Professional Documents
Culture Documents
Chemipol is a chemical company established in 1979, manufacturer and supplier of a wide range of biocides,
additives and process chemicals.
We provide innovative technologies, highly effective products and expert support services through specialized technical sales
groups with outstanding expertise in customer point of view.
Commercial offices:
Egypt (El Cairo) – Middle East
China (Shanghai) – China
Mexico (Queretaro) – Mexico
Chemipol supplies preservatives, formulation additives and process additives to the following sectors:
Metalworking Coatings
CHALLENGE TEST
Inoculum:
UNE 11930 STANDARD (1 Million of microorganism for each sample tested)
gram +(S. aureus), gram – (E. coli and P. aeuroginosa), fungi (A.niger) and yeast (C. albicans).
CCT (COSMETIC CHALENGE TEST) (Between 10-20 Million of microorganism on each sample tested)
A mixture culture of gram + (S. aureus), gram – (E. coli and P. aeuroginosa), fungi (A.niger) and
yeasts (C. albicans).
Incubation:
UNE 11930 STANDARD
Individual incubation and counting.
CCT
Mixture incubation and counting (more actual)
Count:
UNE 11930 Readings after 7, 14 and 28 days, independent count
CCT Strike after 7 days for each 4 inoculation, pool count
Preservative testing
CHALLENGE TEST
Result assessment CCT
Bacteria
-- Heavy growth (x > 106) No Log red
- Moderate growth (106 > x > 104) < 2,5 Log red
+ Well preserved (UNE&Pharma method)(104 > x > 103) > 2,5 Log red
++ Optimum value (CCT chemipol test) (x < 103) > 3 Log red
210 MIT/BIT
200
BIT
190
180
Bacillus subtilus gram + 2 40 20 170
160
c.m.i (ppm)
150
140
130
Organismes
¿ Why use CMIT/MIT?
CMIT
MIT
TOXICITY & BIODEGRADABILITY COMPATIBILITY
Sensitizing product at 15 ppm of active Excellent compatibility with detergents and
ingredient (2-3 times the m.i.c. worst case). cosmetics raw materials .Possible to use
Free CMR preservative solution. combined with other actives
Environment reduced impact
CMIT/MIT ® Unique mechanism of action
CMIT/MIT is an active with a unique method of action based in a enzymatic disruption attack
that improve inhibition of respiration ,ATP generation and the assimilation growing.
The disruption of the cellular metabolism and the accumulation of damage beyond the capacity
of the cell to repair results in cell death , this disruption action combined with electrophilic direct
attack , secondary electrophile generation and an intracellular generation of free radicals
stresses the cell´s natural radical defense mechanism .
Better response to massive contaminations that can happen with reused water.
Effectivity enhancement: they combine short term disinfection with long term preservation.
Improve and complement the activity spectra, capacity for vapour phase protection.
Improve the stability of the heterocyclic compounds, reducing labelling requirements and costs.
Products offered by CHEMIPOL
Free formaldehyde actives Formaldehyde releasers / donors
PRODUCTS Heterocyclic compounds O-formal N-formal C-methylol
CMIT/MIT BIT MIT/BIT EGHF TMAD BNPD
BIOPOL WJ X
BIOPOL JM X X
BIOPOL MSO X X
BIOPOL IB X X
BIOPOL VR X
BIOPOL XM X
BIOPOL XMT X X
BIOPOL XMB X X
SANIPOL 103 Disinfectant of specific action based on DBNPA
preservation in cosmetics
Preservatives
Organized in two wide range of products and solutions for the protection for leave-on and rinse-off cosmetic
products as innovative and classic formulations.
SENSICARE® C BIOPOL®
Low toxicity preservatives, innovative Preservatives based on classic active
solutions, based on the innovative substances.
use of existing active substances for
preservation of cosmetic products.
Chemipol’s classic preservation systems
CATEGORY
Product Face Shaving Body Sun Hair Decorative Wet
Face care Body care Hair care Hair styling
cleansing products cleansing protection cleansing cosmetics wipes
BIOPOL C 20
BIOPOL C 30
BIOPOL MI 10
BIOPOL DHN
BIOPOL DHI
BIOPOL DHK
BIOPOL DHP
BIOPOL PB 6
BIOPOL PB 17
especially recommended recommended possible
Plant hygiene
Chemipol have under the brand SANIPOL® a family of a full range of products or the plant hygiene
including cleansing products for the production facilities and sanitizing solutions for the cleaning of
cosmetic facilities. BIOCHECK® is an analysis kit for the microbiological checking of products and raw
materials.
SANIPOL® BIOCHEK®
Formulations based on different biocidal active Dip slides for microbiological control, quick and simple. It is
substances, surfactants and dispersing agents. recommended for the verification of the correct state of the
raw materials, end product and facilities.
