Professional Documents
Culture Documents
Operating Instructions
DVD Recorder
Model No. DMR-EH50
2
2 ALL 3
5
Dear customer
Thank you for purchasing this product. For optimum
performance and safety, please read these
instructions carefully.
[Note]
“EB” on the packaging indicates the United
Kingdom.
EB RQT8033-3B
EH50.book Page 2 Tuesday, July 5, 2005 11:03 AM
Check for the ASTA mark Ï or the BSI mark Ì on the body of the
WARNING: fuse.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS If the plug contains a removable fuse cover you must ensure that it is
TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT refitted when the fuse is replaced.
NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, If you lose the fuse cover the plug must not be used until a
SHALL BE PLACED ON THE APPARATUS. replacement cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
CAUTION! CAUTION!
≥DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT SHOULD BE REMOVED AND THE PLUG CUT OFF AND
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO DISPOSED OF SAFELY.
OVERHEATING, ENSURE THAT CURTAINS AND ANY THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK
OTHER MATERIALS DO NOT OBSTRUCT THE IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-
VENTILATION VENTS. AMPERE SOCKET.
≥DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS
If a new plug is to be fitted please observe the wiring code as stated
WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND
below.
SIMILAR ITEMS.
If in any doubt please consult a qualified electrician.
≥DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS
LIGHTED CANDLES, ON THE UNIT.
≥DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
IMPORTANT
The wires in this mains lead are coloured in accordance with the
FRIENDLY MANNER.
following code:
Blue: Neutral, Brown: Live.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
As these colours may not correspond with the coloured markings
(➡page 71, Specifications—Others)
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
This product may receive radio interference caused by mobile which is marked with the letter N or coloured Black or Blue.
telephones during use. If such interference is apparent, please The wire which is coloured Brown must be connected to the terminal
increase separation between the product and the mobile
which is marked with the letter L or coloured Brown or Red.
telephone.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
The socket outlet shall be installed near the equipment and
EARTH TERMINAL WHICH IS MARKED WITH THE
easily accessible or the mains plug or an appliance coupler shall
remain readily operable.
LETTER E, BY THE EARTH SYMBOL Ó OR COLOURED
GREEN OR GREEN/YELLOW.
Before use
Remove the connector cover.
DANGER - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. 1. Open the fuse cover with a screwdriver.
AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)
CAUTION - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. Figure A Figure B
AVOID EXPOSURE TO BEAM. (IEC60825-1)
-
ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE.
EXPOSITION DANGEREUSE AU FAISCEAU.
ADVARSEL - SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
UNDGÅ UDSÆTTELSE FOR STRÅLING.
VARO! - AVATTAESSA OLET ALTTIINA NÄKYVÄÄ JA NÄKYMÄTÖN
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
Fuse cover
VARNING - SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.
ADVARSEL - SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES.
UNNGÅ EKSPONERING FOR STRÅLEN.
VORSICHT - SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG
GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
-
-
RQLS0233 (Inside of product)
2. Replace the fuse and close or attach the fuse cover.
Keep the small memory cards such as the SD Figure A Figure B
Memory Card out of reach of children. If
swallowed, seek medical advice immediately. Fuse
Fuse
(5 ampere)
(5 ampere)
Table of contents
Getting started
Inserting, Removing the SD card . . . . . . . . . . . . . . . . . . .6
Editing and playing playlists/chapters. . . . . . . . . . . . . . . . . . . . 43
Note to owners of progressive compatible Playlist operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
PAL system televisions . . . . . . . . . . . . . . . . . . . . . . . . . .6 Chapter operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Using DVD-R, DVD-RW and +R on this unit . . . . . . . . . . 7 Editing still pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Included accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Picture and folder operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
The remote control information . . . . . . . . . . . . . . . . . . . 8
HDD, disc and card information . . . . . . . . . . . . . . . . . . . 9 Transferring (Dubbing)
Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . 12 Transferring (dubbing) titles or playlists . . . . . . . . . . . 45
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Transferring (dubbing) using the transferring (dubbing) list . . . 46
Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Transferring (dubbing) a finalized DVD-R, DVD-RW (DVD-Video
The unit’s display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
format) and +R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
STEP 1 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Recording from a video cassette recorder. . . . . . . . . . 49
STEP 2 Channel reception settings . . . . . . . . . . . . . . . 19 Transferring (dubbing) still pictures . . . . . . . . . . . . . . . 50
STEP 3 Set up to match your television Transferring (dubbing) using the transferring (dubbing) list . . . 50
and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Transferring (dubbing) all the still pictures on a card
To enjoy progressive video . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 —COPY ALL PICTURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Useful features
This DVD Recorder records high quality pictures to rapid random SD card slot
access capable HDD (Hard disk drive) and DVD-RAM. This has The SD card slot of this unit lets you play digital camera photographs
resulted in many new features that outperform older tape formats. and transfer (dub) them from a card to DVD-RAM for easy storage
The following information summarizes a few of these features. without using a computer.
Instant recording Instant play
You no longer need to search for empty disc space. By pressing the
There is no need to rewind or search forward. Direct Navigator
recording button, the unit finds available recording space and begins
guides you to the beginning of the recorded video immediately.
recording right away. There is no need to worry about overwriting
already recorded content. Chasing playback
There is no need to wait until recording is complete. Without
1 Sec. Quick Start for Recording on DVD-RAM and HDD stopping recording, you can play the video currently being recorded
From the power off state, recording on DVD-RAM and HDD starts from its beginning.
about 1 second after first pressing the Power button and then
sequentially pressing the REC button (Quick Start Mode). Simultaneous Recording and Playback
HDD recording While recording, you can play another video programme that was
recorded previously.
You can keep on recording your favorite programmes to an internal
HDD that is able to record up to 142 hours [EP (8 Hours) mode]. Time Slip
You can also high speed transfer (dub) your favorite programmes to During play, and also while recording, you can jump to the scene you
DVD-RAM, DVD-R, DVD-RW (DVD-Video format) or +R and create a wish to view by specifying the skip time.
backup disc.
RQT8033
3
EH50.book Page 4 Tuesday, July 5, 2005 11:03 AM
The HDD is a high precision recording instrument and because of its long recording capability and high speed operation it is a very special device
that is easily susceptible to damage.
As a basic rule, save important video content to a disc as backup.
∫ The HDD is a device that is not built to withstand vibration/shock or dust
Depending on the setup environment and handling of the HDD some content may become damaged and play and recording may no longer be
possible. Especially during operation, do not subject the unit to any vibration, shock, or remove the AC mains lead from the household mains
socket. In the event of a power failure during recording or play, the content may be damaged.
Getting started
≥When the HDD has been automatically placed in the SLEEP mode (➡ below), or the unit is turned on or off, there may be an unexpected sound.
This does not indicate a problem with this unit.
RQT8033
4
EH50.book Page 5 Tuesday, July 5, 2005 11:03 AM
Getting started
∫ Concerning non-cartridge discs ≥Do not use scratch-proof protectors or covers.
Be careful about scratches and dirt. ≥Do not expose the terminals of the card to water, garbage or other
strange things.
≥Do not drop stack, or impact discs. Do not place objects on them.
∫ If there is dirt or condensation on the disc ≥Do not use the following discs:
Wipe with a damp cloth and then wipe dry.
–Discs with exposed adhesive from removed stickers or labels
(rental discs, etc.).
–Discs that are badly warped or cracked.
–Irregularly shaped discs, such as heart
shapes.
The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem
with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused by
such loss.
Examples of causes of such losses are
≥A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company.
≥A disc used as described above and then played again in this unit.
≥A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit.
Unit care
The precision parts in this unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown. Do not place the unit on
To clean this unit, wipe with a soft, dry cloth. amplifiers or equipment
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the
that may become hot.
instructions that came with the cloth. The heat can damage the unit.
Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, making it [Note]
impossible to record or play discs. Do not obstruct the rear panel’s internal cooling fan.
Use the DVD-RAM lens cleaner about once every year, depending
on frequency of use and the operating environment. Carefully read
the lens cleaner’s instructions before use.
Before moving the unit, ensure the disc tray is empty.
Lens cleaner: LF-K123LCA1 or RP-CL720 (On sale from May Failure to do so will risk severely damaging the disc and the
2005) unit.
RQT8033
5
EH50.book Page 6 Tuesday, July 5, 2005 11:03 AM
Only insert or remove the SD card after turning the unit off.
When the card indicator (“SD”) on the unit’s display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.
Such action may result in malfunction or loss of the card’s contents.
Opening the cover Inserting the card Removing the card Closing the cover
Getting started
Press down. Press on the centre of the 1 Press on the centre of Push up.
If you are using a
card until it clicks into miniSDTM card, insert it the card.
place. into the miniSDTM card 2 Pull it straight out.
adaptor that comes
with the card. ADAPTER
COMPONENT COMPONENT
VIDEO IN VIDEO IN
Progressive output
Progressive output
COMPONENT COMPONENT
VIDEO OUT VIDEO OUT
RQT8033
6
EH50.book Page 7 Tuesday, July 5, 2005 11:03 AM
Getting started
M1 M2
e.g.,
Hello Hallo The selected audio only is recorded.
e.g., M 1 only
Therefore, follow the steps below when you use DVD-R, etc.
∫ When you want to transfer (dub) titles in high speed mode from the HDD to DVD-R, etc.
Set “Rec for High Speed dubbing” to “On” before recording to the HDD (➡ 26).
You can transfer (dub) titles in high speed mode (max. speed is 64k§); however, the following settings are necessary before recording to the
HDD.
§ Depending on the disc, max. speed may vary.
Í
1
;
∫
DISPLAY
TOP MENU
RETURN SUB
MENU -TITLE
ANGLE
AUDIO
A.SURROUND CANCEL
3
2
1 S10
6
Finalize
5
4 0
9
8
7 9
:
5 VOLUME
6
PAGE r
GROUP s
CHG
SEARCH
ENTER
VOL
DISPLAY
MENU
TOP
RETURN
ON
MENU
OFF
DC
IN
9V
Í /I Í DOUBLE RE-MASTER CD SEQUENTIAL DISC 1 2 3 4 5 ∫ ; 1 :/6 5/9 DISC EXCHANGE DISC SKIP <OPEN/CLOSE
OPEN
UND
A.SURRO
REPEAT
MODE
MONITOR
MODE
PICTURE
RQT8033
7
EH50.book Page 8 Tuesday, July 5, 2005 11:03 AM
Included accessories
Please check and identify the supplied accessories. ∫ Sales and Support Information
Use numbers when asking for replacement parts. Customer Care Centre
(Product numbers correct as of February 2005. These ≥For customers within the UK: 08705 357357
may be subject to change.) ≥For customers within the Republic of Ireland: 01 289 8333
∏ ∏ ≥Visit our website for product information
≥E-mail: customer.care@panasonic.co.uk
Getting started
20
30 20
[Note]
If you cannot operate the unit or television using the remote control
after changing the batteries, please re-enter the codes (➡ 23).
RQT8033
8
EH50.book Page 9 Tuesday, July 5, 2005 11:03 AM
HDD and discs you can use for recording and play
DVD-RAM DVD-R (DVD-Video format)
Hard disk drive (HDD)
Disc type ≥4.7 GB/9.4 GB, 12 cm ≥4.7 GB, 12 cm
≥80 GB
≥2.8 GB, 8 cm ≥1.4 GB, 8 cm
Getting started
Logo –
≥We recommend using Panasonic discs and cards. We also recommend using DVD-RAM discs with cartridges to protect them from scratches and dirt.
≥Discs from other manufacturers may not be recorded or played due to the condition of the recording.
≥You may not be able to record to DVD-R, DVD-RW and +R discs on this unit or play them due to the condition of the recording.
≥You cannot record programmes that allow “One time only recording” to CPRM compatible DVD-R and DVD-RW on this unit.You can record other
programmes as DVD-Video format.
≥This unit cannot record to discs containing both PAL and NTSC signals. (However, both types of programmes can be recorded onto the HDD.)
Play of discs recorded with both PAL and NTSC on another unit is not guaranteed.
§ You cannot consecutively record or play both sides.
[Note]
When “Rec for High Speed dubbing” is set to “On”, the restrictions on secondary audio recording etc. are also applied to DVD-RAM. Turn this
setting “Off” if high speed transfer (dubbing) to DVD-R, etc. is not necessary when recording a programme (➡ 26). RQT8033
9
EH50.book Page 10 Tuesday, July 5, 2005 11:03 AM
Logo – –
Indicated in these
[DVD-V] [DVD-A] [-RW‹VR›] [DVD-V] [CD] [VCD]
instructions by
Instructions High quality High fidelity DVD-RW recorded on +RW Recorded CD-R and CD- Recorded
movie and music discs another DVD Recorder§ recorded on audio and RW§ with music music and
≥Played on another DVD
music discs ≥You can play music recorded in MP3 video
this unit in 2 §
programmes that allow Recorder (including (➡ 35) (including
channels.
“One time only CD-R/RW§) Still pictures CD-R/RW§)
recording” if they have (JPEG and
been recorded to a TIFF) recorded
CPRM compatible on CD-R/RW§
disc.
≥By formatting (➡ 53)
the disc, you can
record to it in DVD-
Video format and play
it on this unit.
≥It may be necessary to finalize the
disc on the equipment used for
recording.
≥You can play still pictures (JPEG/TIFF), CD-DA, Video CD and MP3 format data recorded on CD-R/RW. Close the session or finalize the disc
after recording.
≥The producer of the disc can control how discs are played. So you may not always be able to control play as described in these operating
instructions. Read the disc’s instructions carefully.
§
Play may be impossible on some CD-R, CD-RW, DVD-RW or +RW discs due to the condition of the recording.
Regarding DVD-Audio
Some multi-channel DVD-Audio will prevent down-mixing (➡ 69) of all or part of their contents if this is the manufacturer’s intention. Tracks that
are prevented from being down-mixed will not play properly on this unit (e.g. audio is played from the front two channels only). Refer to the
disc’s jacket for more information.
Getting started
Indicated in these instructions
[SD]
by
IM¢¢CDPF or IMEXPORT §
XXXX¢¢¢¢.JPG
XXXX¢¢¢¢.TIF
XXXX¢¢¢¢.JPG
DCIM
§ XXXX¢¢¢¢.TIF
¢¢¢XXXXX
XXXX¢¢¢¢.JPG
XXXX¢¢¢¢.TIF
§ Folders can be created on other equipment. However, these folders cannot be selected as a transferring (dubbing) destination.
≥The folder cannot be displayed if the numbers are all “0” (e.g., DCIM000, etc.).
≥If a folder name or file name has been input using other equipment, the name may not be displayed properly or you may not be able to play
or edit the data.
RQT8033
11
EH50.book Page 12 Tuesday, July 5, 2005 11:03 AM
Remote control
Instructions for operations are generally described using the remote control.
G
T
NAVIIREC
TOP ME
IONS
D
DISPLAY
L
: Timer recording standby/release (➡ 28–30)
SUB MENU
I M Linked timer recordings with external equipment (➡ 31)
RETURN
N Recording functions
㧿
; CREATE J
AUDIO STATUS CHAPTER ERASE
< A B C K [Note]
= REC REC MODE EXT LINK TIMER L ≥Buttons such as the [¥ REC] button do not protrude as much as
> M
other buttons to stop them from being pressed accidentally.
≥If you press [EXT LINK] accidentally, the unit turns off and switches
?
N to the recording standby mode. Press [EXT LINK] again to cancel
the recording standby.
≥The word “button” is not used in these operating instructions so
DVD/TV “Press the [ENTER] button.” is shown as “Press [ENTER].”
≥You can use this remote control to operate your television if you set
the television manufacturer code (➡ 23).
