Professional Documents
Culture Documents
S
SUUP
PPPO
ORRTT S
Seettttiinnggss
Brochure Home > Support > Settings > Simplified User Manual
SSH
HSS--PP771188
Latest Events & Promotions
M
Maasstteerr PPaassssw
woorrdd C
Chhaannggee • Press [REG] button
FAQ • Enter current master password + (*) button
• Enter new master password (4 to 12 digits) + (*)
• Re-enter new master password + (*)
Settings
U
Usseerr PPaassssw
woorrdd R
Reeggiissttrraattiioonn • Press [REG] button
Troubleshootings • Enter master password + (*) button
• Enter User ID (1~30) + (*) button
• Enter New User password (4 to 12 digits) + (*) button
• Enter another New User ID & continue same step
• Press [REG] button to quit
U
Usseerr C
Caarrdd R
Reeggiissttrraattiioonn • Press [REG] button
• Enter current master password + (*) button
• Place card at card reader panel
FFiinnggeerrpprriinntt R
Reeggiissttrraattiioonn • Press [REG] button
• Enter master password + (*) button
• Touch the fingerprint reading panel with finger when LED lights (repeat 3
times)
• Place another fingerprint for registration or press [REG] button to quit
AAccttiivvaattee // D
Deeaaccttiivvaattee W
Weellccoom
mee • Press [REG] button
FFuunnccttiioonn • Enter [1] + (*) button : Welcome function on, one minute alarm function
on
• Enter [2] + (*) button : Welcome function on, one minute alarm function
off
• Enter [3] + (*) button : Welcome function off
• Enter [5] + (*) button : Set up fingerprint authorization standby mode
• Enter [8] + (*) button : Cancel fingerprint authorization standby mode
SSeelleecctt AAuuttoom
maattiicc oorr M
Maannuuaall • Place the (AUTO / MANUAL LOCKING) toggle switch to the 'Auto' or
LLoocckkiinngg M
Mooddee 'Manual' position
VVoolluum
mee SSeettttiinnggss • Set the [Sound Volume] switch to one of followings
• 0 : Mute except for warning/ Alarm sound
• 1 ~ 2 : Sounds will get louder as the level increases
AArrm
m sseeccuurriittyy m
mooddee • Close and lock the door
• Press button
D
Diissaarrm
m sseeccuurriittyy m
mooddee 1. Enter registered password / fingerprint / card
DDoouubbllee AAuutthhoorriizzaattiioonn M
Mooddee • Press [REG] button
SSeettttiinngg • Enter master password + (*)
• Press '4' + (*) button to set up
• Press '6' + (*) button to turn off
* To activate this function, at least one fingerprint has to registered.
C
Caanncceell iinntteerrnnaall ffoorrccee lloocckk m
mooddee 1. Pull the inner body handle
D
Doooorr LLoocckk TTIIm
mee SSeettuupp 1. Enter master password + (*) button
2. Press (51) ~ (59) + (*) button
• (51) : 1 second
• (52) : 2 second
• (53) : 3 second
• (54) : 4 second
• (55) : 5 second
• (56) : 6 second
• (57) : 7 second
• (58) : 8 second
• (59) : 9 second
SSH
HSS--PP771177
M
Maasstteerr PPaassssw
woorrdd C
Chhaannggee • Press [REG] button
• Enter current master password + (*) button
• Enter new master password (4 to 12 digits) + (*)
• Re-enter new master password + (*)
U
Usseerr PPaassssw
woorrdd R
Reeggiissttrraattiioonn • Press [REG] button
• Enter master password + (*) button
• Enter User ID (1~30) + (*) button
• Enter New User password (4 to 12 digits) + (*) button
• Enter another New User ID & continue same step
• Press [REG] button to quit
U
Usseerr C
Caarrdd R
Reeggiissttrraattiioonn • Press [REG] button
• Enter current master password + (*) button
• Place card at card reader panel
D
Deelleettee U
Usseerr PPaassssw
woorrdd // C
Caarrdd • Press [REG] button for 3 seconds
• Enter master password + (*) button
• Enter User ID (1 ~ 30) + (*) button or place card at card reader panel to
delete user individually
• Continue with another User ID/Card to be deleted + (*) button
• Enter "88" + (*) button to delete all PIN/Cards
• Enter "77" + (*) button to delete all fingerprint PIN/Card
• Press [REG] button to quit
AAccttiivvaattee // D
Deeaaccttiivvaattee W
Weellccoom
mee • Press [REG] button
FFuunnccttiioonn • Enter [1] + (*) button : Welcome function on, one minute alarm function
