids DR: Drainage

N2: Nitrogen is used to maintain


VT: Vent
regenerated system pressure
LTO: Low thermal oil is used to provide heat
duty of amine regenerator.

PW: Power is used for rotating equipment.


VT
DR VT

FEED GAS
FEED GAS DHU DRY GAS

HTO CW
INPUT OUTPUT

INPUT OUTPUT FEED: Qualified gas exported from gas RC1: Demethanizer overhead vapor.
treatment section. RC2: Deethanizer overhead vapor.
FEED GAS: Typically comes from exported DRY GAS: Gas contained water content less
gas of GSU. 1ppm. ETH: Ethylene with vaporized temperature at
NGL: Natural gas liquid mainly contained C3+
-80 oC is used to provide condensate duty for
CW: Cooling water is used to cool fluids DR: Drainage hydrocarbon.
demethanizer and deethanizer.

HTO: High thermal oil (260oC) is used to LTO: Lowthermal oil is used to provide heat
VT: Vent VT: Vent.
provide heat duty for stripper. duty for deethanizer.
INPUT
FEED : Pretreated natural gas ( CO 2 = 50ppm, BOG: Boil-off gas produced from storage and
water = 1ppm) deliver of LNG

N2: Nitrogen is used to seal cold box. PW: Power is used for rotating equipment.

ETH: Ethylene with vaporized temperature at


CW: Cooling water is used to cool fluids.
-80 oC.
R22: Chlorodifuoromethane with vaporized
temperature at -40 oC.
OUTPUT
LNG: Liquid natural gas product. W.BOG: Warm boil-off gas

VT :Vent

VT

FEED GAS LNG

BOG
LQU
W.BOG

N 2 PW CW ETH R22

You might also like