Professional Documents
Culture Documents
Operating Instructions
Getting started
DVD Recorder
Model No. DMR-EH50
Recording
Playing back
Editing
Transferring
(Dubbing)
Convenient
functions
≥The unit will play DVDs marked with labels containing “1” or
“ALL”.
Example: La referencia rápida en español se puede encontrar
1 en la página 72.
1 ALL 2
4
P PC RQT8023-P
EH50English.book Page 2 Tuesday, February 1, 2005 6:36 PM
CAUTION! CAUTION!
THIS PRODUCT UTILIZES A LASER. DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL. OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
Table of contents
Getting started
Inserting/Removing the SD card . . . . . . . . . . . . . . . . . . .5
Picture and folder operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Using DVD-R, DVD-RW and +R on this unit . . . . . . . . . . .6
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Transferring (Dubbing)
The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
HDD, disc and card information . . . . . . . . . . . . . . . . . . . .8 Transferring (dubbing) titles or playlists . . . . . . . . . . . 43
Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . .10 One Touch Transfer (dubbing) . . . . . . . . . . . . . . . . . . . . . . . . . 44
STEP 1 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Transferring (dubbing) using the transferring (dubbing) list . . . 44
STEP 2 Setting up the TV Guide On ScreenTM Transferring (dubbing) a finalized DVD-R,
system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 DVD-RW (DVD-Video format) and +R . . . . . . . . . . . . . . . . . . 46
STEP 3 Set up to match your television and remote Recording from a video cassette recorder . . . . . . . . . 47
control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Transferring (dubbing) still pictures . . . . . . . . . . . . . . 48
Transferring (dubbing) using the transferring (dubbing) list . . . 48
Recording Transferring (dubbing) all the still pictures on a card—COPY ALL
PICTURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Recording television programs . . . . . . . . . . . . . . . . . . .20
Selecting audio to record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Convenient functions
Recording for High-Speed Dubbing . . . . . . . . . . . . . . . . . . . . . 22
Flexible Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 HDD, disc and card management . . . . . . . . . . . . . . . . . 50
Playing while you are recording . . . . . . . . . . . . . . . . . . . . . . . . 23 Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Scheduled recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Setting the protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Using the TV Guide On ScreenTM system to make scheduled Providing a name for a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Erasing all titles and playlists—Erase All Titles . . . . . . . . . . . . 51
Manually programming scheduled recordings . . . . . . . . . . . . . 25 Erasing all the contents of a disc or card—Format. . . . . . . . . . 51
Using VCR Plusi system to make scheduled recordings. . . . 26 Enabling discs to be played on other equipment . . . . . . . . . . . 52
Check, change or delete a program. . . . . . . . . . . . . . . . . . . . . 27 Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Utilizing the TV Guide On ScreenTM system . . . . . . . . .28 Changing the unit’s settings . . . . . . . . . . . . . . . . . . . . . 54
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Playing back Summary of settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Playing recorded video contents/ Channel/Clock settings when TV Guide On ScreenTM
Playing play-only discs . . . . . . . . . . . . . . . . . . . . . . . . .30 system is not used . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Operations during play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Auto channel/clock settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Simple editing operations during play . . . . . . . . . . . . . . . . . . . 32 Channel captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Changing audio during play . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using menus to play MP3 . . . . . . . . . . . . . . . . . . . . . . . .33 Reference
Playing still pictures (JPEG/TIFF) . . . . . . . . . . . . . . . . .34 Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Useful functions during still picture play. . . . . . . . . . . . . . . . . . 35 Frequently asked questions . . . . . . . . . . . . . . . . . . . . . 60
Using on-screen menus/FUNCTIONS window and Status Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 62
message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
FUNCTIONS window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Status messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Limited Warranty (ONLY FOR U.S.A.) . . . . . . . . . . . . . . 70
Editing Limited Warranty (ONLY FOR CANADA) . . . . . . . . . . . 71
Editing titles/chapters . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Guía de referencia rápida en español . . . . . . . . . . . . . 72
Editing titles/chapters and playing chapters. . . . . . . . . . . . . . . 38 (Spanish Quick Reference)
Title operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Backcover
Chapter operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Useful features
This DVD Recorder records high quality images to rapid random TV Guide On ScreenTM system
access capable HDD (Hard disk drive) or DVD-RAM. This has The TV Guide On ScreenTM system provides a handy electronic
resulted in many new features that outperform older tape formats. program guide (EPG) for checking what’s on. Setting up to record a
The following information summarizes a few of these features. broadcast is easy too. Simply select the desired program from the
Instant recording displayed list. You can also search for desired programs
You no longer need to search for empty disc space. By pressing the alphabetically or by displaying only the programs in a certain
recording button, the unit finds available recording space and begins category.
recording right away. There is no need to worry about overwriting ≥This service may not be available in some areas.
already recorded content. Instant play
The Quick Start feature enables this unit to be ready to start There is no need to rewind or search forward. Direct Navigator
recording as quick as approximately 1 second§ after turning it on. guides you to the beginning of the recorded video immediately.
You can start recording soon after deciding you want to record
something.
Chasing playback
§ Only when recording to the HDD or DVD-RAM There is no need to wait until recording is complete. Without
stopping recording, you can play the video currently being recorded
HDD recording from its beginning.
You can keep on recording your favorite programs to an internal
HDD that is able to record up to 177 hours when using EP (8H) Simultaneous Recording and Playback
mode. While recording, you can play another video program that was
You can also high speed transfer (dub) your favorite programs to recorded previously.
DVD-RAM, DVD-R, DVD-RW (DVD-Video format) or +R and create a Time Slip
backup disc. During play, and also while recording, you can jump to the scene you
SD card slot wish to view by specifying the skip time.
The SD card slot of this unit lets you transfer (dub) digital camera RQT8023
photographs from a card to DVD-RAM for easy storage without using
a computer. 3
EH50English.book Page 4 Tuesday, February 1, 2005 6:36 PM
The HDD is a high precision recording instrument and because of its long recording capability and high speed operation it is a very special device
that is easily susceptible to damage.
As a basic rule, save important content to a disc as backup.
∫ The HDD is a device that is not built to withstand vibration/shock or dust
Depending on the setup environment and handling of the HDD some content may become damaged and play and recording may no longer be
possible. Especially during operation, do not subject the unit to any vibration, shock, or remove the AC power plug from the household AC outlet.
In the event of a power failure during recording or play, the content may be damaged.
Getting started
RQT8023
4
EH50English.book Page 5 Tuesday, February 1, 2005 6:36 PM
∫ How to hold a disc or card ≥Do not expose the terminals of the card to water, garbage or other
strange things.
Do not touch the recorded ≥Do not drop, stack, or impact discs. Do not place objects on them.
surface or the terminal surface. ≥Do not use the following discs:
–Discs with exposed adhesive from removed stickers or labels
∫ Concerning non-cartridge discs (rental discs, etc.).
Be careful about scratches and dirt. –Discs that are badly warped or cracked.
Getting started
–Irregularly shaped discs, such as heart
shapes.
∫ If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry. ≥Do not place in the following areas:
–In direct sunlight.
–In very dusty or humid areas.
–Near a heater.
∫ Handling precautions –Locations susceptible to significant difference in temperature
≥Do not attach labels or stickers to discs. (This may cause disc (condensation can occur).
warping and un-balanced rotation, rendering it unusable.) –Where static electricity or electromagnetic waves occur.
≥Write on the label side of the disc only with a soft, oil-based felt ≥To protect discs from scratches and dirt, return them to their cases
pen. Do not use ballpoint pens or other hard writing implements. or cartridges when you are not using them.
≥Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥Do not use scratch-proof protectors or covers.
The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem
with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused by
such loss.
Examples of causes of such losses are
≥A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company.
≥A disc used as described above and then played again in this unit.
≥A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit.
Unit care
The precision parts in this unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown. Do not place the unit on
To clean this unit, wipe with a soft, dry cloth. amplifiers or equipment
≥Never use alcohol, paint thinner or benzine to clean this unit. that may become hot.
≥Before using chemically treated cloth, carefully read the The heat can damage the unit.
instructions that came with the cloth.
Observe the following points to ensure continued listening and
viewing pleasure. [Note]
Dust and dirt may adhere to the unit’s lens over time, making it Do not obstruct the rear panel’s internal cooling fan.
impossible to record or play discs.
Use the DVD-RAM lens cleaner about once every year, depending
Before moving the unit, ensure the disc tray is empty.
on frequency of use and the operating environment. Carefully read
Failure to do so will risk severely damaging the disc and the
the lens cleaner’s instructions before use.
unit.
Lens cleaner: LF-K123LCA1 or RP-CL720 (On sale from May
2005)
≥You can use SD Memory Cards with capacities from 8 MB to 1 GB (➡ 9). RQT8023
5
EH50English.book Page 6 Tuesday, February 1, 2005 6:36 PM
Therefore, follow the steps below when you use DVD-R, etc.
∫ When you want to transfer (dub) titles in high speed mode from the HDD to DVD-R, etc.
Set “Rec. for High-Speed Dubbing” to “On” before recording to the HDD (➡ 22).
You can transfer (dub) titles in high speed mode (max. speed is 64k); however, the following settings are necessary before recording to the HDD.
Set “Rec. for High-Speed
Dubbing” to “On” (➡ 22).
Record to the HDD High speed transfer (dub) to DVD-R, etc.
SETUP Setting for recording
Recording Time in EP Mode EP (8H)
Rec. for High-Speed Dubbing On
Channel
Setup HDD
Disc
Video
Audio
Í
1
;
∫
DISPLAY
TOP MENU
RETURN SUB
MENU -TITLE
ANGLE
AUDIO
A.SURROUND CANCEL
3
2
1 S10
6
5
Finalize
4 0
9
8
7 9
:
5 VOLUME
6
PAGE r
GROUP s
CHG
SEARCH
ENTER
VOL
DISPLAY
MENU
TOP
RETURN
ON
MENU
OFF
DC
IN
9V
Í /I Í DOUBLE RE-MASTER CD SEQUENTIAL DISC 1 2 3 4 5 ∫ ; 1 :/6 5/9 DISC EXCHANGE DISC SKIP <OPEN/CLOSE
OPEN
UND
A.SURRO
REPEAT
MODE
MONITOR
MODE
PICTURE
RQT8023
6
EH50English.book Page 7 Tuesday, February 1, 2005 6:36 PM
Accessories
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
(Product numbers correct as of December 2004. These may be subject to change.)
Only for U.S.A.: To order accessories, refer to “Accessory Purchases” on page 70.
Only for Canada: To order accessories, call the dealer from whom you have made your purchase.
∏ ∏ ∏ ∏ ∏ ∏
Getting started
1 Remote control 1 AC power supply 1 75 ≠ coaxial 2 Batteries 1 Audio/video 1 IR Blaster
(EUR7729KB0) cord cable for remote control cable (K2ZZ04C00001)
(K2CB2CB00018) (K2KZ2BA00001) (VJA0788-A)
≥For use with this
unit only. Do not use
it with other
equipment.
Also, do not use
cords for other
equipment with this
unit.
(U.S.A. only)
Product Registration Card
Please complete and return the included product registration card, or register via the Internet at: http://www.prodreg.com/panasonic/
R6/LR6, AA
20
30 20
30
≥Do not use rechargeable type batteries.
≥Do not mix old and new batteries. 7 m (23 feet) directly in front of the unit
≥Do not use different types at the same time.
≥Do not heat or expose to flame.
≥Do not take apart or short circuit.
≥Do not attempt to recharge alkaline or manganese batteries.
≥Do not use batteries if the covering has been peeled off.
RQT8023
7
EH50English.book Page 8 Tuesday, February 1, 2005 6:36 PM
HDD and discs you can use for recording and play
(Chart continues on page 9.)
DVD-RAM DVD-R (DVD-Video format)
Hard disk drive (HDD)
Disc type ≥4.7 GB/9.4 GB, 12 cm (5z) ≥4.7 GB, 12 cm (5z)
≥100 GB
≥2.8 GB, 8 cm (3z) ≥1.4 GB, 8 cm (3z)
Getting started
Logo –
Logo –
Indicated in these
[DVD-V] [DVD-A] [-RW‹VR›] [DVD-V]
instructions with
Instructions High quality movie High fidelity music DVD-RW recorded on another DVD Recorder +RW recorded on
and music discs discs ≥You can play programs that allow “One time another DVD Recorder
≥Played on this unit only recording” if they have been recorded to a ≥It may be necessary
in 2 channels CPRM compatible disc. to finalize the disc on
≥There is no digital ≥You can play discs that have not been finalized.
the equipment used
output. ≥By formatting (➡ 51) the disc, you can record to
it in DVD-Video format and play it on this unit. for recording.
≥You can play still pictures (JPEG/TIFF), CD-DA, Video CD and Regarding DVD-Audio
MP3 format data recorded on CD-R/RW. Close the session or Some multi-channel DVD-Audio will prevent down-mixing (➡ 68)
finalize the disc after recording. of all or part of their contents if this is the manufacturer’s
≥Play may be impossible on some CD-R or CD-RW discs due to the intention. Tracks that are prevented from being down-mixed will
condition of the recording. not play properly on this unit (e.g. audio is played from the front
≥The producer of the disc can control how discs are played. So you two channels only). Refer to the disc’s jacket for more
may not always be able to control play as described in these information.
operating instructions. Read the disc’s instructions carefully.
RQT8023
8
EH50English.book Page 9 Tuesday, February 1, 2005 6:36 PM
Getting started
Indicated in
– these [SD]
instructions by
[-RW‹V›] before finalization [+R] before finalization
[DVD-V] after finalization [DVD-V] after finalization Data that can
be recorded Still pictures
Video Video and played
As one time recording discs for Instructions You can insert directly into the SD card slot.
As re-writable discs for backup
backup use (recordable until § A miniSD TM card adaptor included with the
use
the disc is full) miniSDTM card is necessary.
≥You can play and transfer (dub) still pictures
Approx. 8 hours Approx. 8 hours taken on a digital camera, etc. (➡ 34, 48).
≥You can set the DPOF (Digital Print Order
Only after finalizing the disc Only after finalizing the disc
Format) for automatic printing on your
(➡ 52, 68). (➡ 52, 68).
home printer or at a photo developing store
This unit is compatible with 1k– This unit is compatible with 1k– (➡ 42, 68).
4k recording speed discs. 8k recording speed discs.
≥Compatible with: FAT 12 or FAT 16
t t
Suitable SD Memory Cards
t t ≥You can use SD Memory Cards with the following capacities (from
8 MB to 1 GB).
t t
Only one is recorded.(➡ 56, Only one is recorded.(➡ 56, 8 MB, 16 MB, 32 MB, 64 MB,
Select MTS) Select MTS) 128 MB, 256 MB, 512 MB, 1 GB (Maximum)
t (The picture is recorded in t (The picture is recorded in
Please confirm the latest information on the following website.
4:3 aspect.) 4:3 aspect.)
http://panasonic.co.jp/pavc/global/cs
Y Y
(This site is in English only.)
Y (Disc space increases only when Y (Available space does not ≥If the SD Memory Card is formatted on other equipment, the time
the last recorded title is erased.) increase after erasing.)
spent for recording may become longer. Also if the SD Memory
t t Card is formatted on a PC, you may not be able to use it on this
unit.
≥We recommend using Panasonic discs and cards. We also
recommend using DVD-RAM discs with cartridges to protect them In these cases, format the card on this unit (➡ 51, 68).
from scratches and dirt. ≥This unit supports SD Memory Cards formatted in FAT 12 system
≥Discs from other manufacturers may not be recorded or played due and FAT 16 system based on SD Memory Card Specifications.
to the condition of the recording. ≥We recommend using a Panasonic SD card.
≥You may not be able to record to DVD-R, DVD-RW and +R discs on
this unit or play them due to the condition of the recording. Structure of folders displayed by this unit
≥You cannot record programs that allow “One time only recording” to
CPRM compatible DVD-R and DVD-RW on this unit. You can The following can be displayed on this unit.
record other programs as DVD-Video format. ¢¢¢: Numbers XXX: Letters
DVD-RAM Card
[CD] [VCD] §
DCIM XXXX¢¢¢¢.JPG
Recorded audio and CD-R and CD-RW Recorded music XXXX¢¢¢¢.TIF
music (including CD- with music recorded and video ¢¢¢XXXXX
R/RW) in MP3 (➡ 33) (including CD-R/
Still pictures (JPEG RW)
XXXX¢¢¢¢.JPG
and TIFF) recorded XXXX¢¢¢¢.TIF
on CD-R/RW
Remote control
Instructions for operations are generally described using the remote control.
INPUT SELECT TV/VIDEO CH VOLUME @ 7 Show Top menu/Direct Navigator (➡ 30, 38)
8 Smart Wheel (➡ below)
2 9 Skip the specified time/Display the television image as a picture-
in-picture (➡ 23, 32)
3 HDD DVD SD : Show sub menu (➡ 38)
AUDIO ; Create chapters (➡ 32)
1 2 3 A “Green” button for television program list (➡ 24)
4 F Rec
B
“Green” button for Direct Navigator (➡ 34)
4 5 6 < One touch transfer (dubbing) (➡ 44)
7 8 9
SETUP
C “Blue” button for television program list (➡ 24)
“Blue” button for Direct Navigator (➡ 30)
5
CANCEL VCR Plus+ CM SKIP D = Start recording (➡ 20)
0 > Change recording mode (➡ 20)
SKIP SLOW/SEARCH E ? Transmission window
@ Television operations (➡ 19)
6 A Select audio (➡ 22, 32)
STOP PAUSE PLAY/x1.3 B Start Flexible Recording (➡ 23)
C Show SETUP menu (➡ 54)
D Skip a minute forward (➡ 32)
F E Show VCR Plusr screen (➡ 26)
T V G U I DE
NU FU F Show television program list
7 G
ME
CT OR
NC
TIO
D
G
NS
DVD/TV
ENTER
[Note]
RQT8023 Press the Smart Wheel lightly when turning it.
If you press it strongly when turning it, [3, 4, 2, 1] may be mistakenly activated.
10
EH50English.book Page 11 Tuesday, February 1, 2005 6:36 PM
Main unit
1 2 3 4 5
Getting started
HDD DVD SD
DRIVE
DRI VE REC
POWER OPEN/CLOSE
SELECT
/x1.3
CH
6 7 8 9 : ; <
Opening the front panel
Press down on the
part with your finger.
