Equations for the Design of Standard Sprocket Teeth
This spreadsheet will generate the calculations needed to create an approximation of a sproocket tooth profile. Refer to the GEARS-IDS lesson Designing Drawing a Sprocket.
P (Chain Pitch) 0.25
N (Number of Teeth) 21 Dr (Roller Diameter) 0.13 PD 1.6774 Ds 0.1337 <B R 0.0668 A 37.8571 B 15.3333 ac 0.1040 M 0.0821 T 0.0638 E 0.1708 xy 0.0456 yz 0.0164 ab 0.1820 W 0.1800 V 0.0271 F 0.1061 H 0.0895 S 0.1369 Teeth
Note: Depending on pitch, very low values will yield erroneous results (example any value less than 8 for a 25P sprocket yields erroneous results.