You are on page 1of 1

70 "2012” SEMINAR INFORMATION

TRANSMISSION ASSEMBLY TIPS

Turbine Shaft Transmission Fluid


Speed Sensor Temperature Sensor
(Under Valve Body)

Shift Solenoid “C” Line Pressure


2-6 Clutch Control Solenoid

Shift Solenoid “B”


3-5-R Clutch

Transmission
Range Sensor

Shift Solenoid “E” Shift Solenoid “A” Torque Converter Shift Solenoid “D”
4-5-6 Clutch 1-2-3-4 Clutch Clutch Solenoid Low/Reverse

Output Shaft
Speed Sensor

Figure 47

A 2WD application
would have an
additional feed tube
2-6 Clutch for lube to the
Feed Tube extension housing
bushing.

On a 2 wheel Drive model, A 4 wheel drive model will


there will be a tube here to not have this tube. The will
Low/Reverse Clutch lube the extension housing be left open. No damage
Feed Tubes bushing. will occur due to a 041”
orifice in the valve body
spacer plate which is a
minimal leak.

Figure 48 Figure 49
Copyright © 2012 ATSG
Automatic Transmission Service Group

You might also like