Professional Documents
Culture Documents
Mark
for Review
(1) Points
Configuration (*)
Post-installation/configuration (*)
Performance Tuning
Pre-configuration (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
2. Which one is the newest release of the operating system for the ZFS Storage
family? Mark for Review
(1) Points
Microsoft Windows 8 OS
Oracle Solaris 10
Incorrect Sorry, that is not correct. Please review the course content and try again.
3. Which items of ZS3 features require separately license? Mark for Review
(1) Points
Data compression
Clones (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
4. What is the response time if a customer has Oracle Premier Support? Mark
for Review
(1) Points
1 Hour
1.5 Hours
2 Hours (*)
3 Hours
Incorrect Sorry, that is not correct. Please review the course content and try again.
False
Correct Correct
6. Which of the following is NOT one of the rules for preventing ESD damage? Mark for
Review
(1) Points
Make sure your grounding straps are not in contact with your skin. (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
7. What is the difference between a soft failure and a hard failure? Mark for
Review
(1) Points
Soft failures are easily detected and rapidly fixed. Hard failures are difficult to identify and fix.
Soft failures occurs in the software. Hard failures occurs in the hardware.
Soft failures weaken components and is difficult to detect. Hard failures are easy to identify and
trace back to ESD. (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
8. Low humidity environments reduce the voltage generated from friction and
moving, Mark for Review
(1) Points
True
False (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
9. Which three options are formal steps in the EIS methodology? Mark for
Review
(1) Points
System sizing
Performance Tuning
Incorrect Sorry, that is not correct. Please review the course content and try again.
Differences between 7000 vs ZS3
(Answer all questions in this section)
10. Oracle Intelligent Storage Protocol (OISP) embeds hints in the NFSv4 protocol
with each write as to which two items? Mark for Review
(1) Points
Incorrect Sorry, that is not correct. Please review the course content and try again.
11. The release of 2013.1 is not supported on which hardware paltforms Mark for Review
(1) Points
ZS2
7120 (*)
ZS3
ZS1
7320 (*)
7420 (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
2011.1.5.0
2011.1.3.2
2011.1.4.2 (*)
2011.1.4.1
Incorrect Sorry, that is not correct. Please review the course content and try again.
13. During an upgrade all resources are counted in what state until confirmedup to
date Mark for Review
(1) Points
updating'
on hold'
pending' (*)
waiting
Incorrect Sorry, that is not correct. Please review the course content and try again.
14. Identify four new capacity threshold alerts Mark for Review
(1) Points
capacity usage
Incorrect Sorry, that is not correct. Please review the course content and try again.
15. What is the storage administrator doing when removing the Analytics data at a
chosen level of granularity that are older than some chosen age Mark for Review
(1) Points
Incorrect Sorry, that is not correct. Please review the course content and try again.
16. What is considered the GRACe period during a Forced takeover Mark for Review
(1) Points
the period after NFSv4 server outage in which the only operations serviced are those of cluster
nodes reclaiming their state
the period before NFSv4 server outage in which the only operations serviced are those of clients
reclaiming their state
the period after NFSv4 server outage in which the only operations serviced are those of clients
reclaiming their state (*)
the period before NFSv4 server outage in which all the operations serviced are those of clients
reclaiming their state
the period after NFSv4 server outage in which all the operations serviced are those of clients
reclaiming their state
Incorrect Sorry, that is not correct. Please review the course content and try again.
17. Which new features allows for more efficient Use of Network Ports Mark
for Review
(1) Points
Port Binding
Link Aggregation
IPMP
VNIC (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
18. Identify two new NDMP Protocol Statistics that can be found in Analytics
Mark for Review
(1) Points
NDMP usgae
NDMP latencies
NDMP IOPs
Incorrect Sorry, that is not correct. Please review the course content and try again.
Replication uasge
Incorrect Sorry, that is not correct. Please review the course content and try again.
20. Which two replication progress monitoring activity indicators are available?
Mark for Review
(1) Points
Incorrect Sorry, that is not correct. Please review the course content and try again.
22. What is the default mode for the FC SAN ports? Mark for Review
(1) Points
initiator/target
undefined
target (*)
initiator
Incorrect Sorry, that is not correct. Please review the course content and try again.
23. Identify two enhancements to the scheduled snapshot labels Mark for
Review
(1) Points
option label which is specified at both the project level and individual share
option label which is specified at the project level or individual share, but not both (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
24. Which of the following unique language that enables dynamic communication
between an Oracle Database and Oracle’s ZFS ZS3 Storage Appliances Mark for Review
(1) Points
Internet Protocol
Incorrect Sorry, that is not correct. Please review the course content and try again.
25. Which protocal available only for Oracle Database 12c customers using Oracle
Direct NFS (dNFS) with Oracle ZFS Storage Appliances that are running software version OS8 Mark
for Review
(1) Points
Internet Protocol
Incorrect Sorry, that is not correct. Please review the course content and try again.
