Professional Documents
Culture Documents
PIN A PIN B
+ –
Technical specifications
Nominal sensitivity,
main axis: 10 mV/m/s2 * =100 mV/g
Transverse sensitivity: max. 10% Measuring cable
46105-L / 46106-L
Base strain sensitivity: 0.01 m / s2 / µ strain typical
Linear frequency range: 2 Hz to 10 kHz (± 1 dB)
Mounting base
Max. peak acceleration: 600 m / s2 = 60 g 15757 (M8) /
Settling time: 3 sec 15802 (UNF 1/4") /
Bias point: 10 to 13 V (typical 12 V) 17769 (M6)
Temperature range: – 40° to +125 °C (– 40° to 257 °F) ø15
Power requirements: 24 V, 2 to 5 mA
Isolation: case isolated, > 10 Mohm
Casing: stainless acid proof steel Sandvik
1802, EN:1.4523
Sealing: IP66/67 M8=6.9 min. 30 t
Thread (t): M6 x 1.0, M8 x 1.25 or UNF 1/4"- UNF=5.5
28 M6=5.0
Torque limit: 10 Nm (7.4 lbf . ft)
max. 0.7
min. 10
SPM Instrument AB • Box 504 • SE-645 25 Strängnäs • Sweden Technical data are subject to change without notice.
Tel +46 152 22500 • info@spminstrument.se • www.spminstrument.com ISO 9001 certified. © Copyright SPM 2017-09. TD-508 B Rev.0