Professional Documents
Culture Documents
Profiles PDF
Profiles PDF
Profiles PDF
CATALOGUE of rolled
open and closed
profiles from Czech
manufacturing
All dimensions
are given in mm. Dimensions wall thickness Dimensions wall thickness
Weights in kg / m c/b/h/b/c 1,5 2 2,5 3 4 5 6 c/b/h/b/c 1,5 2 2,5 3 4 5 6
are indicave only.
C 7/20/25/20/7 0,80 1,00 x x x x x C 15/60/100/60/15 x x 4,53 5,35 6,88 x x
C 8/20/25/20/8 0,82 1,04 x x x x x C 20/60/100/60/20 x x 4,73 5,58 7,19 8,67 10,03
• Length: 2,000
- 13.500 mm, C 7/25/25/25/7 0,92 1,16 x x x x x C 25/60/100/60/25 x x 4,93 5,82 7,50 9,07 10,50
standard 6.000 mm, C 8/25/25/25/8 0,94 1,19 x x x x x C 30/60/100/60/30 x x 5,12 6,05 7,82 9,46 10,97
and special lengths
upon agreement C 7/25/30/25/7 0,98 1,24 x x x x x C 15/60/120/60/15 x x 4,93 5,82 7,50 x x
• Shape tolerance C 8/25/30/25/8 1,00 1,27 x x x x x C 20/60/120/60/20 x x 5,12 6,05 7,82 9,46 10,97
of profiles: accor-
C 8/30/30/30/8 1,12 1,43 1,71 x x x x C 25/60/120/60/25 x x 5,32 6,29 8,13 9,85 11,45
ding to EN 10162
– upon agreement C10/30/30/30/10 1,17 1,49 1,79 x x x x C 30/60/120/60/30 x x 5,51 6,52 8,45 10,24 11,92
• Length tolerance C 20/40/150/40/20 x x x 5,82 7,50 9,07 10,50
of profiles: accor- C 8/20/40/20/8 1,00 1,27 x x x x x
ding to EN 10162 C 10/20/40/20/10 1,05 1,33 x x x x x C 30/40/150/40/30 x x x 6,29 8,13 9,85 11,45
– upon agreement C 15/60/150/60/15 x x x 6,52 8,45 x x
C 8/25/40/25/8 1,12 1,43 x x x x x
(+ / - 1 mm)
C 20/60/150/60/20 x x x 6,76 8,76 10,64 12,39
• Input material: C 10/25/40/25/10 1,17 1,49 x x x x x
Hot-rolled sheet C 30/60/150/60/30 x x x 7,23 9,39 11,42 13,33
C 8/30/40/30/8 1,24 1,59 x x x x x
(HRC rolls) Class C 20/80/160/80/20 x x 6,69 7,94 10,33 x x
S 235, S 355, S 420 C 10/30/40/30/10 1,28 1,65 x x x x x
Cold rolled sheet C 15/60/180/60/15 x x 6,10 7,23 9,39 x x
C 8/40/40/40/8 1,47 1,90 x x x x x
(CRC rolls) quality C 15/40/200/40/15 x x x 6,76 8,76 x x
DC 01 or C 10/40/40/40/10 1,52 1,96 x x x x x
Galvanized sheet C 20/40/200/40/20 x x x 6,99 9,07 11,03 12,86
C 10/30/50/30/10 1,40 1,81 2,18 x x x x
(HDG coils) C 30/40/200/40/30 x x x 7,47 9,70 11,81 13,80
• Upon agreement C 14/30/50/30/14 1,50 1,93 2,34 x x x x • Upon agreement C 15/60/200/60/15 x x x 7,70 10,02 x x
a different radius C 8/40/50/40/8 1,59 2,06 2,49 x x x x a different radius
can be produced can be produced C 20/60/200/60/20 x x x 7,94 10,33 12,60 14,74
