You are on page 1of 5

CONKI

THE CROCHET
MONSTER
CONKI
THE CROCHET MONSTER

intermediate

SIZES TENSION (GAUGE)


Approx 22 30 38 45 75 cm When making a toy such as this, it is not essential to work to an
height 8¾ 11¾ 15 17¾ 29½ in exact tension (gauge). However, if your tension (gauge) is too
loose, the toy stuffing will show through the fabric and spoil
YOU WILL NEED the look of the finished item. Therefore, make a tension swatch
Smallest monster before you start the toy to make sure that the fabric feels firm. If
●● 100g ball of Paintbox Yarns Socks (As seen on cover) it feels too loose, change to a smaller size hook.
. 1 × A - Zebra: Flare
. 1 × B - Pixel: Glacier GOOD TO KNOW
. 1 × C - Zebra: Classic ●● Paintbox Yarns cannot accept responsibility for the finished
●● 2.5mm (UK 12 - US B1/C2) crochet hook item if any yarn other than the recommended yarn is used.
Small monster ●● Yarn quantities are based on average requirements and are
●● 50g balls of Paintbox Yarns Baby DK (As seen on cover) therefore approximate.
. 1 × A - Bubblegum Pink ●● Colour reproduction is as close as printing processes will allow.
. 1 × B - Buttercup Yellow ●● Instructions are written using UK terminology with changes
. 1 × C - Slate Grey for US terminology given in italics in round brackets ( )
●● 3.5mm (UK 9 - US E4) crochet hook afterwards.
Medium monster ●● Repeat figures in round brackets ( ) the number of times
●● 50g balls of Paintbox Yarns Cotton Aran (As seen on cover) stated afterwards.
. 1 × A - Royal Blue ●● Instructions are given for the smallest size, with changes
. 1 × B - Banana Cream for the larger sizes given in square brackets [ ] afterwards.
. 1 × C - Red Wine ●● Where only one figure is given, this relates to all sizes.
●● 4mm (UK 8 - US G6) crochet hook ●● Where the figure 0 appears, no stitches, times or rows are
Bigger monster worked for this size.
●● 200g ball of Paintbox Yarns Chunky Pots (As seen on cover)
. 1 × A - Constellation ABBREVIATIONS
●● 100g ball of Paintbox Yarns Simply Chunky (As seen on cover) blo = back loop only; cm = centimetres; cont = continue;
. 1 × B - Champagne White dc (sc) = double (single) crochet in = inches;
. 1 × C - Blush Pink invdc2tog (invsc2tog) = invisible double (single) crochet 2
●● 5.5mm (UK 5 - US 19) crochet hook together through the front loop only; pm = place marker;
Biggest monster ss = slip stitch; st(s) = stitch(es); tog = together.
●● 100g balls of Paintbox Yarns Wool Mix Super Chunky
(As seen on cover)
. 3 × A - Racing Green Visit www.paintboxyarns.com for
. 4 × B - Stormy Grey more patterns or to buy yarn online
. 4 × C - Coffee Bean
●● 10mm (UK 000 - US N15) crochet hook
All monsters
●● Yarn needle
●● Toy stuffing
●● Stitch marker
8¾ [11¾: 15: 17¾: 29½] in

●● Extra yarn or buttons for facial embroidery


22 [30: 38: 45: 75] cm

NOTE
The 5 different sized monsters are created using different
weight yarns and their relevant sized hooks.