on
• Enter [2] + (*) button : Welcome function on, one minute alarm function
off
• Enter [3] + (*) button : Welcome function off
SSeelleecctt AAuuttoom
maattiicc oorr M
Maannuuaall • Place the (AUTO / MANUAL LOCKING) toggle switch to the 'Auto' or
LLoocckkiinngg M
Mooddee 'Manual' position
VVoolluum
mee SSeettttiinnggss • Set the [Sound Volume] switch to one of followings
• 0 : Mute except for warning/ Alarm sound
• 1 ~ 2 : Sounds will get louder as the level increases
AArrm
m sseeccuurriittyy m
mooddee • Close and lock the door
• Press button
D
Diissaarrm
m sseeccuurriittyy m
mooddee 1. Enter registered password / fingerprint / card
DDoouubbllee AAuutthhoorriizzaattiioonn M
Mooddee • Press [REG] button
SSeettttiinngg • Enter master password + (*)
• Press '4' + (*) button to set up
• Press '6' + (*) button to turn off
* To activate this function, at least one fingerprint has to registered.
C
Caanncceell iinntteerrnnaall ffoorrccee lloocckk m
mooddee 1. Pull the inner body handle
D
Doooorr LLoocckk TTIIm
mee SSeettuupp 1. Enter master password + (*) button
2. Press (51) ~ (59) + (*) button
• (51) : 1 second
• (52) : 2 second
• (53) : 3 second
• (54) : 4 second
• (55) : 5 second
• (56) : 6 second
• (57) : 7 second
• (58) : 8 second
• (59) : 9 second
SSH
HSS--H
H770055 ((SSH
HSS--55223300))
M
Maasstteerr PPaassssw
woorrdd C
Chhaannggee • Press [REG] button
• Enter master password + (*) button
• Press '1' + (*) button
• Enter new master password + (*)
U
Usseerr PPaassssw
woorrdd R
Reeggiissttrraattiioonn • Press [REG] button
• Enter master password + (*) button
• Press '4' + (*) button
• Enter User ID (0~9) + (*) button
• Enter User password + (*) button
U
Usseerr PPaassssw
woorrdd C
Chhaannggee// D
Deelleettee • Press [REG] button
• Enter master password + (*) button
• Press '5' + (*) button + User ID (0~9) to delete user individually
• Press '6 + (*) button to delete all users
FFiinnggeerrpprriinntt R
Reeggiissttrraattiioonn • Press [REG] button
• Enter master password + (*) button
• Press '7' + (*) button
• Enter fingerprint
• Enter another fingerprint for registration or press (*) button to quit
FFiinnggeerrpprriinntt D
Deelleettee • Press [REG] button
• Enter master password + (*)
• Press '8' + (*) button + fingerprint to delete individually
• Press '9' + (*) button to delete all fingerprints
R
Reeggiisstteerr rreem
moottee ccoonnttrroolllleerr 1. Press [REG] button for 3 seconds
2. Enter password + (*) button
3. Press & hold for 3 seconds or longer the [OPEN] button of the remote
controller to be registered
D
Deelleettee rreem
moottee ccoonnttrroolllleerr • Press [REMOTE] button for 5 seconds
• Enter password + (*) button
SSeelleecctt AAuuttoom
maattiicc oorr M
Maannuuaall • Place the (AUTO / MANUAL LOCKING) toggle switch to the 'Auto' or
LLoocckkiinngg M
Mooddee 'Manual' position
VVoolluum
mee SSeettttiinnggss • Set the [Sound Volume] switch to one of followings
• 0 : Mute except for warning/ Alarm sound
• 1 ~ 2 : Sounds will get louder as the level increases
AArrm
m sseeccuurriittyy m
mooddee • Close and lock the door
• Press button
D
Diissaarrm
m sseeccuurriittyy m
mooddee 1. Enter password
2. Place fingerprint
D
Doouubbllee AAuutthhoorriizzaattiioonn • Press [REG] button
• Enter master password + (*)
• Press '0' + (*) button
1. Press '4' + (*) button to set up
2. Press '6' + (*) button to turn off
C
Caanncceell iinntteerrnnaall ffoorrccee lloocckk m
mooddee 1. Turn the manual knob counter clock wise
2. Pull down handle bar
SSH
HSS--H
H663355 ((SSH
HSS--66002200))
U
Usseerr PPaassssw
woorrdd C
Chhaannggee// D
Deelleettee • Press [REG] button
• Enter password + (*) button
• Enter new password + (*) button
• Reenter new password + (*) button
FFiinnggeerrpprriinntt// C
Caarrdd oorr kkeeyy ttaagg // • Press [REG] button
TToouucchh KKeeyy R Reeggiissttrraattiioonn • Enter password + (*) button
• Press card or key tag