7 8 9
1 e.g.,[HDD]
11
EH50English.book Page 12 Tuesday, February 1, 2005 6:36 PM
STEP 1 Connection
≥The equipment connections described are examples.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Peripheral equipment and optional cables sold separately unless otherwise indicated.
for playback when this unit is turned off. For optimum operation, it You can enjoy even higher fidelity, if your television has an
is recommended that this unit be connected as shown below. S-VIDEO IN or COMPONENT VIDEO IN terminals. (➡ 14)
≥Connection for transferring (dubbing) from video tape (➡ 14)
A to M are indexes for Spanish Quick Reference.
B Television A indicates included accessories.
D Cable from wall or indicates accessories not included.
antenna signal VHF/UHF AUDIO IN
RF IN R L VIDEO IN
F 75 ≠ coaxial cable
E Video cassette recorder
VHF/UHF OUT IN
RF IN
VIDEO VIDEO
OUT IN
AUDIO AUDIO
L L
AUDIO AUDIO
VHF/UHF R R
RF OUT
VHF / UHF
VH
RF RF
OUT IN
IN
C Red White Yellow
OUT1
IN1
Y PB PR
G-LINK
LINK
OUT2
IN3
OPTICAL
AC IN
COMPONENT
VIDEO OUT DIGITAL AUDIO OUT
R-AUDIO-L VIDEO S VIDEO R-AUDIO-L VIDEO S VIDEO (48
480p/
p/48 0i ) (PCM/BITSTREAM)
480i
J Cooling fan
It may take up to a minute if you want to record to a disc other than H This unit E VCR
a DVD-RAM, or to make other operations.
Getting started
for playback when this unit is turned off. For optimum operation, it You can enjoy even higher fidelity, if your television has an
is recommended that this unit be connected as shown below. S-VIDEO IN or COMPONENT VIDEO IN terminals. (➡ 14)
≥Connection for transferring (dubbing) from video tape (➡ 14)
A to W are indexes for Spanish Quick Reference.
A indicates included accessories.
B Television
D Cable from wall or indicates accessories not included.
antenna signal VHF/UHF AUDIO IN
RF IN R L VIDEO IN
G 75 ≠ coaxial
cable F Video cassette recorder
VHF/UHF OUT IN
RF IN
VIDEO VIDEO
OUT IN
AUDIO AUDIO
L L
AUDIO AUDIO
VHF/UHF R R
RF OUT
VHF / UHF
VH
RF RF
OUT IN
IN
C Red White Yellow
OUT1
IN1
Y PB PR
G-LINK
LINK
OUT2
IN3
OPTICAL
AC IN
COMPONENT
VIDEO OUT DIGITAL AUDIO OUT
R-AUDIO-L VIDEO S VIDEO R-AUDIO-L VIDEO S VIDEO (48
480p/
p/48 0i ) (PCM/BITSTREAM)
480i
O IR Blaster
OUT S Cable TV box
IN Insert the IR Blaster
jack into the G-LINK
R L VIDEO
terminal.
AUDIO S-VIDEO RF ≥Only use the N To household AC outlet
included IR Blaster. (AC 120 V, 60 Hz)
R Setting the IR Blaster ➡ below
∫ Should I use the AUDIO/VIDEO OUT terminal or ∫ Why should I connect the IR Blaster?
the RF OUT terminal? To download program listings, the TV Guide On ScreenTM system
If your cable TV box has both AUDIO/VIDEO OUT terminals and needs to be able to change channels on your cable box when the
RF OUT terminals, we recommend connecting the AUDIO/VIDEO unit is not in use. Please connect the supplied IR Blaster cable to
OUT terminal with the unit’s IN3 terminal. Using this connection the G-LINK jack of the unit. After you connect the IR Blaster cable
provides the better picture quality. you will be able to control your cable box using the unit’s remote
≥The S-VIDEO terminal achieves a more vivid picture than the control.
VIDEO terminal.
Setting the IR Blaster
Place the IR Blaster in front of the signal sensor of the cable TV box.
U If necessary, use the double sided adhesive tape (included) to
secure the IR Blaster to a flat surface.
T Read the cable TV box operating
V e.g. Television stand surface
instructions regarding positioning of the
signal sensor. W If you peel off the adhesive tape, the surface may
become damaged.
Once you have confirmed the cable TV box is
operating correctly, secure it by attaching the
adhesive tape.
S Cable TV box RQT8023
13
EH50English.book Page 14 Tuesday, February 1, 2005 6:36 PM
STEP 1 Connection
Connection for transferring (dubbing) from video tape
VHF/UHF OUT IN
RF IN
Yellow VIDEO
OUT
VIDEO
IN
White AUDIO
L
AUDIO
L
VHF/UHF
Red AUDIO
R
AUDIO
R
RF OUT
Audio/Video cable
VHF / UHF
VH
RF RF
OUT
Red White Yellow
IN
IN
OUT1
IN1
Y PB PR
G-LINK
LINK
OUT2
IN3
OPTICAL
AC IN
COMPONENT
VIDEO OUT DIGITAL AUDIO OUT
R-AUDIO-L VIDEO S VIDEO R-AUDIO-L VIDEO S VIDEO (48
480p/
p/48 0i ) (PCM/BITSTREAM)
480i
Television Television
VHF / UHF
VH VHF / UHF
VH
RF RF
IN
IN IN
IN
Y PB PR Y PB PR
G-LINK
LINK G-LINK
LINK
OUT2
OUT2
OPTICAL OPTICAL
COMPONENT COMPONENT
VIDEO OUT DIGITAL AUDIO OUT VIDEO OUT DIGITAL AUDIO OUT
VIDEO
EO S VIDEO R-AUDIO-L VIDEO S VIDEO (48
480p/
p/48 0i ) (PCM/BITSTREAM)
480i VIDEO
EO S VIDEO R-AUDIO-L VIDEO S VIDEO (48
480p/
p/48 0i ) (PCM/BITSTREAM)
480i
RQT8023
14
EH50English.book Page 15 Tuesday, February 1, 2005 6:36 PM
Getting started
Output” (➡ 56).
≥You cannot use DTS Digital Surround decoders not
suited to DVD.
Amplifier’s rear panel ≥Output is not digital with DVD-Audio; however, you can enjoy it in
analog (➡ left).
[For digital playback, set “Play DVD-Audio in Video Mode” (➡ 55)
AUDIO IN to “Video Mode (Video On)” when the DVD-Audio contains DVD-
R L
Video.]
Red White
OPTICAL IN
or
Audio cable
Optical digital audio cable
Do not bend sharply when
connecting.
VHF / UHF
VH
RF RF
OUT IN
IN
Red White
OUT1
IN1
Y PB PR
G-LINK
LINK
OUT2
IN3
OPTICAL
AC IN
COMPONENT
VIDEO OUT DIGITAL AUDIO OUT
R-AUDIO-L VIDEO S VIDEO R-AUDIO-L VIDEO S VIDEO (48
480p/
p/48 0i ) (PCM/BITSTREAM)
480i
Other antenna connections to the unit Other antenna connections to the television
Use one of the following connections to suit the antenna lead. Use one of the following connections to suit the antenna terminals
≥If your television has both lead and coaxial VHF terminals, use on your television. Refer to the television’s operating instructions.
the lead connection to minimize signal loss. ∫ A twin lead and coaxial plug terminal
∫ A single twin lead
VHF/UHF band separator VHF
from the antenna 300–75 ≠ transformer
UHF
(Flat) Twin lead 75 ≠ coaxial cable
To this unit’s RF IN Television
300 ≠ cable
terminal
∫ A twin lead terminal
∫ A twin lead and a coaxial cable VHF or
75–300 ≠ transformer
UHF
from the antenna
75 ≠ coaxial cable
VHF/UHF band mixer Television
(Flat) Twin lead 300 ≠ cable
∫ Two twin lead terminals
To this unit’s RF IN VHF/UHF band separator VHF
(Round) terminal
UHF
75 ≠ coaxial cable 75 ≠ coaxial cable Television
15
EH50English.book Page 16 Tuesday, February 1, 2005 6:36 PM
POWER Í/ l
DVD POWER TV
POWER
Í DVD POWER Í
VOLUME
2
INPUT SELECT TV/VIDEO CH
CT OR
NC
TOP
T
NAVDIRE
IGA
USA
TIO
3,4,2,1
NS
ENTER Canada
SCHEDULE
E SLIP
ENTER
TIM
After plugging the unit into your household AC outlet and pressing
[Í DVD POWER] to turn the unit on for the first time, the unit starts ≥Cable service connected to this unit (Yes/No)
TV Guide On ScreenTM system setup.
DVD/TV Do you have cable service connected to this DVD Recorder?
IMPORTANT: The TV Guide On ScreenTM system must
be setup whether it is then used or not. You cannot use Yes
the scheduled recording feature unless this setup is No
completed.
When “No” is selected, a confirmation screen is displayed (➡ 17,
Only English is displayed in the TV Guide On “The set contents are displayed together”).
ScreenTM system. Other languages cannot be ≥Cable TV box connected to this unit (Yes/No)
displayed.
Is a cable box connected to this DVD Recorder?
TM
TV Guide On Screen system Yes
This unit features the TV Guide On ScreenTM system that
provides an 8-day grid of TV programs available in your area.
No
Use the TV Guide On ScreenTM system to choose TV programs When “No” is selected, a confirmation screen is displayed (➡ 17,
and simplify the recording of your favorite TV shows (➡ 24, 28, “The set contents are displayed together”).
29). Best of all this service is free!
≥If you receive your programming solely from a satellite service, If you do not want to use the TV Guide On ScreenTM system
the program guide in this unit will not receive program listings Select “No” at this point even if a cable TV box is connected.
or channel information. Without this information, program-
based recordings cannot be made. However, recordings can If you are using a cable TV box, set the following:
still be set manually. ≥Cable TV box connection channel (Ch2/Ch3/Ch4/IN3)
≥In order to cool the circuits used when downloading the –If you are connecting the cable TV box to this unit’s IN3 terminal,
television program list, the cooling fan may sometimes operate select “IN3”.
when the unit is turned off. This is not a malfunction. –If you are connecting the cable TV box to this unit’s RF terminal,
select “Ch2”, “Ch3” or “Ch4”, according to the cable TV box
Preparation setting.
≥Turn on the television and select the appropriate video input to ≥Cable TV box brand
suit the connections to this unit. –Move down with [4] for more brands.
≥When using the cable TV box, check the following. –You can also press [PAGE W] or [PAGE X] to skip one page.
–Make sure the IR Blaster is connected and positioned properly –Select “Not Listed” if you cannot find your brand on the list.
(➡ 13). ≥IR signal code
–Make sure the cable TV box is turned on. Make sure your cable TV box is set to the channel that appears
If further assistance is needed, on screen and press [ENTER].
In the U.S.A.: Contact Panasonic’s Customer Call Center at
Follow steps A and B below:
1-800-211-PANA (7262).
In Canada: Call 1-800-561-5505. A. Please tune your cable box to channel 02
B. Make sure to leave your cable box turned ON
RQT8023
16
EH50English.book Page 17 Tuesday, February 1, 2005 6:36 PM
for this phase of the setup to be repeated numerous times. more than one channel TODAY
Last
Channel
87
8:00PM 8:30PM
NWGB
No
To use immediately (Set Clock Manually)
Test this code again
Getting started
Set the clock manually.
–If the cable TV box has changed to channel 09, select “Yes” and Please note that the program list is not displayed until the unit
press [ENTER]. downloads it. Scheduled recording is only possible manually.
–If the cable TV box is still set to the same channel, select “No” 1 Press [SETUP].
and press [ENTER]. Repeat this step until the cable TV box 2 Press [3, 4] to select “Setup” and press [1].
changes to channel 09. 3 Press [3, 4] to select “Clock Settings” and press [ENTER].
–If you want to try the code again for some reason, e.g., you 4 Press [3, 4] to select “Set Clock Manually” and press
accidentally moved the IR Blaster, select “Test this code again” [ENTER].
and press [ENTER].
SETUP Set Clock Manually
∫ The set contents are displayed together
Month Day Year Hour Minute
Zip code - 11111 (USA) Channel 1 / 1 / 2000 SAT 12 : 00 AM
Cable - Yes Setup
Cable box - No Disc
Video DST Time Zone
–If the information is correct, select “Yes, end setup” and press Audio Off EST
[ENTER]. Display
–If the information is not correct, select “No, repeat setup TV Screen ENTER
process” and press [ENTER] to start the setting again. 5 Press [2, 1] to select the item you want to change and press
Once you confirm the input content, the following screen appears. [3, 4] to change the setting.
6 Press [ENTER].
What would you like to do now? The clock starts.
7 Press [SETUP].
Watch TV
≥DST (Daylight Saving Time): On or Off
3 Press [ENTER]. If you select “On”, the clock is advanced one hour starting at 2
a.m. on the first Sunday in April and ending at 2 a.m. on the last
A television reception screen or a blue background screen is
Sunday in October.
displayed.
≥Time Zone shows the time difference from Greenwich Mean Time
If you do not want to use TV Guide On ScreenTM system
(GMT).
➡ 57, Auto channel/clock settings
EST (Eastern Standard Time) l GMT j5
4 Press [Í DVD POWER]. CST (Central Standard Time) l GMT j6
MST (Mountain Standard Time) l GMT j7
“BYE” appears briefly and then “12:00A” flashes on the
PST (Pacific Standard Time) l GMT j8
unit’s display. The unit is now in standby mode and ready to
AST (Alaska Standard Time) l GMT j9
download the channel line-up and the program listings.
HST (Hawaii Standard Time) l GMT j10
Check the following again, so the downloading will not fail.
If you connect a cable TV box
In the United States, TV GUIDE and other related marks are
≥the output terminal of the cable TV box is connected to this
registered marks of Gemstar-TV Guide International, Inc. and/or
unit’s RF IN or IN3 terminal (➡ 13)
one of its affiliates. In Canada, TV GUIDE is a registered mark of
≥the IR Blaster is correctly connected and installed (➡ 13)
Transcontinental Inc., and is used under license by Gemstar-TV
≥the cable TV box is turned on
Guide International, Inc. TV Guide On Screen, G-LINK, VCR
If you do not connect a cable TV box
Plusr and PlusCode are registered marks of Gemstar-TV Guide
≥the antenna cable is connected to this unit’s RF IN terminal
International and/or one of its affiliates.
(➡ 12)
5 Leave this unit in the standby mode. The TV Guide On Screen and VCR Plusr systems are
manufactured under license from Gemstar-TV Guide
It is strongly recommended that you wait at least 24 hours
International, Inc. and/or one of its affiliates.
before using the unit. No damage will occur if the unit is
used sooner, but the channel line-up and program listings GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/OR
may not have been fully downloaded.
ITS RELATED AFFILIATES ARE NOT IN ANY WAY
≥If you connect a cable TV box, leave it switched on without
using it.
LIABLE FOR THE ACCURACY OF THE PROGRAM
≥With some cable TV boxes, the cable TV box remote SCHEDULE INFORMATION PROVIDED BY THE TV
control can turn on and off both the cable TV box and the GUIDE ON SCREEN SYSTEM. IN NO EVENT SHALL
television. Utilizing this feature (turning the cable TV box GEMSTAR- TV GUIDE INTERNATIONAL, INC. AND/OR
off) will prevent the channel line-up from being ITS RELATED AFFILIATES BE LIABLE FOR ANY
downloaded. AMOUNTS REPRESENTING LOSS OF PROFITS,
≥If the unit’s display changes from flashing “12:00A” to the LOSS OF BUSINESS, OR INDIRECT, SPECIAL, OR
current time, you can set scheduled recording manually CONSEQUENTIAL DAMAGES IN CONNECTION WITH
(➡ 25). THE PROVISION OR USE OF ANY INFORMATION,
≥If the unit's display does not change to the current time even EQUIPMENT, OR SERVICES RELATING TO THE TV
after waiting, we recommend that you set the clock using “Set GUIDE ON SCREEN SYSTEM.
Clock Manually” (➡ right).
The TV Guide On Screen and VCR Plusr systems are protected
If you find “There is no data for this screen” displayed on the by one or more issued United States patents such as 6,331,877;
television when you turn the unit on, the unit has not yet 6,239,794; 6,154,203; 5,940,073; 4,908,713; 4,751,578;
downloaded the channel line-up. 4,706,121; 6,466,734; 6,430,359; 6,091,882; 6,049,652;
5,335,079; 5,307,173; 6,498,895; 6,418,556. RQT8023
17
EH50English.book Page 18 Tuesday, February 1, 2005 6:36 PM
HDD DVD SD
Numbered
1 2 3
AUDIO
F Rec
1 Press [SETUP].
buttons
4 5 6
SETUP 2 Press [3, 4] to select “TV Screen”
7 8 9 SETUP
CANCEL VCR Plus+ CM SKIP and press [1].
0
SKIP SLOW/SEARCH
3 Press [3, 4] to select “TV Type” and
STOP PAUSE PLAY/x1.3
press [ENTER].
SETUP TV Type
TV G U I D E 4:3 TV
NU FU Aspect 4:3 & 480i
ME
CT OR
NC
TOP
T
NAVDIRE
IGA
TIO
4:3 16:9
RQT8023
18
EH50English.book Page 19 Tuesday, February 1, 2005 6:36 PM
Getting started
While pressing [Í POWER TV] enter Use “1”, the factory set code, under normal circumstances.
the code with the numbered buttons.
e.g., 01: [0] ➡ [1] 10: [1] ➡ [0] 1 Press [SETUP].
Manufacturer and Code No.
2 Press [3, 4] to select “Setup” and
PHILIPS (RC-5) 03
Panasonic press [1].
National
QUASAR
01/02 RCA 05
3 Press [3, 4] to select “Remote
SAMSUNG 14/18/19
Control Code” and press [ENTER].
FISHER 10 SANYO 10
4 Press [3, 4] to select the code (1, 2,
GE 05 SHARP 06/07 or 3) and press [ENTER].
GOLDSTAR 15/16/17 SONY 08 SETUP Remote Control Code
RQT8023
19
EH50English.book Page 20 Tuesday, February 1, 2005 6:36 PM
OPEN/CLOSE DRIVE
DRI VE
SELECT REC
unit to open the tray and insert a disc.
≥Press the button again to close the tray.