2
BODY
With 2.5 [3.5: 4: 5.5: 10] mm (UK 12 [9: 8: 5: 000] – SMALL EAR (MAKE 2 PIECES)
US B1/C2 [E4: G6: I9: N15]) hook and Yarn C, With 2.5 [3.5: 4: 5.5: 10] mm (UK 12 [9: 8: 5: 000] –
make adjustable ring. US B1/C2 [E4: G6: I9: N15]) hook and Yarn A,
round 1 6 dc (sc) into ring, pull up to tighten ring, do not join make adjustable ring.
round but pm and begin to work in spirals. round 1 6 dc (sc) into ring, pull up to tighten ring, join with ss.
round 2 2 dc (sc) in each st around. 12 dc (sc). 6 dc (sc).
round 3 [2 dc (sc) in next st, 1 dc (sc)] around. 18 dc (sc). Change to Yarn B.
round 4 [2 dc (sc) in next st, 2 dc (sc)] round 2 2 dc (sc) in each st around, join round with ss. 12 dc
around. 24 dc (sc). (sc).
round 5 [2 dc (sc) in next st, 3 dc (sc)] around. 30 dc (sc). Change to Yarn A.
round 6 [2 dc (sc) in next st, 4 dc (sc)] around. 36 dc (sc). round 3 [2 dc (sc) in next st, 1 dc (sc)] around, join round with
round 7 1 dc (sc) in each st around. 36 dc (sc). ss. 18 dc (sc).
round 8 [2 dc (sc) in next st, 5 dc (sc)] around. 42 dc (sc). Fasten off yarn leaving a long tail for sewing up.
rounds 9 & 10 1 dc (sc) in each st around. 42 dc (sc). With wrong sides facing, sew together the two discs.
Join round 10 with ss.
Change to Yarn B. LEGS (MAKE 2)
round 11 1 dc (sc) in each st around, begin working in spirals With 2.5 [3.5: 4: 5.5: 10] mm (UK 12 [9: 8: 5: 000] –
again. 42 dc (sc). US B1/C2 [E4: G6: I9: N15]) hook and Yarn A,
round 12 [2 dc (sc) in next st, 6 dc (sc)] around. 48 dc (sc). make adjustable ring.
rounds 13-18 1 dc (sc) in each st around. 48 dc (sc). round 1 6 dc (sc) into ring, pull up to tighten ring, do not join
Join round 18 with ss. round but pm and begin to work in spirals.
Change to Yarn A. round 2 2 dc (sc) in each st around. 12 dc (sc).
rounds 19-24 1 dc (sc) in each st around, begin working in round 3 [2 dc (sc) in next st, 1 dc (sc)] around. 18 dc (sc).
spirals again. 48 dc (sc). round 4 [2 dc (sc) in next st, 2 dc (sc)] around. 24 dc (sc).
round 25 [invdc2tog (invsc2tog), 6 dc (sc)] around. 42 dc (sc). round 5 [2 dc (sc) in next st, 3 dc (sc)] around. 30 dc (sc).
Begin stuffing firmly from here. round 6 [2 dc (sc) in next st, 4 dc (sc)] around, join round with
rounds 26-28 1 dc (sc) in each st around. 42 dc (sc). ss. 36 dc (sc).
round 29 [invdc2tog (invsc2tog), 5 dc (sc)] around. 36 dc (sc). round 7 1 ch (does not count as a st), 1 dcblo (scblo) in each
round 30 1 dc (sc) in each st around. 36 dc (sc). st around, do not join round but pm and begin to work in
round 31 [invdc2tog (invsc2tog), 4 dc (sc)] around. 30 dc (sc). spirals. 36 dcblo (scblo).
round 32 [invdc2tog (invsc2tog), 3 dc (sc)] around. 24 dc (sc). rounds 8 & 9 1 dc (sc) in each st around. 36 dc (sc).
round 33 [invdc2tog (invsc2tog), 2 dc (sc)] around. 18 dc (sc). Join round 9 with ss.
round 34 [invdc2tog (invsc2tog), 1 dc (sc)] around. 12 dc (sc). Change to Yarn B and work 6 rounds in dc (sc) in a spiral.
round 35 (use a normal decrease st for this round) [dc2tog round 16 [invdc2tog (invsc2tog), 4 dc (sc)] around. 30 dc (sc).
(sc2tog)] around. 6 dc (sc). Work 5 rounds in dc (sc) in a spiral. Join last round with ss.
Fasten off yarn, leaving a long tail for closing top of Body. Change to Yarn C and work 3 rounds in dc (sc) in a spiral.
Thread needle with yarn tail and run around the 6 sts at round 25 [invdc2tog (invsc2tog), 3 dc (sc)] around. 24 dc (sc).
opening, pull tightly to close hole, fasten off securely. Weave Work 9 rounds straight in dc (sc) in a spiral.
in all ends. round 35 [invdc2tog (invsc2tog), 2 dc (sc)] around. 18 dc (sc).
Work in dc (sc) in a spiral until Leg measures
LARGE EAR (MAKE 2 PIECES) 12 [16: 20: 24: 40] cm, 4¾ [6¼: 7¾: 9½: 15¾] in, long.
With 2.5 [3.5: 4: 5.5: 10] mm (UK 12 [9: 8: 5: 000] – Fasten off yarn leaving a long tail for sewing to Body.
US B1/C2 [E4: G6: I9: N15]) hook and Yarn B, Stuff Legs firmly.
make adjustable ring.
round 1 6 dc (sc) into ring, pull up to tighten ring, join with ss.
6 dc (sc).
Change to Yarn A.
round 2 2 dc (sc) in each st around, do not join round but pm
and work in spiral. 12 dc (sc).
round 3 [2 dc (sc) in next st, 1 dc (sc)] around, join round with
ss. 18 dc (sc).
Change to Yarn B.
round 4 [2 dc (sc) in next st, 2 dc (sc)] around, do not join
round but pm and work in spiral. 24 dc (sc).
round 5 [2 dc (sc) in next st, 3 dc (sc)] around.
round 6 [2 dc (sc) in next st, 4 dc (sc)] around, join round with
ss. 36 dc (sc).
Fasten off yarn leaving a long tail for sewing up.
With wrong sides facing, sew together the two discs.

3
ARMS (MAKE 2)
With 2.5 [3.5: 4: 5.5: 10] mm (UK 12 [9: 8: 5: 000] –
US B1/C2 [E4: G6: I9: N15]) hook and Yarn C,
make adjustable ring.
round 1 6 dc (sc) into ring, pull up to tighten ring, do not join
round but pm and begin to work in spirals.
round 2 2 dc (sc) in each st around. 12 dc (sc).
round 3 [2 dc (sc) in next st, 1 dc (sc)] around. 18 dc (sc).
round 4 [2 dc (sc) in next st, 2 dc (sc)] around, join round with
ss. 24 dc (sc).
round 5 1 ch (does not count as st), 1 dcblo (scblo) in each
st around, do not join round but pm and begin to work in
spirals. 24 dcblo (scblo).
rounds 6-15 1 dc (sc) in each st around. 24 dc (sc).
Join round 15 with ss.
Change to Yarn B.
Work 2 rounds in dc (sc) in a spiral.
round 18 [invdc2tog (invsc2tog), 2 dc (sc)] around. 18 dc (sc).
Work 8 rounds in dc (sc) in a spiral.
round 27 [invdc2tog (invsc2tog), 4 dc (sc)] around. 15 dc (sc).
Work 6 rounds in dc (sc) in a spiral.
Fasten off yarn leaving a long tail for sewing to Body.
Stuff Arms firmly.

FINISHING
Attach legs to bottom of body as shown in photographs.
Attach arms to sides of body as shown in photographs.
Attach ears to either size of head as shown in photographs.

With your selected method, add your chosen facial features


for the monsters.

4
CONKI THE
CROCHET
MONSTER

TOP TIP
Give your monster
a personality when
you stitch on the
face. Happy, scary
or silly? It's up to
you!

WE'VE
USED
A - Zebra: Flare
B - Pixel: Glacier &
C - Zebra: Classic

You might also like