• Place another card or key tag for registration
FFiinnggeerrpprriinntt// C
Caarrdd oorr kkeeyy ttaagg // • Press [REG] button for 3 seconds
TToouucchh KKeeyy D Deelleettee • Enter password + (*) button
• All cards or key tags will be deleted
R
Reeggiisstteerr rreem
moottee ccoonnttrroolllleerr 1. Press [REG] button for 3 seconds
2. Enter password + (*) button
3. Press & hold for 3 seconds or longer the [OPEN] button of the remote
controller to be registered
D
Deelleettee rreem
moottee ccoonnttrroolllleerr • Press [REMOTE] button for 5 seconds
• Enter password + (*) button
SSeelleecctt AAuuttoom
maattiicc oorr M
Maannuuaall • Place the (AUTO / MANUAL LOCKING) toggle switch to the 'Auto' or
LLoocckkiinngg M
Mooddee 'Manual' position
VVoolluum
mee SSeettttiinnggss • Set the [Sound Volume] switch to one of followings
• 0 : Mute except for warning/ Alarm sound
• 1 ~ 2 : Sounds will get louder as the level increases
AArrm
m sseeccuurriittyy m
mooddee • Press the [ENTER NUMBER] button after locking the door
• Hold (#) button for 3 seconds
• Enter password + (*) button
D
Diissaarrm
m sseeccuurriittyy m
mooddee 1. Enter password+ (*) button
2. Place card or key tag / touch key
C
Caanncceell iinntteerrnnaall ffoorrccee lloocckk m
mooddee 1. Turn the manual knob counter clock wise
2. Pull down handle bar
SSH
HSS--H
H550055 ((SSH
HSS--55005500))
U
Usseerr PPaassssw
woorrdd C
Chhaannggee// D
Deelleettee • Press [REG] button
• Enter current password + (*) button
• Enter new password + (*) button
• Reenter new password + (*) button
FFiinnggeerrpprriinntt// C
Caarrdd oorr kkeeyy ttaagg // • Press [REG] button
TToouucchh KKeeyy R Reeggiissttrraattiioonn • Enter current password + (*) button
• Placing the card or key tag on card reader
• To register multiple card/ key tag: lightly place another card or key tag to
card reader within 20 seconds after registration previous card/ key tag
FFiinnggeerrpprriinntt// C
Caarrdd oorr kkeeyy ttaagg // • Press [REG] button for 3 seconds
TToouucchh KKeeyy D Deelleettee • Enter current password + (*) button
• All cards or key tags will be deleted
R
Reeggiisstteerr rreem
moottee ccoonnttrroolllleerr 1. Press [REG] button for 3 seconds
2. Enter password + (*) button
3. Press & hold for 3 seconds or longer the [OPEN] button of the remote
controller to be registered
D
Deelleettee rreem
moottee ccoonnttrroolllleerr • Press [REMOTE] button for 5 seconds
• Enter password + (*) button
SSeelleecctt AAuuttoom
maattiicc oorr M
Maannuuaall • Place the (AUTO / MANUAL LOCKING) toggle switch to the 'Auto' or
LLoocckkiinngg M
Mooddee 'Manual' position
VVoolluum
mee SSeettttiinnggss • Set the [Sound Volume] switch to one of followings
• 0 : Mute except for warning/ Alarm sound
• 1 ~ 2 : Sounds will get louder as the level increases
AArrm
m sseeccuurriittyy m
mooddee • When the door is closed of the outside body's number pad will light
up
• Press and hold the button on the outer body for 3 seconds while the
door is locked
D
Diissaarrm
m sseeccuurriittyy m
mooddee 1. Enter password + (*) button
2. Place card or key tag / touch key
SSeettttiinngg tthhee D Doouubbllee LLoocckkiinngg • Press (OPEN/CLOSE) button from inside for more than 2 seconds while
mmooddee ((TToo pprreevveennttss ooppeenniinngg ooff the door is locked
lloocckkeedd ddoooorr ffrroom
m oouuttssiiddee)) • From outside: The double locking sound is generated, the double locking
display LED is lighted and the door cannot be opened when touch
[Number Pad] or a card is applied
D
Deeaaccttiivvaattee tthhee D
Doouubbllee LLoocckkiinngg 1. Turn the manual knob counter clock wise
m
mooddee 2. Pull down handle bar
3. W
Waarrnniinngg!!: Please be cautious when using the function, since the door
can only be opened from the outside using the eem meerrggeennccyy kkeeyy when this
function is set. Please be particularly careful of children accidentally
setting this function from the inside.