ENTER
RQT8033
12
EH50.book Page 13 Tuesday, July 5, 2005 11:03 AM
Main unit
1 2 3 4 5
Getting started
HDD DVD SD
OPEN/CLOSE DRIVE
SELECT REC
/k1.3
1.3
EXT LINK CH
1 Standby/on switch (Í/I) (➡ 19, 20) 9 Open/close disc tray (➡ 24, 32)
Press to switch the unit from on to standby mode or vice versa. In : Select drive (➡ 24, 32, 36)
standby mode, the unit is still consuming a small amount of Drive changes each time you press [DRIVE SELECT].
power. ; Stop (➡ 24, 33)
2 Disc tray (➡ 24, 32) < Start play (➡ 32)
3 SD card slot (➡ 6) = Start recording/Remote control signal sensor (➡ 24)
4 Lights when the HDD, DVD or SD drive is selected Specify a time to stop recording (➡ 25)
5 Display (➡ below)
6 Connection for camcorder etc. (➡ 49) Rear panel terminals (➡ 15–17)
7 Linked timer recordings with external equipment (➡ 31)
8 Channel select (➡ 24)
1 2 3 4 5 6
7 8 9
1 e.g., [HDD]
RQT8033
13
EH50.book Page 14 Tuesday, July 5, 2005 11:03 AM
STEP 1 Connection
≥The equipment connections described are examples.
≥Before connection, turn off all equipment and read the appropriate operating instructions.
≥Peripheral equipment and optional cables sold separately unless otherwise indicated.
If your television does not have one of the terminals mentioned above, connect with the RF sockets only (➡ 17). However, when using this
connection, picture received from a satellite receiver may not be clear, therefore we do not recommend it.
Q Link functions
Q Link offers a range of convenient functions (For further details ➡ 70). Make sure to connect a fully wired 21-pin Scart lead to the television if
using the Q Link functions.
The following systems from other manufacturers have similar function to Q Link from Panasonic. For details, refer to your television’s operating
instructions or consult your dealer.
≥Q Link (registered trademark of Panasonic) ≥Megalogic (registered trademark of Grundig)
≥DATA LOGIC (registered trademark of Metz) ≥SMARTLINK (registered trademark of Sony)
≥Easy Link (registered trademark of Philips)
Television Television
RQT8033
14
EH50.book Page 15 Tuesday, July 5, 2005 11:03 AM
Getting started
≥Change the “AV2 Input” setting to match the output from a satellite/digital terrestrial receiver in the SETUP menu (➡ 59) after tuning is
completed (➡ 19, 20).
≥This unit is compatible with timer recording using programme function on television (e.g., IDTVs) (➡ 31).
≥The AV2 or AV4 Scart terminals on Panasonic televisions are compatible with the Q Link functions.
AV1 terminal
Aerial ≥If your television is equipped with RGB input
lead capability, by connecting with a fully wired 21-pin
Fully wired Scart lead you can see video using RGB output
RF coaxial AC mains lead
21-pin Scart on this unit (➡ below).
lead Connect only after
≥If your television is equipped with Q Link
1 2 lead
functions, by connecting with a fully wired 21-pin
all other connections
are complete.
3 Scart lead you can use these functions (➡ 70). 4
RF OUT RF IN
L L
AV1 (TV)
Y PB PR
AUDIO
OPTICAL
R R
S VIDEO COMPONENT AC IN
AV4 IN VIDEO OUT
AV2 (DECODER/EXT) (PROGRESSIVE/ DIGITAL AUDIO OUT
AV4 IN OUT INTERLACE) (PCM/BITSTREAM)
Satellite/Digital terrestrial
DVD/VCR
receiver’s rear panel
VHF/UHF
RF IN
∫ RGB
This refers to the three primary colours of light, red (R), green (G), and blue (B) and also the method of producing video that uses them. By
dividing the video signal into the three colours for transmission, noise is reduced for even higher quality images.
RQT8033
15
EH50.book Page 16 Tuesday, July 5, 2005 11:03 AM
STEP 1 Connection
AC mains lead
RF coaxial lead Connect only after all other
1 2 connections are complete.
3 4
Audio/Video cable
Yellow Yellow
RF OUT RF IN
L L
AV1 (TV)
White White Y PB PR
AUDIO
Red Red
S VIDEO COMPONENT
OPTICAL
AC IN
R R AV4 IN VIDEO OUT
AV2 (EXT) (PROGRESSIVE/ DIGITAL AUDIO OUT
AV4 IN OUT INTERLACE) (PCM/BITSTREAM)
cable White Y PB PR
AUDIO
AUDIO
RedR R
S VIDEO
AV4 IN
COMPONENT
VIDEO OUT
OPTICAL
OPTICAL
Red R R
S VIDEO
AV4 IN
COMPONENT
VIDEO OUT
AV4 IN OUT (PROGRESSIVE/ DIGITAL AUDIO OUT
INTERLACE) (PCM/BITSTREAM)
(PROGRESSIVE/ DIGITAL AUDIO OUT
AV4 IN OUT INTERLACE) (PCM/BITSTREAM)
Getting started
indicates included accessories. BE SURE TO READ THE CAUTION FOR THE AC MAINS
indicates accessories not included. LEAD ON PAGE 2 BEFORE CONNECTION.
To the aerial
Television’s rear panel
AC mains lead
Connect only after all other
connections are complete.
2 4
RF coaxial lead Cooling fan
RF OUT RF IN
L L
AV1 (TV)
Y PB PR
AUDIO
OPTICAL
R R
S VIDEO COMPONENT AC IN
AV4 IN VIDEO OUT
AV2 (EXT) (PROGRESSIVE/ DIGITAL AUDIO OUT
AV4 IN OUT INTERLACE) (PCM/BITSTREAM)
This unit’s
rear panel
3
Aerial lead
RF coaxial lead
RF IN
Satellite/Digital terrestrial
receiver’s rear panel
RF OUT
RQT8033
17
EH50.book Page 18 Tuesday, July 5, 2005 11:03 AM
STEP 1 Connection
Red White
L L
Y PB PR
White Y PB PR
AUDIO
OPTICAL
COMPONENT
PONENT
VIDEO
O OUT
RESSIVE/ DIGITAL AUDIO OUT
(PROGRESSIVE/ R R
Red
S VIDEO
AV4 IN
COMPONENT
VIDEO OUT
OPTICAL
INTERLACE)
RLACE) (PCM/BITSTREAM) (PROGRESSIVE/ DIGITAL AUDIO OUT
AV4 IN OUT INTERLACE) (PCM/BITSTREAM)
RQT8033
18
EH50.book Page 19 Tuesday, July 5, 2005 11:03 AM
DRIVE
Press [1] and press the numbered
OPEN/CLOSE
Getting started
S VIDEO IN VIDEO IN L/MONO -AUDIO IN- R
AV3
Owner ID
X CH W
PIN number ¢¢¢¢
DVD Name
TV
Í DVD Í Í
House No.
Postcode
CH VOLUME RETURN
DIRECT TV REC
AV
RETURN : leave
HDD DVD SD
≥Make a note of the PIN number (don’t forget), as it is not
1 2 3 possible to return to the factory preset.
Numbered CH W X CH
buttons
4 5 6
VIDEO Plus+
4 Press [ENTER] twice to store the PIN
7 8 9 VIDEO Plus+
CANCEL INPUT SELECT MANUAL SKIP number.
¢ CANCEL 0
SKIP SLOW/SEARCH The cursor moves to “Name”.
PAUSE PLAY/x1.3
5 Press [1].
STOP
PROG/CHECK
6 Press [3, 4] to select a letter and
NU T OR
FUN
FUNCTIONS then press [1].
E
T
NAVIIREC
TOP M
CT
GA
IONS
D
DISPLAY
SUB MENU
㧿
CREATE
RETURN
RETURN 8 Press [4] and [1], and then repeat
AUDIO
A
STATUS CHAPTER ERASE
B C steps 6, 7 to enter and store “House
REC REC MODE EXT LINK TIMER
No.” and “Postcode”.
9 Press [RETURN].
The Owner ID settings screen disappears.
DVD/TV
To stop partway
Press [RETURN].
DownloadBroadcaster's
Checking in progress, please
data, please
wait. wait.
RETURN: to abort
RETURN
RQT8033
19
EH50.book Page 20 Tuesday, July 5, 2005 11:03 AM
(➡ 16).
≥When connecting to a television that does not have Q ∫ To confirm that stations have been tuned
Link functions (➡ 70). correctly (➡ 60)
This unit’s Auto-Setup function automatically tunes all available TV
stations and synchronizes the time when the TV channel that is ∫ To restart Auto-Setup (➡ 60)
broadcasting time and date information is tuned.
You can also use the following method to restart Auto-Setup.
≥When connecting to a television with RF socket only
When the unit is on and stopped
(➡ 17).
Press and hold [X CH] and [CH W] on the main unit for about 5
seconds.
1 Turn on the television and select the ≥All the settings except for the ratings level, ratings password,
Owner ID and time settings return to the factory preset. The timer
appropriate AV input to suit the recording programmes are also cancelled.
connections to this unit.
∫ To enter the satellite/digital terrestrial station’s
2 Press [Í DVD] to turn the unit on. name (➡ 60)
Auto-Setup starts. This takes about 5 minutes. The name of the satellite/digital terrestrial station is not set
Auto-Setup automatically. (“-- ---” will appear under “Name” in the program list.)
After Auto-Setup is completed, enter the name manually.
Ch 1
RETURN : leave
5 Press [1].
6 Press [3, 4] to select a letter and
then press [1].
Repeat this to enter the name.
To stop partway
RQT8033
Press [RETURN].
20
EH50.book Page 21 Tuesday, July 5, 2005 11:03 AM
Getting started
TV screen As the settings indicated below are dummy timer recordings,
delete them in step 6.
Preparation
Turn on the Satellite/Digital terrestrial receiver(s).
Select a correct station.
Repeat steps 1s5 above until you have set dummy timer
DVD recordings for each of the satellite stations or digital
CH : 31
terrestrial stations that you will make VIDEO Plus+ recordings
SELECT
from.
ENTER RETURN
If you can’t see the test pattern screen clearly, repeat step 1
6 Press [3] to select each programme
and 2 to select RF output channel again. that you have just set and press
4 Press [ENTER] to finish this setting. [¢ CANCEL] to delete it from the
timer recording list.
Clear picture
RQT8033
21
EH50.book Page 22 Tuesday, July 5, 2005 11:03 AM
T
NAVIIREC
TOP M
CT
GA
IONS
D
DISPLAY
ENTER
TIM
SUB MENU
㧿
RETURN
RETURN
To enjoy progressive video
CREATE
AUDIO STATUS CHAPTER ERASE
A B C You can enjoy progressive video by connecting this unit’s
REC REC MODE EXT LINK TIMER COMPONENT VIDEO OUT terminals to an LCD/plasma television
or LCD projector compatible with progressive scan (➡ 69).
DVD/TV
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4] to select “To Others”
Selecting television type and aspect and press [ENTER].
Choose the setting to suit your television and preference. 3 Press [3, 4] to select “SETUP” and
press [ENTER].
1 While stopped
Dubbing DUBBING
6 Press [3, 4] to select “Video (with
ENTER
RETURN
To Others component)” or “S Video (with
component)” and press [ENTER].
2 Press [3, 4] to select “To Others”
7 Press [3, 4] to select “Progressive”
and press [ENTER].
and press [ENTER].
3 Press [3, 4] to select “SETUP” and
8 Press [3, 4] to select “On” and
press [ENTER].
press [ENTER].
SETUP
Manual Output becomes progressive.
Auto-Setup Restart
Download from TV
Tuning
Disc
[Note]
Picture ≥When connected to a regular television (CRT: Cathode ray tube)
Sound or a multi system television using PAL mode, even if it is
Display
Connection TAB SELECT progressive compatible, progressive output can cause some
Others RETURN
flickering. Turn off “Progressive” if this occurs (➡ 39).
≥Picture will not be displayed correctly if connected to an
4 Press [3, 4] to select “Connection” incompatible television.
≥If the unit is connected to the television through VIDEO OUT, S
and press [1]. VIDEO OUT or AV1 terminal, output will be interlace irrespective
5 Press [3, 4] to select “TV Aspect” of the settings.
Getting started
1 Point the remote control at the television
close together.
Use “DVD 1”, the factory set code, under normal circumstances.
While pressing [Í TV], enter the
code with the numbered buttons.
e.g., 01: [0] ➡ [1] 1 While stopped
13/14 Picture
RQT8033
23
EH50.book Page 24 Tuesday, July 5, 2005 11:03 AM
4 5 6
buttons VIDEO Plus+
Set the “Audio Mode for XP Recording” to “LPCM” in the
7 8 9 SETUP menu (➡ 58).
CANCEL INPUT SELECT MANUAL SKIP
SKIP
0
SLOW/SEARCH
5 Press [¥ REC] to start recording.
; HDD REC PLAY
DC BS DUB EXT Link MPEG4 D.MIX NET XP DVD - AVCD
SP - + RWRAM
DVD REC PLAY LP VR
∫ STOP PAUSE PLAY/x1.3
SD PC EP SDPC
T
NAVIIREC
TOP M
CT
GA
IONS
D
DISPLAY
ENTER TOP
while paused; however, the recording will then be as a
TIM
RQT8033
Insert fully so it clicks into place.
24
EH50.book Page 25 Tuesday, July 5, 2005 11:03 AM
Recording
mode selection) maximum maximum maximum maximum
for one side ≥This does not work during timer recordings (➡ 28) or while using
§1 Flexible Recording (➡ 26).
It is not possible to record or play continuously from one side of a
double sided disc to the other. ≥If you change the channel or recording mode while recording is
§2 When “Recording time in EP mode” is set to “EP (6 Hours)” in the
paused, the time specified to stop recording is cancelled.
SETUP menu (➡ 57). ≥The unit does not turn off automatically after the time to stop
The sound quality is better when using “EP (6 Hours)” than when recording is reached.
using “EP (8 Hours)”.
To cancel
≥[RAM] When recording to DVD-RAM using “EP (8 Hours)” mode,
play may not be possible on DVD players that are compatible with Press [¥ REC] on the main unit several times until the counter
DVD-RAM. Use “EP (6 Hours)” mode if playback may be on other appears.
equipment. ≥The time to stop recording is cancelled; however, recording
continues.
FR (Flexible Recording Mode)
You can set FR (Flexible Recording) mode when transferring To stop recording partway
(dubbing) or programming timer recordings. Press [∫].
The unit automatically selects a recording rate between XP and EP
(8 Hours) that will enable the recordings to fit in the remaining disc
space with the best possible recording quality.
For example with a 90 minute recording to an unused DVD-RAM, the
picture quality is adjusted to between “XP” and “SP”. When using DVD-RW
≥When recording to the HDD, picture quality is automatically adjusted
to precisely fit a transferred (dubbed) title on a 4.7 GB disc. When you insert a new DVD-RW or a DVD-RAM/DVD-RW (DVD-
≥All the recording modes from XP to EP appear in the Video format) recorded on a computer or other equipment, a format
display. XP
SP confirmation screen is displayed. Format the disc to use it. However,
LP
EP all the recorded contents are erased.
Format
Before recording
This disc is not formatted properly.
≥It is not possible to record to both HDD (Hard Disk Drive) and DVD Format the disc in DISC MANAGEMENT?
drive simultaneously.
≥It is not possible to record continuously from one side of a double
Yes No
sided disc to the other. You will need to eject the disc and turn it
over.
≥It is not possible to record digital broadcasts that allow “One time ENTER
only recording” onto DVD-R, DVD-RW, +R or 8 cm DVD-RAM Press [2] to select “Yes” and press [ENTER].
discs. Use the HDD or CPRM compatible DVD-RAM.
≥When transferring (dubbing) in high speed mode to DVD-R, To format a disc
DVD-RW (DVD-Video format) and +R, after you have recorded to “Erasing all contents of a disc or card–Format” (➡ 53)
the HDD, set “Rec for High Speed dubbing” to “On” before
recording to the HDD (➡ 26).
Refer to the “Using DVD-R, DVD-RW and +R on this unit” for more
information (➡ 7).
RQT8033
25
EH50.book Page 26 Tuesday, July 5, 2005 11:03 AM
HDD DVD SD
Flexible Recording
OPEN/CLOSE DRIVE
SELECT
/k1.3
1.3
REC
(Recording that fits the remaining disc space)
[HDD] [RAM] [-R] [-RW‹V›] [+R]
The unit sets the best possible picture quality that fits the recording within
HDD, DVD indicator ∫ the remaining disc space. The recording mode becomes FR mode.