/x1.3
CH
DVD POWER TV
POWER
Í
CH VOLUME
INPUT SELECT TV/VIDEO
1
Numbered F Rec Insert fully so it clicks into place.
4 5 6
buttons SETUP
9
7
CANCEL
8
0
VCR Plus+ CM SKIP 3 Press [W X CH] to select the channel.
SKIP SLOW/SEARCH
CH DC BS DUB EXT Link MPEG4 D.MIX NET XPDVD- AVCD
HDD SP - + RWRAM
; DVD LP VR
STOP PAUSE PLAY/x1.3 SD EP SDPC
∫
TV G U I D E To select with the numbered buttons:
NU FU
3 Antenna Mode CableTV Mode
ME
CT OR
NC
TOP
T
NAVDIRE
IGA
TIO
∫ To stop recording
Press [∫].
≥From the start to the end of the recording is called one title.
≥[-R] [-RW‹V›] [+R] It takes about 30 seconds for the unit to complete
recording management information after recording finishes.
RQT8023
20
EH50English.book Page 21 Tuesday, February 1, 2005 6:36 PM
Recording
play) ≥The unit display changes as shown below.
0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00 "# 4:00
FR (Automatic 177 hours 8 hours 8 hours 8 hours
mode selection) maximum maximum maximum maximum ^"""""""""""" Counter (cancel) ,"""""""""""}
for one ≥This does not work during scheduled recordings (➡ 24) or while
side using Flexible Recording (➡ 22).
§1
≥If you change the channel or recording mode while recording is
It is not possible to record or play continuously from one side of a
paused, the time specified to stop recording is cancelled.
double sided disc to the other.
§2 When “Recording Time in EP Mode” is set to “EP (6H)” in the ≥The unit does not turn off automatically after the time to stop
SETUP menu (➡ 55). recording is reached.
The sound quality is better when using “EP (6H)” than when using To cancel
“EP (8H)”. Press [¥ REC] several times until the counter appears.
≥The time to stop recording is cancelled; however, recording
≥[RAM] When recording to DVD-RAM using EP (8H) mode, play may
continues.
not be possible on DVD players that are compatible with DVD-
RAM. Use EP(6H) mode if playback may be on other equipment. To stop recording partway
Press [∫].
FR (Flexible Recording Mode)
You can set FR (Flexible Recording) mode when transferring
(dubbing) or programming scheduled recordings. Off Timer
The unit automatically selects a recording rate between XP and EP The unit switches to standby after about 6 hours in the stop mode.
(8H) that will enable the recordings to fit in the remaining disc space
You can turn this feature off or change the time to 2 hours (➡ 54, “Off
with the best possible recording quality.
For example with a 90 minute recording to an unused DVD-RAM, the Timer”).
picture quality is adjusted to between “XP” and “SP”.
≥When recording to the HDD, picture quality is automatically When using DVD-RW
adjusted to precisely fit a transferred (dubbed) title on a 4.7 XP
SP
GB disc. LP When you insert a new DVD-RW or a DVD-RAM/DVD-RW (DVD-
≥All the recording modes from XP to EP appear in the EP
Video format) recorded on a computer or other equipment, a format
display. confirmation screen is displayed. Format the disc to use it. However,
all the recorded contents are erased.
Before recording
Format
≥It is not possible to record to both HDD (Hard Disk Drive) and DVD
The disc is not formatted properly.
drive simultaneously. Do you want to format the
≥It is not possible to record continuously from one side of a double disc in Disc Management?
sided disc to the other. You will need to eject the disc and turn it
over. Yes No
≥It is not possible to record digital broadcasts that allow “One time
only recording” onto DVD-R, DVD-RW, +R or 8 cm (3″ ) DVD-RAM ENTER
RQT8023
21
EH50English.book Page 22 Tuesday, February 1, 2005 6:36 PM
buttons 4 5 6
SETUP
F Rec Press [3, 4] to select “On” and press
7 8 9 SETUP
CANCEL VCR Plus+ CM SKIP
[ENTER].
0 ≥When recording MTS broadcasts (➡ below)
SKIP SLOW/SEARCH
CT OR
NC
TOP
DIRECT
T
NAVDIRE
IGA
TIO
3,4,2,1
NS
NAVIGATOR
ENTER To start recording
SCHEDULE
E SLIP
ENTER
≥Recording television program (➡ 20)
Recording
TIM
Press [SETUP].
However there will be 30 minutes remaining
2 Press [3, 4] to select “Disc” and
4.7GB
DVD-RAM
disc space.
press [1]. If you select “FLEXIBLE RECORDING” the program will fit
3 Press [3, 4] to select “Settings for one disc perfectly.
Recording
Press [∫].
recording time.
≥You can also set the recording time with the numbered To exit the Direct Navigator screen
buttons. Press [DIRECT NAVIGATOR].
≥You cannot record for more than 8 hours.
Press [1] (PLAY) during recording. The image currently being recorded
≥There is no sound output while searching forward or backward. ≥Play starts from 30 seconds previous.
≥You will hear the playback audio.
To stop play
Press [∫].
2 Press [3, 4] to select the time and
press [ENTER].
To stop recording ≥Each time you press [3, 4], the time increases [3] or
2 seconds after play stops decreases [4] by 1 minute.
Press [∫]. (Press and hold for 10-minute intervals.)
≥Press [1] (PLAY) to show the play images in full. Press
To stop scheduled recording [TIME SLIP] to show the play and recording images.
Press [∫], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the main unit for more than 3
To stop play
seconds to stop recording.
Press [∫].
To stop recording
2 seconds after play stops
Press [∫].
Scheduled recording
DVD POWER TV
3 Press the “Green” button.
POWER
Í DVD POWER Í “ R ” appears in the list to indicate that the program is set for
INPUT SELECT TV/VIDEO CH VOLUME scheduled recording.
≥Press the “Green” button to cancel.
≥Press the “Blue” button to change recording frequency.
HDD DVD SD
AUDIO Each time you press the button:
1 2 3 [. R Records only once.
Numbered F Rec l ;
4 5 6
buttons SETUP
l RR Records when the broadcast time and program
7 8 9 l name match.
CANCEL VCR Plus+ CM SKIP
l ;
0
SKIP SLOW/SEARCH l RW Records weekly.
l ;
{ Temporarily cancels the scheduled recording
R
∫ STOP PAUSE PLAY/x1.3 without deleting the program setting.
Recording
T OR
recorded to the HDD in the recording mode selected by the
NC
NAV IREC
TOP
T
IGA
TIO
D
ENTER SCHEDULE
SCHEDUL
E SLIP
∫ To cancel recording when it has already begun ≥To change the recording drive
Press [∫], then [ENTER] within 5 seconds. Press [3, 4] to select “Destination” and press the “Blue”
≥You can also press and hold [∫] on the main unit for more than 3 button.
seconds to stop recording. Each time you press the button:
≥There may be some channels that are not displayed in the HDD ,-. DVD
television program list even if they are receivable. In this case set
them manually (➡below). When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
Manually programming scheduled “HDD” (➡ 27, Relief Recording).
recordings
≥You can manually set the date, channel, start and end times and so
4 Press [ENTER].
on for programs you want to record. MESSAGES SCHEDULE LISTINGS
Recording
NWBG
MESSAGES SCHEDULE LISTINGS SP
HDD REMOVE FREQUENCY INFO.
FAVORITES RECORD 1:00 1:55
l ;
RD Records daily (From Monday to Friday).
l
Date : 4 / 1 / 05
Start Time : 8 : 00 pm
l ;
{ Temporarily cancels the scheduled recording
End Time : 10 : 00 pm R
Channel : 56 without deleting the program setting.
Quality : SP
Destination : HDD ≥To program other recordings
PlusCode : =========
Press [3, 4, 2, 1] to select “RECORD” and repeat steps
2–4.
RQT8023
25
EH50English.book Page 26 Tuesday, February 1, 2005 6:36 PM
Scheduled recording
TV G U I D E TV GUIDE
NU FU
∫ To check, change or delete a program ➡ 27
ME
T OR
NC
NAV IREC
TOP
T
IGA
TIO
D
NS
3,4,2,1 ≥You can also press and hold [∫] on the main unit for more than 3
SUB MENU RETURN ENTER
SUB MENU S CH seconds to stop recording.
CREATE Info
DUBBING DUBBING CHAPTER Info STATUS
“Blue” PAGE
Preparation
Entering PlusCode® numbers is an easy way of scheduling
recording. You can find them in TV listings in newspapers and
magazines.
≥You can enter up to 8 days in advance.
≥VCR Plusi system works only after this unit downloads the
television program list (➡ 16).
Date : 4 / 1 / 05
Start Time : 8 : 00 pm
End Time : 10 : 00 pm
Channel : 56
Quality : SP
Destination : HDD
PlusCode : =========
4 Press [ENTER].
MESSAGES SCHEDULE LISTINGS
FAVORITES RECORD
Sat 1:00pm NWBG Once R
87
NWBG
SP
HDD REMOVE FREQUENCY INFO.
1:00 1:55
26
EH50English.book Page 27 Tuesday, February 1, 2005 6:36 PM
Recording
immediately one after the other, the unit cannot record the part
at the ending of the earlier program (approximately 15
2 Press [3, 4] to select the program. seconds). In addition, when recording to DVD-R, DVD-RW
(DVD-Video format) or +R, the unit cannot record the part at the
Channel or program name (a program name that was set beginning of the later program (approximately 15 seconds).
for scheduled recording using TV Guide On ScreenTM
Program Program Not recorded
system or VCR Plusi system that was listed in the
program list) [-R] [-RW‹V›] [+R]
Recorded Recorded
Sat 1:00pm NWBG Once R
87 Not recorded
NWBG
SP ≥If you set DST (Daylight Saving Time) to ON when manually
HDD
1:00 1:55 REMOVE FREQUENCY INFO. setting the clock (➡ 17), scheduled recording may not work
when summer switches to winter and vice versa.
Recording mode (➡ 21) Frequency (➡ 24, Step 3,
Recording drive ➡ 25, Step 4) ∫ Relief Recording
When the recording drive is set to “DVD” for scheduled
recording and if the program will not fit onto the disc, the
recording drive will be changed to the “HDD” automatically.
If there is no disc in the tray or the disc cannot be recorded on or
∫ To change the recording frequency when scheduled recording starts while transferring (dubbing), the
Press the “Green” button. recording drive will be changed to the HDD.
≥The Direct Navigator shows which programs were relief-
∫ To change the time, recording mode and recorded (“ ” is displayed.)(➡ 30).
recording drive ≥If the time remaining on the HDD is insufficient, as much of the
Press [ENTER]. (➡ 24, To change the setting, step 4) program as possible will be recorded onto the HDD.
Recorded
RQT8023
27
EH50English.book Page 28 Tuesday, February 1, 2005 6:36 PM
l ;
Icons l A program becomes a “Favorite” when the
Stereo l R broadcast time and program name match.
Closed caption l ;
R
Re-run l Registers as a “Favorite” weekly.
l W
Programs are categorized by color. l ;
Green: Sports Blue: Children’s { “Favorite” registration temporarily off.
Purple: Movies Teal: Other categories
≥Press the “Blue” button to cancel.
∫ To change to the selected channel Repeat the above to set other programs.
Press [ENTER].
While recording, you cannot change from the channel being recorded. ≥When there is more than one program registered as “Favorite” in
the same time frame, each time you press the “Blue” button, the
2 Press [SUB MENU] to go to the program switches to the other.
Navigation menu.
SORT screen
3 Press [2, 1] to select the item and The SORT screen displays program listings sorted into your
preferred categories. You can register programs on the list for
press [4]. recording or as a “Favorite”, and jump directly to the program
One of the following screens will appear depending on the channel through a one-touch button.
item selected. There are various categories, such as movies, sports, children’s,
LISTINGS SORT PROMOTIONS educational, news, variety, series, HDTV, and alphabetically. Each
SCHEDULE MESSAGES SETUP category will contain individual sub-categories.
Common operations 1 Press [2, 1] to select the major category and press [4].
[3, 4, 2, 1] Select/Enter 2 Press [3, 4, 2, 1] to select the minor category and press
[ENTER] [ENTER].
[PAGE W][PAGE X] Skip one screen 3 Press [3, 4, 2, 1] to select a program.
≥When sorting alphabetically, programs with the same name
[SUB MENU] Move to the Navigation menu (such as reruns or subsequent broadcasts of the same
[CREATE “Green” Action Button program) are displayed together in one column. In this case,
CHAPTER] The Action Button functions will be press [3, 4] to select a program name and press [ENTER].
(Green) displayed on the screen. Each broadcast of the program is then displayed separately.
Press [3, 4] to select the desired program.
[DUBBING] “Blue” Action Button
(Blue) The Action Button functions will be Functions of Action Buttons
displayed on the screen. RECORD: Record this program (➡ 24, Step 3)
[Info] Change the size of information window FAVORITES: Register this program as a “Favorite”
(➡ above)
LISTINGS screen CANCEL REC./ Cancel recording or a “Favorite”
CANCEL FAV.:
The LISTINGS screen displays the station, title, time, length,
contents and ratings. It allows you to scroll through current and FREQUENCY: Change the frequency of recording or a
future program listings and register them for recording or as a “Favorite”
“Favorite”, and jump directly to the program channel through a one-
touch button.
SCHEDULE screen
Functions of Action Buttons
r24 Hours: Skip 24 hours forward The SCHEDULE screen displays programs registered for recording
or as a “Favorite” separately on the list. In addition to being able to
s24 Hours: Skip 24 hours backward
review the list, you can also remove programs and change the
LOCK: Lock the program currently selected in the frequency or modify the start/end times (only when recording) of
Video Window programs selected.
UNLOCK: The Video Window display will change as Functions of Action Buttons
different programs are highlighted SET TIMER: Show the manual scheduled recording
RECORD: Record this program (➡ 24, Step 3) screen (➡ 25, Step 2)
FAVORITES: Register this program as a “Favorite” CANCEL: Cancel an entry on the manual scheduled
(➡ right) recording screen
CANCEL REC./ Cancel recording or a “Favorite” FREQUENCY: Change the frequency of recording or a
CANCEL FAV.: “Favorite”
RQT8023
FREQUENCY: Change the frequency of recording or a REMOVE/STOP Remove the scheduled recording or
“Favorite” “Favorite” program/Stop scheduled
28 recording
EH50English.book Page 29 Tuesday, February 1, 2005 6:36 PM
Recording
Cable - Yes When there are unread messages, an envelope-shaped icon
Cable box - No appears at the upper left of the screen.
DRIVE
DRI VE REC
POWER OPEN/CLOSE
SELECT
/x1.3
CH
1 HDD DVD SD
007
008
---
10
8
10/27
10/27
Mon 1:30 PM
Mon 9:00 PM
1 2 3 AUDIO Play
S SUB MENU Select
Play
S SUB MENU Select
F Rec
Numbered 4 5 6 Switching the Direct Navigator appearance
SETUP
buttons 9 1 Press [SUB MENU] while Thumbnail Mode is displayed.
7 8
CANCEL VCR Plus+ CM SKIP 2 Press [3, 4] to select “Table Mode” and press [ENTER].
0 CM SKIP ≥The display appearance last used is saved even after the unit is
SKIP SLOW/SEARCH
turned off.
:,9 6,5
2 [HDD] [RAM] DIRECT NAVIGATOR Title View
HDD Video Picture
button to select
Playing back
T OR
TOP MENU,
NC
NAV IREC
TOP
T
IGA
TIO
D
DIRECT [HDD] To sort Title View for easy searching (Table Mode only)
NS
2;,;1
NAVIGATOR ENTER This function is convenient when searching for one title to
SCHEDULE
E SLIP
TIME SLIP
3,4,2,1 1 Press [SUB MENU].
SUB MENU RETURN ENTER 2 Press [3, 4] to select “Sort” and press [ENTER].
SUB MENU S CH
RETURN 3 Press [3, 4] to select the item and press [ENTER].
CREATE
DUBBING CHAPTER Info STATUS
If you select an item other than “No.”
“Blue” PAGE
REC REC MODE ERASE DISPLAY ≥The Direct Navigator screen will reappear after playback of the
PAGE selected title has finished. (You cannot play titles continuously.)
CREATE ERASE ≥Skip and Time Slip will only function with the title currently being
CHAPTER played back.
≥If you exit the Direct Navigator screen, or switch to the “Picture”
Preparation Direct Navigator screen, the sorted Title View will be cancelled.
≥Turn on the television and select the appropriate video input to suit
DVD/TV
the connections to this unit. 3 Press [3, 4, 2, 1] to select the title and press
≥Turn on this unit. [ENTER].
≥Press [RETURN] to exit the television program list if it is displayed You can also select titles with the numbered buttons.
on the television. To turn off auto start up of the television program [HDD] [RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
list ➡ 29, “Review options” menu e.g., 5: [0] ➡ [0] ➡ [5] 5: [0] ➡ [5]
15: [0] ➡ [1] ➡ [5] 15: [1] ➡ [5]
1 Press [HDD] or [DVD] to select the 115: [1] ➡ [1] ➡ [5]
To show other pages
playback drive. Press [3, 4, 2, 1] to select “Previous” or “Next” and press
The HDD or DVD indicator lights up on the unit.
[ENTER]. (Thumbnail Display only)
≥It is possible to watch playback from one drive while
≥You can also press [:, 9] to show other pages.
recording on another (editing is not possible).
30
EH50English.book Page 31 Tuesday, February 1, 2005 6:36 PM
Press [∫].
HDD PLAY
The stopped position is memorized. DVD
“PLAY” flashes in the unit’s display. (Excluding when playing from the Direct SD
Playing back
Resume play function
Press [1] (PLAY) to restart from this position.
Stopped position
≥If [∫] is pressed several times, “PLAY” disappears and the position is cleared.
≥The position is cleared if the unit is turned off or the tray is opened.
31
EH50English.book Page 32 Tuesday, February 1, 2005 6:36 PM
[HDD] [RAM] [-R] [-RW‹V›] [+R] Each time you press, play restarts approximately a minute later.
[-RW‹VR›]
1 Press [ERASE].
2 Press [2, 1] to select “Erase” and press [ENTER].
Erase ≥A title cannot be restored once it is erased. Make certain before proceeding.
[HDD] [RAM] [-R] [-RW‹V›] [+R] ≥You cannot erase while recording or transferring (dubbing).
≥[-R] [+R] Available space does not increase after erasing.
