Professional Documents
Culture Documents
Quiz No. 07
Quiz No. 07
A. 20
B. 10
C. 15
D. 25
2. The National Master Plumbing Association of C RIGHT 1
the Philippines (NAMPAP) was organized and
registered with the Securities and Exchange
Commission in what year?
A. 1933
B. 1934
C. 1935
D. 1945
3. A registered Master Plumber shall not injure C RIGHT 1
falsely or maliciously, directly or indirectly, the
reputation of another registered Master Plumber
by reviewing his/her work for the same client
unless the professional services of the former
have been officially ______and all professional
fees have been fully paid by the client.
A. Endorsed
B. Accepted
C. Terminated
D. Completed
4. When shower interceptors are built above C RIGHT 1
ground, the sub-floor and rough side of walls to a
height of no less than ____mm above the top of
the finished dam or threshold shall be first lined.
With sheet lead or copper or with other durable
and water tight material.
A. 25
B. 75
C. 105
D. 50
5. In water test, the water shall be kept in pipe C RIGHT 1
system or in portion under test for at least
______minutes before inspection starts. The
system shall be tight at all joints.
A. 20
B. 10
C. 15
D. 3
6. What is AVB in backflow prevention devices? B RIGHT 1
A. 25 mm
B. 50 mm
C. 32 mm
D. 55 mm
8. Potable water inlet to gravity tank shall be B RIGHT 1
controlled by a ___ float switch or electrode type
of level water level control to prevent the tank
from overflow.
A. Foot valve
B. Float valve
C. Check valve
D. Gate valve
9. What is water fixture supply unit of privately B RIGHT 1
use bathtub?
A. 1
B. 2
C. 3
D. 4
10. Bell and spigot cast iron soil pipe (CISP) and A RIGHT 1
other similar joints shall be firmly packed with
oakum or hemp and filled with molten pig lead
to n depth of not less than ____mm.
A. 25.4
B. 50.2
C. 10
D. 13
11. Solder and fluxes with lead content which B RIGHT 1
exceeds______ are prohibited in the piping
systems used to conveyed potable water.
A. 0.003
B. 0.002
C. 0.001
D. 0.008
12. What is CS and PS means? B RIGHT 1
A. Commercial Specification and Product
Specification
B. Commercial Standards and Product Standards
A. 0.65
B. 0.55
C. 0.5
D. 0.45
16. A valve or opened by the fall and rise C RIGHT 1
respectively, of an attached ball floating on the
surface
A. Check valve