Professional Documents
Culture Documents
1. To call the Line tool from the command line, the following abbreviation can be entered:
(a) lin b) li (c) l (d) ln.
2. To call the Line tool from the command line, the following abbreviation can be entered:
(a) lin b) li (c) l (d) ln.
3. The command line abbreviation for the Circle tool is:
(a) cir (b) c (c) ci (d) cl.
4. The Join tool can be used for joining:
(a) Any two arcs (b) Only arcs or lines in line with each other (c) Any two lines or plines
(d) Any objects can be joined to each other.
5. The “style name” of a text refers to:
(a) The font in use
(b) The height of the text
(c) Whether the text is in bold, italic or regular;
(d) Whether the text is AutoCAD SHX or Windows True Type.
6. If a layer is locked:
(a) Details can be added to a locked layer
(b) Details can be erased from a locked layer
(c) Details cannot be added or erased from a locked layer
(d) Details can be added to a locked layer but they disappear when the drawing file is saved.
7. When a layer is turned off:
(a) File space is saved when saving the file
(b) It makes no real difference. Details can still be added to the layer
(c) Details cannot be erased from the layer
(d) Details on the layer cannot be seen.
8. When using the Extrude tool which of the following can be extruded?Except
(a) Regions (c) Circles (d) Closed plines (e) Ellipses
9. How many points do you need to define for the rectangle command?
a) One b. Two c. Four d. None
10. Which keystrokes will UNDO a command
a) Control+U
b) Alt+U
c) Control+Z
d) Alt+Z
11. Which one of these will NOT start the Print command?
a) Typing PLOT
b) Typing PRINT
c) Pressing Control+P
d) Pressing Alt+P
12. The extension for AutoCAD drawing file is
a) DWG
b) DWT
c) DWF
d) DXF
13. What is the keyboard shortcut for saving AutoCAD drawing
a) CTRL + S
b) SHIFT + S
c) ALT + S
d) CTRL + ALT + S
14. What is the keyboard shortcut for saving AutoCAD drawing
a) CTRL + S
b) SHIFT + S
c) ALT + S
d) CTRL + ALT + S
a) less than 80
b) A can be any value
c) more than 80
18. If the following rectangular array were to be created from figure 1 to figure 2, what would X and Y be?
Figure 1 Figure 2
a) 20 and 20
b) 25 and 25
c) 30 and 30
19. What should you pay attention to when learning AutoCAD?
a) the command Line
b) The status bar
c) The title bar
d) Tool icon
20. When using the TRIM command, which do you select first ?
a) the cutting edges
b) The object to be trimmed
c) Everything
d) Nothing
23. To call the Line tool from the command line, the following abbreviation can be entered:
(a) lin b) li (c) l (d) ln.
24. To call the Line tool from the command line, the following abbreviation can be entered:
(a) lin b) li (c) l (d) ln.
25. The command line abbreviation for the Circle tool is:
(a) cir (b) c (c) ci (d) cl.
26. The Join tool can be used for joining:
(a) Any two arcs (b) Only arcs or lines in line with each other (c) Any two lines or plines
(d) Any objects can be joined to each other.
27. The “style name” of a text refers to:
(a) The font in use
(b) The height of the text
(c) Whether the text is in bold, italic or regular;
(d) Whether the text is AutoCAD SHX or Windows True Type.
28. If a layer is locked:
(a) Details can be added to a locked layer
(b) Details can be erased from a locked layer
(c) Details cannot be added or erased from a locked layer
(d) Details can be added to a locked layer but they disappear when the drawing file is saved.
29. When a layer is turned off:
(a) File space is saved when saving the file
(b) It makes no real difference. Details can still be added to the layer
(c) Details cannot be erased from the layer
(d) Details on the layer cannot be seen.
30. When using the Extrude tool which of the following can be extruded?Except
(a) Regions (c) Circles (d) Closed plines (e) Ellipses
31. How many points do you need to define for the rectangle command?
b) One b. Two c. Four d. None
32. Which keystrokes will UNDO a command
e) Control+U
f) Alt+U
g) Control+Z
h) Alt+Z
33. Which one of these will NOT start the Print command?
d) Typing PLOT
e) Typing PRINT
f) Pressing Control+P
g) Pressing Alt+P
What should you pay attention to when learning AutoCAD?
e) the command Line
f) The status bar
g) The title bar
h) Tool icon
(B) Smaller