≥[-RW‹V›] Disc space increases only when the last recorded title is erased.
RQT8023
32
EH50English.book Page 33 Tuesday, February 1, 2005 6:36 PM
DVD [CD]
HDD DVD SD
AUDIO Preparation
1 2 3
F Rec
Press [DVD] to select the DVD drive.
Numbered 4 5 6
buttons SETUP
This unit plays MP3 files recorded on CD-R/RW designed for audio
7 8 9
CANCEL VCR Plus+ CM SKIP recording that are finalized (➡ 68) on a computer.
0 The screen shown below is displayed when you insert a disc
SKIP SLOW/SEARCH
containing MP3 files and still pictures (JPEG/TIFF).
:,9
STOP PAUSE PLAY/x1.3 Playback mode is set to MP3.
If you want to play picture (JPEG),
select JPEG Menu from Menu in FUNCTIONS.
TV G U I D E
NU FU
ME
T OR
NC
NAV IREC
TOP
T
IGA
ENTER
TIO
D
TOP MENU
NS
ENTER
SCHEDULE
E SLIP
3,4,2,1
SUB MENU
S
CREATE
CH
RETURN ENTER
RETURN
1 Press [TOP MENU].
DUBBING CHAPTER Info STATUS
PAGE
Selected group
REC REC MODE ERASE DISPLAY No. Group
Menu
PAGE G: Group No. G 1 1 : My favorite
Playing back
1/111 2 002 Lady Starfish
3 003 Life on Jupiter
tracks in all groups No. 4 004 Metal Glue
5 005 Paint It Yellow
0 – 9 6 006 Pyjamamama
DVD/TV Prev. 7 007 Shrimps from Mars
Regarding MP3 Next 8 008 Starperson
≥Compatible formats: ISO9660 level 1 or 2 (except for extended 9
10
009 Velvet Cuppermine
010 Ziggy Starfish
formats) and Joliet ENTER
Page 001/024
≥Maximum number of files (tracks) and folders (groups)
≥Files are treated as tracks and folders are treated as groups.
recognizable: 999 files (tracks) and 99 folders (groups)
≥This unit is compatible with multi-session but reading or play of
the disc may take time if there are a lot of sessions.
≥Operation may take time to complete when there are many files
2 Press [3, 4] to select the track and
(tracks) and/or folders (groups) and some files (tracks) may not press [ENTER].
display or be playable. Play starts on the selected track.
≥The display order on this unit may differ from how the order is ≥“0” indicates the track currently playing.
displayed on a computer. ≥You can also select the track with the numbered buttons.
≥Depending on how you create the disc (writing software), files e.g., 5: [0] ➡ [0] ➡ [5]
(tracks) and folders (groups) may not play in the order you 15: [0] ➡ [1] ➡ [5]
numbered them.
≥This unit is not compatible with packet-write format. To show other pages
Press [:, 9].
≥File format: MP3
Files must have the extension “.mp3” or “.MP3”.
To exit the screen
≥Bit rates: 32 kbps to 320 kbps
Press [TOP MENU].
≥Sampling frequency: 16 kHz/22.05 kHz/24 kHz/32 kHz/
44.1 kHz/48 kHz
Using the tree screen to find a group
≥This unit is not compatible with ID3 tags.
33
EH50English.book Page 34 Tuesday, February 1, 2005 6:36 PM
OPEN/CLOSE DRIVE
DRI VE REC
≥You can also press [:, 9] to show other pages.
SELECT
/x1.3
CH
DRIVE SELECT ∫
4 Press [3, 4, 2, 1] to select the still
picture and press [ENTER].
DVD POWER TV You can also select still pictures with the numbered buttons.
POWER
e.g.,
Í
CH VOLUME 5: [0] ➡ [0] ➡ [0] ➡ [5] 115: [0] ➡ [1] ➡ [1] ➡ [5]
INPUT SELECT TV/VIDEO
15: [0] ➡ [0] ➡ [1] ➡ [5] 1115: [1] ➡ [1] ➡ [1] ➡ [5]
HDD, DVD, SD ≥Press [2, 1] to display the previous or next still picture.
HDD DVD SD
AUDIO ≥Useful functions during still picture play (➡ 35).
1 2 3
F Rec
Numbered 4 5 6 To return to the Direct Navigator screen
buttons SETUP Press [∫].
7 8 9
CANCEL VCR Plus+ CM SKIP
To exit the screen
0
SKIP SLOW/SEARCH Press [DIRECT NAVIGATOR].
:,9
∫ To show the picture properties
STOP PAUSE PLAY/x1.3
∫ Press [STATUS] twice.
Playing back
NU
TV G U I D E Shooting date
FU
ME
T OR
DIRECT FUNCTIONS
NC
NAV IREC
TOP
T
IGA
TIO
11 / 10 6:53 PM
D
NAVIGATOR
NS
Playback
CD(MP3/JPEG)
MENU
VOL_200411291118
Playback Mode: MP3
3 [HDD] [RAM]
Schedule EPG TV GUIDE
screen
press [ENTER].
0001 0002 0003 0004
Menus
0005 0006 0007 0008
[HDD] [RAM] [SD] [CD] 1 Press DIRECT NAVIGATOR Picture (J desired folder and press Press ENTER to confirm.
[3, 4, 2, 1]
SD CARD
Folder 100__DVD
[ENTER].
0001 0002
to select
0005 0006
“Folder” and
press [SUB MENU].
2 Press [3, 4] to
Start Slide Show
select “Start Slide Interval Regarding still pictures (JPEG, TIFF)
Slide Show” and
press [ENTER]. [HDD] [RAM] [SD]
≥To change the display timing ≥Compatible formats: DCF§ compliant (Content recorded on a
1 Press [3, 4] to select “Slide Interval” in digital camera, etc.)
step 2 and press [ENTER]. § Design rule for Camera File system: unified standard
2 Press [2, 1] to select the desired timing established by Japan Electronics and Information Technology
Playing back
(0–30 seconds) and press [ENTER]. Industries Association (JEITA).
≥File format: JPEG, TIFF (non-compressed RGB chunky format)
Rotate 1 Press [SUB MENU]. ≥Number of pixels:34k34 to 6144k4096
[HDD] [RAM] [SD] [CD] 2 Press [3, 4] to Rotate Right
(Sub sampling is 4:2:2 or 4:2:0)
select “Rotate Rotate Left
≥This unit can handle a maximum of 3000 files and 300 folders
Right” or ENTER (including higher folders).
≥Operation may take time to complete when playing TIFF format
“Rotate Left” still pictures, or when there are many files and/or folders, some
and press [ENTER]. files may not display or be playable.
≥Rotation information will not be stored. ≥MOTION JPEG is not supported.
35
EH50English.book Page 36 Tuesday, February 1, 2005 6:36 PM
DVD POWER TV
Disc menu–Setting the disc content
POWER
Í
CH VOLUME Soundtrack§
INPUT SELECT TV/VIDEO
[HDD] [RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
HDD DVD SD The disc’s audio attributes appear.
AUDIO [DVD-V] [DVD-A]
1 2 3 Select the audio and language (➡ below, Audio attribute,
F Rec
4 5 6 Language).
SETUP
7 8 9 Subtitle§
CANCEL VCR Plus+ CM SKIP [DVD-V] [DVD-A]
0 Turn the subtitle on/off and select the language (➡ below,
SKIP SLOW/SEARCH
Language).
[HDD] [RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›] (Only discs that contain
STOP PAUSE PLAY/x1.3 subtitle on/off information)
Turn the subtitle on/off.
TV G U I D E ≥Subtitle on/off information cannot be recorded using this unit.
NU FU
≥If the subtitles overlap closed captions recorded on discs, turn
ME
T OR
FUNCTIONS
NC
NAV IREC
TOP
T
IGA
TIO
NS
ENTER
TIM
S
CREATE
DUBBING CHAPTER Info STATUS Change the number to select an angle.
PAGE STATUS
REC REC MODE ERASE DISPLAY Still-P (Still picture) [DVD-A]
PAGE DISPLAY
Selects the play method for still pictures.
Slide Show:Plays according to the default order on the disc.
Page: Select the still picture number and play.
≥RANDOM: Plays in random order.
Using on-screenDVD/TV
menus ≥Return: Returns to the default still picture on the disc.
PBC (Playback control ➡ 68) [VCD]
Common procedures
Indicates whether menu play (playback control) is on or off.
1 Press [DISPLAY]. §You may have to use the menus (➡ 31) on the disc to make
changes.
Disc Soundtrack 1 Î Digital 2/0 ch ≥The display changes according to the disc content. You cannot
Play change when there is no recording.
Subtitle Off
Video
Audio channel Stereo
Audio Audio attribute
Other
LPCM/PPCM/ÎDigital/DTS/MPEG: Signal type
k (kHz): Sampling frequency
Menu Item Setting
b (bit): Number of bits
≥Depending on the condition of the unit (playing, stopped, ch (channel): Number of channels
etc.) and disc contents, there are some items that you
cannot select or change. Language
2 Press [3, 4] to select the menu and ENG:
FRA:
English
French
SVE:
NOR:
Swedish
Norwegian
CHI:
KOR:
Chinese
Korean
press [1]. DEU: German DAN: Danish MAL: Malay
RQT8023
36
EH50English.book Page 37 Tuesday, February 1, 2005 6:36 PM
Video menu–Change the picture quality Other menu–Change the display position
Picture [HDD] [RAM] [-R] [-RW‹V›] [+R] [DVD-V] [DVD-A] [-RW‹VR›] [VCD] Position
To select the picture quality mode during play. 1 (Standard)–5: The higher the setting the lower the on-
≥Normal: Default setting screen menu moves.
≥Soft: Soft picture with fewer video artifacts
≥Fine: Details are sharper
≥Cinema: Mellows movies, enhances detail in dark scenes. FUNCTIONS window
≥User: You can make further adjustments.
By using the FUNCTIONS window you may access the main
Press [3, 4, 2, 1] to select “Detail picture
functions quickly and easily.
adjustment” and press [ENTER].
Contrast
Increases the contrast between light and dark parts of
1 While stopped
SCHEDULE
Adjusts the shade of the picture’s color. 2
1 3 VCR Plus+
Gamma
Increases the brightness of the center ranges to improve Dubbing DUBBING
Playing back
ENTER Other Functions
Integrated DNR
Reduces mosaic noise and character smudging. Functions displayed depend on the selected drive or type of
MPEG-DNR (When any item other than “User” is selected) disc.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [DVD-V] [DVD-A] [-RW‹VR›] [VCD] 2 Press [3, 4, 2, 1] to select an item
Reduces noise and picture degradation.
On ↔ Off
and press [ENTER].
≥If you select “Other Functions”, press [3, 4] to select an
Progressive§ (➡ 68) item and press [ENTER].
Select “On” to enable progressive output.
≥Select “Off” if the picture is stretched horizontally. To exit the FUNCTIONS window
≥When progressive output is on, closed captions cannot be Press [FUNCTIONS].
displayed.
Transfer§ [When “Progressive” (➡ above) is set to “On”.] Status messages
Select the method of conversion for progressive output to suit
the type of material being played (➡ 68, Film and video). Press [STATUS].
≥Auto1 (normal):
The display changes each time you press the button.
Detects 24 frame-per-second film content and
appropriately converts it. HDD Hard-Drive Selected drive/type of disc
≥Auto2: Compatible with 30 frame-per-second film content Rec. Recording or play status/input
in addition to 24 frame-per-second film content. Play channel
(Picture distortion may occur depending on the Stereo Audio type
content) DVD Rec. Recording drive/
≥Video: Select when using “Auto1” and “Auto2”, and the Transfer (dubbing) progress indicator
video content is distorted.
Line-in NR (Only when IN1, IN2 or IN3 is selected)
Title number and elapsed time during play/
Reduces video tape noise while transferring (dubbing). Recording mode Available recording time
Depending on the video tape, jittering may occur. Date and time and recording mode
≥Automatic:Noise reduction only works on picture input from
a video tape. 6/8 10:15 PM πRemain 0:50 XP
≥On: Noise reduction works for any video input. π T1 0:05.14 XP π T2 0:00.10 SP
≥Off: Noise reduction is off. Select when you want to
record input as is.
§
Only when you have selected “480p” in “TV Type” (➡ 18). Title number and elapsed time during
recording/Recording mode
Audio menu–Change the sound effect
V.S.S. [HDD] [RAM] [-R] [-RW‹V›] [+R] [DVD-V] [DVD-A] [-RW‹VR›] No display
(Dolby Digital, 2-channel or over only)
Enjoy a surround-like effect if you are using two front
speakers only.
≥Turn V.S.S. off if it causes distortion. (Check the surround
function on the connected equipment.)
≥V.S.S. does not work for SAP recordings.
Dialog Enhancer [RAM] [-RW‹V›] [+R] [DVD-V] [DVD-A] [-RW‹VR›]
(Dolby Digital, 3-channel or over only, including a center channel)
The volume of the center channel is raised to make dialog
easier to hear.
RQT8023
37
EH50English.book Page 38 Tuesday, February 1, 2005 6:36 PM
Editing titles/chapters
SETUP
2 [HDD] [RAM]
7
CANCEL
8 9
VCR Plus+ CM SKIP
Press the “Blue” button to select “Video”.
SKIP
0
SLOW/SEARCH
3 Press [3, 4, 2, 1] to select the title.
:9
DIRECT NAVIGATOR Title View Title View screen
; HDD
Video Picture
1
10 10/27 Mon 8 10/27 Mon
T OR
NC
NAV IREC
TOP
T
IGA
TIO
D
DIRECT
NS
Chapter
Title Name
Change Thumbnail
Properties
(➡ 32, 39) Divide Title
Edit Title
Title
View Chapters
[HDD] ---
0:00.00
--- --- ---
–Titles: 500
--- --- --- ---
–Chapters: Approximately 1000 per title
(Depends on the state of recording.)
≥To show other pages/Multiple editing (➡ above)
[RAM] [-R] [-RW‹V›] [+R]
–Titles: 99 ([+R] 49 titles) 7 Press [SUB MENU], then [3, 4] to
–Chapters: Approximately 1000 ([+R] Approximately 254)
(Depends on the state of recording.)
select the operation and press [ENTER].
[Note] Erase Chapter
≥Once erased, divided or shortened, recorded content cannot be Create Chapter
Refer to “Chapter
restored to its original state. Make certain before proceeding. Combine Chapters
operations” (➡ 39).
≥You cannot edit during recording or transferring (dubbing), etc.
View Titles
≥Restricted recording information remains even after editing (e.g.
dividing a title, etc).
≥You can go back to the Title View.
Preparation
≥Turn on the television and select the appropriate video input to suit
the connection to this unit.
≥Turn the unit on.
≥Press [HDD] or [DVD] to select the drive containing the recorded
RQT8023 title to be edited.
≥[RAM] Release protection (➡ 50).
38
EH50English.book Page 39 Tuesday, February 1, 2005 6:36 PM
Title operations
After performing steps 1–5 (➡ 38)
--- ---
You can remove unnecessary part of the recording such as commercials. DIRECT NAVIGATOR Shorten Title
1 Press [ENTER] at the start point and end point of the HDD Video Picture
editing”) 3 Press [2, 1] to select “Erase” and press [ENTER]. Start End
- -:- -.- - - -:- -.- -
ENTER
You can change the image to be shown as the thumbnail picture in the Title View. DIRECT NAVIGATOR Change Thumbnail
Video Picture
1 Press [1] (PLAY) to start play. HDD
008
Editing
Change Thumbnail 2 Press [ENTER] when the image you want to use as a Change
0:00.01
(➡ below, “For quicker To change the thumbnail Change Start play and select
editing”) Restart play and press [3, 4] to select “Change”, then press [ENTER] at ENTER
0:01.05
the thumbnail position
008 Play
Press [3, 4] to select “Preview” and press [ENTER]. (The unit plays 10
Divide
[HDD] [RAM] -- : -- . --
Select the point where you want to start a new chapter while viewing the DIRECT NAVIGATOR Create Chapter
Video Picture
title. HDD
Create
[HDD] [RAM] ≥Repeat this step to divide at other points. Exit
(➡ below, “For quicker 2 Press [3, 4] to select “Exit” and press [ENTER]. 0:43.21
editing”)
ENTER
SETUP
4 Press [3, 4, 2, 1] to select “Create”
7
CANCEL
8 9
VCR Plus+ CM SKIP
and press [ENTER].
0
SKIP SLOW/SEARCH PLAYLISTS Playlist View
HDD
-- -- --
-- -- --
TV G U I D E
NU FU FUNCTIONS
ME
T OR
NC
NAV IREC
TOP
T
IGA
TIO
D
5
NS
ENTER
SUB MENU RETURN ≥Press [ENTER] to select all the chapters in the title, then
SUB MENU S CH RETURN skip to step 7.
CREATE
DUBBING CHAPTER Info STATUS
PAGE
PLAYLISTS Create
REC REC MODE ERASE DISPLAY HDD
001 8 10/27 Mon
You can arrange the chapters (➡ 38) to create a playlist. Source Title Page 001/001
001 002 --- ---
Title Title
Source Chapter Page 001/001
Chapter Chapter Chapter Chapter Chapter 001 002 003 ---
HDD
≥Playlists are not recorded separately so this doesn’t use much 001 8 10/27 Mon
Source Title Page 001/001
001 002 --- ---
capacity.
≥Editing chapters in a playlist does not modify the source titles Source Chapter Page 001/001
001 002 003 ---
and source chapters.
Chapters in Playlist Page 001/001
[HDD] [RAM] --- --- --- ---
title to be edited.
≥[RAM] Release disc or cartridge protection (➡ 50). ENTER
Press RETURN to exit.
≥You cannot create or edit a playlist while recording or while
transferring (dubbing). ≥Press [3] to select other source titles.
≥Repeat steps 6–7 to add other chapters.
1 While stopped
8 Press [RETURN].
Press [FUNCTIONS]. All the selected scenes become the playlist.
2 Press [3, 4] to select “Other
To return to the previous screen
Functions” and press [ENTER]. Press [RETURN].
FUNCTIONS HDD
HDD Disc Space Left 52:00 SP
To exit the screen
Playback DIRECT NAVIGATOR PLAYLISTS
Press [RETURN] several times.
FLEXIBLE RECORDING
Dubbing DUBBING
RQT8023
40
EH50English.book Page 41 Tuesday, February 1, 2005 6:36 PM
playlist. ENTER
≥To show other pages/Multiple editing (➡ 38) Playlist ➡ 53, Entering text
Editing
press [ENTER].
