Professional Documents
Culture Documents
This standard describes and defines variations that may occur in unassembled wormgearing. It displays
measuring methods and practices, giving suitable warnings if a preferred probe cannot be used. The applicability
of single or double flank composite testing is discussed, using a reference gear. Tooth thickness measurement is
shown using direct measurement as well as the use of measurements over wires or pins. Equations for the
maximum variations are given for the stated ranges, as a function of size, pitch and tolerance grade. Revision of
ANSI/AGMA 2011-A98. Reaffirmed December 17, 2019.
ISBN: 1-61481-090-2 Pages 51
ANSI/AGMA 2015-2-B15 Gear Tooth Flank Tolerance Classification System – Definitions and Allowable
Values of Double Flank Radial Composite Deviations
This standard establishes a classification system for double flank radial composite tolerances—allowable values
of deviations—of individual cylindrical involute gears, sector gears, racks, cylindrical worms, worm gears and
hypoid or bevel gears. It serves as a concise means of specifying allowable gear geometry deviations and
simplifies discussions between the gear manufacturer and purchaser. It specifies the appropriate definitions of
double flank radial composite gear tooth geometry deviations, the structure of the tolerance system and the
tolerances. Revision of ANSI/AGMA 2015-2-A06.
ISBN: 1-55589-005-6 Pages: 26
ANSI/AGMA 2101-D04 Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical
Gear Teeth (Metric Edition)
Presents a comprehensive method for rating the pitting resistance and bending strength of spur and helical
involute gear pairs. Contains detailed discussions of factors influencing gear survival and calculation methods.
Revisions reflected in this version include incorporating the latest AGMA accuracy standard (ANSI/AGMA 2015-1-
A01) into the determination of dynamic factor and change to the relationship between service factor and stress
cycle factor. Revision of ANSI/AGMA 2101-C95. Reaffirmed March 2016.
ISBN: 1-55589-840-8 Pages: 56
ANSI/AGMA 2116-A05 Evaluation of Double Flank Testers for Radial Composite Measurement of Gears
This standard provides the evaluation criteria for double flank testers. Recommended artifact sizes and geometry
are provided along with measurement system conditions. Annexes contain methods for estimating calibration
uncertainty and specifying artifact. Reaffirmed February 2, 2017.
ISBN: 1-55589-871-8 Pages: 9
Obsolete documents should not be used; please use replacements. Most obsolete and superseded documents are
available for purchase. Contact AGMA Headquarters for pricing and availability.