Professional Documents
Culture Documents
Postfach 164
Meierskappelstrasse 3
CH–6403 Küssnacht am Rigi
GGT200 is produced by carbon steel with oil The GGT250 bearing material is developed from
groove, the initial grease given can be deposited the GGT200, the solid lubricant have been
the mass lubrication for long time working. The embedded instead of covering on surface which
work surface has been sprayed a special solid can provide the solid lubricant for much long time
lubricant, this solid lubricant can be transfer to the during the operation even without any oil given.
mating material during the operation and forming a This material provides a maintenance-free design
solid lubrication film between the bearing and shaft solution, particularly for high load, intermittent of
which make the bearing material have high load oscillating motion with lower speed and excellent
capacity with lower friction and excellent wear wear resistance required.
resistance.
GGT Gleit-Technik AG
Postfach 164
Meierskappelstrasse 3
CH–6403 Küssnacht am Rigi
Material characteristic
Bushes Sketch