() the standard in safety
2010-05-06
2010-03-06
File 6340805 vol 1
FOLLOW-UP SERVICE PROCEDURE
cree)
PROCESS CONTROL EQUIPMENT, ELECTRICAL
(QUYX, QUYx7)
Manufacturer: SCHISCHEK GMBH
(100008-431) | GEWERBEGEBTET suD 5
MUHLSTELG 45
90579 LANGENZENN GERMANY
Applicant: SAME AS MANUFACTURER
¢100008-431)
Listee: SAME AS MANUFACTURER
(100008-431)
This Procedure authorizes the above manufacturer to use the marking specified by
Underwriters Laboratories Inc. (Jl), or any authorized licensee of UL, only on products
covered by this Procedure, in accordance with the applicable UL Services Agreement.
‘the prescribed Mark or Marking shall be used only at the above manufacturing location on such
products which comply with this Procedure and any other applicable requirements.
The Procedure contains information for the use of the above named Manufacturer and
representatives of Underwriters Laboratories Inc. and is not to be used for any other
purpose. It is lent to the Manufacturer with the understanding that it is not to be copied,
either wholly or in part, and that it will be returned to Underwriters Laboratories Inc. (UL)
or any authorized Licensse of Ub, upon request
This PROCEDURE, and any subsequent revision, is the property of Underwriters Laboratories
Inc. (Ub) and the authorized licensee of UL and is not transferable.
Underwriters Laboratories Inc
Em — Dam blog
‘stephen Hewson William R. Carney
Senior Vice President Director
Global Follow-up Service Operations North Anerican Certification ProgramFile 5340805 Vol. 1 Index Page 1 Issued: 2010-09-02
INDEX
Type. Section Report Date | Approvals
Electronic Actuators, model nos.
ExMax, RedMax, InMax size S and M,
ExRun, RedRun, InRun, ExPlus,
RedPlus, InPlus, may be followed
by additional letters and/or
numbers denoting several non
safety relevant features and
options.
1 2010-09-02 B
Approval Abbreviation:
A ~ Evaluated to United States standarde only.
B - Evaluated to United States Standards and Canadian National Standards.
¢ - Evaluated to Canadian National Standards Only.