Professional Documents
Culture Documents
1 12
MIX
CALEFFI
COLD HOT
COLD HOT
COLD
2
1
NIM
7 XAM
6
CALEFFI
NF
A
CALEFFI
NF
A
698523237
SERIES
Pre-adjustable pressure reducing valves 5350, 5351
Pressure reducing valves 5360, 5362, 5365, 5366, 537
Pressure reducing and stabilising valves 539, 576, 578
Inclined pressure reducing valves 5330, 5331, 5332, 5334, 5335, 5336, 5337, 5338, 5339
Strainers cartridges and housing 5370
Check valves, ROBOCHECK 3037, 3038
Water hammer arresters, ANTISHOCK 525
Ball valves with built-in check valve, BALLSTOP 3230, 332, 333, 334
Electronic mixing valve with programmable thermal disinfection, LEGIOMIX® 6000, 6001
Unit for temperature control and thermal disinfection, LEGIOFLOW® 6005
Anti-scald device / Timer for valve operation 6001, 6002
Thermostatic regulator 116, 118
Thermostatic mixing valves for small applications 520, 522, 521
Anti-scald thermostatic mixing valves 5213, 5217
Anti-scald tempering and thermostatic mixing valves 5213
Anti-scald thermostatic mixing valves for wash-hand basin 601, 602
Thermostatic mixing valves for medium-large applications 5230
Thermostatic mixing valve for large applications 524
Hydraulic safety groups for hot water storage heaters 5261, 319
Temperature and pressure relief valve 309
Welded expansion vessel and flow limiter 5557, 534
Pre-assembled distribution manifolds 360, 354, 3642, 3641, 5991, 5993
Anti-freeze devices, ICECAL ®
603
6
AS 1357.2
WMKA 02467 With 1/4” F pressure gauge connection
Code
535022 Ø 22 1 10
535141 1/2” 1 5
535151 3/4” 1 5
535161 1” 1 5
116
ACCREDITED
536041 1/2” 1 5
536051 3/4” 1 5 With double pressure gauge in glycerine bath
536061 1” 1 5 Code
536071 1 1/4” 1 4
536581 1 1/2” 754,00 1 –
536081 1 1/2” without DVGW - SVGW certifications 1 4
536591 2” 806,00 1 –
With 1/4” F pressure gauge connection
With 1/4” F double pressure gauge connection
Code
Code
536040 1/2” 1 5
536050 3/4” 1 5 536580 1 1/2” 701,00 1 –
536060 1” 1 5 536590 2” 754,00 1 –
536070 1 1/4” 1 4
536080 1 1/2” without DVGW - SVGW certifications 1 4
5366 tech. broch. 01026
Pressure reducing valve
5362 tech. broch. 01026 with replaceable cartridge. Bronze body.
Pressure reducing valve with replaceable cartridge. Flanged connections, PN 16.
dezincification resistant alloy body. To be coupled with flat counterflanges EN 1092-1.
Female connections. Max. upstream pressure: 16 bar.
Max. upstream pressure: 25 bar. Downstream setting pressure range: 0,5–6 bar.
Downstream setting pressure range: 0,5–6 bar. On request 6–10 bar.
Max. working temperature: 80°C. Max. working temperature: 80°C.
Pressure gauge: upstream: 0–25 bar.
Pressure gauge: downstream: 0–10 bar.
536241 1/2” 1 5
536251 3/4” 1 5
536261 1” 1 5
With double pressure gauge in glycerine bath
With 1/4” F pressure gauge connection
Code
Code
536660 DN 65 1.632,00 1 –
536240 1/2” 1 5
536250 3/4” 1 5
536260 1” 1 5
5360
537 Replacement cartridge for pressure reducing valves
5360, 5362, 5365 and 5366 series.
Soldering union connections.