SSH
HSS--H
H662255 ((SSH
HSS--55112200))
U
Usseerr PPaassssw
woorrdd C
Chhaannggee// D
Deelleettee • Press [REG] button
• Enter current password + (*) button
• Enter new password + (*) button
• Reenter new password + (*) button for confirmation
C
Caarrdd oorr kkeeyy ttaagg R
Reeggiissttrraattiioonn • Press [REG] button
• Enter Password + (*) button
• Place card or key tag
• Place another card or key tag for registration
C
Caarrdd oorr kkeeyy ttaagg D
Deelleettee • Press [REG] button for 3 seconds
• Enter Password + (*) button
* All cards or key tags will be deleted
R
Reeggiisstteerr rreem
moottee ccoonnttrroolllleerr • Press [REG] button
• Enter password + (*) button
• Press [OPEN] button on remote controller for 3 seconds
D
Deelleettee rreem
moottee ccoonnttrroolllleerr • Press [REG] button for 5 seconds
• Enter password + (*) button
SSeelleecctt AAuuttoom
maattiicc oorr M
Maannuuaall • Place the (AUTO / MANUAL LOCKING) toggle switch to the 'Auto' or
LLoocckkiinngg M
Mooddee 'Manual' position
VVoolluum
mee SSeettttiinnggss • Hold [PASSWORD] button for 5 seconds
• Key in 0 or 1 or 2 or 3 or 4 + (*) button
• 0 : All sounds except the alarm sound are deactivated
• 1 ~ 4 : All sounds are activated and the sound gets louder as the step
goes up. Number 3 is the default.
AArrm
m sseeccuurriittyy m
mooddee • Hold (#) button for 3 seconds when door is closed
• Enter password + (*) button
D
Diissaarrm
m sseeccuurriittyy m
mooddee 1. Enter password+ (*) button
2. Place card or key tag / touch key
D
Doouubbllee AAuutthhoorriizzaattiioonn 1. Press [REG] button
2. Enter "4" + (*) button (Double authorization mode on)
3. Enter "6" + (*) button (Double authorization off)
** The double authorizaion mode only works when the door is open
** When purchased, the product is not set to double authorization mode
initially
** To setup the double authorization mode, more than 1 card must be
registered.
** Double authorization mode will automatically be turned off when all
cards are deleted.