26. The Oracle Intelligent Storage Protocol (OISP) in OS8 can be used to do: Mark for Review
(1) Points
System management
Patch management
Incorrect Sorry, that is not correct. Please review the course content and try again.
27. What are the advantages of ZIL Train Model parallelizes the
zil_commit_writer()? Mark for Review
(1) Points
Incorrect Sorry, that is not correct. Please review the course content and try again.
28. Which four systems are members of the Oracle ZS3 Storage family? Mark
for Review
(1) Points
ZS3-1
ZS3-ES (*)
ZS3-4 (*)
ZS3-2 (*)
ZS3-BA (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
29. Which three statements are correct about the ZFS Storage Appliance: ZS3-BA?
Mark for Review
(1) Points
Incorrect Sorry, that is not correct. Please review the course content and try again.
30. Which 3 options are key software features of Data Reduction in ZS3 Storge?
Mark for Review
(1) Points
Deduplication
Compression (*)
31. What is the primary purpose of the EIS Test Procedure Plan? Mark for Review
(1) Points
To confirm that the Explorer Data Collector has been run and analyzed by the Oracle Risk
Analysis System
To generate a test plan and related scripts to be run by the customer to validate the EIS
installation
To capture and agree on the tests that will be applied by the installer to Oracle products during
an EIS installation (*)
To formally document and present the output of the Sun Validation Test Suite (SunVTS)
Incorrect Sorry, that is not correct. Please review the course content and try again.
32. The key differentiators of the ZS3-2 model of the ZFS Storage Appliance are:
Mark for Review
(1) Points
Drive density
33. Select the three controller options in Storage ZS3-2. Mark for Review
(1) Points
Incorrect Sorry, that is not correct. Please review the course content and try again.
34. What are the three sales focus areas for database integration? Mark for
Review
(1) Points
Configuration tools
Installation tools
Snap Management Utility (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
35. If the storage administrator wants to protect a triple disk failure, which disk
protection should be used? Mark for Review
(1) Points
RAID 0 + 1
RAID 6
Incorrect Sorry, that is not correct. Please review the course content and try again.
36. Select the four controller options in Storage ZS3-4. Mark for Review
(1) Points
Incorrect Sorry, that is not correct. Please review the course content and try again.
37. Which is the most effective metric for identifying performance issues? Mark
for Review
(1) Points
Latency (*)
Capacity
IOPS
Throughput
Percent utilization
Correct Correct!
38. Identify how thin provisioning in ZFSSA is conducted. Mark for Review
(1) Points
Incorrect Sorry, that is not correct. Please review the course content and try again.
39. Identify how RAID-Z avoids the RAID 5 "write hole" Mark for Review
(1) Points
using on-write
using on-read
using copy-on-read
using copy-on-first-write
Incorrect Sorry, that is not correct. Please review the course content and try again.
40. Alerts monitor the system pool as a what? Mark for Review
(1) Points
whole (*)
dataset
usage
core
Correct Correct!
1. Oracle Intelligent Storage Protocol (OISP) embeds hints in the NFSv4 protocol with each write as
to which two items? Mark for Review
(1) Points
Incorrect Sorry, that is not correct. Please review the course content and try again.
7120 (*)
ZS3
ZS1
7420 (*)
7320 (*)
ZS2
Incorrect Sorry, that is not correct. Please review the course content and try again.
2011.1.4.1
2011.1.5.0
2011.1.4.2 (*)
2011.1.3.2
Incorrect Sorry, that is not correct. Please review the course content and try again.
4. During an upgrade all resources are counted in what state until confirmedup to
date Mark for Review
(1) Points
pending' (*)
on hold'
waiting
updating'
Correct Correct
capacity usage
7. What is considered the GRACe period during a Forced takeover Mark for
Review
(1) Points
the period after NFSv4 server outage in which the only operations serviced are those of cluster
nodes reclaiming their state
the period after NFSv4 server outage in which the only operations serviced are those of clients
reclaiming their state (*)
the period before NFSv4 server outage in which the only operations serviced are those of clients
reclaiming their state
the period after NFSv4 server outage in which all the operations serviced are those of clients
reclaiming their state
the period before NFSv4 server outage in which all the operations serviced are those of clients
reclaiming their state
Incorrect Sorry, that is not correct. Please review the course content and try again.
8. Which new features allows for more efficient Use of Network Ports Mark
for Review
(1) Points
IPMP
Link Aggregation
Port Binding
VNIC (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
9. Identify two new NDMP Protocol Statistics that can be found in Analytics
Mark for Review
(1) Points
NDMP usgae
NDMP latencies
NDMP IOPs
Incorrect Sorry, that is not correct. Please review the course content and try again.
Replication uasge
Replication IOPs
Replication bytes (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
12. What are two new SAN capabilities? Mark for Review
(1) Points
Incorrect Sorry, that is not correct. Please review the course content and try again.
