This document contains an exam for a structures course with questions about calculating centroids and moments of inertia for basic structural shapes like L-sections, hollow circles, I-sections, as well as concepts like retaining wall analysis, working stress method, foundations, and moment of inertia. Students are instructed to answer 6 of the 10 questions, with Section A being compulsory and answering no more than 2 questions from Sections B, C, or D.
This document contains an exam for a structures course with questions about calculating centroids and moments of inertia for basic structural shapes like L-sections, hollow circles, I-sections, as well as concepts like retaining wall analysis, working stress method, foundations, and moment of inertia. Students are instructed to answer 6 of the 10 questions, with Section A being compulsory and answering no more than 2 questions from Sections B, C, or D.
This document contains an exam for a structures course with questions about calculating centroids and moments of inertia for basic structural shapes like L-sections, hollow circles, I-sections, as well as concepts like retaining wall analysis, working stress method, foundations, and moment of inertia. Students are instructed to answer 6 of the 10 questions, with Section A being compulsory and answering no more than 2 questions from Sections B, C, or D.
Q. 5 Calculate the centroid of L-section of size 150*150*12
Course: B.Arch Semester: 2nd mm. Sub. : Structures in Architecture-II Sub. Code: ART- Q. 6 Calculate the moment of inertia of hollow Circle: Batch:2015/16 156/176 Time Allowed: 3 Hours Maximum Marks :50 Type: Reap. (Session External Diameter 40 mm Even 2019-20) Note: 1. Attempt six questions only. Internal Diameter 25 mm Q. 7 Calculate the moment of inertia of I-section have the 2. Question no. 1 is compulsory with 5 short questions. (Answer to each part should be between 50-60 words) following properties: 3. Attempt five questions from Sections- B, C & D, but not more than Top Flange= 150*20 mm two questions from each sections.(Each Answer should be between 250-300 Web=15 * 150 mm words) Section – A (Compulsory) (5X2=10) Bottom Flange= 300*30 mm Q. 1 Explain working stress method. (a) Section – D(8 Marks Each) (b) Define foundations. (c) Q. 8 Calculate the moment of inertia of I-section have the Define Brick Masonry. (d) following properties: Explain the purpose of Retaining Wall. (e) Top Flange= 180*20 mm Explain Moment of Inertia. Web=15 * 180 mm Section – B(8 Marks Each) Q. 2 Bottom Flange= 180*30 mm Calculate the Centroid of I-section have the following Q. 9 Explain the concept of retaining wall analysis. properties: Q.10 Explain the method of moments and also derive the Top Flange= 195*25 mm relation for centroid. Web=25 * 120 mm Bottom Flange= 235*15 mm Q. 3 Explain the difference between working stress and limit state method. Q.4 Explain the theorem of Parallel Axis.