Í
¥ DIRECT DIRECT TV REC
CH VOLUME ∫ Using “FLEXIBLE REC” is convenient in these
AV
TV REC kinds of situations.
HDD DVD SD HDD, DVD [RAM] [-R] [-RW‹V›] [+R]
≥When the amount of free space on the disc makes selecting an
1 2 3
CH
appropriate recording mode difficult
Numbered ≥When you want to record a long programme with the best picture quality possible
4 5 6
buttons
7 8 9
VIDEO Plus+
[HDD]
CANCEL INPUT SELECT MANUAL SKIP ≥When you want to record a title to HDD so that it can then be
0 INPUT SELECT transferred (dubbed) to fit one 4.7 GB disc perfectly
SKIP SLOW/SEARCH
≥You do not need to edit the recorded title, or change the recording
; mode when transferring (dubbing), to fit the disc space.
Recording
T
NAVIIREC
TOP M
CT
GA
3,4,2,1
D
ENTER ENTER
first 60 minutes will fit on the disc
E SLIP
DISPLAY
TOP
4.7GB 4.7GB and the 30 minute balance will not
TIM
DVD-RAM DVD-RAM
get recorded.
TIME SLIP ≥Another disc is necessary.
SUB MENU RETURN
㧿 RETURN
STATUS CREATE
AUDIO STATUS CHAPTER ERASE If you select SP mode, the programme will fit one disc.
A B C
REC REC MODE EXT LINK TIMER However there will be 30 minutes
¥ REC F TIMER remaining disc space.
REC MODE
4.7GB
DVD-RAM
1 While stopped
3 Press [3, 4] to select “FLEXIBLE
Press [FUNCTIONS]. REC” and press [ENTER].
2 Press [3, 4] to select “To Others” and press FLEXIBLE REC
To stop play
Playing while you are recording Press [∫].
[HDD] [RAM] To stop recording
2 seconds after play stops
Playing from the beginning of the title you are Press [∫].
recording—Chasing playback To stop timer recording
Press [F TIMER].
Press [1] (PLAY) during recording. ≥You can also press and hold [∫] on the main unit for more than 3
≥There is no sound output while searching forward or backward. seconds to stop recording.
[Note]
To stop play Chasing play can only be used with programmes of the same
Press [∫]. encoding system (PAL/NTSC).
To stop recording
2 seconds after play stops Direct TV Recording
Press [∫].
When connected to a television that has the Q Link
To stop timer recording functions using a fully wired 21-pin Scart lead.
Recording
Press [F TIMER]. This function allows you to immediately start recording the
≥You can also press and hold [∫] on the main unit for more than 3 programme that you are viewing on the TV.
seconds to stop recording.
1 Press [HDD] or [DVD] to select the
Playing a title previously recorded while recording— recording drive.
Simultaneous rec and play
The HDD or DVD indicator lights up on the unit.
≥You can also change the drive and play while recording. Press
[HDD] or [DVD]. 2 If you selected the DVD drive
To stop play
Press [∫]. Recording from digital/satellite receiver
To exit the Direct Navigator screen Preparation
Press [DIRECT NAVIGATOR]. ≥Connect a digital/satellite receiver to this unit’s input terminals
(➡ 15).
To stop recording
≥When recording bilingual programmes
After play stops [HDD] [RAM]
1 Press [DIRECT NAVIGATOR] to exit screen. When both M 1 and M 2 is selected on the connected equipment,
2 If the recording is on the other drive you can select the audio type in playback.
Press [HDD] or [DVD] to select the recording drive. [-R] [-RW‹V›] [+R]
3 Press [∫]. Select either M 1 or M 2 on the connected equipment. (Only either
To stop timer recording one type of M 1 or M 2 can be recorded.)
Press [F TIMER]. ≥When the output signal from the external equipment is NTSC,
≥You can also press and hold [∫] on the main unit for more than 3 change the “TV System” to “NTSC” in the SETUP menu (➡ 62).
seconds to stop recording. This unit cannot record to discs containing both PAL and NTSC
signals. (However, both types of programmes can be recorded
onto the HDD.)
Reviewing the recorded images while recording— ≥Press [HDD] or [DVD] to select the recording drive.
Time Slip
While recording, you can play a scene in the title being recorded or a
1 While stopped
previously recorded title. Both the images being played and recorded Press [INPUT SELECT] to select the
are shown. input channel for the equipment you
have connected.
1 Press [TIME SLIP] during recording. e.g., If you have connected to AV2 input terminals, select “AV2”.
PLAY
0 min
Play starts from 30
2 Press [REC MODE] to select the
seconds previous. recording mode.
REC
The image currently being 3 Select the channel on the other
recorded
equipment.
≥You will hear the playback audio. 4 Press [¥ REC].
2 Press [3, 4] to select the time and Recording starts.
RQT8033
27
EH50.book Page 28 Tuesday, July 5, 2005 11:03 AM
Timer recording
OPEN/CLOSE DRIVE
SELECT REC
/k1.3
1.3
7 8 9 VIDEO Plus+
CANCEL INPUT SELECT MANUAL SKIP
¢ CANCEL 0
SKIP SLOW/SEARCH Enter PlusCode Number by using 0-9 keys.
T
Press [2] to move back to correct a digit.
NAVIIREC
TOP M
CT
GA
IONS
3,4,2,1
D
DISPLAY
TIM
5 Press [F TIMER].
The unit turns off and “F” lights on the unit’s display to
indicate timer recording standby has been activated.
≥If you turn on the unit, a
Timer standby is active. Playback is possible.
message screen appears.
Recording is not possible
while timer recording is in standby. [Playback is possible
however you cannot play a title recorded using a different
encoding system (PAL or NTSC) from that of the TV system
currently selected on the unit.]
RQT8033
28
EH50.book Page 29 Tuesday, July 5, 2005 11:03 AM
Recording
≥Timer recordings begin when the set time is reached even
when playing.
≥Timer recordings do not begin while editing or transferring
(dubbing) in normal speed mode (➡ 45).
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off
automatically. You can turn the unit off during timer recording.
≥“F” flashes for about 5 seconds when the unit cannot go to
timer recording standby.
≥If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording
starting time, the “F” flashes on the unit display. In this case,
press [F TIMER] to put the unit in the timer recording standby
mode.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the beginning of the later programmes [a few seconds when
recording with HDD or DVD-RAM and approximately 30
seconds when recording with DVD-R, DVD-RW (DVD-Video
format) and +R].
Programme Programme
Not recorded
Recorded Recorded
∫ Relief Recording
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the “HDD”.
If there is no disc in the tray or the disc cannot be recorded on or
when timer recording starts while transferring (dubbing), the
recording drive will be altered to the HDD.
≥The Direct Navigator shows which programmes were relief-
recorded (“ ” is displayed.) (➡ 32).
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
≥Relief recording is not activated when recording the programme
with PDC and it is extended so that it no longer fits on the disc.
RQT8033
29
EH50.book Page 30 Tuesday, July 5, 2005 11:03 AM
Timer recording
HDD
TIMER Remain HDD 30:24 SP DVD 1:58 SP Name Date Start Stop DVD Mode PDC RENEW
RECORDING 12:56:00 15/ 7 TUE
1 BBC 15/ 7 TUE 22:00 22:30 HDD SP OFF ON
HDD Disc
No. Name Date Start Stop DVD Mode PDC space
01 BBC 15/ 7 TUE 19:00 20:00 SP OFF OK Programme Name
02 BBC 15/ 7 TUE 22:00 22:30 SP OFF OK Check to make sure “OK”
New Timer Programme
is displayed (➡ 31).
Repeat steps 2–4 to programme other recordings. [Note]
5 Press [F TIMER]. ≥If a programme set for Auto Renewal Recording is protected or
while play back is taking place from the HDD, or while transferring
The unit turns off and “F” lights on the unit’s display to (dubbing), the programme will not be overwritten. Instead the
indicate timer recording standby has been activated. programme set for recording will be saved as a separate
≥If you turn on the unit, a programme, and this programme will be the one to be overwritten
Timer standby is active. Playback is possible.
message screen appears. when the next Auto Renewal Recording takes place.
Recording is not possible ≥Playlists made from programmes that were set for Auto Renewal
while timer recording is in standby. [Playback is possible Recording are erased along with auto renewal.
however you cannot play a title recorded using a different ≥When there is not enough space on the HDD, the programme may
RQT8033 encoding system (PAL or NTSC) from that of the TV system not be recorded completely.
currently selected on the unit.]
30
EH50.book Page 31 Tuesday, July 5, 2005 11:03 AM
Recording
Press [∫].
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK]. [Note]
≥When this unit is in timer recording standby or EXT LINK standby
Press [PROG/CHECK]. (“F” or “EXT Link” is shown on the unit’s display), recording from
television does not start.
Icons ≥Programmes are recorded as one title on this unit when the end
[ This programme is currently recording. time of the earlier timer recording and the start time of the later
W The times overlap those in another programme. timer recording are close to each other. To divide the titles, go to
Recording of the programme with the later start time “Divide Title” (➡ 41).
starts when the earlier programme finishes recording.
F The disc was full so the programme failed to record. Linked timer recordings with external
The material was copy-protected so it was not recorded. equipment (SKY Digital STB/digital
X The programme did not complete recording because the terrestrial receiver) — EXT LINK
disc is dirty or some other reason.
[HDD] [RAM] [-R] [-RW‹V›] [+R]
Timer programmes set to Auto Renewal Recording (➡ 30). To record programmes from a SKY Digital STB/digital terrestrial
Titles that have been rerouted to the HDD receiver using timer programming.
(Displayed while recording.) Preparation
Recording drive: HDD ≥Make sure you connect the AV2 input terminal of this unit to “VCR
Scart terminal” of a Sky Digital STB/digital terrestrial receiver with
Recording drive: DVD a 21-pin Scart lead (➡ 15).
≥Change the “AV2 Input” in the SETUP menu to match the
connected equipment (➡ 59).
TIMER Remain HDD 30:24 SP DVD 1:58 SP ≥Change the “Ext Link” in the SETUP menu to match the connected
RECORDING 12:56:00 15/ 7 TUE equipment (➡ 59).
HDD Disc
No. Name Date Start Stop DVD Mode PDC space Ext Link 1: Start and stop timings of recording are controlled by the
New Timer Programme
control signal from the SKY Digital STB/digital
terrestrial receiver using the “SKY Personal Planner”
function.
Ext Link 2: When external equipment with a timer function turns
on, recording starts.
Press ENTER to store new programme.
When it turns off, recording stops.
ENTER
RETURN
1 Make timer programming on SKY Digital STB/
Message displayed in the “Disc space” line digital terrestrial receiver.
2 Press [HDD] or [DVD] to select the recording drive.
OK: Displayed if the recording can fit in the If you selected the DVD drive, insert a disc (➡ 24).
remaining space.
3 Press [EXT LINK].
> (Date): For recordings made daily or weekly, the display
will show until when recordings can be made (up The unit turns off and “EXT Link” lights on the unit’s display to
to a maximum of one month from the present indicate timer recording standby has been activated.
time) based on the time remaining on the disc. [Note]
!: It may not be possible to record because: It is not possible to use EXT LINK function for timer recording of
≥there is not enough space left RGB signals from Sky Digital STB (➡ left, To record programmes
≥the number of possible titles has reached its from satellite receiver by RGB signals).
maximum.
Relief: Timer programmes that will be relief recorded to To cancel the external control
the HDD. Press [EXT LINK] to stop recording or to cancel linked timer
recording standby.
≥In order to prevent accidental operation, press [EXT LINK] to
∫ To change a programme cancel the setting after recording is finished.
Press [3, 4] to select the programme and press [ENTER]. (➡ 30, step 3)
[Note]
∫ To delete a programme ≥This function does not work with some equipment. Refer to the
Press [3, 4] to select the programme and press [¢ CANCEL]. equipment’s operating instructions.
≥The beginnings of recordings may not be recorded correctly in some cases.
∫ To exit the timer recording list ≥When “Ext Link” is set to “Ext Link 2”, this function does not work if
Press [PROG/CHECK]. the input signal is NTSC system.
≥Programmes are recorded as one title on this unit when the end
∫ To put the unit on timer recording standby time of the earlier timer recording and the start time of the later
Press [F TIMER]. timer recording are close to each other. To divide the titles, go to
“F” lights on the unit’s display to indicate timer recording standby has been activated. “Divide Title” (➡ 41).
≥While the unit is in EXT LINK standby mode or recording, video picture
≥Programmes that failed to record are deleted from the timer is from AV2 input terminal irrespective of “AV1 Output” setting (➡ 59). RQT8033
recording list at 4 a.m. two days later. ≥During EXT LINK standby mode or recording, playback is only
available from the drive performing the recording. 31
EH50.book Page 32 Tuesday, July 5, 2005 11:03 AM
Í Í
ENTER
RETURN
S SUB MENU Select Previous Next
ENTER
RETURN
S SUB MENU Select
CH VOLUME
DIRECT TV REC
AV Switching the Direct Navigator appearance
1 Press [SUB MENU] while Thumbnail Display is displayed.
HDD DVD SD 1 2 Press [3, 4] to select “Table Display” and press [ENTER].
1 2 3 ≥The display appearance last used is saved even after the unit is
Numbered CH W X CH turned off.
4 5 6
buttons
7 8 9
VIDEO Plus+
2 [HDD] [RAM]
CANCEL
0
INPUT SELECT MANUAL SKIP
MANUAL SKIP
Press [A] to select “VIDEO”.
SKIP SLOW/SEARCH DIRECT NAVIGATOR TITLE VIEW
:, 9 6, 5
VIDEO PICTURE
A B
HDD
007 008 ---
DIRECT
; This function is convenient when searching for one title to
NAVIGATOR, PROG/CHECK
TOP MENU NU T OR
FUN
playback from many titles.
E
T
NAVIIREC
TOP M
CT
GA
DISPLAY
TOP
TIME SLIP 3,4,2,1 3Press [3, 4] to select the item and press [ENTER].
TIM
DVD/TV
3 Press [3, 4, 2, 1] to select the title and press
Preparation [ENTER].
≥Turn on the television and select the appropriate video input to suit You can also select titles with the numbered buttons.
the connections to this unit. e.g., [HDD] [RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
≥Turn on this unit.
5: [0] ➡ [0] ➡ [5] 5: [0] ➡ [5]
playback drive.
The HDD or DVD indicator lights up on the unit. To show other pages
≥It is possible to watch playback from one drive while Press [3, 4, 2, 1] to select “Previous” or “Next” and press
recording on another (editing is not possible). [ENTER]. (Thumbnail Display only)
≥You can also press [:, 9] to show other pages.
2 If you selected the DVD drive
RQT8033 ≥When using cartridge discs with the write-protect tab in the
protect position (➡ 52), play automatically starts when
32 inserted in the unit.
EH50.book Page 33 Tuesday, July 5, 2005 11:03 AM
Playing back
Press [1] (PLAY) to restart from this position.
Stopped position
≥If [∫] is pressed several times, the indicator on the right disappears and the position is cleared.
≥The position is cleared if the unit is turned off or the tray is opened.
Pause Press [;].
Press [;] again or [1] (PLAY) to restart play.
Search Press [6] or [5].
≥The speed increases up to 5 steps.
≥You can also turn the Smart Wheel left or right for operation (excluding [CD] [VCD]).
≥Press [1] (PLAY) to restart play.
≥Audio is heard during first level search forward.
[DVD-A] (excluding moving picture parts) [CD] Audio is heard during all levels of search.
≥Depending on the disc, Search may not be possible.
Skip During play or while paused, press [:] or [9].
Skip to the title, chapter or track you want to play.
≥Each press increases the number of skips.
Starting from a selected Press the numbered buttons.
Play starts from the selected title, chapter or track.
title
[HDD] [CD] (discs with MP3 files and JPEG/TIFF)
e.g., 5: [0] ➡ [0] ➡ [5]
15: [0] ➡ [1] ➡ [5]
[DVD-A] Selecting groups
While stopped (screen saver is displayed on the television ➡ right)
Input a 1-digit number
e.g., 5: [5]
Other discs (You can select a track with DVD Audio.)
