Professional Documents
Culture Documents
CLF 054-Determination of Electrical Conductivity
CLF 054-Determination of Electrical Conductivity
Approved by:GM/QM
Date:16.02.2020
CLF-054
Determination of electrical conductivity
Standard methods for the examination of water and wastewater 23rd edition 2510B Laboratory Method
QUALITY CONTROL
Calibration Standard Lot # Expiry date Tolerence Value observed CAL PASS/FAIL
Verfication
Verification Standard Lot # Expiry date Value obtained
Plot in accuracy control PASS/FAIL
chart
Depending on conductivty range select the calibration solution .Rinse probe in distilled water,then rinse with a small amount of calibration standard .Dip the
probe into the calibration standard .Stir the probe gently to create a homogenous sample.Wait for the measured conductivity value to stabilize Press
CAL/MEAS to enter conductivity calibration mode.Press up or down arrow to change the value on the display to match the value of calibration
standard.Press ENTER to confirm .
ANALYSIS OF SAMPLE
PASS/FAIL
Control charts
Tested by : Reviewed by :
Ref #.
C/V Date