Benefits Benefits
SENSICARE ® is an innovative range of preservatives for protection of all type of leave-on and rinse-off
products.
The range includes liquid and powder formulations combining the following active substances among
others.
SENSICARE® is a new range of preservatives based on active substances with improved eco-
toxicity.
Inspired in the microbial control technology from the food industry, Chemipol started a modern research
program to develop innovative preservatives for the personal care industry.
The objective was to decrease the amount of biocidal actives in contact with the skin while, at the same
time, ensuring optimum protection.
The successful result of this on-going research program is the preservatives range SENSICARE® based
on the concept of self-preservation and hurdle technology for the microbial control.
organic acids
microorganism.
Bacteria can inactivate this method of action neutralizing inside the
cell the protonated acid with sodium and extract the neutralized form
out of the cell being rejected by the membrane again.
boosting technology
Glyceril laurate is a mild natural based surfactant derived from glycerin and lauric
acid that boosts the antimicrobial efficacy of phenoxyethanol, acids and benzyl
alcohol by acting on the surface tension of the microorganisms’ cell membrane.
SENSICARE ® C 1000 is a liquid preservative for personal care formulations based on phenoxyethanol and
glyceril laurate.
It combines the well-known preservation properties of the phenoxytanol, with its acceptable toxicity
profile and excellent stability in personal care formulations, with the boosting capacities of the glyceryl
laurate altogether with its properties as co-emulsifier, improves rub-out and enhanced stability.
0,05%
0,00%
S. Aureus E. Coli P. Aeuroginosa C. Tropic A. Niger
SENSICARE® C 1000 usage
Dose of use
The typical use concentration of SENSICARE® C 1000 in rinse-off and leave-on products is from 0,8%
to 1,1%. The recommended dosage is below the maximum concentration authorized according to
the Cosmetics Directive 76/768/CEE.
It is especially active against gram-positive bacteria causing body odor, being recommended to
protect deodorant formulations.
Stability
SENSICARE® C 1000 is stable over a wide range of pH (up to pH 12), temperature (up to 80 ºC) and
hydrolysis. It is stable protecting inverse emulsions, direct emulsions and water soluble products.
Compatibility
SENSICARE® C 1000 is compatible with the most common raw materials used in personal care
formulations, anionic, no ionic and cationic surfactants, salts and pigments. used in water based no
surfactant cosmetics (serums or micellar water) it disperses in water giving a milky appearance,
when used in formulations that must be clear it is recommended the use of solubilizers, such as
ethoxylathed castor oil, anionic surfactants, polysorbate , emollients in general about 0.2 %.
Solubility
SENSICARE® C 1000 is partially soluble in water, totally soluble in polar solvents (propylene glycol,
propanol and acetone), totally soluble in polyalcohols (sorbitol), and is moderately soluble in aliphatic
solvents.
SENSICARE® C 1060 usage
Stability
SENSICARE® C 1060 is stable over a wide range of pH (up to pH 8), temperature (up to 80 ºC) and hydrolysis. It is
stable protecting inverse emulsions, direct emulsions and water soluble products.
Compatibility
SENSICARE® C 1060 is compatible with the most common raw materials used in personal care formulations,
anionic, no ionic and cationic surfactants, salts and pigments. used in water based no surfactant cosmetics
(serums or micellar water) it disperses in water giving a milky appearance, when used in formulations that must be
clear it is recommended the use of solubilizers, such as ethoxylathed castor oil, anionic surfactants, polysorbate ,
emollients in general about 0.2 %.
Solubility
SENSICARE® C 1060 is partially soluble in water, totally soluble in polar solvents (propylene glycol, propanol and
acetone), totally soluble in polyalcohols (sorbitol), and is moderately soluble in aliphatic solvents.
SENSICARE® C 1090 usage
Stability
SENSICARE® C 1090 is stable over a wide range of pH (up to pH 12), temperature (up to 80 ºC) and
hydrolysis. It is stable protecting inverse emulsions, direct emulsions and water soluble products.
Compatibility
SENSICARE® C 1090 High concentrations of surfactants can decrease its effectiveness. is
compatible with the most common raw materials used in personal care formulations, anionic, no
ionic and cationic surfactants, salts and pigments.
Solubility
SENSICARE® C 1090 is soluble in water, totally soluble in polar solvents (propylene glycol, propanol
and acetone), totally soluble in polyalcohols (sorbitol), and is moderately soluble in aliphatic solvents.
SENSICARE® C 3300 usage
Stability
SENSICARE® M 4200 is stable over a wide range of pH (up to pH 7) but the safety area it´s near 5,5, resistant to
temperature (up to 80 ºC). It is stable protecting inverse emulsions, direct emulsions and water soluble products.