than as shown on C 10/40/50/40/10 1,64 2,12 2,57 x x x x
than as shown on C 30/60/200/60/30 x x x 8,41 10,96 13,38 15,68
the sketch below C 10/30/60/30/10 1,52 1,96 2,37 2,76 x x x the sketch below
C 15/60/210/60/15 x x x 7,94 10,33 x x
C 15/30/60/30/15 1,64 2,12 2,57 2,99 x x x
C 15/40/320/40/15 x x x 9,58 12,53 x x
C 10/40/60/40/10 1,75 2,28 2,77 3,23 x x x
Profile C Profile C C 20/40/320/40/20 x x x 9,82 12,84 15,74 18,51
C 15/40/60/40/15 1,87 2,43 2,96 3,46 x x x
c/b/h/b/cxt c/b/h/b/cxt C 30/40/320/40/30 x x x 10,29 13,47 16,52 19,45
C 10/40/80/40/10 1,99 2,59 3,16 3,70 x x x C 15/60/320/60/15 x x x 10,53 13,78 x x
C 15/40/80/40/15 2,11 2,75 3,36 3,93 4,99 x x C 20/60/320/60/20 x x x 10,76 14,10 17,31 20,39
C 20/40/80/40/20 2,23 2,90 3,55 4,17 5,31 6,32 7,21 C 30/60/320/60/30 x x x 11,23 14,73 18,09 21,34
C 10/60/80/60/10 2,46 3,22 3,94 4,64 x x x C 50/60/320/60/50 x x x 12,18 15,98 19,66 23,22
C 15/60/80/60/15 2,58 3,38 4,14 4,87 6,25 x x C 30/35/325/35/30 x x 8,56 10,17 x x x
C 20/60/80/60/20 2,70 3,53 4,34 5,11 6,56 7,89 9,09
C 15/40/100/40/15 x 3,06 3,75 4,40 5,62 x x All dimensions are given in mm.
Weights in kg / m are indicave only.
C 20/40/100/40/20 x 3,22 3,94 4,64 5,93 7,10 8,15
C 25/40/100/40/25 x 3,38 4,14 4,87 6,25 7,50 8,62
C 30/40/100/40/30 x 3,53 4,34 5,11 6,56 7,89 9,09
All dimensions
are given in mm. Dimensions wall thickness Dimensions wall thickness
Weights in kg / m b/h/b 1,5 2 2,5 3 3,5 4 b/h/b 1,5 2 2,5 3 4 5 6
are indicave only. U 15/15/15 0,47 0,60 x x x x U 20/55/20 x 1,38 1,69 1,98 x x x
U 20/15/20 0,59 0,75 x x x x U 30/60/30 x 1,77 2,18 2,57 3,30 x x
• Length: 2,000
- 13.500 mm, U 15/20/15 0,53 0,68 x x x x U 40/60/40 x 2,09 2,57 3,04 3,93 x x
standard 6.000 mm, U 20/20/20 0,65 0,83 x x x x U 50/60/50 x 2,40 2,96 3,51 4,55 x x
and special lengths
U 25/20/25 0,77 0,99 x x x x U 60/60/60 x x 3,36 3,98 5,18 x x
upon agreement
• Shape tolerance U 15/25/15 0,59 0,75 x x x x U 40/65/40 x x 2,67 3,16 4,08 x x
of profiles: accor- U 20/25/20 0,71 0,91 1,10 x x x U 30/70/30 x 1,93 2,37 2,80 3,61 x x
ding to EN 10162
– upon agreement U 25/25/25 0,82 1,07 x x x x U 50/70/50 x 2,56 3,16 3,74 4,87 x x
• Length tolerance U 30/25/30 0,94 1,22 x x x x U 30/80/30 x 2,09 2,57 3,04 3,93 4,75 5,51
of profiles: accor-
ding to EN 10162 U 15/30/15 0,65 0,83 1,00 x x x U 40/80/40 x 2,40 2,96 3,51 4,55 5,53 6,45