Code Code
117
ACCREDITED
Code
Code
533041 1/2” 1 20
539250 3/4” 1 20 533051 3/4” 1 20
576080 DN 180 1 –
576100 DN 100 1 – 5332 tech. broch. 01024
576120 DN 125 1 – Inclined pressure reducing valve.
Replaceable cartridge and strainer.
576150 DN 150 1 –
Brass body. Chrome plated.
576200 DN 200 1 – Max. upstream pressure: 16 bar.
Downstream setting pressure range: 1–6 bar.
Max. working temperature: 60°C.
578 ● With pressure gauge: 0–10 bar.
Pilot operated pressure reducing valves.
Cast iron body, PN 25. Flanged connections.
To be coupled with flat counterflanges EN 1092-1:
DN 65–DN 150, PN 16;
DN 200–DN 400, PN 10. Code
Max. upstream pressure: 25 bar. 533241 1/2” 1 20
Downstream setting pressure
533251 3/4” 1 20
range: 1–20 bar.
With pressure gauges.
118
ACCREDITED
AS 1357.2
WMKA 02467
Code
533545 1/2” 1 25
Code
533555 3/4” 1 25
533841 Ø 15 1 20
533851 Ø 22 1 20
5335
Three-way inclined pressure reducing valve.
Replaceable cartridge and strainer.
dezincification resistant alloy body.
Chrome plated. 5339
Interchangeable outlet, with plug. Inclined pressure reducing valve
Max. upstream pressure: 1600 kPa. with compression ends and built-in safety
Downstream setting pressure range: relief valve.
100–600 kPa.
Max. working temperature: 60°C. Pressure reducing valve.
dezincification resistant alloy body.
Replaceable cartridge and strainer.
AS 1357.2
Max. upstream pressure: 1600 kPa.
WMKA 02467
Downstream setting pressure range:
Code
100–600 kPa.
533550 3/4” 1 30 Max. working temperature: 60°C.
Safety relief valve.
With stainless steel seat.
5336 tech. broch. 01024 dezincification resistant alloy body.
Inclined pressure reducing valve
with compression ends.
Replaceable cartridge and strainer. SANS 198
dezincification resistant alloy body.
Chrome plated.
Max. upstream pressure: 16 bar.
Downstream setting pressure range: 1–6 bar. Code
Max. working temperature: 60°C. 533944 Ø 15 1 25
533954 Ø 22 1 25
Code
533641 Ø 15 1 25 5330
533651 Ø 22 1 25
Replacement cartridge.
For reducing valves 5330, 5331, 5332, 5334, 5335,
5336, 5337, 5338 and 5339 series.
5337 tech. broch. 01024
Inclined pressure reducing valve
with compression ends.
Replaceable cartridge and strainer. Code
dezincification resistant alloy body. 533000 1 100
Chrome plated.
Max. upstream pressure: 16 bar.
Downstream setting pressure range: 1–6 bar.
Max. working temperature: 60°C.
With 1/4” F pressure gauge connection.
Code
533741 Ø 15 1 20
533751 Ø 22 1 20
119
ACCREDITED
Code
537050 3/4” 1 –
537060 1” 1 –
Code
537004 1 –
537005 1 –
Code
Code
303715 Ø 15 10 100
3038
ROBOCHECK-2
15 mm controllable double check valve
with compression ends.
dezincification resistant alloy body.
Chrome plated.
Max. working pressure: 10 bar.
Max. working temperature: 90°C.
Code
303715 Ø 15 10 100
120
ACCREDITED
BALLSTOP BALLSTOP
Ball valve with built-in check valve. Ball valve with built-in check valve.
Brass body. Chrome plated. Brass body. Chrome plated.
Female connections. Female - nut connection.
Butterfly handle. Drilled anti-tamper safety nut.
Max. working pressure: 16 bar. Butterfly handle.
Temperature range: 5–90°C. Max. working pressure: 16 bar.
Temperature range: 5–90°C.
