Professional Documents
Culture Documents
TD 28at 28XP 28XPS 28exp 8PG BW Oct2015 PDF
TD 28at 28XP 28XPS 28exp 8PG BW Oct2015 PDF
( )
( )
Inlet for Filtered Seal Outlet for 1st Stage Interstage Labyrinth Inlet for Buffer Outlet for 2nd Stage Separation Gas
(or Process) Gas Leakage and Buffer Gas Gas (Optional) Leakage and Separation Gas Supply
Type 28XP Tandem Arrangement
TYPE 28
SEAL BEARING
(OR PROCESS) CAVITY
GAS
Separation Seal -
contact John Crane
al (Or Process) Gas for options
Labyrinth
SEAL BEARING
(OR PROCESS) CAVITY
GAS
Separation Seal -
contact John Crane
Seal (Or Process) Gas for options
Labyrinth
SEAL
(OR PROCESS)
GAS
BEARING
CAVITY
Separation Seal -
contact John Crane
Seal (Or Process) Gas for options
Labyrinth
JO H N C RA N E
G AS SEA LS
*Single Seal Arrangement for applications not requiring a safety back-up seal.
JO H N C RA N E
G AS SEA LS
*Double Seal Arrangement where hazardous gas is not permissible to leak into atmosphere.
JO H N C RA N E
G AS SEA LS
*Tandem Seal Arrangement for applications requiring a safety back-up seal.
TYPE 28
DRY-RUNNING, NON-CONTACTING GAS SEALS
Technical Specification
Leakage (sl/min)
Leakage (SCFM)
3
75
2 50
5000 RPM
1 25
0 0
2.187 3.187 4.187 5.187 6.125 7.125 8.125 9.125 10.125
(inch)
50 100 150 200 250 (mm)
Seal Size
Air, 300°F/150°C
3
75
2 50
1 25
0 0
0 200 400 600 800 1,000 1,200
(psig)
0 20 40 60 80 (bar g)
Pressure
Power (HP)
5000 rpm;
3.0
2 100 psig/7 bar g
2.0
1 1.0
0 0
2.187 3.187 4.187 5.187 6.125 7.125 8.125 9.125 10.125
(inch)
50 100 150 200 250 (mm)
Seal Size
*This information should not be used for specification purposes. Contact DryGasSeals@johncrane.com for more information about exact application requirements.
TYPE 28
DRY-RUNNING, NON-CONTACTING GAS SEALS
Technical Specification
North America Europe Latin America Middle East & Africa Asia Pacific
United States of America United Kingdom Brazil United Arab Emirates Singapore
Tel: 1-847-967-2400 Tel: 44-1753-224000 Tel: 55-11-3371-2500 Tel: 971-481-27800 Tel: 65-6518-1800
Fax: 1-847-967-3915 Fax: 44-1753-224224 Fax: 55-11-3371-2599 Fax: 971-488-62830 Fax: 65-6518-1803
If the products featured will be used in a potentially dangerous and/or hazardous process, your John Crane representative should be consulted prior to
their selection and use. In the interest of continuous development, John Crane Companies reserve the right to alter designs and specifications without
prior notice. It is dangerous to smoke while handling products made from PTFE. Old and new PTFE products must not be incinerated. ISO 9001 and
ISO14001 Certified, details available on request.
©2015 John Crane Revised 10/15 www.johncrane.com TD-28AT/28XP/28XPS/28EXP