– upon agreement U 20/30/20 0,77 0,99 1,20 x x x U 50/80/50 x 2,72 3,36 3,98 5,18 6,32 7,39
(+ / - 1 mm) U 25/30/25 0,88 1,15 1,39 1,62 x x U 60/80/60 x x 3,75 4,45 5,81 7,10 8,34
• Input material:
Hot-rolled sheet U 30/30/30 1,00 1,30 1,59 1,86 x x U 70/80/70 x x x 4,92 6,44 7,89 9,28
(HRC rolls) Class U 35/30/35 x 1,46 1,79 2,10 x x U 80/80/80 x x x 5,39 7,07 8,67 10,22
S 235, S 355, S 420
Cold rolled sheet U 40/30/40 x 1,62 1,98 2,33 x x U 30/90/30 x 2,25 2,77 3,27 4,24 x x
(CRC rolls) quality U 15/35/15 0,71 0,91 1,10 1,27 x x U 40/90/40 x x 3,16 3,74 4,87 x x
DC 01 or U 20/35/20 0,82 1,07 1,30 1,51 x x U 50/90/50 x x 3,55 4,22 5,50 x x
Galvanized sheet
(HDG coils) U 25/35/25 0,94 1,22 1,49 1,74 x x U 25/100/25 x x 2,77 3,27 4,24 5,14 5,98
• Upon agreement U 30/35/30 x 1,38 1,69 1,98 x x • Upon agreement U 30/100/30 x x 2,96 3,51 4,55 5,53 6,45
a different radius a different radius
can be produced U 35/35/35 1,18 1,54 1,88 2,21 x x U 45/100/45 x x 3,55 4,22 5,50 6,71 7,87
can be produced
than as shown on U 15/40/15 0,77 0,99 1,20 x x x than as shown on U 50/100/50 x x 3,75 4,45 5,81 7,10 8,34
the sketch below the sketch below
U 20/40/20 0,88 1,15 1,39 1,62 x x U 60/100/60 x x 4,14 4,92 6,44 7,89 9,28
U 25/40/25 1,00 1,30 1,59 1,86 x x U 70/100/70 x x x 5,39 7,07 8,67 10,22
U 30/40/30 1,12 1,46 1,79 2,10 2,39 2,67 U 80/100/80 x x x 5,86 7,69 9,46 11,16
Profile U U 40/40/40 1,35 1,77 2,18 2,57 2,94 3,30
Profile U U 90/100/90 x x x 6,33 8,32 10,24 12,10
b/h/bxt b/h/bxt
U 15/45/15 0,82 1,07 1,30 x x x U 100/100/100 x x x 6,81 8,95 11,03 13,05
U 25/45/25 1,06 1,38 1,69 1,98 x x U 30/120/30 x x 3,36 3,98 5,18 6,32 7,39
U 20/50/20 1,00 1,30 1,59 1,86 x x U 40/120/40 x x 3,75 4,45 5,81 7,10 8,34
U 25/50/25 1,12 1,46 1,79 2,10 x x U 50/120/50 x x 4,14 4,92 6,44 7,89 9,28
U 30/50/30 1,24 1,62 1,98 2,33 2,67 2,98 U 60/120/60 x x 4,53 5,39 7,07 8,67 10,22
U 35/50/35 x 1,77 2,18 2,57 2,94 3,30 U 70/120/70 x x x 5,86 7,69 9,46 11,16
U 40/50/40 x 1,93 2,37 2,80 3,21 3,61 U 80/120/80 x x x 6,33 8,32 10,24 12,10
U 45/50/45 x 2,09 2,57 3,04 3,49 3,93 U 90/120/90 x x x 6,81 8,95 11,03 13,05
U 50/50/50 x 2,25 2,77 3,27 3,76 4,24 U 100/120/100 x x x 7,28 9,58 11,81 13,99
All dimensions are given in mm. All dimensions are given in mm.
Weights in kg / m are indicave only. Weights in kg / m are indicave only.