[HDD] [RAM]
Create §
Multiple editing is possible.
Copy Refer to “Playlist
Playlist Name operations”.
Erase Playlist
Properties Change Thumbnail Chapter operations
Edit [HDD] [RAM]
View Chapters After performing steps 1–7 (➡ left)
≥Editing chapters in a playlist does not modify the source titles and
source chapters.
If you select “View Chapters”
Add ➡ 40, Creating playlists, Step 5–7
6 Press [3, 4, 2, 1] to select the chapter. Chapter
To start play ➡ Press [ENTER].
To edit ➡ Step 7. Press [3, 4, 2, 1] to select the
PLAYLISTS Chapter View Chapter position to insert the chapter and
HDD
View press [ENTER].
01 10/27 Mon 0:30
screen
001 002 --- --- Move PLAYLISTS
HDD
Move Chapter
---
0:53.01
T OR
NC
NAV IREC
TOP
T
IGA
TIO
D
DIRECT
NS
Erase Picture
NAVIGATOR ENTER
SCHEDULE
E SLIP
Setup Protection
below
3,4,2,1 Cancel Protection
TIM
ENTER DPOF
SUB MENU RETURN
SUB MENU S CH RETURN Editing titles/chapters and playing chapters
CREATE Other View
DUBBING CHAPTER Info STATUS ➡ 38, Step 2
PAGE
“Green” REC REC MODE ERASE DISPLAY
PAGE ∫ To edit still picture folders
In step 3 (➡ above)
[HDD] [RAM] [SD] 1 Press [3, 4, 2, 1] to select “Folder” and press [ENTER].
≥You can use SD Memory Cards with capacities from 8 MB to 1 GB 2 Press [3, 4] to select the folder.
(➡ 9). DVD/TV
≥To show other pages/Multiple editing (➡ above)
3 Press [SUB MENU], then [3, 4] to select the operation and
Preparation press [ENTER].
≥Press [HDD], [DVD] or [SD] to select the drive. Erase Entire Folder
≥[RAM] [SD] Release protection (➡ 50, Setting the protection). Folder Name
Setup Protection
Editing
Setup Protection§ If set, this will protect the still picture or folder from accidental erasure.
DIRECT NAVIGATOR Pic
Cancel Protection§ Press [2, 1] to select “Yes” and press [ENTER]. SD CARD
Folder 103__
[HDD] [RAM] [SD] The lock symbol appears when the still picture or folder is protected. 0001 0002
≥Even if the protection setting is used by this unit to protect a folder, the folder
may be erased by another unit. 0005 0006
§ You can select a whole folder or individual pictures for printing and specify the
DPOF DPOF
The DPOF mark appears. (This appears on the still pictures inside a folder when you make the
DPOF setting for the folder.)
To cancel the print setting
Set the number of print to “0”.
≥Print settings (DPOF) made using this unit may not be viewable on other equipment.
≥When this is set by this unit, any settings established by other units will be released.
≥Settings cannot be made for folders and files not in accordance with DCF standards or if there is no
RQT8023
remaining space on the card.
42 §
Multiple editing is possible.
EH50English.book Page 43 Tuesday, February 1, 2005 6:36 PM
Normal speed mode: Select XP, SP, LP, EP or FR as the recording mode for transferring (dubbing) (➡ 21).
∫ Transferring (dubbing) mode
Transferring (dubbing) a title or a playlist Transferring (dubbing) multiple titles and playlists together
One Touch Transfer (dubbing) (➡ 44) Transferring (dubbing) using the transferring (dubbing) list (➡ 44)
You can select transferring (dubbing) speed mode and picture quality (➡below)
∫ Transferring (dubbing) speed mode types and features
High speed Normal speed (XP, SP, LP, EP, FR)
Features You can transfer (dub) in a very short amount You can record for a long period of time on 1 disc.
of time. You can transfer (dub) even faster if For example, using LP mode, you can record approximately 4
you use a high speed recording compatible hours on 1 (4.7 GB) disc (➡ 21).
disc. e.g., 1 hour TV drama
You can record and play using the HDD while
high speed transferring (dubbing). XP Only one episode using XP mode
Transferring (dubbing) ➡ below, Approximate transferring (dubbing) The same amount of time it takes to record the source
times times
Picture quality Original picture quality Can change§1
Transferring
(Dubbing)
Are chapters/thumbnails Yes §2 No (One title is recorded as one chapter. Thumbnails return to
maintained? the default position.)
Other operations while You can record/play using the HDD. No
transferring (dubbing)
§1If you select a recording mode with better picture quality than the original, the picture quality does not improve. (However, it does prevent
against degradation of picture quality.)
§2[+R] Up to approx. 100 chapters
When transferring (dubbing) playlists to DVD-R, DVD-RW (DVD-Video format) or +R, the thumbnails may not reflect changes made to them.
∫ Approximate transferring (dubbing) times (Max. speed)
(excludes time required to write data management information)
HDD 5k high speed 8k high speed 4k high speed 8k high speed
recording compatible recording compatible recording compatible recording compatible
Recording mode Recording time DVD-RAM DVD-R DVD-RW +R
XP Approx. 12 min. Approx. 8.7 min. Approx. 15 min. Approx. 8.7 min.
SP 1 Approx. 6 min. Approx. 3.8 min. Approx. 7.5 min. Approx. 3.8 min.
LP 1 hour Approx. 3 min. Approx. 1.9 min. Approx. 3.8 min. Approx. 1.9 min.
EP (6H) Approx. 2 min. Approx. 1.3 min. Approx. 2.5 min. Approx. 1.3 min.
EP (8H) Approx. 1.5 min. Approx. 56 sec. Approx. 1.9 min. Approx. 56 sec.
[Note]
≥When recording or playing while transferring (dubbing), the unit may not use the maximum recording speed.
≥Depending on the condition of the disc, the unit may not transfer (dub) using the maximum speed.
Regarding high speed transfer (dubbing) to DVD-R, etc. Regarding transferring (dubbing) of digital broadcasts that
To high speed transfer (dub) titles (or playlists created from those allow “One time only recording”
titles), set “Rec. for High-Speed Dubbing” to “On” before recording to You can transfer (dub) a recorded title to a CPRM (➡ 68) compatible
the HDD (➡ 22). DVD-RAM; however, the title is erased from the HDD.
However, in the following cases, transferring (dubbing) to DVD-R, ≥Titles or playlists cannot be transferred (dubbed) from DVD-RAM to
DVD-RW (DVD-Video format) and +R using the high speed mode the HDD.
does not work. ≥You cannot use one touch transfer (dubbing). Use the transferring
≥Playlists created from titles using a variety of recording modes (dubbing) list (➡ 44).
≥Playlists created from multiple titles using FR recording mode ≥Titles will not be transferred (dubbed) if they are protected (➡ 39).
≥Playlists mixed with a variety of audio types (Dolby Digital and ≥You cannot transfer (dub) playlists created from “One time only
LPCM, etc.) recording” titles.
≥Titles that contain many erased segments. ≥Titles with recording limitations and playlists cannot be registered RQT8023
on the same transferring (dubbing) list.
43
EH50English.book Page 44 Tuesday, February 1, 2005 6:36 PM
HDD DVD SD
AUDIO
Numbered
1 2 3
F Rec
Transferring (dubbing) using the
buttons 4 5 6
SETUP
transferring (dubbing) list
7 8 9 [HDD] ,-. [RAM]
CANCEL VCR Plus+ CM SKIP
0 [-RW‹VR›] > [HDD]
SKIP SLOW/SEARCH [HDD] > [-R] [-RW‹V›] [+R]
:, 9
You can order titles and playlists as desired for transfer (dubbing) to disc.
STOP PAUSE PLAY/x1.3 ≥Select the audio type for recording MTS broadcasts from “Select
∫ 1
MTS” (➡ 56) when:
; TV G U I D E –Transferring (dubbing) to a DVD-R, DVD-RW (DVD-Video format)
NU FU FUNCTIONS
ME
T OR
and +R.
NC
NAV IREC
TOP
T
IGA
TIO
D
3,4,2,1
TIM
PAGE
STATUS
2 Press [3, 4] to select “DUBBING”
“Green” and press [ENTER].
DUBBING
Preparation
≥Insert a disc that you can use for recording (➡ 8). Cancel All
Source HDD
1 Dubbing Direction
≥Confirm that there is enoughDVD/TV
remaining disc space. HDD > DVD
Destination DVD
2 Mode
Video High Speed
[HDD] > [RAM] [-R] [-RW‹V›] [+R] ≥If you are not going to change the registered list press [4]
With one touch transfer (dubbing), the title currently being played is several times (➡ 45, step 6).
dubbed without any further setting.
≥[-R] [-RW‹V›] [+R] Select the audio type for recording MTS broadcast
3 Set the transfer (dubbing) direction.
from “Select MTS” (➡ 56). ≥If you are not going to change the dubbing direction, press
[4] (➡ step 4).
1 Play the title or playlist you want to 1 Press [3, 4] to select “Dubbing Direction” and press
[1].
transfer (dub). 2 Press [3, 4] to select “Source” and press [ENTER].
2 Press [DUBBING]. 3 Press [3, 4] to select the drive and press [ENTER].
4 Press [3, 4] to select “Destination” and press [ENTER].
DUBBING 5 Press [3, 4] to select the drive and press [ENTER].
The same drive as the transfer (dubbing) source cannot be
Dub in High Speed mode.
Do you want to continue? selected.
6 Press [2] to confirm.
Transferring
(Dubbing)
Yes No
3 Create List
is exceeded using one of the recording modes indicated below.
[HDD] > [RAM]: High speed mode Start Dubbing
Page 01/01
Create a dubbing list.
Rec. for High-Speed Dubbing setting 2 Press [3, 4] to select “New Entry” and press [ENTER].
On Off 3 Press the “Blue” button to select “Video” or press the
“Green” button to select “Playlists”.
High speed mode Same recording mode used as when
recording the source title (XP–EP, FR). Create List
Video Playlists
HDD
≥Playlists are transferred (dubbed) in FR 007 008 0:30(SP) ---
mode.
10 10/10 Fri 8 11/10 Sat
Transferring
(Dubbing)
point. However, in high speed mode, only titles that have 1 Press [SUB MENU]. Add
completed transferring (dubbing) at the point stopped are 2 Press [3, 4] to select the operation and press Erase
transferred (dubbed). [Even if the title was not transferred [ENTER]. Move
(dubbed) to the DVD-R, DVD-RW (DVD-Video format) or +R, Erase All:
the amount of remaining writable disc space becomes less.] Erase all items registered on the transferring (dubbing) list.
Press [2, 1] to select “Yes” and press [ENTER].
∫ To return to the previous screen Add:
Press [RETURN]. Add new items to the transferring (dubbing) list.
Press [3, 4, 2, 1] to select the playlists or titles to be added and
press [ENTER].
∫ Recording and playing while transferring
Erase:
(dubbing) Erase the selected items.
You can record and play using the HDD while high speed Press [2, 1] to select “Yes” and press [ENTER].
transferring (dubbing). You can also erase multiple items (➡ above, Multiple editing).
Press [ENTER] to cancel the screen display. Move:
≥To confirm the current progress Move selected items or change the order of items on the transferring
Press [STATUS]. (dubbing) list.
[Note] Press [3, 4] to select the destination and press [ENTER].
≥You cannot perform chasing play or edit, etc. while transferring
(dubbing). To cancel all registered transferring (dubbing) setting and lists
≥Scheduled recordings executed while transferring (dubbing) are After performing steps 1–2 (➡ 44, right column)
recorded to the HDD regardless of the recording drive settings. 1 Press [3, 4] to select “Cancel All” and press [ENTER].
≥You cannot play a playlist while transferring (dubbing) titles with 2 Press [2, 1] to select “Yes” and press [ENTER].
“One time only recording” restriction (➡ 43). ≥The settings and lists may be cancelled in the following situations.
–When a title, still picture, etc. has been recorded or erased at the
transfer (dubbing) source
To play DVD-R, DVD-RW (DVD-Video format) and +R on other
–When steps have been taken, for instance, to turn off the unit,
players, it is necessary to finalize them after transfer (dubbing).
open the tray, change the transfer (dubbing) direction, etc.
RQT8023
45
EH50English.book Page 46 Tuesday, February 1, 2005 6:36 PM
While playing a disc, the content being played is transferred Chapter 3 Chapter 4
While playing in order, all the titles after the selected title are
≥Operations and on screen displays during transfer recorded until the set time. (After the last title on the disc has
(dubbing) are also recorded. finished playing the top menu is recorded until the set time is
≥Almost all DVD-Video on sale have been treated to prevent reached.)
illegal copying, and cannot be transferred (dubbed).
≥The following cannot be transferred (dubbed): DVD-Audio, To return to the previous screen
Video CD, Audio CD and so on. Press [RETURN].
Cancel All
(Dubbing)
1 Dubbing Direction
DVD > HDD
2 Hour 00 Min.
2 Mode
DVD-Video XP
Set a few minutes longer
3 Time Limit
RQT8023
46
EH50English.book Page 47 Tuesday, February 1, 2005 6:36 PM
Preparation
DVD POWER TV
≥Press [HDD] or [DVD] to select the recording drive.
POWER
Í
CH VOLUME
INPUT SELECT TV/VIDEO
INPUT SELECT [Note]
When recording using this unit’s input terminals, only the sound
HDD, DVD HDD DVD SD
AUDIO
received at the time of recording will be recorded.
1 2 3 As long as the secondary audio that is recorded on the video
F Rec
cassette is not output on the unit in play, it is not recorded.
4 5 6
SETUP
7 8 9
CANCEL
0
VCR Plus+ CM SKIP
1 While stopped
SKIP SLOW/SEARCH
Press [INPUT SELECT] to select the
; input channel for the equipment you
∫
STOP PAUSE PLAY/x1.3
have connected.
NU
TV G U I D E
FU 2 Press [REC MODE] to select the
ME
T OR
NC
NAV IREC
TOP
T
IGA
TIO
recording mode.
D
NS
ENTER
SCHEDULE
E SLIP
¥ REC
REC REC MODE ERASE DISPLAY
PAGE
Press [¥ REC].
Recording starts.
REC MODE
DRIVE
DRI VE REC
POWER OPEN/CLOSE
SELECT
/x1.3
CH
Transferring
(Dubbing)
S VIDEO VIDEO L/MONO - AUDIO - R
RQT8023
47
EH50English.book Page 48 Tuesday, February 1, 2005 6:36 PM
; ENTER
S SUB MENU
STOP PAUSE PLAY/x1.3
∫ To register individual still pictures
TV G U I D E 1 Press [3, 4] to select “Create List” and press [1].
NU FU FUNCTIONS 2 Press [3, 4] to select “New Entry” and press [ENTER].
ME
T OR
NC
NAV IREC
TOP
T
IGA
TIO
NS
ENTER
[ENTER].
SCHEDULE
E SLIP
Transferring (dubbing)
DVD/TV
using the ∫ To register on a folder by folder basis
transferring (dubbing) list 1 Press [3, 4] to select “Create List” and press [1].
2 Press [3, 4] to select “Picture/Folder” and press
≥You cannot transfer (dub) still pictures recorded on CD. [ENTER].
DUBBING
1 Dubbing Direction
Current Capacity: 4343MB
Picture/Folder Picture
2 Press [3, 4] to select “DUBBING” 3 Press [3, 4] to select “Folder” and press [ENTER].
4 Press [3, 4] to select “New Entry” and press [ENTER].
and press [ENTER]. 5 Press [3, 4] to select the folder and press [ENTER].
DUBBING
≥To select a multiple number of items together, press
Cancel All
[;] to add the check mark and press [ENTER] (➡ 49,
1 Dubbing Direction
Source SD card
Multiple editing).
SD card > HDD
≥To show other pages (➡ 49)
Transferring
Destination HDD
2 Mode
(Dubbing)
≥If you are not going to change the registered list press [4] You can register a multiple number of folders on the
several times (➡ step 6). transferring (dubbing) list by repeating steps 4–5.
3 Set the transfer (dubbing) direction. 6 Press [2] to confirm.
≥If you are not going to change the dubbing direction, press 6 Press [3, 4] to select “Start
[4] (➡ step 4).
1 Press [3, 4] to select “Dubbing Direction” and press
Dubbing” and press [ENTER].
≥For individual still pictures only
[1]. When specifying another folder as the transferring (dubbing)
2 Press [3, 4] to select “Source” and press [ENTER]. destination, select “Folder”.
3 Press [3, 4] to select the drive and press [ENTER].
4 Press [3, 4] to select “Destination” and press [ENTER]. Folder New folder
001 100__DVD
5 Press [3, 4] to select the drive and press [ENTER]. 002 101__DVD
003 102__DVD
- New folder
The same drive as the transfer (dubbing) source can be Make a new folder and dub to it? ---
selected.
6 Press [2] to confirm. 7 Press [2, 1] to select “Yes” and
4 Set the recording mode. press [ENTER] to start transferring
≥If you are not going to change the recording mode, press [4] (dubbing).
(➡ step 5).
1 Press [3, 4] to select “Mode” and press [1]. To stop transferring (dubbing)
2 Press [3, 4] to select “Format” and press [ENTER]. Press and hold [RETURN] for 3 seconds.
3 Press [3, 4] to select “Picture” and press [ENTER].
“Recording Mode” is automatically set to “High Speed”. To return to the previous screen
4 Press [2] to confirm. Press [RETURN].
RQT8023
48
EH50English.book Page 49 Tuesday, February 1, 2005 6:36 PM
Select the item in step 5–3 (for a still picture) or 5–5 Press [FUNCTIONS].
Erase All
(for a folder) (➡ 48, right column)
1 Press [SUB MENU]. Add
2 Press [3, 4] to select “Other
2 Press [3, 4] to select the operation and press Erase Functions” and press [ENTER].
[ENTER].
Erase All: 3 Press [3, 4] to select “COPY ALL
Erase all items registered on the transferring (dubbing) list.
Press [2, 1] to select “Yes” and press [ENTER].
PICTURES” and press [ENTER].
Add: Copy All Pictures (JPEG)
Add new items to the transferring (dubbing) list. Copy from SD card
Copy to HDD
and press [ENTER]. \JPEG\DCIM001
Erase the selected items. ≥If there is a multiple number of higher folders recognizable,
Press [2, 1] to select “Yes” and press [ENTER]. you can switch them using [2, 1].
