Desarmado y Armado
Cit and C13 Engines
Nero de mecio-Sts70%-11 Fach d pubnlon-01/12/2014 rach d actuteaclon-05/12/2014
Air Compressor - Remove and Install
Mes - 1803-010
Removal Procedure
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Pug all hose
assemblies and all tube assemblies. This helps to prevent ad loss, and this helps to keep contaminants from entering the system.
Note: Cleanliness i an important factor. Before you begin the removal procedure, the exterior ofthe components shouldbe thoroughly cleaned. This
‘will help to prevent dit ftom entering the internal mechanism,
NOTICE
Care must be taken to ensure that aids are contained daring
performance of inspection, maintenance, testing, adjusting and repair
ff the product. Be prepared to collect the uid with suitable containers
before opening any compartment or disassembling any component
containing Mids,
Refer to Special Publication, NENG2S00, "Caterpillar Dealer Service
‘Tool Catalog" for tools and supplies suitable to collet and contain
‘uids on Caterpillar products.
Dispose ofall uids according o local regulations ond mandates,
sation onaseast
1, Disconnect tbe assemblies (1), hase (2), and hase assemb
(6) Remove bracket (4)
2. Atacha suitable lifting device to air compressor (3). The weight of air compressor (3) is wpproximtely 24 kg (53 Ib) Remove bots (5) and air
tesa tinea pt papipheineannetae Snes sh eee enc pth ess np aim ACU-IMEENARS- 49 -Dommemeen
compressor (3)
Installation Procedure
[Note: Cleanliness an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the pars to air dry. Donat use wiping