Professional Documents
Culture Documents
2
What is health and safety?
Why it is so important?
Who is responsible for health and safety?
What is cost of health and safety?
How to improve current situation of our industry ?
3
Safety is the state of being "safe" (from French sauf), the
condition of being protected against physical, social, spiritual,
financial, political, emotional, occupational, psychological,
educational or other types or consequences of failure, damage,
error, accidents, harm or any other event which could be
considered non-desirable
4
This can take the form of being protected from the event or
from exposure to something that causes health or economical
losses. It can include protection of people or of possessions.
Instead, when you hear the word safety, think of it as a word
that applies to the way you do everything in life. Think of it as a
procedure to keep you from harm.
5
the word safety refers to your freedom from danger, injury
and damage, and to your personal security. The word safety has
been used so often that many of you may think of it as a
"Preaching Word", or a word that forces you to alter your ways
or change bad habits.
6
•It is safe condition of acting and conducting any construction
activity
•It assurance that every worker will return their home safely
7
Miss Shahnila Gul (B.Engg,
Q.U.E.S.T & MSc, Kingston
University, UK) 07/07/2020 8
An Accident:
An accident is an incident plus its consequences; the end of product
of a sequences of events or actions resulting in an undesired
consequences(Injury, Property damages,interruption,delay).
9
An Injury: An injury is thus a consequences of an incident-but not
the only possible one. it has been shown that hundreds of incidents
occurs in the construction industry for every one that causes injury
or loss.
Hazard ;Hazard means the inherent property or ability of some
thing to cause harm –the potential to interrupt or interfere with a
process or person. Hazards may arise from interacting or
influencing components for example two chemical interacting to
produce a third
10
Risk: Risk is the chance or probability of loss, an
evaluation of the potential for failure .it is easy to
confuse the terms Hazards and risk but a simple way to
remember the difference is that hazard describes
potential to harm, risk is the likelihood that harm will
result in the particular situation or circumstance,
coupled with a measure of the degree of severity of
that harm.
11
Employer
Design Consultant
Main Contractor
Sub-Contractor
12
Employer is main stake holder of any construction project.
phase.
Contract document.
13
Designer should design a project practically safe
achieve
14
Main contractor should be responsible for safety of
construction worker.
environment
15
Main contractor should spend money on PPE
and ambulance
16
Main contractor should prepare policy for health and safety
17
Contractor should spent some money on PPE And safety
18
Awareness of health and safety in construction
19
Miss Shahnila Gul (B.Engg,
Q.U.E.S.T & MSc, Kingston
University, UK) 07/07/2020 20
Miss Shahnila Gul (B.Engg,
Q.U.E.S.T & MSc, Kingston
University, UK) 07/07/2020 21
Miss Shahnila Gul (B.Engg,
Q.U.E.S.T & MSc, Kingston
University, UK) 07/07/2020 22
https://www.slideshare.net/debajitroy/construction
-site-safety?next_slideshow=1
23