All dimensions
are given in mm. Dimensions wall thickness Dimensions wall thickness
Weights in kg / m b/h/b 1,5 2 2,5 3 4 5 6 b1 / h / b2 1,5 2 2,5 3 4 5 6
are indicave only. U 30/140/30 x x 3,75 4,45 5,81 7,10 8,34 U 15/20/20 0,59 0,75 x x x x x
U 40/140/40 x x 4,14 4,92 6,44 7,89 9,28 U 20/30/30 0,88 1,15 1,39 x x x x
• Length: 2,000
- 13.500 mm, U 50/140/50 x x 4,53 5,39 7,07 8,67 10,22 U 20/30/25 0,82 1,07 1,30 x x x x
standard 6.000 mm, U 60/140/60 x x x 5,86 7,69 9,46 11,16 U 15/30/20 0,71 0,91 1,10 x x x x
and special lengths
U 70/140/70 x x x 6,33 8,32 10,24 12,10 U 20/35/30 0,94 1,22 1,49 1,74 x x x
upon agreement
• Shape tolerance U 80/140/80 x x x 6,81 8,95 11,03 13,05 U 30/35/35 1,12 1,46 1,79 2,10 x x x
of profiles: accor- U 90/140/90 x x x 7,28 9,58 11,81 13,99 U 20/40/30 1,00 1,30 1,59 1,86 x x x
ding to EN 10162
– upon agreement U 100/140/100 x x x 7,75 10,21 12,60 14,93 U 35/40/40 1,30 1,70 2,08 2,45 3,14 x x
• Length tolerance U 30/160/30 x x 4,14 4,92 6,44 7,89 9,28 U 30/40/40 1,24 1,62 1,98 2,33 2,98 x x
of profiles: accor-
ding to EN 10162 U 40/160/40 x x 4,53 5,39 7,07 8,67 10,22 U 30/50/40 1,35 1,77 2,18 2,57 3,30 x x
– upon agreement U 50/160/50 x x 4,93 5,86 7,69 9,46 11,16 U 30/60/40 x 1,93 2,37 2,80 3,61 x x
(+ / - 1 mm) U 60/160/60 x x 5,32 6,33 8,32 10,24 12,10 U 40/60/50 x 2,25 2,77 3,27 4,24 x x
• Input material:
Hot-rolled sheet U 70/160/70 x x 5,71 6,81 8,95 11,03 13,05 U 30/80/40 x x 2,77 3,27 4,24 5,14 5,98
(HRC rolls) Class U 80/160/80 x x 6,10 7,28 9,58 11,81 13,99 U 30/80/50 x x 2,96 3,51 4,55 5,53 6,45
S 235, S 355, S 420
Cold rolled sheet U 90/160/90 x x 6,50 7,75 10,21 12,60 14,93 U 30/80/60 x x 3,16 3,74 4,87 5,93 6,92
(CRC rolls) quality U 100/160/100 x x 6,89 8,22 10,83 13,38 15,87 U 30/80/70 x x 3,36 3,98 5,18 6,32 7,39
DC 01 or U 55/162/55 x x x 6,15 8,07 9,93 11,73 U 30/80/80 x x 3,55 4,22 5,50 6,71 7,87
Galvanized sheet
(HDG coils) U 30/210/30 x x 5,12 6,10 8,01 9,85 11,63 U 30/100/40 x x 3,16 3,74 4,87 5,93 6,92
• Upon agreement U 40/210/40 x x 5,51 6,57 8,64 10,64 12,58 • Upon agreement U 30/100/60 x x 3,55 4,22 5,50 6,71 7,87
a different radius a different radius
can be produced U 50/210/50 x x 5,91 7,04 9,26 11,42 13,52 U 30/100/80 x x 3,94 4,69 6,12 7,50 8,81
can be produced
than as shown on U 60/210/60 x x 6,30 7,51 9,89 12,21 14,46 than as shown on U 30/100/100 x x 4,34 5,16 6,75 8,28 9,75
the sketch below the sketch below
U 70/210/70 x x 6,69 7,98 10,52 12,99 15,40 U 30/120/40 x x 3,55 4,22 5,50 6,71 7,87
U 80/210/80 x x x 8,45 11,15 13,78 16,34 Profile U U 30/120/60 x x 3,94 4,69 6,12 7,50 8,81
Profile U U 90/210/90 x x x 8,93 11,78 14,56 17,29 b1 / h / b2 x t U 30/120/80 x x 4,34 5,16 6,75 8,28 9,75
b/h/bxt U 100/210/100 x x x 9,40 12,40 15,35 18,23 U 30/120/100 x x 4,73 5,63 7,38 9,07 10,69
U 30/140/40 x x x 4,69 6,12 7,50 8,81
All dimensions are given in mm.
