Professional Documents
Culture Documents
Window 7 manual
Connect the ADS serial port (rs232 connection) to the pc with the rs232 cat5 cable
if the pc doesn’t accept serial connection. The Usb-232 connection is used in
placed of serial connection between the ADS and PC.
Proper connection illustrated below.
Connect the KVM serial port (rs232 connection) to the pc if the pc doesn’t accept
serial use the usb-232 connection
PC->USB RS 232 cable -> RS232 CAT5 cable-> ADS serial port
USB RS 232 driver: driver (u232-p9) any other generic USB RS 232 driver
will work but no driver is available from ConnectPro
- Once the file is done downloading, the computer will recognize the
connection as a com port under device manager
Com Port’s location
Device manager is needed to check on the ports being used and what is being
initialized
Right click my Computer
-Call the device by either resetting the device or disconnecting the device and call
again
--make sure serial connection is made between the device and PC
(Disconnect the call and power supply to the device afterward, call the device and
re-attach the power supply) if resetting the device isn’t working.
-the device will give the information and version number
RS 232 commands
Serial
Function Screen Respost
Command
ADS Status
ADS-14-I F/W: V1.2
Buzzer: OFF
ADS Sync
Auto Scan: 2(8Sec)
DDM Keyboard: Console Port
s1v0 List ADS All Status CH-1_DVI_Trigger Off
CH-2_DVI_Trigger Off
CH-3_DVI_Trigger Off
CH-4_DVI_Trigger Off
ADS Video 1
ADS Audio 1
audio/ video
async asynchronized asynch
command
audio/ video
sync synchr
synchronized command
SYNC jump to console
ch(x=1,2,3,….) channel Y
CHX