You can also erase multiple items (➡ above, Multiple editing).
4 Press [3, 4] to select “Copy to” and
To cancel all registered transferring (dubbing) settings and lists press [2, 1] to select the drive.
After performing steps 1–2 (➡ 48, left column)
1 Press [3, 4] to select “Cancel All” and press [ENTER]. 5 Press [3, 4, 2, 1] to select “Copy”
2 Press [2, 1] to select “Yes” and press [ENTER]. and press [ENTER].
≥The settings and lists may be cancelled in the following situations.
–When a title or still picture has been recorded or erased at the
transfer (dubbing) source To stop transferring (dubbing)
–When steps have been taken, for instance, to turn off the unit, Press and hold [RETURN] for 3 seconds.
remove the card, open the tray, change the transfer (dubbing) To return to the previous screen
direction, etc. Press [RETURN].
∫ To select another folder
(➡ 9, Structure of folders displayed by this unit)
Transferring
1 Press [3, 4, 2, 1] to select “Folder” and press [ENTER].
(Dubbing)
If you want to switch to another higher folder (➡ below)
2 Press [3, 4] to select the folder and press [ENTER].
Create List Select pictures
SD CARD
001
\DCIM\100__DVD
100__DVD
[Note]
Folder 103__DVD
0001 0002 0003 0004
002
003
004
101__DVD
102__DVD
103__DVD
≥When transferring (dubbing) the still pictures on a folder by
---
folder basis (➡ 48) or card by card basis (➡ above, COPY ALL
You can also select folders with the numbered buttons. PICTURES), files other than the still picture files inside the
e.g., 5: [0] ➡ [0] ➡ [5] folder will also be transferred (dubbed). (This does not apply to
15: [0] ➡ [1] ➡ [5] the lower folders contained inside the folders.)
115: [1] ➡ [1] ➡ [5] ≥If still pictures are already contained inside the transfer
≥The still pictures of different folders cannot be registered on the (dubbing) destination folder, the new still pictures are recorded
same list. following the existing still pictures.
≥If the space on the destination drive runs out or the number of
To switch to another higher folder files/folders to be transferred (dubbed) exceeds the maximum
≥Only when selecting the source folder (➡ 35), transferring (dubbing) will stop partway through.
If there is a multiple number of higher folders recognizable,
≥When a name has not been input for the transfer (dubbing)
While the screen on the right appears
source folder, it is possible that this folder’s name will not be the
1 Press [SUB MENU]. 001
\DCIM\100__DVD
100__DVD
002 101__DVD same on the transfer (dubbing) destination. It is recommended
2 Press [3, 4] to select “Select 003 102__DVD
004
---
103__DVD
that you input a folder name before transferring (dubbing)
Folder” and press [ENTER].
(➡ 42).
3 Press [2, 1] to select the
Select Folder ≥Print number setting (DPOF) is not transferred (dubbed).
higher folder and press
Select folder to access. ≥The sequence in which the still pictures are registered on the
[ENTER].
\DCIM transfer (dubbing) list may not be the same at the transfer
4 Press [3, 4] to select the
Press ENTER to confirm. (dubbing) destination.
desired folder and press
[ENTER].
RQT8023
49
EH50English.book Page 50 Tuesday, February 1, 2005 6:36 PM
Í
INPUT SELECT TV/VIDEO CH VOLUME
Setting the protection
HDD, DVD, SD [RAM]
HDD DVD SD
AUDIO
1 2 3 Preparation
F Rec
≥Press [DVD] to select the DVD drive.
4 5 6
SETUP
7 8 9 After performing steps 1–3 (➡ left)
CANCEL VCR Plus+ CM SKIP
0
SKIP SLOW/SEARCH 4 Press [3, 4] to select “Disc
Protection” and press [ENTER].
STOP PAUSE PLAY/x1.3
T OR
FUNCTIONS
NC
NAV IREC
TOP
T
IGA
TIO
D
DISC
NS
DVD-RAM
E SLIP
TIM
3,4,2,1
SUB MENU RETURN ENTER Disc Name
S CH
CREATE
RETURN Disc Protection On
DUBBING CHAPTER Info STATUS
PAGE Erase All Titles
REC REC MODE ERASE DISPLAY
PAGE Format Disc
≥You can use SD Memory Cards with capacities from 8 MB to 1 GB The lock symbol appears closed when the disc is write-
(➡ 9). protected.
DVD/TV
LOCK
1 3 VCR Plus+
Dubbing DUBBING
MANAGEMENT” or “CARD
functions
≥When HDD has been selected,“Format” and “Erase All ≥The disc name is displayed in the FUNCTIONS window.
Titles” are displayed. ≥With a finalized DVD-R, DVD-RW (DVD-Video format) and +R, the
≥When SD has been selected, “Format” only is displayed. name is displayed on the Top Menu.
FUNCTIONS DVD Documentary
Cartridge Protecti My favorite 01/02
DVD-RAM Disc Protection Of
01 02
Chapter 1 Chapter 2
Playback DIRECT NAVIGATOR PLAYLISTS
03 04
Erasing all titles and playlists—Erase Erasing all the contents of a disc or
All Titles card—Format
[HDD] [RAM] [HDD] [RAM] [-RW‹V›] [-RW‹VR›] [SD]
Preparation Preparation
≥Press [HDD] or [DVD] to select the drive. ≥Press [HDD], [DVD] or [SD] to select the drive.
≥Release protection (➡ 50). ≥Release protection (➡ 50).
RQT8023
51
EH50English.book Page 52 Tuesday, February 1, 2005 6:36 PM
∫ Finalize
Convenient
functions
Make selections from “Top Menu Style” and “Playback will start with:”
above before finalizing the disc.
11 Press [ENTER].
[Note]
When finalizing a high-speed recording compatible disc, it may take
longer than displayed on the confirmation screen (approximately four
RQT8023 times).
52
EH50English.book Page 53 Tuesday, February 1, 2005 6:36 PM
Entering text
HDD DVD SD
1 2 3
AUDIO
2 Press [3, 4, 2, 1] to select a
F Rec
Numbered 4 5 6 character and press [ENTER].
SETUP
buttons Repeat this step to enter other characters.
7 8 9
CANCEL VCR Plus+ CM SKIP
¢ CANCEL 0 ≥To erase a character
SKIP SLOW/SEARCH Press [3, 4, 2, 1] to select the character in the name field
:,9 and press [;]. (The selected characters are erased.)
STOP PLAY/x1.3 ≥Using the numbered buttons to enter characters
∫ PAUSE
;
e.g., entering the letter “R” 5 J K L
TV G U I D E 1 Press [7] to move to the
NU FU 7 7
7th row. 6 M N O
ME
T OR
NC
NAV IREC
TOP
T
IGA
TIO
7
D
3 Press [ENTER].
TIM
3,4,2,1 8 T U V
SUB MENU RETURN ENTER ≥To enter a space
S CH
SUB MENU CREATE
RETURN Press [¢ CANCEL] and press [ENTER].
DUBBING CHAPTER Info STATUS ≥Save/recall phrases (➡ below)
REC REC MODE ERASE DISPLAY
[HDD] [RAM] [-R] [-RW‹V›] [+R] [SD]
You can give names to recorded titles, etc.
3 Press [∫] (Set).
The maximum number of characters: “Now writing.” appears then the screen returns to the Title
[HDD] [RAM] Characters view screen and so on.
DVD/TV
Title 64
To end partway
Playlist 64 Press [RETURN].
Folder of still pictures 36 Text is not saved.
Disc ([RAM]) 64
∫ To save phrases
You can save frequently used phrases and recall them later.
[-R] [-RW‹V›] [+R] Characters
Maximum number of saved phrases: 20
Title 44 Maximum number of characters per phrase: 20
Disc 40 After entering the phrase (step1–2)
1 Press [3, 4, 2, 1] to select “Phrase Save” and press
[ENTER].
[SD] Characters ≥You can also press [9] to select “Phrase Save”.
Folder of still pictures 36 2 Press [2, 1] to select “Save” and press [ENTER].
≥Press [RETURN] to cancel.
[Note] ∫ To recall a saved phrase
If a name is long, parts of it may not be shown in some screens. 1 Press [3, 4, 2, 1] to select “Phrase List” and press
[ENTER].
≥You can also press [:] to select “Phrase List”.
2 Press [3, 4, 2, 1] to select the phrase to be recalled and
1 Show Enter Name screen. press [ENTER].
∫ To erase saved phrases
1 Press [3, 4, 2, 1] to select “Phrase List” and press
Title [ENTER].
Select “Title Name” in step 5 on page 38. ≥You can also press [:] to select “Phrase List”.
Convenient
functions
Playlist 2 Press [3, 4, 2, 1] to select the phrase to be erased.
Select “Playlist Name” in step 5 on page 41. 3 Press [SUB MENU] to show “Erase Phrase” and press
[ENTER].
Disc
4 Press [2, 1] to select “Erase” and press [ENTER].
Select “Disc Name” in step 4 of “Providing a
5 Press [RETURN].
name for a disc” on page 50.
Folder of still pictures
For your reference
Select “Folder Name” in step 3 on page 42, “To
If you enter a long name, only part of it is shown in the TOP MENU
edit still picture folders”.
after finalization (➡ 52). When entering a title name, the name that
will appear in the TOP MENU can be previewed in “Top Menu
Name field: shows the text you have entered Preview (Finalized Disc)” window.
; Erase 5 J K L j k l O N @
Phrase Save 6 M N O m n o [ ] _
Phrase List 7 P Q R S p q r s ( )
8 T U V t u v { } -
9 W X Y Z w x y z \ |
π Set
0 . , ? ! " ' : ; ` ^
Space
ENTER
RQT8023
53
EH50English.book Page 54 Tuesday, February 1, 2005 6:36 PM
Common procedures
1
DVD POWER TV
POWER
Í DVD POWER While stopped
Í
INPUT SELECT TV/VIDEO CH VOLUME
Press [SETUP].
Tabs Menus Options
HDD DVD SD
AUDIO
1 2 3
F Rec
SETUP
TV Guide Settings
Numbered 4 5 6
buttons SETUP Signal Source (RF IN) CableTV
7 8 9 SETUP Channel Set Channels Automatically
CANCEL VCR Plus+ CM SKIP
¢ CANCEL 0
Setup
SKIP SLOW/SEARCH 2 Press [3, 4] to select the tab and
press [1].
STOP PAUSE PLAY/x1.3
3 Press [3, 4] to select the menu and
TV G U I D E
NU FU press [ENTER].
ME
T OR
NC
NAV IREC
TOP
4
IGA
TIO
NS
ENTER
SCHEDULE
E SLIP
press [ENTER].
TIM
3,4,2,1
SUB MENU RETURN ENTER
S CH
RETURN To return to the previous screen
CREATE
DUBBING CHAPTER Info STATUS Press [RETURN].
PAGE
REC REC MODE ERASE DISPLAY To exit the screen
PAGE
Press [SETUP].
[Note]
There may be differences in operation methods. If this happens,
DVD/TV follow the on-screen instructions for the operation.
Summary of settings
The settings remain intact even if you switch the unit to standby.
RQT8023
54
EH50English.book Page 55 Tuesday, February 1, 2005 6:36 PM
Play DVD-Audio in Video Mode ≥Video Mode (Video On):The setting returns to “Audio Mode
Select “Video Mode (Video On)” to play DVD-Video (Video Off)” when you change the
content on some DVD-Audio. disc or turn the unit off.
≥Audio Mode (Video Off)
Audio Choose the language for audio, subtitle ≥English ≥French ≥Spanish
Language and disc menus. [DVD-V] ≥Original: The original language of each disc will be selected.
≥Some discs start in a certain ≥Other ¢¢¢¢
language despite any changes you
Subtitle ≥Automatic:
Language make here. If the language selected for “Audio Language” is not available,
≥Enter a code (➡ 69) with the subtitles of that language will automatically appear if available
numbered buttons when you select on that disc.
“Other ¢¢¢¢”. ≥English ≥French ≥Spanish ≥Other ¢¢¢¢
When the selected language is not
Menu available on the disc, the default ≥English ≥French ≥Spanish ≥Other ¢¢¢¢
Language language is played. There are discs
where you can only switch the
language from the menu screen
(➡ 31).
Settings for Recording
Press [ENTER] to show the following settings.
Recording Time in EP Mode ≥EP-Extended Play (6H):You can record for 6 hours on an
Select the maximum number of hours for recording in unused 4.7 GB disc.
EP mode (➡ 21, Recording modes and approximate ≥EP-Extended Play (8H):You can record for 8 hours on an
recording times). unused 4.7 GB disc.
The sound quality is better when using “EP-Extended Play (6H)”
than when using “EP-Extended Play (8H)”.
Rec. for High-Speed Dubbing ≥On: Makes high speed mode transferring (dubbing) to
When high speed transferring (dubbing) a title to DVD- DVD-R, etc. possible. Press [2, 1] to select “Yes”
R, DVD-RW (DVD-Video format) and +R, it is
and press [ENTER]. [“ ” appears in the
necessary to turn this setting “On” before recording to
transferring (dubbing) list (➡ 45).]
HDD; however, the screen size, etc. is restricted
–Pictures are saved in 4:3.
(➡ right). We recommend turning the setting “Off” if
–Select the type of audio in advance from “Select
high speed transfer (dubbing) to DVD-R, etc. is not
MTS” (➡ 56).
necessary when recording a program.
≥Off
RQT8023
55
EH50English.book Page 56 Tuesday, February 1, 2005 6:36 PM
Audio Dynamic Range Compression [DVD-V] (Dolby Digital only) ≥On ≥Off
Change the dynamic range for late night viewing.
Select MTS ≥Main ≥Secondary Audio Program (SAP)
Select the audio recording type, main or secondary (SAP) audio You cannot select the audio on this unit when recording from an
when: external source, such as when transferring (dubbing) from a
–Recording or transferring (dubbing) to a DVD-R, DVD-RW video cassette recorder. Select on the other equipment.
(DVD-Video format) and +R.
–When “Rec. for High-Speed Dubbing” is set to “On” (➡ 22).
–Recording or transferring (dubbing) sound in LPCM.
(➡ below, Audio for XP Recording).
Digital Audio Output
Change the settings when you have connected equipment through this unit’s DIGITAL AUDIO OUT terminal (➡ 15).
(Output is not digital with DVD-Audio.)
≥Press [ENTER] to show the following settings.
PCM Down Conversion ≥On: Signals are converted to 48 kHz. (Choose when the
Select how to output audio with a sampling frequency of 96 connected equipment cannot process signals with
kHz. sampling frequency of 96 kHz.)
≥Signals are converted to 48 kHz despite the settings ≥Off: Signals are output as 96 kHz. (Choose when the
across if the signals have a sampling frequency of 96 kHz connected equipment can process signals with
with a disc that has copy protection. sampling frequency of 96 kHz.)
Dolby Digital Select how to output the signal, to output ≥Bitstream: When connecting to equipment displaying the
“Bitstream” so the connected equipment Dolby Digital logo.
decodes the signal, or to decode on this ≥PCM: When connecting to equipment not displaying the
unit and output the signal as “PCM” (2 Dolby Digital logo.
DTS channel). ≥Bitstream: When connecting to equipment displaying the DTS
[Note] logo.
Not making the proper settings may result ≥PCM: When connecting to equipment not displaying the
in noise, possibly damaging your hearing DTS logo.
and speakers, and digital recording may
not work properly.
Audio for XP Recording ≥Dolby Digital (➡ 68)
Choose the audio type when recording or transferring (dubbing) ≥LPCM (➡ 68)
with XP mode. –The picture quality of LPCM recordings may be lower than
that of normal XP mode recordings.
–The audio recording becomes Dolby Digital even if you
selected LPCM when using a recording mode other than XP.
–When recording a MTS broadcast, select the type of audio in
advance from “Select MTS” (➡ above).
RQT8023
56
EH50English.book Page 57 Tuesday, February 1, 2005 6:36 PM
Preparation:
If the television program list has already been downloaded, return the unit to the factory preset condition using the steps indicated below.
[Note]
You can set scheduled recording only manually after you set the unit with “Set Channels Automatically”.
Auto Channel Setting starts. This takes a few minutes. SPECIAL CATV CHANNEL 1
The unit then proceeds with Auto Clock Setting. The time is
displayed when finished.
Adjust Time Zone
SETUP Set Clock Automatically
Adjust the time zone (j1 or i1) if it was not set correctly with auto
clock setting.
Auto Clock Setting is complete.
Channel You cannot change this setting if you set the clock manually.
Setup
Disc 4/4/2005 12:15 AM
DST.............. On
Time Zone..... CST
1 Press [SETUP].
Video
Audio 2 Press [3, 4] to select “Setup” and
≥DST, Daylight Saving Time, shows the summertime setting. press [1].
≥TIME ZONE shows the time difference from Greenwich
Mean Time (GMT).
EST (Eastern Standard Time) l GMT j5
3 Press [3, 4] to select “Clock
CST (Central Standard Time) l GMT j6 Settings” and press [ENTER]. Convenient
MST (Mountain Standard Time) l GMT j7
4
functions
PST (Pacific Standard Time) l GMT j8
Press [3, 4] to select “Adjust Time
AST (Alaska Standard Time) l GMT j9 Zone” and press [ENTER].
HST (Hawaii Standard Time) l GMT j10
For other areas: xx hr SETUP Adjust Time Zone
≥If the Auto Clock Setting does not start automatically, select
j1
“Clock Settings” from the “Setup” tab and then select “Set
Channel 0
Clock Automatically”. Setup i1
≥If the time was not set correctly, use manual clock setting Disc
(➡ 17) or adjust time zone. Video
57
EH50English.book Page 58 Tuesday, February 1, 2005 6:36 PM
Channel captions
You can use the preset captions, or manually enter new ones yourself.
The captions you enter are displayed when the channel is displayed and in the Direct Navigator screen.
≥You can set channel captions only after “Set Channels Automatically” is completed (➡ 57).
1 Press [SETUP].
SETUP
TV Guide Settings
10
Video
Audio
5 Press [3, 4] to select the channel Display
TV Screen
12
23
----
----
press [2].
≥Channels are only displayed if they contain a station and if
captions have not been added manually.
6 Press [2, 1] to return to the “Channel
≥To delete the channel number, press [¢ CANCEL]. Number” column.