Input a 2-digit number
e.g., 5: [0] ➡ [5]
15: [1] ➡ [5]
≥This works only when stopped (screen saver is displayed on the television ➡ above) with some discs.
≥[VCD] (with playback control)
If you press the numbered buttons while stopped (the above screen saver is displayed on the
television) you can cancel PBC. (Elapsed play time appears on the unit’s display.)
Quick View Press and hold [1] (PLAY/a1.3).
[HDD] [RAM] Play speed is quicker than normal.
≥Press again to return to normal speed.
Slow-motion While paused, press [6] or [5].
[HDD] [RAM] [-R] [-RW‹V›] [+R] [DVD-V] The speed increases up to 5 steps.
[DVD-A] (Motion picture parts only) ≥You can also turn the Smart Wheel left or right for operation (excluding [VCD]).
[-RW‹VR›] [VCD] ≥Press [1] (PLAY) to restart play.
≥[VCD] Forward direction [5] only.
≥The unit will pause if slow-motion play is continued for approximately 5 minutes (excluding [DVD-V]
[DVD-A] [VCD]).
Frame-by-frame While paused, press [2] (2;) or [1] (;1).
[HDD] [RAM] [-R] [-RW‹V›] [+R] [DVD-V] Each press shows the next frame.
[DVD-A] (Motion picture parts only) ≥Press and hold to change in succession forward or backward.
[-RW‹VR›] [VCD] ≥Press [1] (PLAY) to restart play.
≥[VCD] Forward direction [1] (;1) only.
(Continued on the next page) RQT8033
33
EH50.book Page 34 Tuesday, July 5, 2005 11:03 AM
Press [AUDIO].
[HDD] [RAM] [-RW‹VR›] [VCD] [DVD-V] [DVD-A]
LR>L>R You can change the audio channel number each time you press the
^---------------} button. This allows you to change things like the soundtrack
language (➡ 38, Soundtrack).
HDD Soundtrack 1 ENG Î Digital 3/2.1ch
PLAY
e.g., English is selected.
LR e.g., “L R” is selected
[Note]
You cannot change the audio type in the following cases.
≥When a DVD-R, DVD-RW (DVD-Video format) or +R disc is in the disc tray while DVD drive is selected.
≥When the recording mode is XP and “Audio Mode for XP Recording” is set to “LPCM” (➡ 58).
≥When “Rec for High Speed dubbing” is set to “On” (➡ 26).
RQT8033
34
EH50.book Page 35 Tuesday, July 5, 2005 11:03 AM
[CD]
DVD
TV Preparation
Í Í Press [DVD] to select the DVD drive.
CH VOLUME
DIRECT TV REC
AV
This unit plays MP3 files recorded on CD-R/RW designed for audio
HDD DVD SD DVD recording that are finalized (➡ 69) on a computer.
1 2 3 The screen shown below is displayed when you insert a disc
Numbered CH
containing MP3 files and still pictures (JPEG/TIFF).
4 5 6
buttons VIDEO Plus+
7 8 9
CANCEL INPUT SELECT MANUAL SKIP Playback mode is set to MP3.
0 Select "JPEG" from MENU in FUNCTIONS
SKIP SLOW/SEARCH if you play pictures ( JPEG ).
:, 9
RETURN
STOP PAUSE PLAY/x1.3 ENTER
T
NAVIIREC
TOP M
CT
GA
IONS
1
D
3,4,2,1 ENTER
Press [TOP MENU].
E SLIP
DISPLAY
Playing back
REC REC MODE EXT LINK TIMER 3 003 Life on Jupiter
tracks in all groups 4 004 Metal Glue
No.
5 005 Paint It Yellow
0 – 9 6 006 Pyjamamama
Prev. 7 007 Shrimps from Mars
Next 8 008 Starperson
SELECT 9 009 Velvet Cuppermine
10 010 Ziggy Starfish
DVD/TV ENTER
RETURN Page 001/024
RQT8033
35
EH50.book Page 36 Tuesday, July 5, 2005 11:03 AM
T
NAVIIREC
TOP M
CT
GA
IONS
D
Playing back
DISPLAY
ENTER RETURN
2 Press [FUNCTIONS].
FUNCTIONS DVD MP3 Playback mode
CD (MP3/JPEG)
3 [HDD] [RAM]
Recording
2
1 3
TIMER RECORDING
VIDEO Plus+
RETURN
To Others
0005
0002
0006
0003
0007
0004
0008
3 Press [3, 4] to select “MENU” and
0009 ---- ---- ----
press [ENTER].
Previous Page 001/001 Next Menu
ENTER
S SUB MENU Select
RETURN
Select file type.
36
EH50.book Page 37 Tuesday, July 5, 2005 11:03 AM
Playing back
Rotate 1 Press Rotate RIGHT
the disc may take time if there are a lot of sessions.
[HDD] [RAM] [SD] [CD] [SUB MENU]. Rotate LEFT ≥Operation may take time to complete when there are many files
2 Press [3, 4] to ENTER and/or folders and some files may not display or be playable.
select “Rotate RETURN
≥The display order on this unit may differ from how the order is
RIGHT” or displayed on a computer.
“Rotate LEFT” and press ≥Depending on how you create the disc (writing software), files
and folders may not play in the order you numbered them.
[ENTER].
≥This unit is not compatible with packet-write format.
≥Rotation information will not be stored.
≥File format: JPEG, TIFF (non-compressed RGB chunky format)
Zoom in 1 Press Rotate RIGHT ≥Files must have the extension “.jpg”, “.JPG”, “.tif” or “.TIF”.
Zoom out [SUB MENU]. Rotate LEFT
≥Number of pixels: 34 x 34 to 6144 x 4096
[HDD] [RAM] [SD] [CD]
2 Press [3, 4] to Zoom in
(Sub sampling is 4:2:2 or 4:2:0)
select “Zoom in” ENTER
RETURN ≥Operation may take time to complete when playing TIFF format
and press still pictures.
[ENTER]. ≥MOTION JPEG is not supported.
≥To return the picture to its original size, ≥You can play MP3 and still pictures (JPEG/TIFF) on this unit by
press [3, 4] to select “Zoom out” in step making folders as shown below. However depending on how
2 and press [ENTER]. you create the disc (writing software), play may not be in the
≥When zooming in, the picture may be cut off. order you numbered the folders.
≥The enlargement information will not be ≥English alphabet and Arabic numerals are displayed correctly.
stored. Other characters may not be displayed correctly.
≥The “Zoom in/Zoom out” function is only ≥When the highest level folders are “DCIM” folders, they are
available for still pictures smaller than displayed first on the tree.
640 a 480 pixels.
Structures of still pictures Root
Erase 1 Press [ERASE]. Files inside a folder are displayed P0000001.jpg
P0000002.jpg
[HDD] [RAM] [SD] 2 Press [2, 1] to select in the order they were updated or
001
“Erase” and press [ENTER]. taken.
P0000003.jpg
≥Once erased, the recorded contents P0000004.jpg
P0000005.jpg
are lost and cannot be restored. Make
certain before proceeding.
P0000006.jpg
P0000007.jpg
P0000008.jpg
∫ To select the still pictures in another folder P0000009.jpg
P0000010.jpg
(➡ 11, Structure of folders displayed by this unit) Order of play P0000011.jpg
P0000012.jpg
1 Press [3, 4, 2, 1] to select “Folder” and press [ENTER].
2 Press [3, 4] to select the folder and press [ENTER].
DIRECT NAVIGATOR PICTURE (JPEG) VIEW
B PICTURE \DCIM\100__DVD
SD CARD
001 100__DVD
Folder 103__DVD
002 101__DVD
0001 0002 0003 0004 003 102__DVD
004 103__DVD
T
NAVIIREC
TOP M
CT
GA
IONS
D
DISPLAY
ENTER DISPLAY
Angle§ [DVD-V] [DVD-A]
TIM
1 Press [DISPLAY]. §
With some discs, you may only be able to make changes using the
menus (➡ 33) on the disc.
Disc Soundtrack 1 Î Digital 2/0 ch
Play
Subtitle Off ≥The display changes according to the disc content. You cannot
Picture change when there is no recording.
Audio channel LR
Sound
Other Audio attribute
LPCM/PPCM/ÎDigital/DTS/MPEG: Signal type
Menu Item Setting k (kHz): Sampling frequency
≥Depending on the condition of the unit (playing, stopped, b (bit): Number of bits
etc.) and disc contents, there are some items that you ch (channel): Number of channels
cannot select or change. Language
2 Press [3, 4] to select the menu and ENG: English
FRA: French
SVE:
NOR:
Swedish
Norwegian
CHI:
KOR:
Chinese
Korean
press [1]. DEU: German DAN: Danish MAL: Malay
Repeat Play
38
EH50.book Page 39 Tuesday, July 5, 2005 11:03 AM
Select the method of conversion for progressive output to suit Recording TIMER RECORDING
RETURN
To Others
Playing back
≥Auto1 Detects 24 frame-per-second film content and HDD
Disc Remaining 30:00 SP
RETURN
To Others Return
the video content is distorted.
≥If you select “Return” and press [ENTER], you can return to
AV-in NR (Only when AV1, AV2, AV3 or AV4 is selected) the previous screen.
1–5: The higher the setting the lower the on-screen menu
moves.
RQT8033
39
EH50.book Page 40 Tuesday, July 5, 2005 11:03 AM
Editing titles/chapters
TV
CH VOLUME
DIRECT TV REC
DVD SD
1 During play or while stopped
1 2 3
Press [DIRECT NAVIGATOR].
4 5 6
CH
2 [HDD] [RAM]
7 8 9
VIDEO Plus+
Press [A] to select “VIDEO”.
CANCEL INPUT SELECT MANUAL SKIP
SKIP
0
SLOW/SEARCH
3 Press [3, 4, 2, 1] to select the title.
:, 9 ; DIRECT NAVIGATOR TITLE VIEW Title View screen
A VIDEO B PICTURE
HDD
STOP PAUSE PLAY/x1.3 1 007 008 ---
T
NAVIIREC
TOP ME
CT
GA
IONS
D
DISPLAY
ENTER
ENTER ENTER
S SUB MENU Select Previous Next
TIM
Chapter View
You can change the order of chapters and create a playlist
(➡ 42). [HDD] [RAM]
Table Display Switching the Direct Navigator
Other View appearance ➡ 32
≥Titles are divided into about 5-minute chapters after finalizing Playing still pictures (JPEG/TIFF)
(➡ 54). [-R] [-RW‹V›] [+R] ➡ 36, step 3
∫ If you select “Chapter View”
≥The maximum number of items on a disc:
[HDD]
–Titles: 500 6 Press [3, 4, 2, 1] to select the chapter.
–Chapters: Approx. 1000 per title To start play ➡ Press [ENTER].
(Depends on the state of recording.) To edit ➡ Step 7.
[RAM] [-R] [-RW‹V›] [+R]
DIRECT NAVIGATOR CHAPTER VIEW A VIDEO B PICTURE Chapter View screen
–Titles: 99 ([+R] 49 titles) HDD
008 BBC 11/10 SAT
–Chapters: Approx. 1000 ([+R] Approx. 254) 001 --- --- ---
RQT8033
40
EH50.book Page 41 Tuesday, July 5, 2005 11:03 AM
Title operations
After performing steps 1–5 (➡ 40)
Set up Protection§ If set, this will protect the title from accidental erasure.
DIRECT NAVIGATOR TITLE
Cancel Protection§ Press [2, 1] to select “Yes” and press [ENTER]. HDD
007 008
The lock symbol appears when the title is protected.
[HDD] [RAM]
BBC 10/10 FRI BBC 11/10
Partial Erase You can remove unnecessary part of the recording. DIRECT NAVIGATOR Partial Erase
A VIDEO B PICTURE
[HDD] [RAM] 1 Press [ENTER] at the start point and end point of the HDD
008 PLAY Start
ENTER
RETURN
Change Thumbnail You can change an image to be shown as the thumbnail picture in the Title DIRECT NAVIGATOR Change Thumbnail
VIDEO PICTURE
View.
A B
HDD
[HDD] [RAM] [-R] [-RW‹V›] [+R] 008 ; Change
Editing
2 Press [ENTER] when the image you want to use as a Exit
thumbnail is shown. 0:06.45
To change the thumbnail Change Start play and select the image
of a thumbnail.
0:06.45
Restart play and press [3, 4] to select “Change”, then press [ENTER] ENTER
(➡ below, For your reference) 2 Press [3, 4] to select “Exit” and press [ENTER]. Divide
Press [3, 4] to select “Preview” and press [ENTER]. (The unit plays 10 Divide
- -:- -.- -
seconds before and after the division point.)
To change the division point
Restart play and press [3, 4] to select “Divide”, then press [ENTER] at the point where you want to divide
the title.
[Note]
≥The divided titles retain the title name and CPRM property (➡ 69) of the original title.
≥Video and audio just before and after the dividing point may momentarily cut out.
§ Multiple editing is possible.
Chapter operations
After performing steps 1–7 (➡ 40)
Create Chapter Select the point where you want to start a new chapter while viewing the DIRECT NAVIGATOR Create Chapter
A VIDEO B PICTURE
title. HDD
[HDD] [RAM] 008 PLAY Create
(➡ below, For your reference) 1 Press [ENTER] at the point you want to divide.
≥Repeat this step to divide at other points. Exit
2 Press [3, 4] to select “Exit” and press [ENTER]. 0:43.21
DVD
3 Press [3, 4] to select “PLAYLISTS”
Í
TV
Í
and press [ENTER].
DIRECT TV REC
AV
CH VOLUME
4 Press [3, 4, 2, 1] to select “Create”
HDD, DVD HDD DVD SD and press [ENTER].
1 2 3 PLAYLISTS PLAYLIST VIEW
CH HDD
4 5 6 --- --- ---
VIDEO Plus+
7 8 9 Create
CANCEL INPUT SELECT MANUAL SKIP
--- --- ---
0
SKIP SLOW/SEARCH
T
NAVIIREC
TOP ME
CT
GA
IONS
3,4,2,1
D
PLAYLISTS Create
ENTER ENTER
E SLIP
DISPLAY
HDD
001 BBC 11/10 SAT
TIM
CREATE
AUDIO STATUS CHAPTER ERASE Chapters in PLAYLIST Page 001/001
A B C --- --- --- ---
RETURN
S SUB MENU Press RETURN to exit.
capacity. ≥You can also create a new chapter from the source title.
≥Editing chapters in a playlist does not modify the source titles Press [SUB MENU] to select “Create Chapter” and press
and source chapters. [ENTER] (➡ 41, Create Chapter)
≥If you exceed the maximum numbers of items for a disc, all the 001 002 --- ---
Creating playlists
--- --- --- ---
ENTER
RETURN
Press RETURN to exit.
[HDD] [RAM]
Preparation ≥Press [3] to select other source titles.
≥Turn on the television and select the appropriate Video input to suit ≥Repeat steps 6–7 to add other chapters.
the connection to this unit.
≥Turn the unit on. 8 Press [RETURN].
≥Press [HDD] or [DVD] to select the drive containing the recorded All the selected scenes become the playlist.
title to be edited.
≥[RAM] Release disc or cartridge protection (➡ 52).
≥You cannot create or edit a playlist while recording or while To return to the previous screen
transferring (dubbing). Press [RETURN].
≥Playlists must be made in accordance with the encoding system
To exit the screen
currently selected in “TV System” (➡ 62).
Press [RETURN] several times.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4] to select “To Others”
and press [ENTER].
FUNCTIONS HDD Disc Remaining 30:00 SP
HDD
42
EH50.book Page 43 Tuesday, July 5, 2005 11:03 AM
and press [ENTER]. Properties Playlist information (e.g., total time and date)
is shown.
3 Press [3, 4] to select “PLAYLISTS” [HDD] [RAM]
[-RW‹VR›]
≥Press [ENTER] to exit the screen.
and press [ENTER]. Properties
Dinosaur
playlist. ENTER
RETURN
Thumbnail
Create
[HDD] [RAM]
Editing
Copy
Refer to “Playlist
Erase Enter Name §
Multiple editing is possible.
operations”.