Code
Code
323070 1 1/4” 4 –
323080 1 1/2” 2 –
323090 2” 1 –
BALLSTOP
Ball valve with built-in check valve.
Brass body. Chrome plated.
Male - female connections.
Butterfly handle.
Max. working pressure: 16 bar.
Temperature range: 5–90°C.
Code
BALLSTOP
332400 1/2” M x 1/2” F 17,00 10 – TWO VALVES
IN ONE
121
ACCREDITED
Legionella-distribution temperature
In central systems that produce hot water for sanitary purposes with
storage, in order to prevent the growth of dangerous Legionella bacteria,
the hot water must be stored at a temperature of at least 60°C.
In addition, not only the storage but also the entire distribution network
needs thermal disinfection at regular intervals. Otherwise the bacteria
would quickly form there too.
Thermal disinfection
Function
The drawing alongside shows the behaviour of Legionella Pneumophila
This particular series of electronic mixing valves is equipped with a bacteria as the conditions vary in the temperature of the water
special regulator that controls a set of programs for circuit thermal containing the bacteria, in laboratory cultures.
disinfection. In addition it enables checking the temperature and time To ensure correct thermal disinfection, it is necessary to go up to values
for thermal disinfection are actually reached and undertaking the of no less than 60°C.
appropriate corrective action.
All the parameters are updated every day and logged, recording the
temperatures by time.
122
ACCREDITED
Max. inlet temperature: 100°C. of the electronic mixing valve 6000 series. Complete with:
Protection class: IP 65 (actuator). - RS232 interface-computer connection cable,
Patented.
- LEGIOMIX® interface connection cable with telephone connector,
- USB/serial adaptor,
- transmission and management software.
Supply: 230 V - 50 Hz - 5 VA.
Dimensions: 165 x 120 x 40 mm.
Code
600100 1 –
7558 Accessories
Code
Code Kv (m3/h) 755845 analog modem
600006 DN 65 190,0 6.071,00 1 – 755846 GSM digital modem
600008 DN 80 120,0 6.830,00 1 – 755855/N bus cable (FROR 450/750 - 2x1 mm2) - 100 m coil
Data transmission
with GSM modem
CALEFFI
Martedi 13/02/2006
20
regolazione Ok
in corso
LEGIOMI
Shock Menu Ok
Local transmission
Interfaccia per
Interface for
Cod. 600100
T
Attenzione: Componenti in tensione
Warning: Components under tension
66131
®
LEGIOMIX
interface
123
ACCREDITED
LEGIOFLOW ®
LEGIOFLOW ®
Multi-function compact unit for temperature control, thermal disinfection Multi-function compact unit for temperature control, thermal disinfection
and distribution for domestic water system. Equipped with: and distribution for domestic water system. Equipped with:
- anti-scald thermostatic mixing valve, - anti-scald thermostatic mixing valve,
- automatic flushing valve for thermal disinfection with thermo-electric - automatic flushing valve for thermal disinfection with thermo-electric
actuator, actuator,
- shut-off ball valve with built-in strainers and check valves, - shut-off ball valve with built-in strainers and check valves,
- cold water circuit outlet kit. - cold water circuit outlet kit,
- distribution manifolds with built-in shut-off valves,
Inlet connections: 3/4” M.
Outlet connections: 3/4” M with union. - box code 362056 (560x330x80).
No. outlets
Code Conn. cold hot Outlets
124
ACCREDITED
As shown in the diagram provided, temperatures of more than 50°C Adjustment temperature Adjustment locking using the
can cause scalds very quickly. For example, at 55°C, partial burning locking nut
will occur in approximately 30 seconds, while at 60°C partial burning
will occur in approximately 5 seconds. On average, these times can be
halved for children and elderly people. Therefore, it is necessary to use
a thermostatic mixing valve able to:
- reduce the temperature at the point of use to a value lower than that
of the storage and make it suitable for sanitary use.
- maintain the temperature constant despite any variation of the
incoming pressure and temperature.