Repeat steps 4 and 5 to enter other channels. Repeat steps 4–6 to enter other channels.
6 Press [ENTER].
7 Press [ENTER].
RQT8023
58
EH50English.book Page 59 Tuesday, February 1, 2005 6:36 PM
Messages
HARD ERR ≥If there is no change after turning the unit on and off, consult the dealer where the unit was —
purchased.
HDD SLP ≥In order to extend HDD life, the HDD is in SLEEP mode. Press [HDD] to activate. 4
NO READ ≥The disc is dirty or badly scratched. The unit cannot record, play, or edit. 5
≥You have used a DVD-RAM lens cleaner and it has finished. Press [< OPEN/CLOSE] on 5
the main unit to eject the disc.
PLEASE WAIT ≥Displayed when the unit is started. This is not a malfunction. —
≥The unit is carrying out its recovery process. You cannot operate the unit while “PLEASE —
WAIT” is displayed.
SELF CHECK ≥There was a power failure or the AC plug was disconnected while the unit was on. The unit —
is carrying out its recovery process. Wait until the message disappears.
UNFORMAT ≥You inserted an unformatted DVD-RAM or a DVD-RW that is unformatted or recorded on —
other equipment.
UNSUPPORT ≥You have inserted a disc the unit cannot play or record on. 8, 9
U59 ≥The unit is hot. —
The unit switches to standby for safety reasons. Wait for about 30 minutes until the
Reference
message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan
on the rear of the unit.
U99 ≥The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch the unit to —
standby. Now press [POWER Í/I] on the main unit again to turn the unit on.
H or F ≥There is something unusual. (The service number displayed after H and F depends on the —
unit’s condition.)
≥Check the unit using the troubleshooting guide. If the service number does not disappear, 62–66
do the following.
1. Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it.
2. Press [POWER Í/I] to turn the power on. (The unit may be fixed.)
If the service number does not disappear despite doing the above, request service from
the dealer. Inform the dealer of the service number when requesting service.
R: ≥The unit is showing you the remaining time on the HDD or the disc. (This does not indicate 20
(e.g., R44:00) a malfunction.)
In the display across the letter “R” means “Remain” and the numbers mean remaining time
(hours:minutes). RQT8023
59
EH50English.book Page 60 Tuesday, February 1, 2005 6:36 PM
Refer to the following items if you have any doubts about unit operations.
Set up Page
What equipment is necessary to play ≥ DVD-Video: 15
multi channel surround sound? You can play DVD-Video multi channel surround by digitally connecting an amplifier
equipped with a Dolby Digital and a DTS decoder.
≥DVD-Audio: —
Output is not digital with DVD-Audio.
Are the headphones and speakers ≥You cannot directly connect them to the unit. Connect through the amplifier, etc. 15
directly connected to the unit?
Is my television progressive output ≥All Panasonic televisions that have 480p input terminals are compatible. Consult the —
compatible? manufacturer if you have another brand of television.
The television has both S-VIDEO IN ≥We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the 14
terminal and COMPONENT VIDEO color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve
IN terminals. Which should I connect high fidelity in reproducing colors.
with? If the television is compatible with progressive output, a high quality picture can be
output because this unit’s component video output terminal outputs a progressive
output signal.
Disc
Can I play DVD-Video, DVD-Audio ≥You can play them if the video standard is NTSC. —
and Video CDs bought in another ≥However, you cannot play DVD-Video if their region number does not include “1” or Cover
country? “ALL”. Refer to the disc’s jacket for more information.
Can a DVD-Video that does not have ≥The DVD-Video region number indicates the disc conforms to a standard. You cannot —
a region number be played? play discs that do not have a region number. You also cannot play discs that do not
conform to a standard.
Please tell me about DVD-R, DVD- ≥This unit records and plays DVD-R, DVD-RW (DVD-Video format) and +R, and plays 8, 9
RW, +R and +RW compatibility with DVD-RW (DVD Video Recording format) and +RW.
this unit. ≥This unit also records and plays high speed recording compatible DVD-R, DVD-RW, +R —
discs.
Please tell me about CD-R and CD- ≥This unit plays CD-R/CD-RW discs which have been recorded in one of the following 9, 33,
RW compatibility with this unit. standards: CD-DA, Video CD, MP3 and still pictures (JPEG/TIFF). Close the session or 35
finalize the disc after recording. This unit can recognize up to 99 folders (groups) and
999 files (tracks) on a disc with MP3 or still pictures (JPEG/TIFF).
≥You cannot write to a CD-R or CD-RW with this unit. —
Recording
Can I record from a commercially ≥Most commercially sold video cassettes and DVD are copy protected; therefore, —
purchased video cassette or DVD? recording is usually not possible.
Can DVD-R, DVD-RW (DVD-Video ≥You can play on compatible equipment such as DVD players after finalizing the disc on —
format) and +R recorded on this unit this unit. However, depending on the condition of the recording, the quality of the disc
be played on other equipment? and capabilities of the DVD player, play may not be possible.
Can I record digital audio signals ≥You cannot record digital signals. The digital audio terminals on this unit are for output —
using this unit? only.
Can a digital audio signal from this ≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio 56
unit be recorded to other Output” settings to the following from the SETUP menu.
equipment? –PCM Down Conversion On
–Dolby Digital PCM
–DTS PCM
Reference
However, only
–As long as digital recording from the disc is permitted.
–As long as the recording equipment is compatible with a sampling frequency of 48
kHz.
≥You cannot record MP3 signals. —
≥Output is not digital with DVD-Audio. —
Can I switch to SAP during ≥With HDD and DVD-RAM, you can, and the audio recorded also changes. Just press 22
recording? [AUDIO].
≥With DVD-R, DVD-RW (DVD-Video format), +R you cannot. Change before recording 56
with “Select MTS” in the SETUP menu.
Can I high speed transfer (dub) to a ≥When using a high speed recording compatible disc, you can transfer (dub) a one hour 43
disc? program to:
–DVD-R or +R in approximately 56 seconds§
–DVD-RAM in approximately 1.5 minutes§
–DVD-RW (DVD-Video format) in approximately 1.9 minutes§
RQT8023 § Quickest possible time.
60
EH50English.book Page 61 Tuesday, February 1, 2005 6:36 PM
I have relocated, changed my ≥Select “Change system settings” in “SETUP” in the Navigation menu of the TV Guide 29, 54
television reception system or cable On ScreenTM system. If you select “No, repeat setup process”, you can then access the
TV box etc. How should I redo the TV Guide On ScreenTM system setup screen. You can also access the setup screen
TV Guide On ScreenTM system from “TV Guide Settings” in the SETUP menu.
setup?
Please tell me about the ≥Channel line-up data is transmitted continuously, 24 hours a day–7 days a week. —
downloading of television program ≥Program information that contains details about each program is usually transmitted —
list data. four times a day, and the cycles last approximately 3 hours. The TV Guide On ScreenTM
system only requires one transmission a day to maintain up-to-date program listings.
Because the unit must be turned off in order to receive new information, multiple
transmissions are conveniently scheduled early to mid-morning and during the early
afternoon hours.
Why doesn’t my favorite program ≥The hardware that makes TV Guide On ScreenTM system possible is a computer chip 29
have more information in the which has limited storage space. Factors used in determining which programs display
information window or expanded detailed program information are the number of channels turned “ON” in the CHANNEL
information window? EDITOR screen and the availability of the descriptions.
Setting channels that cannot be received to “OFF” in the CHANNEL EDITOR screen
may increase the amount of information displayed.
What kind of information might be ≥Useful Product Related Information (PRI) such as alerting the user to new features or —
seen in the MESSAGES screen? data available through the TV Guide On ScreenTM system. This feature may not be
active in all viewing areas.
Can I record one channel while If you do not connect a cable TV box
watching another? ≥Yes. Change the television’s input mode to “TV”. —
If you connect a cable TV box
≥No. The user cannot watch one program and record another. —
If I have a power failure, will I need to ≥In most cases the scheduled recording of programs will be saved. However, if an 27
reset the scheduled recording of extended power failure occurs, it is strongly recommended that you verify the scheduled
programs I have already set? recording of programs that you had previously set. Press [SCHEDULE] to display the
SCHEDULE screen.
I do not want TV Guide On ScreenTM ≥Select “Off” in “Review options” menu, so that TV Guide On ScreenTM system appears 29
system to automatically appear on only when you press [TV GUIDE].
screen.
I do not want to use TV Guide On ≥Set the unit with “Set Channels Automatically” in the SETUP menu. Note that you can 57
ScreenTM system. set scheduled recording only manually after you set the unit with “Set Channels
Automatically”.
Reference
RQT8023
61
EH50English.book Page 62 Tuesday, February 1, 2005 6:36 PM
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart
do not solve the problem, refer to the “Customer Services Directory” on page 70 if you reside in the U.S.A., or refer to the “Product information” on
page 69 if you reside in Canada.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds. ≥Operations do not work due to a poor-quality disc. (Try again using a
≥Poor reception due to atmospheric conditions. Panasonic disc.)
≥Image disturbance during search. ≥The unit freezes due to one of its safety devices being activated.
≥Interruptions in reception due to periodic satellite broadcasting (Press and hold [POWER Í/I] on the main unit for 10 seconds.
breaks. ≥When the HDD has been automatically placed in the SLEEP mode
≥A sound is heard when the HDD goes into SLEEP mode, or (➡ 4), or the unit is turned on or off, there may be an unexpected
operations are slow to respond in SLEEP mode. sound. This does not indicate a problem with this unit.
Power
No power. ≥Insert the AC power supply cord securely into a known active AC outlet. 12, 13
The unit switches to standby ≥This is a power saving feature. It can be changed if desired using “Off Timer” in the SETUP menu. 54
mode. ≥One of the unit’s safety devices is activated. Press [POWER Í/I] on the main unit to turn the —
unit on.
Displays
The display is dim. ≥Change “Front Display” in the SETUP menu. 56
“12:00A” is flashing on the ≥After setting the TV Guide On ScreenTM system, wait until the clock is downloaded. (The —
unit’s display. flashing “12:00A” will change to the current time.)
≥If the unit's display does not change to the current time even after waiting, we recommend 17
that you set the clock using “Set Clock Manually”.
≥If you do not want to use the TV Guide On ScreenTM system, set the clock with “Set Clock 57
Automatically”.
Compared to the actual ≥The displayed recording/play time is converted from the number of frames at 29.97 frames —
recorded time, the elapsed time (equal to 0.999 seconds) to one second. There will be a slight difference between the time
displayed is less. displayed and the actual elapsed time (e.g., actual one-hour elapsed time may display as
approximately 59 minutes 56 seconds). This does not affect the recording.
The time recorded on the disc ≥Times shown may disagree with actual times. —
and the available time shown ≥Available recording space on DVD-RW (DVD-Video format) increases only when the last —
do not add up. recorded title is erased. It does not increase if other titles are erased.
The play time shown for MP3 ≥Even if you erase recorded content from the DVD-R or +R, there is no increase in disc space. —
does not agree with the actual ≥More disc space than the actual recording time is used after recording or editing the DVD-R —
time. or +R 200 times or more.
≥While searching, the elapsed time may not display correctly. —
The 4:3 aspect ratio picture ≥Use the television to change the aspect. If your television does not have that function, set 37
expands left and right. “Progressive” in the Video menu to “Off”.
≥Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings for 56
Screen size is wrong. DVD-RAM” in the SETUP menu.
There is a lot of after-image ≥Change the settings for “Integrated DNR” to “0” or turn “MPEG-DNR” off if it is on. 37
when playing video.
When playing DVD-Video using ≥Set “Progressive” in the Video menu to “Off”. This problem is caused by the editing method or 37
progressive output, one part of material used on DVD-Video, but should be corrected if you use interlace output.
the picture momentarily
appears to be doubled up.
There is no apparent change in ≥The effect is less perceivable with some types of video. —
picture quality when adjusted
with the Video menu in the on-
screen menus.
RQT8023
62
EH50English.book Page 63 Tuesday, February 1, 2005 6:36 PM
Sound
No sound. ≥Check the connections and the “Digital Audio Output” settings. Check the input mode on the 12–15,
Low volume. amplifier if you have connected one. 56
Distorted sound. ≥Press [AUDIO] to select the audio. 22, 32
Cannot hear the desired audio ≥Turn off V.S.S. in the following cases. 37
type. –When using discs that do not have surround sound effects such as Karaoke discs.
–When playing MTS broadcast programs.
≥The disc may have a restriction on the method of audio output. If “D.MIX” does not appear in —
the display when playing multi-channel DVD-Audio, only audio for the two front channels will
be output. Refer to the disc’s jacket. [DVD-A]
≥Output is not digital with DVD-Audio. —
Cannot switch audio. ≥You cannot switch the audio in the following cases.
–When a DVD-R, DVD-RW (DVD-Video format) or +R disc is in the disc tray while DVD drive —
is selected.
–When the recording mode is XP and “Audio for XP Recording” is set to “LPCM”. 56
–When “Rec. for High-Speed Dubbing” is set to “On”. 22
≥When connecting an amplifier using an optical digital cable, you cannot switch the audio if 56, 15
“Dolby Digital” is set to “Bitstream”. Set “Dolby Digital” to “PCM” or connect using audio cables.
≥There are discs for which audio cannot be changed because of how the disc was created. —
Operation
Cannot operate the television. ≥Change the manufacturer code. Some televisions cannot be operated even if you change the 19
The remote control doesn’t code.
work. ≥The remote control and main unit are using different codes. Change the code on the remote control. 19
Press and hold [ENTER] and the indicated number button at
the same time for more than 2 seconds.
RQT8023
63
EH50English.book Page 64 Tuesday, February 1, 2005 6:36 PM
Troubleshooting guide
RQT8023
64
EH50English.book Page 65 Tuesday, February 1, 2005 6:36 PM
Troubleshooting guide
Play Page
Play fails to start even when ≥Insert the disc correctly with the label facing up. 30
[1] (PLAY) is pressed. ≥The disc is dirty. 5
Play starts but then stops ≥You tried to play a blank disc or disc unplayable on this unit. 8, 9
immediately. ≥You tried to play a +RW that needs to be finalized on the equipment used for recording. —
≥You may be able to transfer (dub) a “One time only recording” title that was recorded to DVD- —
RAM using a different Panasonic DVD Recorder to this unit’s HDD, but play is not possible
due to copyright protection.
≥When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD players 55
that are compatible with DVD-RAM. In this case use EP (6H) mode.
Audio and video momentarily ≥This occurs between playlist chapters. —
pause. ≥This occurs between chapters and with partially deleted titles on finalized DVD-R, DVD-RW —
(DVD-Video format) and +R that have been transferred (dubbed) using the high speed mode.
≥This occurs as scenes change during Quick View. —
DVD-Video is not played. ≥You have set a ratings level to limit DVD-Video play. Change this setting. 55
Alternative soundtrack and ≥The languages are not recorded on the disc. —
subtitles cannot be selected. ≥You may not be able to use the on-screen menus to change the soundtrack and subtitles on 31
some discs. Use the disc’s menus to make changes.
No subtitles. ≥When progressive output is on, closed captions cannot be displayed. —
≥Subtitles are not recorded on the disc. —
≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”. 36
Angle cannot be changed. ≥Angles can only be changed during scenes where different angles are recorded. —
You have forgotten your ratings ≥The ratings level returns to the factory preset. While the disc tray is open, press [DVD] then —
password. press and hold [¥ REC] and [1] (PLAY) on the main unit at the same time for 5 or more
You want to cancel the ratings seconds (“INIT” will appear on the unit’s display).
level.
Quick View does not work. ≥This does not work when audio is other than Dolby Digital. —
≥[HDD] [RAM] This does not work when recording is in XP or FR mode. —
The resume play function does ≥This function only works when “PLAY” is flashing on the unit display. —
not work. ≥Memorized positions are canceled when the unit is turned off or when the tray is opened. The —
memorized position on the playlist is also canceled when the playlist and title are edited.
Edit
Cannot format. ≥The disc is dirty. Wipe with a damp cloth and then wipe dry. 5
≥You tried formatting a disc that you may not be able to use in this unit. 8, 9
Cannot create chapters. ≥The unit writes the chapter division information to the disc when you turn it off or remove the —
disc. The information is not written if there is an interruption to the power before this.
Cannot mark the start point or ≥These operations are not possible with still pictures. —
the end point during “Shorten ≥You cannot set points if they are too close to each other. You cannot set an end point before a —
Title” operation. start point.
Cannot erase chapters. ≥When the chapter is too short to erase, use “Combine Chapters” to make the chapter longer. 39
The available recording time ≥Available recording space on the DVD-R and +R does not increase even after erasing —
doesn’t increase even after previously recorded titles.
erasing recordings on the disc. ≥Disc space on a DVD-RW (DVD-Video format) increases only when the last recorded title is —
erased. It does not increase if other titles are erased.
Cannot create a playlist. ≥You cannot select all the chapters at once in a title if the title also includes still pictures. Select —
them individually.
Still pictures
Cannot display Direct ≥This screen cannot be displayed during recording or transfer (dubbing). —
Navigator screen.
Cannot edit or format a card. ≥Release the card’s protection setting. (With some cards, the “Write Protection Off” message 50
sometimes appears on the screen even when protection has been set.)
The contents of the card ≥The card format is not compatible with the unit. (The contents on the card may be damaged.) 9, 35, 51
cannot be read. Format using FAT 12 or FAT 16 with other equipment or format the card with this unit.
≥The card contains a folder structure and/or file extensions that are not compatible with this 9
unit.
≥Turn off and then turn on the unit again. —
Reference
Transferring (dubbing), erasing ≥When there are a lot of folders and files, it may sometimes take a few hours. —
and setting protection takes a ≥When repeating transferring (dubbing) or erasing, it may sometimes take a long time. Format 51
long time. the disc or card.
Scheduled recording began in ≥If it comes to the time scheduled for recording, the recording may start even though you are —
the middle of editing a still editing.
picture.
