Professional Documents
Culture Documents
1. Remove loose coating from the damaged 2. Preheat the pipe coating up to 60°C. 3. Heat the end of the PERP Melt Stick until it
area with a knife, scraper or wire brush. Eliminate all sharp becomes glossy.
edges and clean the damaged area and adjacent coating to
remove all foreign material such as dirt, rust, oil, grease and
moisture.
4. Spread the molten adhesive onto the 5. When the PE is hard, smooth the molten
damaged area. adhesive flush with the PE line coating by use of a point
scraper.
AG‐COVALENCE‐PERP‐MS‐V1‐SEP15‐AARPS‐0406
Oficinas Bolivia:
Covalence
Santa Cruz
Zona Norte km 8 ½ Av. Banzer
Urbanización Jardines del Remanzo S/N
(591-3) 3484041
info@matservice.com.bo
www.matservice.com.bo
Oficinas Perú:
Covalence
Lima
Calle José María Eguren N° 148
Magdalena del Mar
(511) 463-2051
(512) info@matservice.com.pe
www.matservice.com.bo