Properties Change Thumbnail
Edit
Chapter operations
Chapter View
[HDD] [RAM]
After performing steps 1–7 (➡ left)
≥Editing chapters in a playlist does not modify the source titles and
∫ If you select “Chapter View” source chapters.
0:10.24
RETURN
43
EH50.book Page 44 Tuesday, July 5, 2005 11:03 AM
DVD
3 Press [3, 4, 2, 1] to select the still
Í
TV
Í
picture.
VOLUME
DIRECT TV REC
CH
To show other pages
AV
Press [3, 4, 2, 1] to select “Previous” or “Next” and
HDD DVD SD HDD, DVD, press [ENTER].
SD ≥You can also press [:, 9] to show other pages.
1 2 3
CH
Multiple editing
4 5 6 Select with [3, 4, 2, 1] and press [;]. (Repeat.)
VIDEO Plus+ A check mark appears. Press [;] again to cancel.
7 8 9
CANCEL INPUT SELECT MANUAL SKIP ≥To select the still pictures in another folder (➡ 37)
0
:,9
SKIP SLOW/SEARCH
4 Press [SUB MENU], then [3, 4] to
STOP PAUSE PLAY/x1.3 ;
select the operation and press
[ENTER].
DIRECT PROG/CHECK
U FUN
NAVIGATOR T OR Erase Picture
N
T
NAVIIREC
TOP ME
CT
GA
IONS
D
Set up Protection
below
3,4,2,1 ENTER Cancel Protection
E SLIP
DISPLAY
ENTER DPOF
TIM
Set up Protection§ If set, this will protect the still picture or folder from accidental erasure.
DIRECT NAVIGATOR PIC
Cancel Protection§ Press [2, 1] to select “Yes” and press [ENTER]. SD CARD
Folder 103__
[HDD] [RAM] [SD] The lock symbol appears when the still picture or folder is protected. 0001 0002
≥Even if the protection setting is used by this unit to protect a folder, the folder may
be erased by another unit. 0005 0006
DPOF § You can select a whole folder or individual pictures for printing and specify the number of prints to be made.
[SD] Press [2, 1] to select number of print (0 to 9) and
DPOF
Set up DPOF on the picture (JPEG).
Setting on other equipment will be cancelled.
The DPOF mark appears. (This appears on the still pictures inside a folder when you make the
DPOF setting for the folder.)
To cancel the print setting
Set the number of print to “0”.
≥Print settings (DPOF) made using this unit may not be viewable on other equipment.
≥When this is set by this unit, any settings established by other units will be released.
≥Settings cannot be made for folders and files not in accordance with DCF standards or if there is no
remaining space on the card.
§
RQT8033 Multiple editing is possible.
44
EH50.book Page 45 Tuesday, July 5, 2005 11:03 AM
Normal speed mode: Select XP, SP, LP, EP or FR as the recording mode for transferring (dubbing) (➡ 25).
(Dubbing)
Transfer
∫ Approximate transferring (dubbing) times (Max. speed)
(excludes time required to write data management information)
HDD 5k high speed 8k high speed 4k high speed 8k high speed
recording compatible recording compatible recording compatible recording compatible
Recording mode Recording time DVD-RAM DVD-R DVD-RW +R
XP Approx. 12 min. Approx. 8.7 min. Approx. 15 min. Approx. 8.7 min.
SP 1 Approx. 6 min. Approx. 3.8 min. Approx. 7.5 min. Approx. 3.8 min.
LP 1 hour Approx. 3 min. Approx. 1.9 min. Approx. 3.8 min. Approx. 1.9 min.
EP (6 Hours) Approx. 2 min. Approx. 1.3 min. Approx. 2.5 min. Approx. 1.3 min.
EP (8 Hours) Approx. 1.5 min. Approx. 56 sec. Approx. 1.9 min. Approx. 56 sec.
[Note]
≥When recording or playing while transferring (dubbing), the unit may not use the maximum recording speed.
≥Depending on the condition of the disc, the unit may not transfer (dub) using the maximum speed.
Regarding high speed transfer (dubbing) to DVD-R, etc. Regarding transferring (dubbing) of digital broadcasts that
To high speed transfer (dub) titles (or playlists created from those allow “One time only recording”
titles), set “Rec for High Speed dubbing” to “On” before recording to You can transfer (dub) a recorded title to a CPRM (➡ 69) compatible
the HDD (➡ 26). DVD-RAM, however, the title is erased from the HDD.
However in the following cases, transferring (dubbing) to DVD-R, ≥Titles or playlists cannot be transferred (dubbed) from DVD-RAM to
DVD-RW(DVD-Video format) and +R using the high speed mode the HDD.
does not work. ≥Titles will not be transferred (dubbed) if they are protected (➡ 41).
≥Playlists created from titles using a variety of recording modes ≥You cannot transfer (dub) playlists created from “One time only
≥Playlists created from multiple titles using FR recording mode recording” titles.
≥Playlists mixed with a variety of audio types (Dolby Digital and ≥Titles with recording limitations and playlists cannot be registered
LPCM, etc.) on the same transferring (dubbing) list.
≥Titles that contain many erased segments
RQT8033
45
EH50.book Page 46 Tuesday, July 5, 2005 11:03 AM
DVD
4 Set the recording mode.
TV
Í ≥If you are not going to change the recording mode, press [4]
Í
DIRECT TV REC
CH VOLUME (➡ step 5).
AV 1 Press [3, 4] to select “Dubbing Mode” and press [1].
HDD DVD SD DVD 2 Press [3, 4] to select “Format” and press [ENTER].
3 Press [3, 4] to select “VIDEO” and press [ENTER].
1 2 3
Numbered CH
4 Press [3, 4] to select “Recording Mode” and press
buttons
4 5 6 [ENTER].
7 8 9
VIDEO Plus+
5 Press [3, 4] to select the mode and press [ENTER].
CANCEL INPUT SELECT MANUAL SKIP 6 Press [2] to confirm.
0
:, 9
SKIP SLOW/SEARCH
T
NAVIIREC
TOP ME
CT
GA
IONS
3,4,2,1
D
DUBBING
ENTER ENTER
E SLIP
DISPLAY
RETURN
S SUB MENU
[Note]
Titles and playlists recorded using a different encoding system (PAL ARD 10 10 FRI ARD 11 10 SAT
or NTSC) from the TV system currently selected on the unit cannot 4 Press [3, 4, 2, 1] to select the titles or playlists and
be transferred (dubbed). press [ENTER].
Preparation ≥When transferring (dubbing) to DVD-R, DVD-RW (DVD-
≥Insert a disc that you can use for recording (➡ 9). Video format) or +R using high speed mode, only items
≥Confirm that there is enough remaining disc space.
indicated with “ ” can be registered.
≥To select a multiple number of items together, press
Transferring (dubbing) using the [;] to add the check mark and press [ENTER] (➡ 47,
transferring (dubbing) list Multiple editing).
≥To show other pages (➡ 47)
(Dubbing)
1 Dubbing Direction
Source HDD ≥Selecting “Normal (Silent)” means the noise generated by
HDD > DVD
Destination DVD
this unit is less than “Maximum”, however, the time required
2 Dubbing Mode
VIDEO High Speed
for transferring (dubbing) will double (approximately).
§ Only when transferring (dubbing) to 5k high speed
3 Create List 0
transferred (dubbed). [Even if the title was not transferred Erase All:
(dubbed) to the DVD-R, DVD-RW (DVD-Video format) or +R, Erase all items registered on the transferring (dubbing) list.
the amount of remaining writable disc space becomes less.] Press [2, 1] to select “Yes” and press [ENTER].
∫ To return to the previous screen Add:
Press [RETURN]. Add new items to the transferring (dubbing) list.
Press [3, 4, 2, 1] to select the playlists and titles to be added and
∫ Recording and playing while transferring press [ENTER].
(dubbing) Erase:
You can record and play using the HDD while high speed Erase the selected items.
transferring (dubbing). Press [2, 1] to select “Yes” and press [ENTER].
Press [ENTER] to cancel the screen display. You can also erase multiple items (➡ left, Multiple editing).
≥To confirm the current progress Move:
Press [STATUS]. Move selected items or change the order of items on the transferring
[Note] (dubbing) list.
≥You cannot perform chasing play or edit etc. while transferring Press [3, 4] to select the destination and press [ENTER].
(dubbing).
≥Timer recordings executed while transferring (dubbing) are To cancel all registered transferring (dubbing) setting and lists
recorded to the HDD regardless of the recording drive settings. After performing steps 1–2 (➡ 46, left column)
≥You cannot play a playlist while transferring (dubbing) titles with 1 Press [3, 4] to select “Cancel All” and press [ENTER].
“One time only recording” restriction (➡ 45). 2 Press [2, 1] to select “Yes” and press [ENTER].
≥The settings and lists may be cancelled in the following situations.
–When a title, still picture, etc. has been recorded or erased at the
To play DVD-R, DVD-RW (DVD-Video format) and +R on other
transfer (dubbing) source
players, it is necessary to finalize them after transfer (dubbing).
–When steps have been taken, for instance, to turn off the unit,
open the tray, change the transfer (dubbing) direction, etc.
Transferring (dubbing) list icons and functions
Transferring (dubbing) list indicators
Titles and playlists that can be transferred
(dubbed) in high speed mode to DVD-R, etc.
(➡ 26)
(Dubbing)
Title or playlist contains still picture(s)
Transfer
≥Still picture(s) cannot be transferred (dubbed).
47
EH50.book Page 48 Tuesday, July 5, 2005 11:03 AM
You can transfer (dub) the content of finalized DVD-R, DVD-RW (DVD- 03 04
Chapter 3 Chapter 4
Video format) and +R etc to the HDD and re-edit.
05 06
[ENTER].
DUBBING
Cancel All
1 Dubbing Direction
DVD > HDD
2 Hour 00 Min.
2 Dubbing Mode
DVD-Video XP
Set the time a few minutes
3 Dubbing Time longer.
RQT8033
48
EH50.book Page 49 Tuesday, July 5, 2005 11:03 AM
Preparation
DVD ≥Press [HDD] or [DVD] to select the recording drive.
TV ≥When recording bilingual programmes
Í Í
CH VOLUME
[HDD] [RAM]
DIRECT TV REC
AV When both M 1 and M 2 is selected on the connected equipment,
you can select the audio type in playback.
HDD, DVD HDD DVD SD
[-R] [-RW‹V›] [+R]
1 2 3 Select either M 1 or M 2 on the connected equipment. (Only either
CH
4 5 6 one type of M 1 or M 2 can be recorded.)
VIDEO Plus+ ≥When the output signal from the external equipment is NTSC,
7 8 9
CANCEL INPUT SELECT MANUAL SKIP change the “TV System” to “NTSC” in the SETUP menu (➡ 62).
0 INPUT SELECT This unit cannot record to discs containing both PAL and NTSC
SKIP SLOW/SEARCH
signals. (However, both types of programmes can be recorded
onto the HDD.)
≥To reduce noise in input from a video cassette recorder, set “AV-in
∫ STOP PAUSE PLAY/x1.3 ;
NR” to “On” in the on-screen menu (➡ 39).
PROG/CHECK
U FUN
T OR
N
T
NAVIIREC
TOP ME
1
CT
GA
IONS
D
While stopped
ENTER
E SLIP
DISPLAY
Press [∫].
S VIDEO IN VIDEO IN L/MONO -AUDIO IN- R
AV3
(Dubbing)
S VIDEO IN VIDEO IN L/MONO - AUDIO IN - R
Transfer
Yellow White Red Almost all videos and DVD-Video on sale have been treated
to prevent illegal copying. Any software that has been so
treated cannot be recorded using this unit.
S Video Audio/Video cable ≥Using Flexible Recording (➡ 26), you can save the content of a
cable§ video cassette (approx. 1–8 hours) to a 4.7 GB disc with the best
possible quality of recording without wasting disc space.
Other video equipment
RQT8033
49
EH50.book Page 50 Tuesday, July 5, 2005 11:03 AM
DVD
5 Register still pictures for transfer
TV
Í Í (dubbing).
DIRECT TV REC
CH VOLUME
≥If you are going to transfer (dub) a registered list without
AV
making any changes to it (➡ step 6).
HDD DVD SD SD
You can register still pictures or still picture folders.
1 2 3 ≥Still pictures and folders cannot be registered on the same
Numbered CH
4 5 6 list.
buttons VIDEO Plus+
9 DUBBING
7 8
CANCEL INPUT SELECT MANUAL SKIP Cancel All Destination Capacity: 4343MB
0 1 Dubbing Direction
Picture/Folder Picture
No. Size Name of item
SKIP SLOW/SEARCH SD CARD > HDD
New item (Total=0)
:, 9 2 Dubbing Mode
PICTURE High Speed
PROG/CHECK ENTER
RETURN
S SUB MENU
U FUN
T OR
FUNCTIONS
N
T
NAVIIREC
TOP ME
CT
IONS
3,4,2,1
D
ENTER ENTER 1 Press [3, 4] to select “Create List” and press [1].
E SLIP
DISPLAY
1 While stopped
2 Dubbing Mode
3 Press [3, 4] to select “Folder” and press [ENTER].
Press [FUNCTIONS].
(Dubbing)
1 Dubbing Direction
Source SD CARD Multiple editing).
SD CARD > HDD
Destination HDD ≥To show other pages (➡ 51)
2 Dubbing Mode
PICTURE High Speed ≥To switch to another higher folder (➡ 51)
3 Create List 0
≥To edit the transferring (dubbing) list (➡ 51)
≥If you are not going to change the registered list press [4] 6 Press [2] to confirm.
several times (➡ step 6).
[ENTER].
5 Press [3, 4] to select the drive and press [ENTER].
The same drive as the transfer (dubbing) source can be
7 Press [2, 1] to select “Yes” and
selected. press [ENTER] to start transferring
6 Press [2] to confirm.
(dubbing).
4 Set the recording mode.
≥If you are not going to change the recording mode, press [4] To stop transferring (dubbing)
(➡ step 5). Press and hold [RETURN] for 3 seconds.
1 Press [3, 4] to select “Dubbing Mode” and press [1].
To return to the previous screen
2 Press [3, 4] to select “Format” and press [ENTER].
Press [RETURN].
3 Press [3, 4] to select “PICTURE” and press [ENTER].
“Recording Mode” is automatically set to “High Speed”.
RQT8033 4 Press [2] to confirm.
50
EH50.book Page 51 Tuesday, July 5, 2005 11:03 AM
(Dubbing)
Transfer
If you want to switch to another higher folder (➡ below).
2 Press [3, 4] to select the folder and press [ENTER].
DIRECT NAVIGATOR PICTURE (JPEG) VIEW
B PICTURE \DCIM\100__DVD
SD CARD
001 100__DVD
Folder 103__DVD
002 101__DVD
0001 0002 0003 0004 003 102__DVD
004 103__DVD
Press ENTER to set. ≥If the space on the destination drive runs out or the number of
folder and press [ENTER].
files/folders to be transferred (dubbed) exceeds the maximum
(➡ 37), transferring (dubbing) will stop partway through.
≥When a name has not been input for the transfer (dubbing)
source folder, it is possible that this folder’s name will not be the
same on the transfer (dubbing) destination. It is recommended
that you input a folder name before transferring (dubbing)
(➡ 44).
≥Print number setting (DPOF) is not transferred (dubbed).
≥The sequence in which the still pictures are registered on the
transfer (dubbing) list may not be the same at the transfer
(dubbing) destination. RQT8033
51
EH50.book Page 52 Tuesday, July 5, 2005 11:03 AM
7 8 9
VIDEO Plus+
4 Press [3, 4] to select “Disc
CANCEL INPUT SELECT MANUAL SKIP
0 Protection” and press [ENTER].
SKIP SLOW/SEARCH
T DVD-RAM
NAVIIREC
TOP ME
CT
GA
IONS
3,4,2,1
D
Disc Name
ENTER ENTER
E SLIP
DISPLAY
Disc Protection On
TIM
SELECT
Erase all titles
SUB MENU RETURN
㧿 RETURN ENTER
RETURN
Format Disc
CREATE
AUDIO STATUS CHAPTER ERASE
A B C
REC REC MODE EXT LINK TIMER
The lock symbol appears closed when the disc is write-
protected.
