Professional Documents
Culture Documents
Sapa Glazed Elements 3050: Non-Insulated Glass Wall Partitions
Sapa Glazed Elements 3050: Non-Insulated Glass Wall Partitions
2
Constructed as a curtain wall, normally single-storey
height between floor slabs and columns, glazed from
the inside.
For fire protection classes, see section on Fire
Protection.
3050 uninsulated profiles For variants with symmetrically installed glass and
design glazing beads, see section on Sapa Doors.
3
Glazed element 3050 profiles
50
50
80
50
50
50
50
80
80
74 89/150/172/250
74 74 89/150/172/250
89/150/172/250
89
89 89
Asymmetrically installed glass, integrated glazing bead Symmetrically installed glass, design glazing bead
74 43
74 74
43
Glass thickness 3–20 mm Glass thickness 5–10 mm
50
Glazed element 3050 angles and corners
43
Innerhörn 45°
50
50
50
50
93
93
Glasparti 3050
93 Ytterhörn 90°
93
50
93
4 93
Glazed element 3050 3050 uninsulated profiles for interior solutions
Transom/mullion 50 mm
depth
Transom/mullion 52–250 mm
width
Glass Single-glazed: 3–20 mm
double-glazed: 20–33 mm
Variant available with design glazing beads for
symmetrically installed glass. Single-glazed: 5–10 mm
5 24
81
52
50
57
5
Glass and infill panels
Choice of glass. There are several alternatives, Choice of infill panel. Certain parts of the ele-
depending on your requirements for comfort and ments can or must be filled with infill panels. It is
energy efficiency; profiles that can take triple-glazed important to consider the backing and surface finish
units naturally allow the widest choice of glazing. on panels. If the infill panels are exposed to heavy
A wide selection of glass types are available for impact or mechanical loading you should choose a
needs such as personal safety, burglar protection, backing of durable board and an exterior surface of
fire p
rotection, noise reduction, dirt repellence, solar stainless steel or vitreous enamelled steel.
shading and energy saving. It is also possible to
screen-print the glass with different patterns, or to
use coloured glass.
Important points to consider. Glass surfaces that
are unprotected and placed where people can come
in contact with them must be designed to limit the
risk of personal injury. Such glass surfaces must be
designed to withstand the dynamic impact of a
Design tables can be found at sapabuildingsystem.se
person. Applicable standards and requirements Please contact us if you have any other questions on
must be taken into account. +46 383 942 00.
Glass 3050
Rebate depth
Glass rebate size
Glass
Inner
Glass size = daylight +34 mm
gasket
Daylight
Outer Inside
gasket glazing
bead
6
Glazed element 3050 examples of unclassified infill panels
Infill panel F1
Max. 1.5 mm aluminium sheet
thickness max. 30 mm insulation
33 mm 1.5 mm aluminium sheet
Infill panel F2
1.5 mm aluminium sheet
Max.
4.8 mm board
thickness
max. 20 mm insulation
33 mm
4.8 mm board
1.5 mm aluminium sheet
Infill panel F3
Max. 1.5 mm aluminium sheet
thickness 10 mm chipboard
33 mm max. 20 mm insulation
1.5 mm aluminium sheet
7
Kirtimų g. 47
www.sapa.lt
LT-02244 Vilnius
T +370 5 210 2587
E sapa.lt@hydro.com
Hydro Building Systems Lithuania UAB
We reserve the right to make changes in the product range and design without prior notice. We reserve the right for any printing or typographical errors. Sapa, December 2018.