Compatibility
SENSICARE® M 4200 is compatible with the most common raw materials used in personal care formulations,
anionic, no ionic and cationic surfactants, salts and pigments.
Don´t blend with ascorbic acid , pH stability need to be checked if the pH drop buffer the system ,the buffer can be
sodium lactate/lactic acid , sodium citrate / citric acid ( proportion 1 m4200/ 2 buffer)
Solubility
SENSICARE® M 4200 is soluble in water, totally soluble in polar solvents (propylene glycol, propanol and acetone),
totally soluble in polyalcohols (sorbitol), and aliphatic solvents.
risk evaluation
Spoilage risks
0% of probability of spoilage
It is vital important for the right prevention policy the identification, elimination and control of
al the possible contamination focuses in the production site and chain of use.
barrier technology
Preservative
SENSICARE C
Membrane-actives • Phenoxyethanol
• Benzyl alcohol
• Glyceryl Laurate
• Organic acids & salts
• EthylHexylGlycerin
Antioxidants • Piroctone Olamine
• Caprylyl Glycol
SENSICARE FP
Quelating Agents • Hydroxyacetophenone
• Tocopherol
• EDTA
• BHT
• Glutamic derivate
Available water
chapters
• Glycols
pH buffers • Glycerin
SENSICARE M • Polyalcohol
4200
• Gluconolactone M4200
• Lactic acid
• Citric acid
AW AVAILABLE WATER
CATEGORY
Product Face Face Shaving Body Sun Hair Decorative Wet
Body care Hair care Hair styling
cleansing care products cleansing protection cleansing cosmetics wipes
SENSICARE C 1000
SENSICARE C 1040
SENSICARE C 1045
SENSICARE C 1055
SENSICARE C 1060
SENSICARE C 2010
SENSICARE C 3000
SENSICARE C 3300
SENSICARE M 4200
GLYCERYL GLYCOLS /
ESTERS / ACIDS GLYCERYN
• STABILITY TESTED ON PERSONAL
CARE FORMULATIONS
• MICELLAR WATER
HANDCREAM
• BETTER PERFORMANCE • BODY CREAM
• BETTER COMPATIBILITY • PROTEIN SERUM
• WIDE PH RANGE • HAIR CONDITIONER
• HIGH TEMPERATURE RESISTANCE • SHAMPOO
preservative free testing
SENSICARE ® FP preservative free preservation solutions for personal care have been tested on several
frame formulations in order to verify the following parameters.
Compatibility: There is no affectation in the appearance and properties of the personal care product.
Stability: There is no affectation of the SENSICARE® preservation solution at dose level in the personal
care product.
The different frame formulations have been treated with different dosages of the SENSICARE range for preservative free preservation
solution.
Five synthetic frame formulations with 1.5 and 2.0 %
SENSICARE® FP 1
Two natural frame formulations with 1.0 and 1.5 %
SENSICARE ® NAT
The results have been given according to the Criteria A and B defined by the method.
SENSICARE® FP 1
INCI
Hydroxyacetophenone – antioxidant, anti-irritant*, emulsion stabilizer, antimicrobial
Glyceryl Laurate – emollient, emulsifier
Propylene glycol – humectant, skin conditioning
DOSE
1 – 2%
pH
2 – 10
TARGETED FOR
Baby care, facial care, eye contour, oral care, wet wipes, make up, clear cosmetics
Stability
SENSICARE® FP 1 is stable over a wide range of pH (up to pH 10), temperature (up to 80 ºC) and hydrolysis. It is stable protecting
inverse emulsions, direct emulsions and water soluble products. Recommended storage temperature up to 20ºC
Compatibility
SENSICARE® FP 1 is compatible with the most common raw materials used in personal care formulations, anionic, no ionic and cationic
surfactants, salts and pigments.
SENSICARE® FP 1 used in water based no surfactant cosmetics (serums or micellar water) it disperses in water giving a milky
appearance, when used in formulations that must be clear it is recommended the use of solubilizers, such as ethoxylathed castor oil,
anionic surfactants, polysorbate , emollients in general about 0.2 %.
Solubility
SENSICARE® FP 1 is soluble in water, totally soluble in polar solvents (propylene glycol, propanol and acetone), totally soluble in
polyalcohols (sorbitol), and aliphatic solvents.
SENSICARE® NAT
INCI
Citrus paradisi (grapefruit) Fruit Extract
Citrus paradisi (grapefruit) Seed Extract
Citrus aurantium extract humectant, skin conditioning, parfum, antioxidant
Citrus sinensis extract
Citrus reticulate (Tangerine) Peel extract
Vegetal glycerine – humectant, moisturizer
Ascorbic acid – antioxidant
Lactic acid – acid
Citric acid – acid
DOSE
1.0 – 2.0 %
pH
2 – 10
TARGETED FOR
Baby care, facial care, wet wipes, make up, green cosmetics, Cosmos, Ecocert, Natrue
SENSICARE® NAT
Dose of use & applications
The typical use concentration of SENSICARE® NAT in rinse-off products and in leave-on products is from 1% to 1,5%. The
recommended dosage is according to the Cosmetics Directive 76/768/CEE.
