Professional Documents
Culture Documents
To combine more than one region into a single region, use the BOOLEAN
operation:UNION
To represent a circular hole in a 2D isometric view, use the _______ option in the
ELLIPSE command.isocircle
Select the area to allow Quick Select to filter for LINE objects in the drawing.A
A __________is like a snapshot of the existing layers and layer settings at the time it is
created.layer state
What are the DRAWORDER options available from the Modify panel on the ribbon?
Select all that apply.bring leaders to the front is correct
You want to use MATCHPROPERTIES to change all the text to use the same text
style and layer. Which area do you select? Select all that apply.d is correct
In order to access the settings for MATCHPROP: type match prop select an object
right click and settings
How do you remove objects from a selection set? Press and hold shift key
This tool allows you to control which layers are displayed in the layer drop-down
list.Layer properties
You want to change the color of the mark ups layer in the current viewport only
using a layer override. Select the letter o f the correct control to use. B
Select the letter of the correct tool used to initiate the LAYER WALK command.
Select the letter of the correct tool for applying the oblique option to a dimension.
To create a dashed line that precisely connects the two point objects, which object
snap should you use? Node
To insert a special character from a character map into a text object, which area do
you select?a
To create fillets without trimming the corner(s), which option do you select?No
trim
To move several objects, you enter MOVE and select a line, a circle, an arc, and a
text object, in that order. At the next “Select objects” prompt, you enter U. What
does this do?
After carefully selecting 20 objects, you realize that you selected one in error.
What’s the best solution?c. press and hold shift and select the object that you
want to deslect
There are several blocks named K-1054 in your current drawing. If you create a
new block with the same name but with a different appearance, what will happen?
An xref layer property override occurs: when you change a layer property for an
xref in host drawing
To add angles to the Polar Tracking list, place the steps in the correct order:
Enter dsettings, select the polar tracking tab, select new on the polar tracking tab
and enter desired angle
You want to rotate the chair on the left, so it looks like the chair on the right (parallel to
the desk). Pick the point on the chair that should be used as the basepoint.D
Select the area on the ribbon to access preset orientations for different user
coordinate systems.c
You need to move the existing circle to a new location that’s half the total length
and half width X. What’s the fastest way to locate the second point, the new center
of the circle? Use the midbetween two points object snap
Select the method which will align the UCS with the WCS:ucs world
You are creating a kitchen elevation. You bring a CAD block of a cabinet into the
drawing, but it is too small. Which scale option will quickly enlarge the cabinet?
Reference
The arc on the left needs to be modified so that it looks like the arc on the right.
Which method would work best?use the lengthen command
Which of the following statements are true about grips? Select all that apply.
Grips on block, press enter or spacebar you can selct and move grips
Which object are you able to add vertices to or remove them from?polyline
After you select the endpoint of an arc, what multi-grip options are available?
Select all that apply.stretch lengthen
After you select the vertex of a six-sided polygon, what multi-grip options are available?
Select all that apply.
The Page Setup Manager allows you to set all of the following EXCEPT:the layout
name
The Page Setup Manager allows you to preview your plot before you print it out.A
To create a corner between two perpendicular lines: fillet select one lineshift select
The two types of plot style tables are:color dependent and named
Items displayed in red by the Drawing Compare tool:are not in the current drawing
If you don’t assign a text height to a text style:you wll be prompted for the text
height everytime
To insert symbols from a character map into multiline text:Copy andpase the
character map
When a field is inserted into text, it uses ______________.The same text style
If the SPELLCHECK tool can’t provide a correct spelling for a word:You cantype in
the correction
You create a dimension style and then place some dimensions. You then modify
the dimension style. Any dimensions using that dimension style will automatically
update.true
To ensure dimensions are always placed on the correct layer, you can specify
which layer to use by selecting in this area.C
You use the DIMBREAK tool to create the dimension breaks shown. What controls
the amount of gap applied?the dimension style
How do you maintain consistent spacing between dimensions? Use the dimspace too
You are working in a drawing. You select the bottom grip of a dimension as shown
and move the extension line to the left. How does this affect the selected
dimension?
The extension line adjusts tot he new location and dimension value updates
How do you maintain consistent spacing between dimensions?
Use the dimspace tool
To ensure dimensions are always placed on the correct layer, you can specify
which layer to use by selecting in this area.C
You hover over a dimension and see this symbol displayed. What does this
symbol represent?the dimension is annotative
What occurs if an external reference is attached as an overlay and you then use
the host drawing where the overlay is attached as an external reference?the
overlay external reference is not included with the hosts file
The layer names for an external reference are changed if the external reference is
inserted into the host drawing as a BIND. How are they changed? $0$ character
replace the bar symbol
You have a drawing with several blocks in it. You want to create a tool palette with
the blocks in the drawings. What is the fastest and easiest way to do this using the
Autodesk Design Center?
Launch the design center, locate the drwaing select the blocks folder
You select objects in Drawing A. You right-click and select Copy with Basepoint.
You specify a basepoint. You switch to Drawing B. You right-click and select Paste
as Block. What is the result?the selected elements are placed as an unnamed
block
What does the Group Manager allow you to do? Select all that apply.Modify a
group
Which of the following can hyperlinks be linked to? Select all that apply.Views
inside a drawing layout tabs an existing file