13. What is the default mode for the FC SAN ports? Mark for Review
(1) Points
target (*)
initiator
undefined
initiator/target
Correct Correct
14. Identify two enhancements to the scheduled snapshot labels Mark for
Review
(1) Points
option label which is specified at the project level or individual share, but not both (*)
option label which is specified at both the project level and individual share
option label which is specified at only the project level
Incorrect Sorry, that is not correct. Please review the course content and try again.
15. Which of the following unique language that enables dynamic communication
between an Oracle Database and Oracle’s ZFS ZS3 Storage Appliances Mark for Review
(1) Points
Internet Protocol
Internet Protocol
Correct Correct
17. The Oracle Intelligent Storage Protocol (OISP) in OS8 can be used to do: Mark
for Review
(1) Points
System management
Patch management
Incorrect Sorry, that is not correct. Please review the course content and try again.
18. What are the advantages of ZIL Train Model parallelizes the
zil_commit_writer()? Mark for Review
(1) Points
Incorrect Sorry, that is not correct. Please review the course content and try again.
19. Which four systems are members of the Oracle ZS3 Storage family? Mark
for Review
(1) Points
ZS3-BA (*)
ZS3-ES (*)
ZS3-1
ZS3-2 (*)
ZS3-4 (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
20. Which three statements are correct about the ZFS Storage Appliance: ZS3-BA?
Mark for Review
(1) Points
Deduplication
Compression (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
22. What is the primary purpose of the EIS Test Procedure Plan? Mark for
Review
(1) Points
To formally document and present the output of the Sun Validation Test Suite (SunVTS)
To generate a test plan and related scripts to be run by the customer to validate the EIS
installation
To confirm that the Explorer Data Collector has been run and analyzed by the Oracle Risk
Analysis System
To capture and agree on the tests that will be applied by the installer to Oracle products during
an EIS installation (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
23. The key differentiators of the ZS3-2 model of the ZFS Storage Appliance are:
Mark for Review
(1) Points
Drive density
Incorrect Sorry, that is not correct. Please review the course content and try again.
24. Select the three controller options in Storage ZS3-2. Mark for Review
(1) Points
(Choose all correct answers)
Incorrect Sorry, that is not correct. Please review the course content and try again.
25. What are the three sales focus areas for database integration? Mark for
Review
(1) Points
Installation tools
Configuration tools
Incorrect Sorry, that is not correct. Please review the course content and try again.
Previous Page 5 of 8 Next Summary
26. If the storage administrator wants to protect a triple disk failure, which disk protection should
be used? Mark for Review
(1) Points
RAID 6
RAID 0 + 1
Incorrect Sorry, that is not correct. Please review the course content and try again.
27. Select the four controller options in Storage ZS3-4. Mark for Review
(1) Points
28. Which is the most effective metric for identifying performance issues? Mark
for Review
(1) Points
IOPS
Capacity
Latency (*)
Percent utilization
Throughput
Incorrect Sorry, that is not correct. Please review the course content and try again.
29. Identify how thin provisioning in ZFSSA is conducted. Mark for Review
(1) Points
30. Identify how RAID-Z avoids the RAID 5 "write hole" Mark for Review
(1) Points
using on-read
using on-write
using copy-on-first-write
using copy-on-read
whole (*)
dataset
usage
core
Correct Correct!
Post-installation/configuration (*)
Pre-configuration (*)
Configuration (*)
Performance Tuning
Incorrect Sorry, that is not correct. Please review the course content and try again.
33. Which one is the newest release of the operating system for the ZFS Storage
family? Mark for Review
(1) Points
Oracle Solaris 10
Microsoft Windows 8 OS
Incorrect Sorry, that is not correct. Please review the course content and try again.
34. Which items of ZS3 features require separately license? Mark for Review
(1) Points
Data compression
Clones (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
35. What is the response time if a customer has Oracle Premier Support? Mark
for Review
(1) Points
1 Hour
1.5 Hours
2 Hours (*)
3 Hours
Incorrect Sorry, that is not correct. Please review the course content and try again.
False
Correct Correct
37. Which of the following is NOT one of the rules for preventing ESD damage?
Mark for Review
(1) Points
Make sure your grounding straps are not in contact with your skin. (*)
Correct Correct
38. What is the difference between a soft failure and a hard failure? Mark for
Review
(1) Points
Soft failures occurs in the software. Hard failures occurs in the hardware.
Soft failures are easily detected and rapidly fixed. Hard failures are difficult to identify and fix.
Soft failures weaken components and is difficult to detect. Hard failures are easy to identify and
trace back to ESD. (*)
Incorrect Sorry, that is not correct. Please review the course content and try again.
39. Low humidity environments reduce the voltage generated from friction and
moving, Mark for Review
(1) Points
True
False (*)
Correct Correct
40. Which three options are formal steps in the EIS methodology? Mark for
Review
(1) Points
Performance Tuning
System sizing