Professional Documents
Culture Documents
Getting Started Guide v5.0 PDF
Getting Started Guide v5.0 PDF
Table of Contents
What’s Included ...................................................................................... 1-1
Step by Step Checklist ...........................................................................2-1
Install MPLAB X IDE ............................................................................... 3-1
Install the XC compiler ...........................................................................4-1
Install Lab Center Proteus VSM ............................................................ 5-1
Install the Proteus Plug-In for MPLAB X ............................................... 5-2
Install your Class files............................................................................6-1
Run and Debug to Obtain the Verification Message ........................... 7-1
Get Help ..................................................................................................8-1
What’s Included
Download folder
Example
1-1
GETTING STARTED GUIDE
Checklist
2-1
GETTING STARTED GUIDE
2-2
GETTING STARTED GUIDE
Install
Requirements
Development Environment: MPLAB® IDE X
Operating System: PC Windows XP or Vista or Windows 7
Installing
4
Once you have downloaded the MPLAB X installer, installation is easy.
Browse to where the installer was downloaded. You are looking for the file called:
mplabx-ide-vX.XX-windows-installer.exe
3-1
GETTING STARTED GUIDE
Click Next
You will need to agree to the License and
Click Next
Click Next
Click Next
Done !
Just click Finish
3-2
GETTING STARTED GUIDE
Install XC Compiler
Procedure
MPLAB-XC8-vX.XX-windows.exe
MPLAB-XC16-vX.XX-windows.exe
MPLAB-XC32-vX.XX-windows.exe
Click Next
4-1
GETTING STARTED GUIDE
Click Next
Click Next
Click Finish
4-2
GETTING STARTED GUIDE
Click Next
Click Next
Click Finish
5-1
GETTING STARTED GUIDE
Install
the MPLAB X Proteus Plug In
Procedure
5-2
GETTING STARTED GUIDE
Click Next
Click Next
Click Finish
5-3
GETTING STARTED GUIDE
5-4
GETTING STARTED GUIDE
Procedure
The ‘<classname> Student Install.zip’ file is a Winzip file that includes all the training material for a class. Once
you have registered you will have received the link to the tools and class materials. This file will be named in the
format of:
PRExxx Student Install.zip
Use an Unzip tool to open the Student Install.zip file and unpack all the files to the folder:
C:\MTT\
Then click Unzip
If you change the default path dur-
ing the unzip the lab manuals used
in class will have the wrong path
names.
Then Unzip
6-1
GETTING STARTED GUIDE
6-2
GETTING STARTED GUIDE
When the desktop opens, go to the File menu in the upper left corner.
7-1
GETTING STARTED GUIDE
Now click
Open Project
7-2
GETTING STARTED GUIDE
Everything will load for you. All you need to do is click on Debug -> Debug Project
or click on the shortcut icon shown below.
You may need to click the CONTINUE icon to start the simulation.
Depending upon the MPLAB X configuration, the simulation may start automatically, or it
may need to be manually started by clicking CONTINUE
7-3
GETTING STARTED GUIDE
For MPSIMX:
The verification message is displayed in the UART 1 Output window
Congratulations!
7-4
GETTING STARTED GUIDE
Get Help
If you have tried everything and the Getting Started Lab
still will not run, we have several options to get help.
Contact us through :
www.microchip.com/
support
Here you can ask specific
questions if you are stuck
on a single topic.
8-1
GETTING STARTED GUIDE
Get Help
www.microchip.com/forums
Sign into the forums on www.microchip.com. You can review previous
posts or post your own questions. Microchip Technical Training engi-
neers monitor these forums closely.
Each class has its own forum so you can post class specific questions.
Just search on the topic TRAINING.
8-2