LOCK
and press [ENTER].
FUNCTIONS DVD Cartridge Protection Off
DVD-RAM Disc Protection Off
Dubbing DUBBING
functions
ENTER
To Others Return
RETURN
Preparation
≥Press [DVD] to select the DVD drive.
3 Press [3, 4] to select “DISC ≥[RAM] Release protection (➡ above).
MANAGEMENT” or “CARD After performing steps 1–3 (➡ left)
MANAGEMENT” and press [ENTER].
e.g., [RAM] 4 Press [3, 4] to select “Disc Name”
DISC
MANAGEMENT Title No. 11
Used 0 : 22
Remain 5:38 (EP) and press [ENTER].
DVD-RAM
RQT8033
52
EH50.book Page 53 Tuesday, July 5, 2005 11:03 AM
Erasing all titles and playlists—Erase Erasing all the contents of a disc or
all titles card—Format
[HDD] [RAM] [HDD] [RAM] [-RW‹V›] [-RW‹VR›] [SD]
Preparation Preparation
≥Press [HDD] or [DVD] to select the drive. ≥Press [HDD], [DVD] or [SD] to select the drive.
≥Release protection (➡ 52). ≥Release protection (➡ 52).
7 Press [ENTER].
[Note]
≥When a disc or card has been formatted using this unit, it may not
be possible to use it on any other equipment.
≥Formatting cannot be performed on DVD-R, +R or CD-R/RW.
≥You can format DVD-RW only as DVD-Video format on this unit.
RQT8033
53
EH50.book Page 54 Tuesday, July 5, 2005 11:03 AM
of recording.
∫ Top Menu ≥There is a pause of several seconds between titles and
You can select the background that will be displayed as the DVD- chapters during play.
Video top menu after finalizing.
Before After
4 Press [3, 4] to select “Top Menu” finalizing finalizing
1 2 3
≥You cannot finalize discs recorded on other manufacturer’s
equipment.
Display after finalizing
4 5 6 ≥If you finalize discs recorded on Panasonic equipment other than
Thumbnail 01
this unit, the background selected as “Top Menu” may not be
(Still picture)
7 8 9
displayed.
Title Name ≥Discs finalized on this unit may not be playable on other players
due to the condition of the recording.
≥You can change thumbnails displayed in the top menu. (➡ 41,
Change Thumbnail)
∫ Auto-Play Select
You can select whether to show the top menu after finalizing.
≥Visit Panasonic’s homepage for more information about DVDs.
http://www.panasonic-europe.com
6 Press [3, 4] to select “Auto-Play
To return to the previous screen
Select” and press [ENTER]. Press [RETURN].
7 Press [3, 4] to select “Top Menu” or To exit the screen
“Title 1” and press [ENTER]. Press [RETURN] several times.
Top Menu: The top menu appears first.
Title 1: The disc content is played without displaying the
top menu.
Convenient
∫ Finalize
functions
11 Press [ENTER].
[Note]
When finalizing a high-speed recording compatible disc, it may take
RQT8033 longer than displayed on the confirmation screen (approximately four
times).
54
EH50.book Page 55 Tuesday, July 5, 2005 11:03 AM
TV
Entering text CH VOLUME
DIRECT TV REC
AV
HDD DVD SD
1 2 3
2 Press [3, 4, 2, 1] to select a
Numbered CH
character and press [ENTER].
4 5 6
buttons VIDEO Plus+
7 8 9 Repeat this step to enter other characters.
CANCEL INPUT SELECT MANUAL SKIP
¢ CANCEL 0
≥To erase a character
SKIP SLOW/SEARCH
T
NAVIIREC
TOP ME
CT
GA
3,4,2,1 5 J
IONS
DISPLAY
7 7
“R”. 6 M N O
TIM
3 Press [ENTER]. 7
SUB MENU RETURN
SUB MENU 㧿
CREATE
RETURN ≥To enter a space 7 P Q R
AUDIO STATUS CHAPTER ERASE
Press [¢ CANCEL] and press
A
REC
B C
REC MODE EXT LINK TIMER [ENTER].
8 T U V
[HDD] [RAM] [-R] [-RW‹V›] [+R] [SD] ≥Save/recall phrases (➡ below)
You can give names to recorded titles, etc.
The maximum number of characters:
3 Press [∫] (Set).
[HDD] [RAM] DVD/TV Characters “Now writing.” appears then the screen returns to the Title
view screen and so on.
Title 64 (44§)
Playlist 64 To end partway
Folder of still pictures 36 Press [RETURN].
Disc ([RAM]) 64 Text is not saved.
§
Title name for timer recording
∫ To add a name
[-R] [-RW‹V›] [+R] Characters You can add frequently used names and recall them later.
Title 44 Maximum number of added names: 20
Maximum number of characters per name: 20
Disc 40 After entering the name (step1–2).
1 Press [3, 4, 2, 1] to select “Add to List” and press
[SD] Characters
[ENTER].
Folder of still pictures 36 ≥You can also press [9] to select “Add to List”.
[Note] 2 Press [2, 1] to select “Add” and press [ENTER].
If a name is long, parts of it may not be shown in some screens. ≥Press [RETURN] to cancel.
∫ To recall an added name
1 Press [3, 4, 2, 1] to select “List Names” and press
1 Show Enter Name screen. [ENTER].
Title (timer recording) ≥You can also press [:] to select “List Names”.
Select “Programme Name” in step 3 on page 28, 30. 2 Press [3, 4, 2, 1] to select the name to be recalled and
press [ENTER].
Title ∫ To erase an added name
Select “Enter Name” in step 5 on page 40.
1 Press [3, 4, 2, 1] to select “List Names” and press
Playlist [ENTER].
Select “Enter Name” in step 5 on page 43. ≥You can also press [:] to select “List Names”.
Convenient
functions
Disc 2 Press [3, 4, 2, 1] to select the name to be erased.
Select “Disc Name” in step 4 of “Providing a name for a 3 Press [SUB MENU] to show “Erase Name” and press
disc” on page 52. [ENTER].
4 Press [2, 1] to select “Erase” and press [ENTER].
Folder of still pictures 5 Press [ENTER].
Select “Folder Name” in step 3 on page 44, “To edit still
picture folders”.
RQT8033
55
TV
EH50.book Page 56 Tuesday, July 5, 2005 11:03 AM
CH VOLUME
DIRECT TV REC
AV
1 2 3
CH
4 5 6
7 8 9
VIDEO Plus+
The Child Lock deactivates all buttons on the unit and remote
CANCEL INPUT SELECT MANUAL SKIP control. Use it to prevent other people from operating the unit.
0
SKIP SLOW/SEARCH
T
NAVIIREC
TOP ME
CT
GA
IONS
D
ENTER ENTER If you press a button while the Child Lock is on, “X HOLD” appears
E SLIP
DISPLAY
on the unit’s display and operation is impossible.
TIM
DVD/TV
HDD DVD SD
Common procedures
1
OPEN/CLOSE DRIVE
SELECT REC
/k1.3
1.3
While stopped
< OPEN/CLOSE ∫ Press [FUNCTIONS].
2 Press [3, 4] to select “To Others”
DVD
TV and press [ENTER].
Í Í
DIRECT TV REC
AV
CH VOLUME
3 Press [3, 4] to select “SETUP” and
HDD DVD SD press [ENTER].
Numbered
1 2 3
CH
4 Press [3, 4] to select the tab and
4 5 6
buttons VIDEO Plus+ press [1].
7 8 9
CANCEL INPUT SELECT MANUAL SKIP Tabs Menus Options
0
SKIP SLOW/SEARCH SETUP
Remote Control DVD 1
Clock
Owner ID
STOP PAUSE PLAY/x1.3 Tuning Quick Start On
Convenient
T
NAVIIREC
TOP ME
CT
GA
TAB SELECT
3,4,2,1
IONS
D
Connection
Others RETURN
ENTER ENTER
E SLIP
DISPLAY
[Note]
There may be differences in operation methods. If this happens,
follow the on-screen instructions for the operation.
RQT8033
56
EH50.book Page 57 Tuesday, July 5, 2005 11:03 AM
Summary of settings
The settings remain intact even if you switch the unit to standby.
RQT8033
57
EH50.book Page 58 Tuesday, July 5, 2005 11:03 AM
FL Display ≥Bright
Changes the brightness of the unit’s display. ≥Dim
RQT8033
58
EH50.book Page 59 Tuesday, July 5, 2005 11:03 AM
Connection TV Aspect (➡ 22) Set to match the type of television ≥16:9 ≥4:3 ≥Letterbox
Progressive (➡ 22) connected. ≥On ≥Off
This setting cannot be
made when the “AV1
Output” is set to “RGB
(without component)”
(➡ below).
TV System (➡ 62) ≥PAL ≥NTSC
AV1 Output ≥Video (with component)
Selects the output from the AV1 terminal. ≥S Video (with component)
Select “RGB (without component)” for RGB output. ≥RGB (without component)
Select “Video (with component)” or “S Video (with component)”
for component output.
AV2 Settings
Set to match the connected equipment.
≥Press [ENTER] to show the following settings.
AV2 Input ≥RGB/Video ≥RGB ≥Video ≥S Video
Set to “RGB/Video” or “RGB” when receiving or recording RGB
output from external equipment.
Ext Link ≥Ext Link 1: When a digital receiver (SKY Digital STB etc.) which
This setting cannot be made when the “TV System” is set to transmits a special control signal recordings via the
“NTSC” (➡ 62). 21-pin Scart lead is connected.
≥Ext Link 2: When external equipment with a timer function is
connected.
RQT8033
59
EH50.book Page 60 Tuesday, July 5, 2005 11:03 AM
Tuning
Press [3, 4] to select an item and press [1].
1 While stopped Pos To change the programme position in which
Press [FUNCTIONS]. the TV stations are assigned
Press [3, 4] or numbered buttons to select the
2 Press [3, 4] to select “To Others” number of the desired programme position and
press [ENTER].
and press [ENTER].
Name To enter or change the name of a TV station
3 Press [3, 4] to select “SETUP” and Press [3, 4, 2, 1] to enter station name and
press [ENTER].
press [ENTER]. If the station name needs a blank space, select
4 Press [3, 4] to select “Tuning” and
Channel
the blank between “Z” and “¢”.
To enter newly available TV stations or change
press [1]. the channel number of an already tuned TV
SETUP
station
Manual Press [3, 4] or the numbered buttons to enter
Auto-Setup Restart
Download from TV the channel number of the desired TV station.
Tuning
Disc
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press
Manual [ENTER].
You can add or delete channels, or change programme positions. NICAM To select the type of sound to be recorded
Press [3, 4] to select “Auto” and press [ENTER].
5 Press [3, 4] to select “Manual” and ≥Select “Off” if you want to record the normal
(mono) sound during a stereo, bilingual or
press [ENTER]. NICAM broadcast, or if the stereo sound is
Manual Tuning distorted due to inferior reception conditions.
Pos Name Ch Pos Name Ch Title Page To enter the Teletext title page for a channel
1 BBC1 4 11
2
3
BBC2
ITV
2
5
12
13
Entering title page number allows the unit to
4
5
CH4
CH5
8
10
14
15
automatically record programme and station
SELECT
6
7
16
17
names.
ENTER
RETURN
8
9
18
19
Press [3, 4] or numbered buttons to enter the
Delete
Add
Move 10 20 number and press [ENTER].
A B C
≥To find the correct title page for the station, refer
To delete a programme position to its Teletext TV guide.
Press [3, 4, 2, 1] to select a programme position and press [A]. ≥The unit’s clock must be set correctly.
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and press [B].
Auto-Setup Restart, Download from TV
To move a TV station to another programme position
1 Press [3, 4, 2, 1] to select a programme position and press You can restart auto channel setting if Preset Download or Auto-
[C]. Setup (➡ 19, 20) fails for some reason.
2 Press [3, 4, 2, 1] to select the new programme position to
which you want to assign the TV station and press [ENTER]. After performing steps 1–4 (➡ left)
∫ Auto-Setup Restart
Convenient
[Note]
functions
to select a NICAM
Title Page
Auto
301 ∫ Download from TV
programme position
and press [ENTER].
SELECT
RETURN
5 Press [3, 4] to select “Download
RETURN : leave
from TV” and press [ENTER].
6 Press [2, 1] to select “Yes” and
press [ENTER].
Downloading from the television starts.
RQT8033
60
EH50.book Page 61 Tuesday, July 5, 2005 11:03 AM
Clock settings
Usually, the unit’s Preset Download or Auto-Setup function (➡ 19, 20) automatically adjusts the clock to correct time. Under some reception
conditions, however, the unit cannot set the clock automatically.
In this case, follow the operation steps below to manually set the clock.
≥In the case of a power failure, the clock setting remains in memory for approximately 60 minutes.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4] to select “To Others” and press [ENTER].
3 Press [3, 4] to select “SETUP” and press [ENTER].
4 Press [3, 4] to select “Others” and press [1].
5 Press [3, 4] to select “Clock” and press [ENTER].
Clock
Time
Automatic On
Date
7 Press [2, 1] to select the item you
15 : 45 : 39 1 / 8 / 2005 want to change.
The items change as follows:
CHANGE
Automatic clock setting completed.
ENTER: access RETURN: leave Hour!#Minute!#Second!#Day!#Month!#Year
^-----------------------------------------------------------------------------------------J
ENTER
RETURN
RQT8033
61
EH50.book Page 62 Tuesday, July 5, 2005 11:03 AM
TV System
Change the setting to match the equipment you are connecting with, or to match the title when there are both PAL and NTSC titles on the HDD.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4] to select “To Others” and press [ENTER].
3 Press [3, 4] to select “SETUP” and press [ENTER].
4 Press [3, 4] to select “Connection” and press [1].
5 Press [3, 4] to select “TV System” and press [ENTER].
6 Press [3, 4] to select the TV system and press [ENTER].
SETUP TV System
PAL
Tuning NTSC
Disc
Picture
Sound
Display SELECT
Connection ENTER
RETURN
Others
[Note]
≥This unit cannot record to discs containing both PAL and NTSC signals. (However, both types of programmes can be recorded onto the HDD.)
Convenient
functions
Language code list Enter the code with the numbered buttons.