Weights in kg / m are indicave only. U 30/140/60 x x x 5,16 6,75 8,28 9,75
U 40/140/80 x x x 5,63 7,38 9,07 10,69
U 30/140/100 x x x 6,10 8,01 9,85 11,63
U 30/210/40 x x x 6,33 8,32 10,24 12,10
U 30/210/60 x x x 6,81 8,95 11,03 13,05
U 30/210/80 x x x 7,28 9,58 11,81 13,99
U 30/210/100 x x x 7,55 10,21 12,60 14,93
U 100/120/100 x x x 7,28 9,58 11,81 13,99
All dimensions are given in mm.
Weights in kg / m are indicave only.
All dimensions
are given in mm. Dimensions wall thickness Dimensions wall thickness
Weights in kg / m h/b 1,5 2 2,5 3 4 5 6 h/b 1,5 2 2,5 3 4 5 6
are indicave only. L 20 / 15 0,38 0,49 x x x x x L 80 / 60 x x x 3,17 4,16 5,12 6,05
L 25 / 15 0,44 0,57 x x x x x L 80 / 70 x x x 3,40 4,47 5,51 6,52
• Length: 2,000
- 13.500 mm, L 25 / 20 0,50 0,65 0,79 0,93 x x x L 90 / 40 x x x 2,93 3,85 4,73 5,58
standard 6.000 mm, L 30 / 15 0,50 0,65 x x x x x L 90 / 50 x x x 3,17 4,16 5,12 6,05
and special lengths
L 30 / 20 0,56 0,73 0,89 1,05 x x x L 90 / 60 x x x 3,40 4,47 5,51 6,52
upon agreement
• Shape tolerance L 30 / 25 0,62 0,81 0,99 1,17 x x x L 90 / 70 x x x 3,64 4,79 5,91 6,99
of profiles: accor- L 35 / 20 0,62 0,81 0,99 1,17 x x x L 90 / 80 x x x 3,87 5,10 6,30 7,47
ding to EN 10162
– upon agreement L 35 / 25 0,68 0,89 1,09 1,28 1,65 x x L 100 / 40 x x x 3,17 4,16 5,12 6,05
• Length tolerance L 35 / 30 0,74 0,97 1,19 1,40 1,81 x x L 100 / 50 x x x 3,40 4,47 5,51 6,52
of profiles: accor-
ding to EN 10162 L 40 / 20 0,68 0,89 1,09 1,28 x x x L 100 / 60 x x x 3,64 4,79 5,91 6,99
– upon agreement L 40 / 25 0,74 0,97 1,19 1,40 1,81 x x L 100 / 70 x x x 3,87 5,10 6,30 7,47
(+ / - 1 mm) L 40 / 30 0,79 1,04 1,29 1,52 1,96 x x L 100 / 80 x x x 4,11 5,42 6,69 7,94
• Input material:
Hot-rolled sheet L 40 / 35 0,85 1,12 1,38 1,64 2,12 x x L 100 / 90 x x x 4,34 5,73 7,08 8,41
(HRC rolls) Class L 45 / 25 0,79 1,04 1,29 1,52 1,96 x x L 110 / 30 x x x 3,17 4,16 5,12 6,05
S 235, S 355, S 420
Cold rolled sheet L 45 / 35 0,91 1,20 1,48 1,75 2,28 x x L 110 / 40 x x x 3,40 4,47 5,51 6,52
(CRC rolls) quality L 45 / 40 0,97 1,28 1,58 1,87 2,43 2,96 3,46 L 110 / 50 x x x 3,64 4,79 5,91 6,99
DC 01 or L 50 / 20 x 1,04 1,29 1,52 x x x L 120 / 30 x x x 3,40 4,47 5,51 6,52
Galvanized sheet
(HDG coils) L 50 / 25 x 1,12 1,38 1,64 2,12 x x L 120 / 40 x x x 3,64 4,79 5,91 6,99
• Upon agreement L 50 / 30 x 1,20 1,48 1,75 2,28 x x • Upon agreement L 120 / 50 x x x 3,87 5,10 6,30 7,47
a different radius a different radius
can be produced L 50 / 35 x 1,28 1,58 1,87 2,43 x x L 140 / 30 x x x 3,87 5,10 6,30 7,47
can be produced
than as shown on L 50 / 40 x 1,36 1,68 1,99 2,59 3,16 3,70 than as shown on L 140 / 40 x x x 4,11 5,42 6,69 7,94
