The hypervisor logs show that a Cisco 3640 router VM named R3 was created, configured with IOS and startup configuration files, and network interfaces were bound to UDP ports for connectivity. The ghost image file was loaded successfully and R3 was started and ran until it was shut down and destroyed.
The hypervisor logs show that a Cisco 3640 router VM named R3 was created, configured with IOS and startup configuration files, and network interfaces were bound to UDP ports for connectivity. The ghost image file was loaded successfully and R3 was started and ran until it was shut down and destroyed.
The hypervisor logs show that a Cisco 3640 router VM named R3 was created, configured with IOS and startup configuration files, and network interfaces were bound to UDP ports for connectivity. The ghost image file was loaded successfully and R3 was started and ran until it was shut down and destroyed.
Oct 27 14:42:16.335 HYPERVISOR: Started on IP = 127.0.0.1, TCP port = 7202. Oct 27 14:42:16.615 HYPERVISOR: exec_cmd: hypervisor version Oct 27 14:42:16.615 HYPERVISOR: exec_cmd: hypervisor uuid Oct 27 14:42:16.615 HYPERVISOR: exec_cmd: hypervisor working_dir D:\GNS3\PROJECTS\NEW-LAB\NEW-LAB-files\dynamips Oct 27 14:42:16.615 GENERAL: working_dir=D:\GNS3\PROJECTS\NEW-LAB\NEW-LAB- files\dynamips Oct 27 14:42:16.615 HYPERVISOR: exec_cmd: vm create R3 3 c3600 Oct 27 14:42:16.631 VM: VM R3 created. Oct 27 14:42:16.631 HYPERVISOR: exec_cmd: vm set_con_tcp_port R3 2002 Oct 27 14:42:16.631 HYPERVISOR: exec_cmd: vm set_aux_tcp_port R3 2503 Oct 27 14:42:16.631 HYPERVISOR: exec_cmd: c3600 get_mac_addr R3 Oct 27 14:42:16.631 HYPERVISOR: exec_cmd: vm set_ios R3 D:\GNS3\IMAGES\IOS\c3640- jk9o3s-mz.124-12a.image Oct 27 14:42:16.631 HYPERVISOR: exec_cmd: vm set_sparse_mem R3 1 Oct 27 14:42:16.631 HYPERVISOR: exec_cmd: vm set_ram_mmap R3 1 Oct 27 14:42:16.631 HYPERVISOR: exec_cmd: vm set_ghost_status R3 2 Oct 27 14:42:16.631 HYPERVISOR: exec_cmd: vm set_ghost_file R3 c3640-jk9o3s-mz.124- 12a.image-192.ghost Oct 27 14:42:18.519 HYPERVISOR: exec_cmd: vm set_config R3 configs/i3_startup- config.cfg Oct 27 14:42:18.519 HYPERVISOR: exec_cmd: vm get_status R3 Oct 27 14:42:18.519 HYPERVISOR: exec_cmd: vm slot_add_binding R3 0 0 NM-4E Oct 27 14:42:18.519 HYPERVISOR: exec_cmd: vm get_status R3 Oct 27 14:42:18.519 HYPERVISOR: exec_cmd: vm get_status R3 Oct 27 14:42:18.519 HYPERVISOR: exec_cmd: vm slot_add_binding R3 1 0 NM-4T Oct 27 14:42:18.519 HYPERVISOR: exec_cmd: vm get_status R3 Oct 27 14:42:18.519 HYPERVISOR: exec_cmd: vm get_status R3 Oct 27 14:42:18.519 HYPERVISOR: exec_cmd: vm set_idle_pc R3 0x604ff0e0 Oct 27 14:42:18.565 HYPERVISOR: exec_cmd: nio create_udp_auto nio_udp_auto3 127.0.0.1 10001 20000 Oct 27 14:42:18.565 HYPERVISOR: exec_cmd: nio create_udp_auto nio_udp_auto4 127.0.0.1 10001 20000 Oct 27 14:42:18.612 HYPERVISOR: exec_cmd: nio connect_udp_auto nio_udp_auto3 127.0.0.1 10003 Oct 27 14:42:18.612 HYPERVISOR: exec_cmd: vm slot_add_nio_binding R3 0 0 nio_udp_auto3 Oct 27 14:42:18.612 HYPERVISOR: exec_cmd: vm get_status R3 Oct 27 14:42:18.628 HYPERVISOR: exec_cmd: nio connect_udp_auto nio_udp_auto4 127.0.0.1 10006 Oct 27 14:42:18.628 HYPERVISOR: exec_cmd: vm slot_add_nio_binding R3 1 0 nio_udp_auto4 Oct 27 14:42:18.628 HYPERVISOR: exec_cmd: vm get_status R3 Oct 27 14:42:27.757 HYPERVISOR: exec_cmd: vm get_status R3 Oct 27 14:42:27.757 HYPERVISOR: exec_cmd: vm start R3 Oct 27 14:42:27.757 GHOST: loaded ghost image c3640-jk9o3s-mz.124-12a.image- 192.ghost (fd=16) at addr=0xf1430000 (size=0xc000000) Oct 27 14:42:27.757 GHOST: loaded image c3640-jk9o3s-mz.124-12a.image-192.ghost successfully. Oct 27 14:42:59.911 HYPERVISOR: Stopped. Oct 27 14:43:00.004 GHOST: unloaded ghost image c3640-jk9o3s-mz.124-12a.image- 192.ghost (fd=16) at addr=0xf1430000 (size=0xc000000) Oct 27 14:43:00.145 VM: VM R3 shutdown. Oct 27 14:43:00.145 VM: VM R3 destroyed. Oct 27 14:43:00.176 GENERAL: reset done.