RQT8023
66
EH50English.book Page 67 Tuesday, February 1, 2005 6:36 PM
Specifications
Audio system
Recording system:
Recording system: Dolby Digital, Linear PCM (XP mode)
DVD-RAM: DVD Video Recording format
Input: LINE (pin jack)a3
DVD-R: DVD-Video format
Reference input: 309 mVrms
DVD-RW: DVD-Video format FS: 2 Vrms (1 kHz, 0 dB)
Input impedance: 47 k≠
Internal HDD Capacity: 100 GB Output: LINE (pin jack)a2
Reference output: 309 mVrms
Recording time: FS: 2 Vrms (1 kHz, 0 dB)
≥Maximum 8 hours (using 4.7 GB disc) Output impedance: 1 k≠
XP: 60 minutes SP: 120 minutes (Load impedance: 10 k≠)
LP: 240 minutes EP: 360 minutes or 480 minutes
≥Maximum 177 hours with HDD (EP 8H mode) Number of channels: Recording: 2 channels
Playback: 2 channels
Playable discs:
DVD-RAM DVD-R
DVD-RW +R SD card slot
+RW Still picture (JPEG, SD Memory Card slot: 1 pc
DVD-Video DVD-Audio TIFF)
CD-Audio (CD-DA) Video CD Compatible media SD Memory Card§, MultiMediaCard
§ Includes miniSDTM cards. (A miniSDTM
CD-R/CD-RW (CD-DA, Video CD, MP3, JPEG formatted discs)
card adaptor needs to be inserted.)
Format FAT12, FAT16
Optical pick-up:
System with 1 lens, 2 integrated units Image file format: JPEG conforming to DCF (Design rule
(662 nm wavelength for DVDs, 795 nm wavelength for CDs) for Camera File system) (sub sampling;
4:2:2 or 4:2:0)
TIFF (Uncompressed RGB chunky),
LASER Specification
DPOF Compatible
Class I LASER Product
Wave Length: 795 nm (CDs) Number of pixels: 34 a 34 to 6144 a 4096
662 nm (DVDs) Thawing time: Approx. 7 sec (2 M pixels)
Laser power: No hazardous radiation is emitted with
the safety protection Other input/output connector:
Digital audio optical output connector
Television system G-LINK terminal: Only use the included IR Blaster
TV system: NTSC system, 525 lines, 60 fields
Regional code: ‚1
Antenna reception TV Channel: 2 ch–69 ch, 75 ≠
input: CATV Channel: 1 ch–125 ch, 75 ≠ Clock unit: Quartz-controlled 12-hour digital display
RF converter output: Not provided Operating temperature range: 5 oC–40 oC (41 oF–104 oF)
Operating humidity range: 10 %–80 % RH (no condensation)
(Approx.1615/16qk21/2qk1313/16q)
User memo:
The model number and serial number of this product can be
DATE OF PURCHASE _______________________________
found on either the back or the bottom of the unit.
DEALER NAME ____________________________________
Please note them in the space provided below and keep for
DEALER ADDRESS _________________________________
future reference.
__________________________________________________
MODEL NUMBER DMR-EH50 TELEPHONE NUMBER ______________________________
RQT8023
SERIAL NUMBER
67
EH50English.book Page 68 Tuesday, February 1, 2005 6:36 PM
Glossary
Bitstream Formatting
This is the digital form of multi-channel audio data (e.g., 5.1 channel) Formatting is the process of making media such as DVD-RAM
before it is decoded into its various channels. recordable on recording equipment.
You can format the HDD, DVD-RAM, DVD-RW (only as DVD-Video
CPRM (Content Protection for Recordable Media)
format) and SD memory card on this unit. Formatting irrevocably
CPRM is technology used to protect broadcasts that are allowed to
erases all contents.
be recorded only once. Such broadcasts can be recorded only with
CPRM compatible recorders and discs. Frames and fields
Frames refer to the single images that constitute the video you see
Decoder
on your television. Each frame consists of two fields.
A decoder restores the coded audio signals on DVDs to normal. This
is called decoding.
Dolby Digital u r
This is a method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2-channel) audio, these signals can
also be multi-channel audio. A large amount of audio information can Frame Field Field
be recorded on one disc using this method. ≥A frame still shows two fields, so there may be some blurring, but
When recording on this unit Dolby Digital (2 channel) is the default picture quality is generally better.
audio. ≥A field still shows less picture information so it may be rougher, but
there is no blurring.
Down-mixing
This is the process of remixing the multi-channel audio found on HDD (Hard disk drive)
some discs into two channels. It is useful when you want to listen to This is a mass data storage device used in computers, etc. A disk
the 5.1-channel audio recorded on DVDs through your television’s with a surface that has been treated with magnetic fluid is spun and
a magnetic head is brought in close proximity to facilitate the reading
speakers. Some discs prohibit down-mixing and this unit can then
and writing of large amounts of data at high speed.
only output the front two channels.
JPEG (Joint Photographic Experts Group)
DPOF (Digital Print Order Format) This is a system used for compressing/decoding color still pictures. If
DPOF is the standard printing format for still picture data taken by a you select JPEG as the storage system on digital cameras, etc., the
digital camera, etc. It is used for automatic printing at a photo data will be compressed to 1/10–1/100 of its original size. The
developing store or on your home printer. benefit of JPEG is less deterioration in picture quality considering
Drive the degree of compression.
In the instance of this unit, this refers to the hard disk (HDD), disc LPCM (Linear PCM)
(DVD) and SD card (SD). These perform the reading and writing of These are uncompressed digital signals, similar to those found on
data. CDs. LPCM sound is available when recording in XP mode.
DTS (Digital Theater Systems) MP3 (MPEG Audio Layer 3)
This surround system is used in many movie theaters. There is good
An audio compression method that compresses audio to
separation between the channels, so realistic sound effects are
approximately one tenth of its size without any considerable loss of
possible.
audio quality. You can play MP3 you have recorded onto CD-R and
Dynamic range CD-RW.
Dynamic range is the difference between the lowest level of sound
Pan&Scan/Letterbox
that can be heard above the noise of the equipment and the highest
In general, DVD-Video are produced with the intention that they be
level of sound before distortion occurs.
viewed on a widescreen television (16:9 aspect ratio), so images
Dynamic range compression means reducing the gap between the
often don’t fit regular (4:3 aspect ratio) televisions. Two styles of
loudest and softest sounds. This means you can listen at low
picture, “Pan & Scan” and “Letterbox”, deal with this problem.
volumes but still hear dialog clearly.
Pan&Scan: The sides are cut off so the picture fills
EPG (Electronic Program Guide) the screen.
This is a system used to display the television program list on
televisions, computers and cellular phones. Data is transmitted using Letterbox: Black bands appear at the top and
the internet or television waves. This unit is compatible with the bottom of the picture so the picture itself
method using television waves. You can use the television program appears in an aspect ratio of 16:9.
list for functions such as scheduled recording.
Playback control (PBC)
Film and video If a Video CD has playback control, you can select scenes and
DVD-Video are recorded using either film or video. This unit can information with menus.
determine which type has been used, then uses the most suitable (This unit is compatible with version 2.0 and 1.1.)
method of progressive output.
Film is 24 or 30 frames per second, with motion picture film generally Progressive/Interlace
being 24 frames per second. NTSC, the video signal standard, has 480 interlaced (i) scan lines,
whereas progressive scanning uses twice the number of scan lines.
Reference
RQT8023
68
EH50English.book Page 69 Tuesday, February 1, 2005 6:36 PM
Protection
You can prevent accidental erasure by setting writing protection or
erasure protection.
Sampling frequency
Sampling is the process of converting the heights of sound wave
(analog signal) samples taken at set periods into digits (digital
encoding). Sampling frequency is the number of samples taken per
second, so larger numbers mean more faithful reproduction of the
original sound.
Thumbnail
This refers to a miniature representation of a picture used to display
multiple pictures in the form of a list.
TIFF (Tag Image File Format)
This is a system used for compressing/decoding color still pictures, a
common format for storing high quality images on digital cameras
and other devices.
Language code list Enter the code with the numbered buttons.
Abkhazian: 6566 Catalan: 6765 Gujarati: 7185 Lingala: 7678 Rhaeto-Romance: Tamil: 8465
Afar: 6565 Chinese: 9072 Hausa: 7265 Lithuanian: 7684 8277 Tatar: 8484
Afrikaans: 6570 Corsican: 6779 Hebrew: 7387 Macedonian: 7775 Romanian: 8279 Telugu: 8469
Albanian: 8381 Croatian: 7282 Hindi: 7273 Malagasy: 7771 Russian: 8285 Thai: 8472
Ameharic: 6577 Czech: 6783 Hungarian: 7285 Malay: 7783 Samoan: 8377 Tibetan: 6679
Arabic: 6582 Danish: 6865 Icelandic: 7383 Malayalam: 7776 Sanskrit: 8365 Tigrinya: 8473
Armenian: 7289 Dutch: 7876 Indonesian: 7378 Maltese: 7784 Scots Gaelic: 7168 Tonga: 8479
Assamese: 6583 English: 6978 Interlingua: 7365 Maori: 7773 Serbian: 8382 Turkish: 8482
Aymara: 6589 Esperanto: 6979 Irish: 7165 Marathi: 7782 Serbo-Croatian:8372 Turkmen: 8475
Azerbaijani: 6590 Estonian: 6984 Italian: 7384 Moldavian: 7779 Shona: 8378 Twi: 8487
Bashkir: 6665 Faroese: 7079 Japanese: 7465 Mongolian: 7778 Sindhi: 8368 Ukrainian: 8575
Basque: 6985 Fiji: 7074 Javanese: 7487 Nauru: 7865 Singhalese: 8373 Urdu: 8582
Bengali; Bangla: Finnish: 7073 Kannada: 7578 Nepali: 7869 Slovak: 8375 Uzbek: 8590
6678 French: 7082 Kashmiri: 7583 Norwegian: 7879 Slovenian: 8376 Vietnamese: 8673
Bhutani: 6890 Frisian: 7089 Kazakh: 7575 Oriya: 7982 Somali: 8379 Volapük: 8679
Bihari: 6672 Galician: 7176 Kirghiz: 7589 Pashto, Pushto:8083 Spanish: 6983 Welsh: 6789
Breton: 6682 Georgian: 7565 Korean: 7579 Persian: 7065 Sundanese: 8385 Wolof: 8779
Bulgarian: 6671 German: 6869 Kurdish: 7585 Polish: 8076 Swahili: 8387 Xhosa: 8872
Burmese: 7789 Greek: 6976 Laotian: 7679 Portuguese: 8084 Swedish: 8386 Yiddish: 7473
Byelorussian: 6669 Greenlandic: 7576 Latin: 7665 Punjabi: 8065 Tagalog: 8476 Yoruba: 8979
Cambodian: 7577 Guarani: 7178 Latvian, Lettish:7686 Quechua: 8185 Tajik: 8471 Zulu: 9085
Product Service
1. Damage requiring service—The unit should be serviced by qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
Reference
Product information
RQT8023
69
EH50English.book Page 70 Tuesday, February 1, 2005 6:36 PM
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to:
npcparts@us.panasonic.com
Reference
RQT8023
70
EH50English.book Page 71 Tuesday, February 1, 2005 6:36 PM
WARRANTY SERVICE
For product operation and information assistance, please contact your Dealer or our Customer Care Centre at: Telephone #: (905) 624-5505
Fax #: (905) 238-2360 Web: www.panasonic.ca
Reference
RQT8023
71
EH50English.book Page 72 Tuesday, February 1, 2005 6:36 PM
Instalación básica
≥Las conexiones del equipo descritas son ejemplos. ≥Necesita suscribirse a los servicios de TV por cable para ver su
≥Antes de hacer la conexión, apague todos los equipos y lea los programación.
manuales de instrucciones apropiados. ≥Consulte a su proveedor de servicios en cuanto al receptor de TV
por cable apropiado.
≥El equipo periférico y los cables opcionales se venden por ≥Si recibe únicamente su programación de un servicio de satélite,
separado a menos que se indique lo contrario. la guía de programas de esta unidad no recibirá las listas de
La conexión permitirá que la videograbadora sea utilizada para programas ni la información de los canales. Sin esta información
reproducir cuando la unidad esté apagada. Se recomienda conectar no se podrán hacer grabaciones basadas en programas. Sin
embargo, sí se podrán hacer grabaciones manualmente.
esta unidad como se muestra abajo para que el funcionamiento sea
óptimo. La conexión permitirá que la videograbadora sea utilizada para
reproducir cuando la unidad esté apagada. Se recomienda conectar esta
A indica accesorios incluidos. unidad como se muestra abajo para que el funcionamiento sea óptimo.
indica accesorios no incluidos. A indica accesorios incluidos.
B Televisión indica accesorios no incluidos.
C Rojo Blanco Amarillo B Televisión
D Cable de pared o señal de antena C Rojo Blanco Amarillo
videograbadora, los sistemas de protección del copyright afectarán T Lea las instrucciones del receptor de TV por cable
a la señal de vídeo y la imagen podrá no mostrarse correctamente. relacionadas con la posición del sensor de señales.
≥Cuando conecte a un televisor con videograbadora
U Si es necesario, utilice cinta con adhesivo en ambas caras
incorporada (incluida) para asegurar el IR Blaster a una superficie plana.
Conecte a los terminales de entrada del televisor si hay terminales
V Ej. Superficie de base de televisión
de entrada de televisor y videograbadora.
W Si despega la cinta adhesiva, la superficie podrá dañarse.
Después de confirmar que el receptor de TV por cable
∫ Para disfrutar de fidelidad más alta esté funcionando correctamente, asegúrelo empleando la
RQT8023
Si su televisor tiene terminales S VIDEO IN o COMPONENT VIDEO cinta adhesiva.
72 IN podrá disfrutar de fidelidad más alta.
EH50English.book Page 73 Tuesday, February 1, 2005 6:36 PM
T
IGA
TIO
D
DIRECT NAVIGATOR y lista para descargar el grupo de canales y las listas de programas.
NS
Insértelo con la
2 Pulse [3, 4, 2, 1] para seleccionar el programa.
flecha hacia adentro. ≥Para saltar una pantalla
Pulse [PAGE W] o [PAGE X].
Insértelo completamente en su lugar ≥Para saltar 24 horas en la lista
hasta que haga un ruido seco. Pulse [3, 4, 2, 1] para seleccionar “LISTINGS” y:
3 Pulse [W X CH] para seleccionar el canal. Pulse el botón “Verde” (avance).
Pulse el botón “Azul” (retroceso).
Para seleccionar con los botones numerados:
Modo de antena Modo de TV por cable
3 Pulse el botón “Verde”.
Ej., 5: [0] ➡ [5] Ej., 5: [0] ➡ [0] ➡ [5] “ R ” aparece en la lista para indicar que el programa está
15: [1] ➡ [5] 15: [0] ➡ [1] ➡ [5] preparado para la grabación programada.
115: [1] ➡ [1] ➡ [5] ≥Pulse el botón “Verde” para cancelar.
≥Pulse el botón “Azul” varias veces para cambiar la frecuencia
4 Pulse [REC MODE] para seleccionar el modo de de grabación. (➡ arriba, Marca de grabación y frecuencia de
grabación (XP, SP, LP o EP). grabación)
Repita los pasos 2–3 para programar otras grabaciones.
5 Pulse [¥ REC] para empezar a grabar.
La grabación se hará en el espacio vacío de la HDD o del disco.
4 Pulse [TV GUIDE].
Vuelve a la pantalla del televisor.
Los datos no se escribirán encima de otros.
≥La unidad se pone en espera de grabación programada (“F” se
≥Durante la grabación no puede cambiar el canal ni el modo de
enciende en el visualizador de la unidad) pero no se apaga
grabación. Podrá cambiarlos durante la pausa, sin embargo, la automáticamente. Para ahorrar energía, apague la unidad
grabación será entonces un título separado. pulsando [Í DVD POWER].
Para cancelar la grabación cuando ésta ya ha empezado
Para especificar un tiempo y detener la grabación Pulse [∫] y luego [ENTER] antes de que pasen 5 segundos.
Durante la grabación ≥También puede mantener pulsado [∫] en el aparato principal
Pulse [¥ REC] para seleccionar el tiempo de grabación. durante más de 3 segundos para detener la grabación.
Para hacer una pausa en la grabación
Pulse [;]. Reproducción mientras usted está grabando
Pulse de nuevo para reiniciar la grabación. [HDD] [RAM]
(El título no se divide en un título separado.)
Reproduc- Puede reproducir desde el comienzo del título que
Para detener la grabación ción con está grabando.
Pulse [∫]. presecución Pulse [1] (PLAY) durante la grabación.
La sección desde que empieza hasta que termina la grabación es
un título. Mientras graba puede reproducir un título grabado
previamente.
∫ Modo de grabación Grabación y 1 Pulse [DIRECT NAVIGATOR] durante la
Dependiendo del contenido que está siendo grabado, los tiempos grabación.
reproducción
de grabación pueden ser inferiores a los indicados. 2 Pulse [3, 4, 2, 1] para seleccionar un título
simultáneas y pulse [ENTER].
(Unidad: hora)
≥Para salir de la pantalla Direct Navigator
DVD-RAM DVD-R Pulse [DIRECT NAVIGATOR].
Modo HDD Una cara Dos DVD-RW
(100 GB) +R Mientras graba podrá reproducir una escena del
(4,7 GB) caras§1 título que está siendo grabado o de un título grabado
(9,4 GB) (4,7 GB) anteriormente. Se muestra la imagen que está
XP (Alta calidad) 22 1 2 1 siendo reproducida y la grabada.
1 Pulse [TIME SLIP] durante la grabación.
Español
Reproducción
Index
“DTS” and “DTS 2.0 i Digital Out” are trademarks of Digital Theater This product incorporates copyright protection technology that is
Systems, Inc. protected by U.S. patents and other intellectual property rights. Use
of this copyright protection technology must be authorized by
U.S. patent Nos. 4,631,603, 4,577,216, 4,819,098, and 4,907,093. Macrovision, and is intended for home and other limited consumer
uses only unless otherwise authorized by Macrovision. Reverse
MPEG Layer-3 audio decoding technology licensed from Fraunhofer engineering or disassembly is prohibited.
IIS and Thomson multimedia.
[For\U.S.A.]
Panasonic Consumer Electronics Panasonic Puerto Rico, Inc.
[For\Canada]
Panasonic Canada Inc. pr
Company, Division of Panasonic Ave. 65 de Infantería, Km. 9.5 5770 Ambler Drive
Corporation of North America San Gabriel Industrial Park, Carolina, Mississauga, Ontario
One Panasonic Way Secaucus, Puerto Rico 00985 L4W 2T3
New Jersey 07094 www.panasonic.ca
http://www.panasonic.com