Abkhazian: 6566 Catalan: 6765 Gujarati: 7185 Lingala: 7678 Rhaeto-Romance: Tamil: 8465
Afar: 6565 Chinese: 9072 Hausa: 7265 Lithuanian: 7684 8277 Tatar: 8484
Afrikaans: 6570 Corsican: 6779 Hebrew: 7387 Macedonian: 7775 Romanian: 8279 Telugu: 8469
Albanian: 8381 Croatian: 7282 Hindi: 7273 Malagasy: 7771 Russian: 8285 Thai: 8472
Ameharic: 6577 Czech: 6783 Hungarian: 7285 Malay: 7783 Samoan: 8377 Tibetan: 6679
Arabic: 6582 Danish: 6865 Icelandic: 7383 Malayalam: 7776 Sanskrit: 8365 Tigrinya: 8473
Armenian: 7289 Dutch: 7876 Indonesian: 7378 Maltese: 7784 Scots Gaelic: 7168 Tonga: 8479
Assamese: 6583 English: 6978 Interlingua: 7365 Maori: 7773 Serbian: 8382 Turkish: 8482
Aymara: 6589 Esperanto: 6979 Irish: 7165 Marathi: 7782 Serbo-Croatian: 8372 Turkmen: 8475
Azerbaijani: 6590 Estonian: 6984 Italian: 7384 Moldavian: 7779 Shona: 8378 Twi: 8487
Bashkir: 6665 Faroese: 7079 Japanese: 7465 Mongolian: 7778 Sindhi: 8368 Ukrainian: 8575
Basque: 6985 Fiji: 7074 Javanese: 7487 Nauru: 7865 Singhalese: 8373 Urdu: 8582
Bengali; Bangla: Finnish: 7073 Kannada: 7578 Nepali: 7869 Slovak: 8375 Uzbek: 8590
6678 French: 7082 Kashmiri: 7583 Norwegian: 7879 Slovenian: 8376 Vietnamese: 8673
Bhutani: 6890 Frisian: 7089 Kazakh: 7575 Oriya: 7982 Somali: 8379 Volapük: 8679
Bihari: 6672 Galician: 7176 Kirghiz: 7589 Pashto, Pushto: 8083 Spanish: 6983 Welsh: 6789
Breton: 6682 Georgian: 7565 Korean: 7579 Persian: 7065 Sundanese: 8385 Wolof: 8779
Bulgarian: 6671 German: 6869 Kurdish: 7585 Polish: 8076 Swahili: 8387 Xhosa: 8872
Burmese: 7789 Greek: 6976 Laotian: 7679 Portuguese: 8084 Swedish: 8386 Yiddish: 7473
Byelorussian: 6669 Greenlandic: 7576 Latin: 7665 Punjabi: 8065 Tagalog: 8476 Yoruba: 8979
Cambodian: 7577 Guarani: 7178 Latvian, Lettish: 7686 Quechua: 8185 Tajik: 8471 Zulu: 9085
RQT8033
62
EH50.book Page 63 Tuesday, July 5, 2005 11:03 AM
Messages
HARD ERR ≥If there is no change after turning the unit on and off, consult the dealer where the unit was purchased. —
HDD SLP ≥In order to extend HDD life, the HDD is in SLEEP mode. Press [HDD] to activate. 4
NO READ ≥The disc is dirty or badly scratched. The unit cannot record, play, or edit. 5
≥This message may appear when the DVD-RAM lens cleaner has finished cleaning. 5
Press [< OPEN/CLOSE] on the main unit to eject the disc.
PROG FULL ≥There are already 32 timer programmes. Delete unnecessary timer programmes. 31
SELF CHECK ≥There was something unusual detected with the disc while recording, playing or transferring 65
(dubbing), there was a power failure or the AC plug was disconnected while the unit was on. The unit
is carrying out its recovery process. This process restores the unit to normal operation. The unit is
not broken. Wait until the message disappears.
≥If “Quick Start” is set to “On”, “PLEASE WAIT” is displayed while the unit is carrying out its recovery —
process. You cannot operate the unit while “PLEASE WAIT” is displayed.
Reference
UNFORMAT ≥You have inserted a DVD-RAM or a DVD-RW that is unformatted or a DVD-RW recorded on another unit. —
UNSUPPORT ≥You have inserted a disc the unit cannot play or record on. 9, 10
U59 ≥The unit is hot. —
The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan on the
rear of the unit.
U99 ≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby. Now —
press [Í/I] on the main unit again to turn the unit on.
X HOLD ≥The Child Lock function is activated. 56
Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.
H or F ≥There is something unusual. (The service number displayed after H and F depends on the unit’s condition.) —
≥Check the unit using the troubleshooting guide. If the service number does not disappear, do the following. 65–68
1. Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it.
2. Press [Í/I] to turn the power on. (The unit may be fixed.)
If the service number does not disappear despite after doing the above, request service from the
dealer. Inform the dealer of the service number when requesting service.
R: ≥The unit is showing you the remaining time on the HDD or the disc. (This does not indicate a 24
(e.g., R44:00) malfunction.) RQT8033
In the display across the letter “R” means “Remain” and the numbers mean remaining time
(hours:minutes). 63
EH50.book Page 64 Tuesday, July 5, 2005 11:03 AM
Refer to the following items if you have any doubts about unit operations.
Set up Page
What equipment is necessary to play ≥DVD-Video: 18
multi channel surround sound? You can play DVD-Video multi channel surround by digitally connecting an amplifier
equipped with a Dolby Digital, DTS or MPEG decoder.
≥DVD-Audio: —
This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.
Are the headphones and speakers ≥You cannot directly connect them to the unit. Connect through the amplifier, etc. 18
directly connected to the unit?
The television has a Scart terminal and ≥If you have a regular television (CRT: cathode ray tube) we recommend using the Scart 15, 16
component video input terminal. Which terminal. You can enjoy high-quality RGB video from this unit by connecting to an RGB
terminal should I connect with? compatible television.
If you have an LCD/plasma television or LCD projector compatible with progressive scan,
connect through the component video terminals for high-quality progressive video.
If you have a CRT television or a multi system television using PAL mode that is
compatible with progressive scan, we cannot recommend progressive output as some
flickering can occur.
Is my television progressive output ≥All Panasonic televisions that have 625 (576)/50i · 50p, 525 (480)/60i · 60p input terminals —
compatible? are compatible. Consult the manufacturer if you have another brand of television.
Disc
Can I play DVD-Video, DVD-Audio and ≥You cannot play DVD-Video if their region number does not include “2” or “ALL”. Cover
Video CDs bought in another country? Refer to the disc’s jacket for more information.
Can a DVD-Video that does not have a ≥The DVD-Video region number indicates the disc conforms to a standard. You cannot play —
region number be played? discs that do not have a region number. You also cannot play discs that do not conform to
a standard.
Please tell me about DVD-R, DVD-RW, ≥This unit records and plays DVD-R, DVD-RW (DVD-Video format) and +R, and plays 9, 10
+R and +RW compatibility with this unit. DVD-RW (DVD Video Recording format) and +RW.
≥This unit also records and plays high speed recording compatible DVD-R, DVD-RW, +R —
discs.
Please tell me about CD-R and CD-RW ≥This unit plays CD-R/CD-RW discs which have been recorded in one of the following 10, 35,
compatibility with this unit. standards: CD-DA, Video CD, MP3 and still pictures (JPEG/TIFF). Close the session or 37
finalize the disc after recording. This unit can recognize up to 99 folders (groups) and 999
files (tracks) on a disc with MP3 or still pictures (JPEG/TIFF).
≥You cannot write to a CD-R or CD-RW with this unit. —
Recording
Can I record from a commercially ≥Most commercially sold video cassettes and DVD are copy protected; therefore, recording —
purchased video cassette or DVD? is usually not possible.
Can DVD-R, DVD-RW (DVD-Video ≥You can play on compatible equipment such as DVD players after finalizing the disc on —
format) and +R recorded on this unit be this unit. However, depending on the condition of the recording, the quality of the disc and
played on other equipment? capabilities of the DVD player, play may not be possible.
Can I record digital audio signals using ≥You cannot record digital signals. The digital audio terminals on this unit are for output —
this unit? only.
Can a digital audio signal from this unit ≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio 58
be recorded to other equipment? Output” settings to the following in the SETUP menu.
–PCM Down Conversion: On
–Dolby Digital/DTS/MPEG: PCM
However, only as long as digital recording from the disc is permitted and the recording
equipment is compatible with a sampling frequency of 48 kHz.
≥You cannot record MP3 signals. —
Can I switch to bilingual broadcast ≥With HDD and DVD-RAM, you can. Just press [AUDIO]. 34
during recording? ≥With DVD-R, DVD-RW (DVD-Video format), +R you cannot. Change before recording with 58
“Bilingual Audio Selection” in the SETUP menu.
Can I high speed transfer (dub) to a ≥When using a high speed recording compatible disc, you can transfer (dub) a one hour 45
Reference
RQT8033
64
EH50.book Page 65 Tuesday, July 5, 2005 11:03 AM
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart
do not solve the problem, consult your dealer for instructions.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds. ≥Operations do not work due to a poor-quality disc. (Try again using
≥Poor reception due to atmospheric conditions. a Panasonic disc.)
≥Image disturbance during search. ≥The unit freezes due to one of its safety devices being activated.
≥Interruptions in reception due to periodic satellite broadcasting (Press and hold [Í/I] on the main unit for 10 seconds.)
breaks. ≥When the HDD has been automatically placed in the SLEEP mode
≥A sound is heard when the HDD goes into SLEEP mode, or (➡ 4), or the unit is turned on or off, there may be an unexpected
operations are slow to respond in SLEEP mode. sound. This does not indicate a problem with this unit.
Power Page
No power. ≥Insert the AC mains lead securely into a known active household mains socket. 15–17
≥Linked timer recordings with external equipment is in recording standby. Press [EXT LINK] 31
The unit does not turn on to cancel the recording standby.
pressing [Í DVD].
The unit switches to standby ≥One of the unit’s safety devices is activated. Press [Í/I] on the main unit to turn the unit on. —
mode.
Displays
The display is dim. ≥Change “FL Display” in the SETUP menu. 58
The time recorded on the disc ≥Times shown may disagree with actual times. —
and the available time shown ≥Available recording space on DVD-RW (DVD-Video format) increases only when the last —
do not add up. recorded title is erased. It does not increase if other titles are erased.
The play time shown for MP3 ≥Even if you erase recorded content from the DVD-R or +R, there is no increase in disc —
does not agree with the actual space.
time. ≥More disc space than the actual recording time is used after recording or editing the DVD-R —
or +R 200 times or more.
≥While searching, the elapsed time may not display correctly. —
The clock is not correct. ≥Under adverse reception conditions, etc., the automatic time correction function may not 61
work. In this case, “Automatic” is automatically turned to “Off”. If re-setting the Auto Clock
Setting does not work, set the time manually.
“SELF CHECK” is displayed ≥The unit is carrying out the recovery process. Do the following to eject the disc. —
and the disc cannot be 1 Press [Í/I] on the main unit to switch the unit to standby.
ejected. If the unit doesn’t switch to standby, press and hold [Í/I] on the main unit for about 10
seconds. The unit is forcibly switched to standby.
2 While the unit is off, press and hold [∫] and [CH W] on the main unit at the same time for
about 5 seconds. Remove the disc.
Status messages do not ≥Select “Automatic” in “On-Screen Messages” in the SETUP menu. 58
appear.
The grey background does not ≥Select “On” in “Grey Background” in the SETUP menu. 58
appear.
Picture does not appear ≥Timer recordings work regardless whether the unit is on or off. To confirm the timer —
during timer recording. recording is going to work properly, turn the unit on.
The 4:3 aspect ratio picture ≥Use the television to change the aspect. If your television does not have that function, set 39
expands left and right. “Progressive” in the Picture menu to “Off”.
≥Check the settings for “TV Aspect” in the SETUP menu. 22
Screen size is wrong.
There is a lot of after-image ≥Set “Playback NR” in the Picture menu to “Off”. 39
when playing video.
Reference
When playing DVD-Video ≥Set “Progressive” in the Picture menu to “Off”. This problem is caused by the editing method 39
using progressive output, one or material used on DVD-Video, but should be corrected if you use interlace output.
part of the picture
momentarily appears to be
doubled up.
There is no apparent change ≥The effect is less perceivable with some types of video. —
in picture quality when
adjusted with the Picture
menu in the on-screen menus.
The images from this unit do ≥Make sure that the television is connected to the AV1 terminal, VIDEO OUT terminal, S 15, 16
not appear on the television. VIDEO OUT terminal or COMPONENT VIDEO OUT terminals on this unit.
≥Make sure that the television’s input setting (e.g., AV 1) is correct. —
Picture is distorted. ≥Progressive output is set to on but the connected television is not progressive compatible. —
Press and hold [∫] and [1] (PLAY) on the main unit at the same time for more than 5
seconds to cancel this setting. The setting will change to interlace.
≥The unit’s “TV System” setting differs from the TV system used by the disc now playing. 62
While stopped, keep pressing [∫] and [< OPEN/CLOSE] on the main unit for 5 or more RQT8033
seconds. The system switches from PAL to NTSC or vice versa.
65
EH50.book Page 66 Tuesday, July 5, 2005 11:03 AM
Troubleshooting guide
Sound Page
No sound. ≥Check the connections and the “Digital Audio Output” settings. Check the input mode on the 15–18,
Low volume. amplifier if you have connected one. 58
Distorted sound. ≥Press [AUDIO] to select the audio. 34
Cannot hear the desired audio ≥Turn off V.S.S. in the following cases. 39
type. –When using discs that do not have surround sound effects such as Karaoke discs.
–When playing bilingual broadcast programmes.
≥The disc may have a restriction on the method of audio output. If “D.MIX” does not appear in —
the display when playing multi-channel DVD-Audio, only audio for the two front channels will
be output. Refer to the disc’s jacket. [DVD-A]
Cannot switch audio. ≥You cannot switch the audio in the following cases.
–When a DVD-R, DVD-RW (DVD-Video format) or +R disc is in the disc tray while DVD drive —
is selected.
–When the recording mode is XP and “Audio Mode for XP Recording” is set to “LPCM”. 58
–When “Rec for High Speed dubbing” is set to “On”. 26
≥When connecting an amplifier using an optical digital cable, you cannot switch the audio if 18, 58
“Dolby Digital” is set to “Bitstream”. Set “Dolby Digital” to “PCM” or connect using audio
cables.
≥There are discs for which audio cannot be changed because of how the disc was created. —
Operation
Cannot operate the television. ≥Change the manufacturer code. Some televisions cannot be operated even if you change 23
The remote control doesn’t the code.
work. ≥The remote control and main unit are using different codes. Change the code on the remote 23
control.
The unit is on but cannot be ≥Recording drive or playback drive has not been selected properly. 24, 32
operated. ≥Some operations may be prohibited by the disc. —
≥The unit is hot (“U59” appears on the display). Wait for “U59” to disappear. —
≥One of the unit’s safety devices may have been activated. —
Reset the unit as follows:
1 Press [Í/I] on the main unit to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [Í/I] on the main unit for about 10
seconds. The unit is forcibly switched to standby.
Alternatively, disconnect the AC mains lead, wait one minute, then reconnect it.
2 Press [Í/I] on the main unit to switch it on. If the unit still cannot be operated, consult the
dealer.
HDD activation is slow. ≥The HDD is in SLEEP mode. (“HDD SLP” appears in the unit’s display.) 4
Takes time to read DVD-RAM. ≥It may take time to read a disc if it is being used for the first time in this unit or it has not been —
used for a long time.
RQT8033
66
EH50.book Page 67 Tuesday, July 5, 2005 11:03 AM
Cannot record from external ≥Check that the connection is correct. 15, 16,
equipment. 49
≥Select the input channel (“AV2”, “AV3” or “AV4”) for the equipment you have connected. —
Timer recording does not work ≥The timer programme is incorrect or different timer programme times overlap. Correct the 31
properly. programme.
≥The unit is not on timer recording standby. (“F” on the unit’s display is not on.) Press 28–30
VIDEO Plus+ programming does [F TIMER].
≥Set the clock. 61
not work properly.
Timer recording does not stop ≥While using timer recording, press [F TIMER]. (“F” disappears.) 28–30
even when [∫] is pressed. ≥When using the linked timer recording with external equipment, press [EXT LINK]. (“Ext Link” 31
disappears.)
≥If you start recording immediately after turning on the unit while “Quick Start” is set to “On”, —
you cannot then stop recording for a few seconds.
The timer programme remains ≥The timer programme remains if set to daily or weekly. 30
even after recording finishes.
A part or whole of a recorded ≥If there is a power failure or the plug is disconnected from the household mains socket while —
title has been lost. recording or editing, the title may be lost or the HDD/disc may become unusable.
You will have to format the disc ([HDD] [RAM] [-RW‹V›]) or use a new disc. We cannot offer any 53
guarantee regarding lost programmes or discs.
The programme name and the ≥There was a programme change after timer recording was set but the recorded title still has —
recorded title do not match. the old programme name.
Cannot transfer (dub) to a DVD- ≥When recording to the HDD, set “Rec for High Speed dubbing” to “On” in the SETUP menu. 26
R, etc. disc using the high speed
mode.
When transferring (dubbing), it ≥Use a disc that is compatible with high speed recording. Even if the disc is high speed —
takes a long time even when recording compatible, the maximum speed may not be possible due to the condition of the
high speed mode is selected. disc.
≥It takes longer than normal to transfer (dub) many titles. —
≥You cannot high speed transfer (dub) to DVD-R, DVD-RW (DVD-Video format) and +R, titles —
longer than 6 hours when using other Panasonic DVD Recorders that are not compatible with
EP (8 Hours) mode recording.