- prevent the water temperature at the outlet from reaching values
above 50°C.
- have an anti-scald safety function in case of failure of the cold water
supply.
Thermal disinfection
Function
The multi-function unit is used in sanitary water systems to control the hot
and cold water delivered to user taps, serving a bathroom or a dwelling.
A high-performance adjustable thermostatic mixing valve keeps the hot
water temperature at the desired level and protects the user from the
danger of scalding.
A flushing valve is used for the circuit thermal disinfection all the way to
the tap, incompliance with anti-Legionella regulations.
Hydraulic diagram
125
ACCREDITED
Code
600140 1/2” 1 10
Code
Supply voltage
Code V
Code
118000 ✱ 1 –
6002 ●
Timer with programmable key,
settings from 1 to 12 minutes.
To operate the valves used to carry
out thermal disinfection of circuit
sections, up to the taps.
Supply: 230 V (ac).
Code
meetnttteem
meetnttteem
all eentu iidd o
o edd p
a nu
a nu
tn e rreep
tn e rreep
m otta
m otta
600200 1 –
126
ACCREDITED
521
CALEFFI
Temperature
Code adjustment Kv (m3/h)
127
ACCREDITED
Temperature
Code adjustment Kv (m3/h)
Temperature
Code adjustment Kv (m3/h) 521714 1/2” 30–50°C 1,50 92,45 1 10
521303 3/4” 30–50°C 1,7 92,45 1 10 521713 3/4” 30–50°C 1,85 92,45 1 10
Temperature
Code adjustment Kv (m3/h)
128
ACCREDITED
5213 5213
Adjustable anti-scald tempering valve with Adjustable termostatic mixing valve with
check valves and strainers at the inlets. check valves and strainers.
dezincification resistant alloy body. Enhanced thermal performance device
Chrome plated. with anti-scald safety function.
Male union connections. dezincification resistant alloy body.
Max. working pressure: 1400 kPa. Chrome plated.
Max. inlet temperature: 85°C. Male union connections.
Certified to AS 4032.2, NHS D08, Max. working pressure: 1400 kPa.
BS 7942, EN 1111 and EN 1287. Max. inlet temperature: 85°C.
Certified to AS 4032.1, NHS D08,
BS 7942, EN 1111 and EN 1287.
AS 4032.2
WMKA 02466
AS 4032.1
WMKA 02466
H EAL
SW T
H
APPROVED
T
DE
PA
N
RTME
Temperature Temperature
Code adjustment Kv (m3/h) Code adjustment Kv (m3/h)
5213
High performance adjustable anti-scald
tempering valve with check valves and
strainers at the inlets.
Suitable for instantaneous hot water
systems.
dezincification resistant alloy body.
Chrome plated.
Male union connections.
Max. working pressure: 1400 kPa.
Max. inlet temperature: 85°C.
Certified to AS 4032.2, NHS D08,
BS 7942, EN 1111 and EN 1287.
AS 4032.2
WMKA 02466
Temperature
Code adjustment Kv (m3/h)
129
ACCREDITED
Temperature adjustment
601 ● tech. broch. 01162 Cold
water
Mixed water temperature can be
Anti-scald thermostatic mixing valve
set to the desired value by turning
for wash-hand basins.
the adjustment screw.
With check valves and strainers.
The cover, prevents unauthorised
With tamper-proof cap.
persons from tampering with the
Brass body.
setting.
High chrome finish.
Max. working pressure: 10 bar. Hot
Max. inlet temperature: 90°C. water
Adjustment temperature range: 25–50°C.
Kv (m3/h): 0,8.
By-pass function
By-pass
The 602 series thermostatic mixing open
valve is equipped with a special
by-pass mechanism to provide
thermal disinfection at each By-pass
individual tap. closed
After removing the protective cover,
turn the screw fully anti-clockwise.
