Desarmado y Armado
been 01/12/2014
Camshaft - Install
sMes- 1210-012
Installation Procedure
Table
Required Tools
Tool Part Number __ Part Description | Qty
201-4211 Camshaft Pilot 1
AEE.
201-4212 (Camshaft Pilot
aeration sotorio42
1. Install Tooling (A)
ri6n-05/12/2016
Note: Ensure that camshaft (2) and Tooling (A) ae clean. Apply clean engine ol to the lobes and journals of camshaft (2) and Tooling (A)
‘Note: During installation of eamshalt (2), rotate the camshef
2, Carefully install camshaft (2) nthe engine
NOTICE,
the camshaft, make sure the number one eylinder i at
both directions inorder to prevent binding inthe camshaft bearing bores
the fywheeL The camshaft timing is very important. The timing mark
‘onthe camshaft drive year must lineup withthe ming mark on the
idler gear. Refer to the Specifications Manual for more information.ss 20a nC BINSEWES-€9 Dononss apm aim ACUNMEENARS- 49 -Dommemeen
«Install the rocker shaft and the pushrods, Refer to Disassembly and Assembly, "Rocker Shaft and Push - Install
tesa tinea pt papipheineannetae Snes sh eee enc pth