Natural origin preservation for free preservative formulations
Multifunctional activity due to its components potentiating the skin and hair conditioning, anti-oxidizing and wetting characteristics of the
personal care products and a fresh orange fragance.
Free Paraben / Free Phenoxyethanol / Booster Technology / Better efficiency against classic Sodium Benzoate / Preservative for all
different types of green Ecocert / cosmos / Natrue cosmetic
Stability
SENSICARE® NAT is stable over a wide range of pH (up to 10), temperature (up to 80 ºC) and hydrolysis. It is stable protecting inverse
emulsions, direct emulsions and water soluble products.
Compatibility
SENSICARE® NAT is compatible with the most common raw materials used in personal care formulations, anionic, no ionic and cationic
surfactants, salts and pigments. Incidence in the colour need to be check cause acid pH obtain light yellow coloration and higher pH
increase make it intense
Solubility
SENSICARE® NAT is soluble in water, totally soluble in polar solvents (propylene glycol, propanol and acetone), totally soluble in
polyalcohols (sorbitol).
SENSICARE® NAT
MIC and MBC
Minimum Inhibitory Concentration (MIC) is understood as the lowest concentration of the preservative solution that inhibits the growth
of a determined microorganism.
Minimum Bactericidal Concentration (MBC) is understood as the lowest concentration of the preservation solution that kills 99.9 % of a
determined bacteria.
The assays performed on SENSICARE® NAT have shown that the its effectiveness in terms of MIC and MBC is nearly the same, showing
therefore an antibacterial activity at dose level.
Mechanism
The complex formulation of SENSICARE® NAT facilitate a multiple path for the interaction of the different active ingredients present in the
system with the microorganisms which will lead to them to a failure and death.
This multiple mechanism of activity increases the antibacterial properties.
Multifunctionality
The different components of SENSICARE® NAT are not strictly antibacterial agents, and provide to the formulation where used other
properties.
The natural origin of these components of SENSICARE® NAT is responsible for these properties such as antioxidant, humectant,
conditioning etc.
SENSICARE® NAT
Natural extracts
The use of natural sources provides a rich blend of active ingredients that provide a great variety of chemistry.
Many of the components of these extracts have antibacterial properties.
The multiplicity of active ingredients with antibacterial activity ensures a broader activity spectra.
Moreover, other properties are associated to them providing further benefits to their used in personal care formulations.
Phenolic compounds are within these components present in different forms of the family of flavonoids (catechins, epicatechin,
procyanidin, etc.).
Other elements of much interest are ascorbic acid, tocopherols, citric acid, limonoids, sterols, etc.
Flavonoids
Flavonoids are a family of hydroxylated phenolic compounds naturally found in plants and fruits.
They are found in our daily diet.
They provide many benefits to our health.
They have antibacterial properties.
SENSICARE® BIOPOL ® Rinse off Selection guide
RINSE OFF
IF PARABENS ARE ACCEPTED • 0,6 - 0,8 % BIOPOL PB 6 (METHYL + ETHYL + PROPYL PARABEN + PHENOXYETHANOL )
IF IT´S ACCEPTED • 0,5 - 0,6 % SENSICARE C 1060 (PHENOXYETHANOL + PIROCTONE OLAMINE+ GLICERYL LAURATE)
PHENOXYETHANOL
• 0,9 - 1 % SENSICARE C 1090 (PHENOXYETHANOL + ETHYLHEXYLGLICERINE)
• 1 - 2 % SENSICARE FP 1
IF IT´S NOT ACCEPTED
PHENOXYETHANOL
BENZYLALCOHOL SB/PS • 1 - 2% SENSICARE NAT
Mercados
ACRIPOL T
PRODUCT APPLICATION POLIMER IONICITY % ACTIVE PRESENTATION pH APPLICATION VISCOSITY TRANSPARECY RECOMENDATION
ACRIPOL OP is a range of opacifiers for detergents , cosmetics and personal care. This line of
products are based in a styrene/acrylate dispersion in water.
Easy handling and use is the characteristic of this opacifiers. It is recommended a pre-dilution in
water at 10-20%.
Defoamers are products designed to avoid the problems caused by the presence of undesirable foams in the
production sequence, filling actions and application action. Even though are products to preserve the foam
formation and also to eliminate formed foams.
• Industrial grade
• DENSIPOL SI / DENSIPOL RMB / DENSIPOL SI 30
SILICONES • Food & Cosmetic grade
• DENSIPOL SI 99 / SENSICARE A 1000
www.chemipol.com