In this way, only the incoming hot
Hot water Cold and mixed water water will circulate, independently
Code connection connection of the thermostat action.
601310 3/8” F nut 3/8” - Ø 10 olive 1 10
601312 3/8” F nut 3/8” - Ø 12 olive 1 10
601333 3/8” F nut 3/8” M flat seat 1 10
601415 1/2” - Ø 15 olive 1/2” - Ø 15 olive 1 10
601444 1/2” M flat seat 1/2” M flat seat 1 10
130
ACCREDITED
Temperature
Code adjustment Kv (m3/h)
Temperature
Code adjustment Kv (m3/h)
131
ACCREDITED
524 ●
Adjustable thermostatic mixing valve.
Bronze body, PN 10.
Flanged connections.
Equipped with flat counterflanges
EN 1092-1, PN 10.
Recirculation pipe connections.
Factory setting: 48°C.
Max. working pressure: 10 bar.
Max. inlet temperature: 90°C.
Temperature
Code adjustment Kv (m3/h)
132
ACCREDITED
Code
526142 1/2” 1 30
526152 3/4” 1 30
Code
526151 3/4” 1 10
5261 tech. broch. 01019
Hydraulic safety group
for hot water storage heaters,
with shut-off valve and controllable
check valve.
Brass body. Chrome plated. 319 ● tech. broch. 01019
Max. working pressure: 10 bar. Plastic discharge tundish
Max. working temperature: 120°C. for safety groups 5261 series.
Setting: 7 bar.
Max. power rating: 10 kW.
Certified to EN 1487.
Code
319601 1” 1 25
Code
Setting: 7 bar.
Max. power rating: 3/4” - 10 kW.
1” - 18 kW.
Certified to EN 1487.
Code
133
ACCREDITED
Accuracy
Code (%)
Precharge
Code Litres Conn. (bar)
134
ACCREDITED
360 3642
Domestic water distribution manifolds pre-assembled End fitting.
in inspection wall box. Chrome plated.
Chrome plated. For distribution manifolds 360 series.
Max. working pressure: 10 bar.
Temperature range: 5–100°C.
Outlet centre distance: 35 mm. Code
Consisting of: 364255 3/4” M x 1/2” F 2 –
- pair of manifolds 354 series, chrome plated;
- pair of stainless steel mounting brackets, code 360210;
- inspection wall box code 360032 (320 x 250 x 90).
3641
Plug.
Chrome plated.
For distribution manifolds 360 series.
Code
364151 3/4” M 2 –
5991
End fitting.
Chrome plated.
For distribution manifolds 360 series.
Code
354 Code
Modular single distribution manifold 599351 3/4” F 4,69 2 10
with shut-off valve. Chrome plated.
Max. working pressure: 10 bar.
Temperature range: 5÷100°C.
Outlet centre distance: 35 mm. Example of distribution group composition
360
Pair of stainless steel mounting
brackets for modular single
distribution manifolds 354 series.
For inspection box 360 and 362 series.
Code
360210 ✱ 1 10
135
ACCREDITED
ANTI-FREEZE DEVICES
ICECAL ®
ICECAL ®
Code Code
603450 1/2” M x 3/4” M with hose connection 1 – 603041 1/2” F nut 36,30 1 –
Function
The anti-freeze safety device prevents ice build-up in domestic water
circuits, avoiding possible damage to pipes in hydraulic, irrigation and
solar systems. Anti-freeze safety device closed
When the minimum ambient operating temperature is reached, it
automatically opens so that a minimum quantity of water may flow
toward the drain, enabling a small continuous inflow of water; this
prevents the circuit from freezing.
A particular product has been developed by combining the anti-freeze
safety device with a garden tap ball type, specifically constructed for
these installations.
The valve is fitted with ball with blow-out proof design, O-ring seal and
packing gland; the control lever and fixing nut are made of stainless
steel, for total resistance against corrosion in different climatic
conditions.
136
ACCREDITED