Professional Documents
Culture Documents
V/F
Page 1
CLASSIFICATION REPORT
1- PRODUCT CHARACTERISTICS
SAMPLE Nº1
Profiled band of aluminium with injected foam of polyurethane inside. Material with
perforations between the slats.
Technical characteristics:
LGAI Technological Center S.A. Inscrita en el registro Mercantil de Barcelona, Tomo 35.803, Folio1, Hoja Nº B-266.627 Inscripción 1ª C.I.F. : A-63207492
File nº 10/101937-2242 Part 2 Page 2
SAMPLE Nº2
Profiled band of aluminium with injected foam of polyurethane inside. Material with
perforations between the slats.
This classification has been made in compliance with the procedures provided in Standard
UNE-EN 13501-1:2007+A1:2010: “Classification in terms of the behaviour to fire of
construction products and building elements. Part 1: Classification made from the data
gathered during fire reaction tests”.
ALUGIX-39.5
Testing
method MEAN
CRITERIA CLASS B Nº OF TESTS COMPLIANCE
VALUE
UNE-EN-ISO Fs ≤ 150 mm
Fs < 150 mm YES
11925-2:2002 within 60 s 12
FIGRA0.2 MJ ≤ 120 W/s 3 155.34 NO
LFS < edge of sample
3 < to edge YES
THR600s ≤ 7.5 MJ 3 3.91 YES
MEAN
CRITERIA CLASS C Nº OF TESTS COMPLIANCE
VALUE
FIGRA0.4 MJ ≤ 250 W/s 3 143.07 YES
LFS < edge of sample
3 < to edge YES
THR600s ≤ 15 MJ 3 3.91 YES
UNE-EN MEAN
CRITERIA subclass ‘s1’ Nº OF TESTS COMPLIANCE
13823 :2002 VALUE
SMOGRA ≤ 30 m /s 2 2
3 31.63 NO
TSP600s ≤ 50 m2 3 85.58 NO
MEAN
CRITERIA subclass ‘s2’ Nº OF TESTS COMPLIANCE
VALUE
SMOGRA ≤ 180 m2/s2 3 31.63 YES
TSP600s ≤ 200 m2 3 85.58 YES
MEAN
CRITERIA subclass ‘d0’ Nº OF TESTS COMPLIANCE
VALUE
Fall of droplets/particles in
NO YES
flames within 600 s 3
* Smoke measuring procedure has been used according to UNE EN 13823 and to the
document GNB-CPD of SH02- Smoke measurement in the SBI – Discrepancy in the outlet of
the two burners – NB-CPD/SH02/07/047- elaborated by the group of notified organisms.
File nº 10/101937-2242 Part 2 Page 4
PS-78
Testing
method MEAN
CRITERIA CLASS B Nº OF TESTS COMPLIANCE
VALUE
UNE-EN-ISO Fs ≤ 150 mm
Fs < 150 mm YES
11925-2:2002 within 60 s 12
FIGRA0.2 MJ ≤ 120 W/s 3 109.26 YES
LFS < edge of sample
3 < to edge YES
THR600s ≤ 7.5 MJ 3 1.70 YES
MEAN
CRITERIA subclass ‘s1’ Nº OF TESTS COMPLIANCE
VALUE
SMOGRA ≤ 30 m2/s2 3 24.68 YES
UNE-EN TSP600s ≤ 50 m2 3 84.30 NO
13823 :2002 MEAN
CRITERIA subclass ‘s2’ Nº OF TESTS COMPLIANCE
VALUE
SMOGRA ≤ 180 m2/s2 3 24.68 YES
TSP600s ≤ 200 m2 3 84.30 YES
MEAN
CRITERIA subclass ‘d0’ Nº OF TESTS COMPLIANCE
VALUE
Fall of droplets/particles in
NO YES
flames within 600 s 3
* Smoke measuring procedure has been used according to UNE EN 13823 and to the
document GNB-CPD of SH02- Smoke measurement in the SBI – Discrepancy in the outlet of
the two burners – NB-CPD/SH02/07/047- elaborated by the group of notified organisms.
CLASSIFICATION
With regard to its behaviour when reacting to fire, the product, ALUGIX-39.5, is
classified as follows:
With regard to its behaviour when reacting to fire, the product, PS-78, is classified as
follows:
“Point “2.3- Field of Application” below falls beyond the ENAC accreditation
scope”.
The classification is only valid for the product characteristics shown, with the following
parameters being extended:
- Thickness:
Having conducted the test on the profiled aluminium slats with perforation, with a
minimum nominal thickness of 8.2 mm and maximum nominal thickness of 19 mm, it is
concluded by extension that the following products with intermediate nominal
thicknesses:
• This classification is valid for the following final conditions for use:
2.4- Restrictions
Firmado por
Vanessa Tu