C
Caanncceell iinntteerrnnaall ffoorrccee lloocckk m
mooddee 1. Turn the manual knob counter clock wise
2. Pull down handle bar
SSH
HSS--33332200
M
Maasstteerr PPaassssw
woorrdd C
Chhaannggee// • Press [REG] button
D
Deelleettee • Enter password + (*) button
• Enter new password + (*) button
U
Usseerr PPaassssw
woorrdd C
Chhaannggee • Press [REG] button
• Enter password + (*) button
• Enter user number (1~70) + (*) button
• Enter a new user password + (*) button
• Enter another user number & follow same step or press [REG] button to
quit
C
Caarrdd oorr kkeeyy ttaagg R
Reeggiissttrraattiioonn • Press [REG] button
• Enter master password + (*) button
• Enter user number (1~70) + (*) button
• Place card or key tag for registration
• Enter another user number & follow same step or press [REG] button to
quit
PPaassssw woorrdd// C
Caarrdd oorr kkeeyy ttaagg • Press [REG] button for 5 seconds
DDeelleettee • Enter master password + (*) button
• Enter user number (1~70) of the user password or card + (*) button
SSeelleecctt AAuuttoom
maattiicc oorr M
Maannuuaall • Press [REG] button
LLoocckkiinngg M
Mooddee • Enter password + (*)
• Enter [5] + (*) button to activate or deactivate Auto/Manual function
VVoolluum
mee SSeettttiinnggss • Set the [Sound Volume] switch to one of followings
• 0 : Mute except for warning/ Alarm sound
• 1 ~ 3 : Sounds will get louder as the level increases
AArrm
m sseeccuurriittyy m
mooddee • Close and lock the door
• Press button within 3 seconds
D
Diissaarrm
m sseeccuurriittyy m
mooddee 1. Enter password
2. Place card or key tag / touch key
SSH
HSS--33442200
M
Maasstteerr PPaassssw
woorrdd C
Chhaannggee// • Press [REG] button
D
Deelleettee • Enter current password + (*) button
• Enter new password + (*) button
U
Usseerr PPaassssw
woorrdd C
Chhaannggee • Press [REG] button
• Enter master password + (*) button
• Enter user number (1~70) + (*) button
• Enter a new user password + (*) button
• Enter another user number & follow same step or press [WAKE UP]
button to quit
C
Caarrdd oorr kkeeyy ttaagg R
Reeggiissttrraattiioonn • Press [REG] button
• Enter master password + (*) button
• Enter user number (1~70) + (*) button
• Place card or key tag for registration
• Enter another user number & follow same step or press [WAKE UP]
button to quit
PPaassssw woorrdd// C
Caarrdd oorr kkeeyy ttaagg • Press [REG] button for 5 seconds
DDeelleettee • Enter master password + (*) button
• Enter user number (1~70) of the user password or card + (*) button
SSeelleecctt AAuuttoom
maattiicc oorr M
Maannuuaall 1. Set Auto locking mode:
LLoocckkiinngg M
Mooddee • Place the (AUTO/MANUAL LOCKING) toggle switch in the 'Auto'
position
2. Set Manual locking mode:
• Place the (AUTO/MANUAL LOCKING) toggle switch in the 'Manual'
position
VVoolluum
mee SSeettttiinnggss • Set the [Sound Volume] switch to one of followings
• 0 : Mute except for warning/ Alarm sound
• 1 ~ 2 : Sounds will get louder as the level increases
AArrm m sseeccuurriittyy m
mooddee ((w
whhiillee ddoooorr • Press and hold the [WAKE UP] button
iiss lloocckkeedd)) • Press and hold the [#] botton for 3 seconds
• Enter Master PIN or User PIN Code + (*) button
DDiissaarrm
m sseeccuurriittyy m
mooddee ((jjuusstt 1. Enter password
cchhoooossee oonnee)) 2. Place card or key tag / touch key
SSH
HSS--33112200
M
Maasstteerr PPaassssw
woorrdd C
Chhaannggee// • Press [SET] button for 5 seconds
D
Deelleettee • Enter current master password + (*) button
• Enter new password + (*) button
U
Usseerr PPaassssw
woorrdd C
Chhaannggee • Press [SET] button
• Enter master password + (*) button
• Enter user number (1~70) + (*) button
• Enter a new user password + (*) button
• Enter another user number & follow same step or press [WAKE UP]
button to quit
C
Caarrdd oorr kkeeyy ttaagg R
Reeggiissttrraattiioonn • Press [CARD] button
• Enter master password + (*) button
• Enter user number (1~70) + (*) button
• Place card or key tag for registration
• Enter another user number & follow same step or press [WAKE UP]
button to quit
PPaassssw woorrdd// C Caarrdd oorr kkeeyy ttaagg • Press [CARD] button for 5 seconds