the sketch below the sketch below
L 55 / 20 x 1,12 1,38 1,64 x x x L 140 / 50 x x x 4,34 5,73 7,08 8,41
L 55 / 25 x 1,20 1,48 1,75 2,28 x x L 150 / 30 x x x 4,11 5,42 6,69 7,94
Profile L L 60 / 25 x x 1,58 1,87 x x x Profile L L 150 / 40 x x x 4,34 5,73 7,08 8,41
h/bxt L 60 / 30 x x 1,68 1,99 2,59 x x h/bxt L 150 / 50 x x x 4,58 6,04 7,48 8,88
L 60 / 35 x x 1,78 2,11 2,75 x x L 160 / 30 x x x 4,34 5,73 7,08 8,41
L 60 / 40 x x 1,87 2,23 2,90 3,55 4,17 L 160 / 40 x x x 4,58 6,04 7,48 8,88
L 70 / 40 x x 2,07 2,46 3,22 3,94 4,64 L 160 / 50 x x x 4,82 6,36 7,87 9,35
L 70 / 50 x x 2,27 2,70 3,53 4,34 5,11 L 180 / 30 x x x 4,82 6,36 7,87 9,35
L 75 / 40 x x 2,17 2,58 3,38 4,14 4,87 L 180 / 40 x x x 5,05 6,67 8,26 9,82
L 75 / 50 x x 2,36 2,81 3,69 4,53 5,35 L 180 / 50 x x x 5,29 6,99 8,65 10,29
L 80 / 30 x x x 2,46 3,22 x x
All dimensions are given in mm.
L 80 / 40 x x x 2,70 3,53 4,34 5,11 Weights in kg / m are indicave only.
L 80 / 50 x x x 2,93 3,85 4,73 5,58
All dimensions
are given in mm. Dimensions wall thickness
Weights in kg / m b/b 1,5 2 2,5 3 4 5 6
are indicave only. L 15 / 15 0,32 0,42 0,50 x x x x
Perforated profiles for rack systems
L 20 / 20 0,44 0,57 0,70 0,81 x x x
• Length: 2,000
- 13.500 mm, L 25 / 25 0,56 0,73 0,89 1,05 x x x
standard 6.000 mm, L 30 / 30 0,68 0,89 1,09 1,28 1,65 x x
and special lengths
L 35 / 35 0,79 1,04 1,29 1,52 1,96 x x
upon agreement
• Shape tolerance L 40 / 40 0,91 1,20 1,48 1,75 2,28 2,77 3,23
of profiles: accor- L 45 / 45 1,03 1,36 1,68 1,99 2,59 3,16 3,70
ding to EN 10162 Producon of perforated profiles
– upon agreement L 50 / 50 x 1,52 1,87 2,23 2,90 3,55 4,17
• Length tolerance L 55 / 55 x x 2,07 2,46 3,22 3,94 4,64
of profiles: accor-
ding to EN 10162 L 60 / 60 x x 2,27 2,70 3,53 4,34 5,11
– upon agreement L 65 / 65 x x 2,46 2,93 3,85 4,73 5,58
(+ / - 1 mm) L 70 / 70 x x 2,66 3,17 4,16 5,12 6,05
• Input material:
Hot-rolled sheet L 80 / 80 x x x 3,64 4,79 5,91 6,99
Profiles for drainage with welded flanges
(HRC rolls) Class L 90 / 90 x x x 4,11 5,42 6,69 7,94
S 235, S 355, S 420
Cold rolled sheet L 100 / 100 x x x 4,58 6,04 7,48 8,88
(CRC rolls) quality
DC 01 or All dimensions are given in mm.
Galvanized sheet Weights in kg / m are indicave only.
(HDG coils)
• Upon agreement
a different radius
can be produced
than as shown on CLOSED SPECIAL
the sketch below
Profiles
Material thickness 1 - 3.25 mm
Maximum flat paern 200 mm
Profile L
h/bxt
Material Material
Strip of non-alloy steel, hot-rolled and cold-rolled Strip of non-alloy steel, hot-rolled and cold-rolled
(material class 11) (material class 11)