Professional Documents
Culture Documents
Open back up ,run setup file and Click on ignore if asked during installation.
After installation ,for activation open crack folder and click on Key Gen.EXE .
Provide activation code, generate activation key and use that key to activate.
Double click on
Click on File/New.
Give Drawing Name ( road map…).
Browse Project and drawing Location using ( Browse button).
Create project/give Project information name and click on Ok.
In Load Setting window select m 1000 set(metric 1:1000) and click Next
Select linear units as meter and angular units as Grads and click Next.
Select Horizontal scale as 1:1000 and Vertical scale as 1: 100 and click Next.
Select Categories (Nepal) and click Next,Next,Next,Next and Finish and click Ok.
Now project in LD has been created.
Get your coordinate file in CSV format by using save as option in MS-Excel.
Click on Menu browser/ Points /Point Setting and define
o Marker size as 0.5
o Text size as 0.5)
o Check required visibility option and select suitable color and click Ok.
Click on Points /Import/Export points/Import points.
Select Format asn PENZD(comma delimited)/Source file ( Open your csv coordinate file ).
Click on Ok ,select Over write , click Ok and Wait till transferring points.
Type z (zoom) in command bar and click Enter.
Type E (Extent) command bar and click Enter.
Now you can see your coordinate points.
Click on Points / Remove from drawing /select Yes and click Enter.
Select g(group) and Enter (Points will be removed from drawing).
Set current layer for drawing and digitize in corresponding layers using field sketch.
Now you can digitize in current layer using point data (image data)
Create boundary of your project area to create contour by using polyline tool.
Click on Terrain/Terrain Model Explorer/Right click on terrain.
Create New surface (Give name of surface).
Expand Terrain and Surface(click on plus sign) .
Right click on point file and select add point file.
Select point file /Give format and source file and click Ok.
Click Boundary and right click to Add boundary definition and give name of boundary .
Select o (show/Hide/Outer) type of boundary.
Make break lines along edge (yes..) and click Enter.
Click on Terrain / Set current surface (select require surface if there are more than one surface).
Right Click on surface and click on Build (wait till building surface)and click ok.
Check on
Click on Terrain/Contour style Manager/Contour appearance Ok. -Use point file data
Select contours only in Contour display and spline curve in Smoothing option. -Use point group data
Select required text style, label position etc. -Apply Boundaries
Click on Terrain /Create Contours.
Give Surface /elevation Range and vertical scale/ name of Contours ( major and minor ).
Define Intervals ( Major contours and Minor contours) and click ok.
Erase old contours use yes (y) command.
Now you can see contours in your screen.
Use different color for major and minor contour.
U:units
C:circle
L:line
Aa:area
Qc:calculator
D:dimension
Type different words in command bar for getting that tool.
Thank You