DDeelleettee IInnddiivviidduuaallllyy • Enter master password + (*) button
• Enter user number (1~70) of the user password or card + (*) button
SSeelleecctt AAuuttoom
maattiicc oorr M
Maannuuaall 1. Set Auto locking mode:
LLoocckkiinngg M
Mooddee • Press [SET] button
• Enter [4] + (*) button
2. Set Manual locking mode:
• Press [SET] button
• Enter [5] + (*) button
VVoolluum
mee SSeettttiinnggss • Set the [Sound Volume] switch to one of followings
• 0 : Mute except for warning/ Alarm sound
• 1 ~ 3 : Sounds will get louder as the level increases
AArrm m sseeccuurriittyy m
mooddee ((w
whhiillee ddoooorr • Press and hold the [WAKE UP] button
iiss lloocckkeedd)) • Press and hold the [#] botton for 3 seconds
• Enter Master PIN or User PIN Code + (*) button
DDiissaarrm
m sseeccuurriittyy m
mooddee ((jjuusstt 1. Enter password
cchhoooossee oonnee)) 2. Place card or key tag / touch key
SSH
HSS--11332200
U
Usseerr PPaassssw
woorrdd C
Chhaannggee • Press [REG] button
• Enter current password + (*) button
• Enter a new user password (5 to 12 digits) + (*) button
• Re-enter a new user password + (*) button
C
Caarrdd oorr kkeeyy ttaagg R
Reeggiissttrraattiioonn • Press [REG] button
• Enter password + (*) button
• Place card or key tag for registration
• Place other card for continue registration or press [REG] button to quit
C
Caarrdd oorr kkeeyy ttaagg D
Deelleettee • Press [REG] button for 5 seconds
• Enter password + (*) button
SSeelleecctt AAuuttoom
maattiicc oorr M
Maannuuaall 1. Set Auto locking mode:
LLoocckkiinngg M
Mooddee • Place the (AUTO/MANUAL LOCKING) toggle switch in the 'Auto'
position
2. Set Manual locking mode:
• Place the (AUTO/MANUAL LOCKING) toggle switch in the 'Manual'
position
VVoolluum
mee SSeettttiinnggss • Set the [Sound Volume] switch to one of followings
• 0 : Mute except for warning/ Alarm sound
• 1 ~ 3 : Sounds will get louder as the level increases
AArrm m sseeccuurriittyy m
mooddee ((w
whhiillee ddoooorr • Press and hold the [#] botton for 3 seconds
iiss lloocckkeedd)) • Enter password + (*) button
DDiissaarrm
m sseeccuurriittyy m
mooddee ((jjuusstt 1. Enter password
cchhoooossee oonnee)) 2. Place card or key tag / touch key
C
Caanncceell iinntteerrnnaall ffoorrccee lloocckk m
mooddee • Push the double locking lever until its green part can be seen
SSH
HSS--22332200
U
Usseerr PPaassssw
woorrdd C
Chhaannggee • Press [REG] button
• Enter current password + (*) button
• Enter a new user password (4 to 12 digits) + (*) button
• Re-enter a new user password + (*) button
C
Caarrdd oorr kkeeyy ttaagg R
Reeggiissttrraattiioonn • Press [REG] button
• Enter current password + (*) button
• Place card or key tag for registration
• Place other card for continue registration or press [REG] button to quit
C
Caarrdd oorr kkeeyy ttaagg D
Deelleettee • Press [REG] button for 5 seconds
• Enter password + (*) button
SSeelleecctt AAuuttoom
maattiicc oorr M
Maannuuaall 1. Set Auto locking mode:
LLoocckkiinngg M
Mooddee • Place the (AUTO/MANUAL LOCKING) toggle switch in the 'Auto'
position
2. Set Manual locking mode:
• Place the (AUTO/MANUAL LOCKING) toggle switch in the 'Manual'
position
VVoolluum
mee SSeettttiinnggss • Set the [Sound Volume] switch to one of followings
• 0 : Mute except for warning/ Alarm sound
• 1 ~ 3 : Sounds will get louder as the level increases
AArrm m sseeccuurriittyy m
mooddee ((w
whhiillee ddoooorr • Close and lock the door
iiss lloocckkeedd)) • Press button
DDiissaarrm
m sseeccuurriittyy m
mooddee ((jjuusstt 1. Enter password
cchhoooossee oonnee)) 2. Place card or key tag / touch key
C
Caanncceell iinntteerrnnaall ffoorrccee lloocckk m
mooddee • Push the double locking lever until its green part can be seen
DDiissaabbllee IInnffrraarreedd R
Raayy SSeennssoorr • Press [REG] button
SSeettuupp • Enter [3] + (*) button
Authorised Distributor for SAMSUNG Digital Doorlocks & Home Automation System and the following brand
2 Jurong East Street 21, #03-157 IMM Building Singapore 609601 T: (65)6564 4704 | F: (65)6234 4635 | E: info@hanman.net
Hanman © 2014. All Right Reserve | Privacy Policy About Us | Career | FAQ | Sitemap