An unusually loud sound is ≥When recording or high speed transferring (dubbing) to a DVD-R, DVD-RW (DVD-Video —
coming from the rotating DVD-R, format) and +R, the sound of the disc rotating may be louder than normal, however, this is not
etc. a problem.
Play
Reference
Play fails to start even when ≥Insert the disc correctly with the label facing up. 32
[1] (PLAY) is pressed. ≥The disc is dirty. 5
Play starts but then stops ≥You tried to play a blank disc or disc unplayable on this unit. 9, 10
immediately. ≥You tried to play a +RW that needs to finalized on the equipment used for recording. —
≥You may be able to transfer (dub) a “One time only recording” title that was recorded to DVD- —
RAM using a different Panasonic DVD Recorder to this unit’s HDD, but play is not possible
due to copyright protection.
≥When recording to DVD-RAM using “EP (8 Hours)” mode, play may not be possible on DVD 57
players that are compatible with DVD-RAM. In this case use “EP (6 Hours)” mode.
DVD-Video is not played. ≥You have set a ratings level to limit DVD-Video play. Change this setting. 57
67
EH50.book Page 68 Tuesday, July 5, 2005 11:03 AM
Troubleshooting guide
Angle cannot be changed. ≥Angles can only be changed during scenes where different angles are recorded. —
You have forgotten your ≥The ratings level returns to the factory preset. While the disc tray is open, press [DVD] then —
ratings password. press and hold [¥ REC] and [1] (PLAY) on the main unit at the same time for 5 or more
You want to cancel the ratings seconds (“INIT” will appear on the unit’s display).
level.
Quick View does not work. ≥This does not work when audio is other than Dolby Digital. —
≥This does not work when recording is in XP or FR mode. —
The resume play function ≥This function only works when the indicator on the right appears on the unit —
does not work. display. C
HDD REC PLAY
≥Memorized positions are canceled when the unit is turned off or when the DVD REC PLAY —
tray is opened. The memorized position on the playlist is also canceled SD PC
The Video CD picture does not ≥When connecting to Multi-system TV, select “NTSC” in “TV System” in the SETUP menu. 62
display properly. ≥When connecting to PAL TV, the lower part of the picture cannot be displayed correctly —
during search.
Time Slip does not work. ≥Time Slip does not work when the unit’s “TV System” settings are different from the title 62
recorded on the disc.
Edit
Cannot format. ≥The disc is dirty. Wipe with a damp cloth and then wipe dry. 5
≥You tried formatting a disc that you may not be able to use in this unit. 9
Cannot create chapters. ≥The unit writes the chapter division information to the disc when you turn it off or remove the —
disc. The information is not written if there is an interruption to the power before this.
Cannot mark the start point or ≥These operations are not possible with still pictures. —
the end point during “Partial ≥You cannot set points if they are too close to each other. You cannot set an end point before —
Erase” operation. a start point.
Cannot erase chapters. ≥When the chapter is too short to erase, use “Combine Chapters” to make the chapter 41
longer.
The available recording time ≥Available recording space on the DVD-R and +R does not increase even after erasing —
doesn’t increase even after previously recorded titles.
erasing recordings on the ≥Disc space on a DVD-RW (DVD-Video method) increases only when the last recorded title —
disc. is erased. It does not increase if other titles are erased.
Cannot create a playlist. ≥You cannot select all the chapters at once in a title if the title also includes still pictures. —
Select them individually.
Still pictures
Cannot display Direct ≥This screen cannot be displayed during recording or transfer (dubbing) or while the unit is —
Navigator screen. standing by for linked timer recording with external equipment.
Cannot edit or format a card. ≥Release the card’s protection setting. (With some cards, the “Write Protection Off” message 52
sometimes appears on the screen even when protection has been set.)
The contents of the card ≥The card format is not compatible with the unit. (The contents on the card may be damaged.) 11, 37,
cannot be read. Format using FAT 12 or FAT 16 with other equipment or format the card with this unit. 53
≥The card contains a folder structure and/or file extensions that are not compatible with this 11
unit.
≥Turn off and then turn on the unit again. —
Reference
Transferring (dubbing), erasing ≥When there are a lot of folders and files, it may sometimes take a few hours. —
and setting protection takes a ≥When repeating transferring (dubbing) or erasing, it may sometimes take a long time. Format 53
long time. the disc or card.
Glossary
erasure protection.
Folder
This is a place on the hard disk or memory card where groups of Sampling frequency
data are stored together. In the case of this unit, it refers to the place Sampling is the process of converting the heights of sound wave
where still pictures (JPEG, TIFF) are stored. (analog signal) samples taken at set periods into digits (digital
encoding). Sampling frequency is the number of samples taken per
Formatting second, so larger numbers mean more faithful reproduction of the
Formatting is the process of making media such as DVD-RAM original sound.
recordable on recording equipment.
You can format the HDD, DVD-RAM, DVD-RW (only as DVD-Video Thumbnail
format) and SD Memory Card on this unit. Formatting erases This refers to a miniature representation of a picture used to display
irrevocably all contents. multiple pictures in the form of a list.
TIFF (Tag Image File Format)
This is a system used for compressing/decoding colour still pictures,
a common format for storing high quality images on digital cameras
and other devices.
RQT8033
69
EH50.book Page 70 Tuesday, July 5, 2005 11:03 AM
Glossary
Safety precautions
Placement Foreign matter
Set the unit up on an even surface away from direct sunlight, high Do not let metal objects fall inside the unit. This can cause electric
temperatures, high humidity, and excessive vibration. These shock or malfunction.
conditions can damage the cabinet and other components, thereby Do not let liquids get into the unit. This can cause electric shock or
shortening the unit’s service life. malfunction. If this occurs, immediately disconnect the unit from the
Do not place heavy items on the unit. power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
Voltage flammable gases which can ignite if sprayed into the unit.
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Service
Do not use a DC power source. Check the source carefully when Do not attempt to repair this unit by yourself. If sound is
setting the unit up on a ship or other place where DC is used. interrupted, indicators fail to light, smoke appears, or any other
problem that is not covered in these instructions occurs, disconnect
AC mains lead protection the AC mains lead and contact your dealer or an authorized service
Reference
centre. Electric shock or damage to the unit can occur if the unit is
Ensure the AC mains lead is connected correctly and not
repaired, disassembled or reconstructed by unqualified persons.
damaged. Poor connection and lead damage can cause fire or
electric shock. Do not pull, bend, or place heavy items on the lead. Extend operating life by disconnecting the unit from the power
Grasp the plug firmly when unplugging the lead. Pulling the AC source if it is not to be used for a long time.
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
RQT8033
70
EH50.book Page 71 Tuesday, July 5, 2005 11:03 AM
Specifications
RQT8033
71
EH50.book Page 65 Tuesday, July 5, 2005 11:03 AM
Index
Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Finalize. . . . . . . . . . . . . . . . . . . . . . . 54, 69 Ratings level . . . . . . . . . . . . . . . . . . . . 57
Aspect. . . . . . . . . . . . . . . . . . . . . . . . . . 22 Flexible Recording . . . . . . . . . . . . . . . . 26 Rec for High Speed dubbing . . . . . 26, 57
Audio Format . . . . . . . . . . . . . . . . . . . . . . . 53, 69 Recording . . . . . . . . . . . . . . . . . . . . . . . 24
Attribute . . . . . . . . . . . . . . . . . . . . . . 38 FR (Flexible Recording Mode) . . . . . . . 25 Auto Renewal . . . . . . . . . . . . . . . . . . 30
Language . . . . . . . . . . . . . . . . . . . . . 38 FUNCTIONS window. . . . . . . . . . . . . . . 39 Direct TV Recording . . . . . . . . . . . . . 27
Playback . . . . . . . . . . . . . . . . . . . . . . 34 External Link. . . . . . . . . . . . . . . . . . . 31
JPEG . . . . . . . . . . . . . . . . . . . . . . . . 37, 69
Receiving . . . . . . . . . . . . . . . . . . . . . 39 Flexible Recording . . . . . . . . . . . . . . 26
Auto Renewal Recording . . . . . . . . . . 30 Language Mode. . . . . . . . . . . . . . . . . . . . . . . . . 25
Audio . . . . . . . . . . . . . . . . . . . . . . . . . 57 Relief . . . . . . . . . . . . . . . . . . . . . . . . 29
Change Thumbnail . . . . . . . . . . . . . . . 41
Code list. . . . . . . . . . . . . . . . . . . . . . . 63 Timer . . . . . . . . . . . . . . . . . . . . . 28–31
Channel
Soundtrack . . . . . . . . . . . . . . . . . 38, 57 Relief Recording . . . . . . . . . . . . . . . . . 29
Audio. . . . . . . . . . . . . . . . . . . . . . . . . 38
Subtitle. . . . . . . . . . . . . . . . . . . . . 38, 57 Remote control code . . . . . . . . . . . . . . 23
Auto-Setup . . . . . . . . . . . . . . . . . 20, 60
LPCM . . . . . . . . . . . . . . . . . . . . . . . . 58, 69 Repeat Play . . . . . . . . . . . . . . . . . . . . . 38
Preset Download . . . . . . . . . . . . 19, 60
Manual Skip. . . . . . . . . . . . . . . . . . . . . . 34 Resume play function . . . . . . . . . . . . . 33
Chapter . . . . . . . . . . . . . . . . . . . . . . 34, 40
Menu RGB
Chasing playback . . . . . . . . . . . . . . . . 27
Child Lock . . . . . . . . . . . . . . . . . . . . . . 56 MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Input . . . . . . . . . . . . . . . . . . . . . . . . . 59
Cleaning On-screen . . . . . . . . . . . . . . . . . . . . . 38 Output. . . . . . . . . . . . . . . . . . . . . 15, 59
Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SETUP. . . . . . . . . . . . . . . . . . . . . . . . 56 SD card . . . . . . . . . . . . . . . . . . . . . . . . 6, 11
Lens . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Mode SETUP menu . . . . . . . . . . . . . . . . . . . . 56
Main unit . . . . . . . . . . . . . . . . . . . . . . . 5 Recording . . . . . . . . . . . . . . . . . . . . . 25 Shipping Condition . . . . . . . . . . . . . . . 59
Clock settings . . . . . . . . . . . . . . . . . . . 61 Still Mode. . . . . . . . . . . . . . . . . . . . . . 57 Simultaneous rec and play . . . . . . . . . 27
Connection MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Soundtrack . . . . . . . . . . . . . . . . . . . . . . 38
Aerial. . . . . . . . . . . . . . . . . . . . . . 15–17 Name Status messages . . . . . . . . . . . . . . . . . 39
Amplifier, system component . . . . . . 18 Disc . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Still picture
AV3 input terminals. . . . . . . . . . . . . . 49 Entering text . . . . . . . . . . . . . . . . . . . 55 Edit . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Satellite/Digital terrestrial receiver . . . 15, 17 Folder . . . . . . . . . . . . . . . . . . . . . . . . 44 Play. . . . . . . . . . . . . . . . . . . . . . . . . . 36
Television . . . . . . . . . . . . . . . . . . . 15–17 Playlist . . . . . . . . . . . . . . . . . . . . . . . . 43 Transferring (dubbing) . . . . . . . . . . . 50
Video cassette recorder . . . . . . . 16, 49 Title . . . . . . . . . . . . . . . . . . . . 28, 30, 41 Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . 38
Copy (playlist) . . . . . . . . . . . . . . . . . . . 43 Noise reduction (NR) Teletext . . . . . . . . . . . . . . . . . . . . . . . . . 24
CPRM . . . . . . . . . . . . . . . . . . . . . . . . . . 69 AV-in NR . . . . . . . . . . . . . . . . . . . . . . 39 TIFF . . . . . . . . . . . . . . . . . . . . . . . . . 37, 69
Create Chapter . . . . . . . . . . . . . . . . 34, 41 Playback NR . . . . . . . . . . . . . . . . . . . 39 Time Slip. . . . . . . . . . . . . . . . . . . . . 27, 34
Create playlists . . . . . . . . . . . . . . . . . . 42
On-screen Timer recording . . . . . . . . . . . . . . . 28–31
Default Settings . . . . . . . . . . . . . . . . . . 59 Menus . . . . . . . . . . . . . . . . . . . . . . . . 38 Transfer . . . . . . . . . . . . . . . . . . . . . . . . 39
Dialog Enhancer . . . . . . . . . . . . . . . . . 39 Status messages . . . . . . . . . . . . . . . . 39 Transferring (dubbing)
Direct Navigator . . . . . . . . . 32, 36, 40, 44 Owner ID . . . . . . . . . . . . . . . . . . 19, 20, 59 Still picture . . . . . . . . . . . . . . . . . . . . 50
Direct TV Recording . . . . . . . . . . . . . . 27 Title/Playlist . . . . . . . . . . . . . . . . . . . 45
Divide Title . . . . . . . . . . . . . . . . . . . . . . 41 Partial Erase . . . . . . . . . . . . . . . . . . . . . 41 Tuning
DPOF. . . . . . . . . . . . . . . . . . . . . . . . 44, 69 PCM Down Conversion . . . . . . . . . . . . 58 Auto-Setup . . . . . . . . . . . . . . . . . 20, 60
DVD-RAM, DVD-R, DVD-RW, +R . . . . . . 9 PDC . . . . . . . . . . . . . . . . . . . . . . . . . 29, 70 Manual . . . . . . . . . . . . . . . . . . . . . . . 60
Picture settings. . . . . . . . . . . . . . . . 39, 57 Preset Download . . . . . . . . . . . . 19, 60
Enabling discs to be played on other Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . 42 TV System (PAL/NTSC) . . . . . . . . . . . . 62
equipment – Finalize . . . . . . . . . . . . . . 54 Playback NR . . . . . . . . . . . . . . . . . . . . . 39 TV type . . . . . . . . . . . . . . . . . . . . . . . . . 22
Erase Progressive . . . . . . . . . . . 6, 22, 39, 59, 69
All titles . . . . . . . . . . . . . . . . . . . . . . . 53 Properties VIDEO Plus+ . . . . . . . . . . . . . . . . . . . . . 28
Chapter . . . . . . . . . . . . . . . . . 34, 41, 43 Playlist . . . . . . . . . . . . . . . . . . . . . . . . 43 V.S.S. . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Folder . . . . . . . . . . . . . . . . . . . . . . . . 44 Still picture . . . . . . . . . . . . . . . . . . . . . 36
Playlist . . . . . . . . . . . . . . . . . . . . 34, 43 Title . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Still picture . . . . . . . . . . . . . . . . . . . . 44 Protection
Title . . . . . . . . . . . . . . . . . . . . . . . 34, 41 Card. . . . . . . . . . . . . . . . . . . . . . . . . . 52
Ext Link. . . . . . . . . . . . . . . . . . . . . . 31, 59 Cartridge . . . . . . . . . . . . . . . . . . . . . . 52
Disc . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Folder . . . . . . . . . . . . . . . . . . . . . . . . 44
Still picture . . . . . . . . . . . . . . . . . . . . . 44
Title . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Q Link. . . . . . . . . . . . . . . . . . . . . . . . 14, 70
Quick Start. . . . . . . . . . . . . . . . . . . . . . . 24
Quick View. . . . . . . . . . . . . . . . . . . . . . . 33
Manufactured under license from Dolby Laboratories. MPEG Layer-3 audio decoding technology licensed from
“Dolby” and the double-D symbol are trademarks of Dolby Fraunhofer IIS and Thomson multimedia.
Laboratories.
This product incorporates copyright protection technology that is
“DTS” and “DTS 2.0iDigital Out” are trademarks of Digital protected by U.S. patents and other intellectual property rights.
Theater Systems, Inc. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited
consumer uses only unless otherwise authorized by
VIDEO Plus+ and PlusCode are registered trademarks of
Macrovision. Reverse engineering or disassembly is prohibited.
Gemstar Development Corporation.
The VIDEO Plus+ system is manufactured under license from
Gemstar Development Corporation. ≥SD logo is a trademark.
≥Portions of this product are protected under copyright law and
are provided under license by ARIS/SOLANA/4C.