Professional Documents
Culture Documents
PRODUCTION DATA information is current as of publication date. Copyright 1988, Texas Instruments Incorporated
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
schematic
6
VCC +
4
1 OUT +
IN +
8
IN +
A 2
Gain
B 7 5
Adjust OUT –
3 VCC –
Pin numbers are for D8 and P packages.
absolute maximum ratings over operating free-air temperature (unless otherwise noted)
Supply voltage, VCC + (see Note 1 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 V
Supply voltage, VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 8 V
Differential input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 5 V
Voltage range, any input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + to VCC –
Output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
NOTES: 1. All voltage values except differential input voltages are with respect to the midpoint between VCC + and VCC – .
RAB RAB
+ VO) )2 VO*
50 Ω 50 Ω 50 Ω 50 Ω 0.2 µF
1 kΩ 1 kΩ
V OC
Figure 1 Figure 2
RAB
0.2 µF RAB
50 Ω A VO +
+ B
A
50 Ω 0.2 µF + B
– VO – VOD RL = 2 kΩ
VIC –
1 kΩ 1 kΩ
Figure 3 Figure 4
TYPICAL CHARACTERISTICS
See Figure 1
300
100
70
200
40
100
0 10
±3 ±4 ±5 ±6 ±7 ±8 1 4 10 40 100 400 1k
VCC ± – Supply Voltage – V RAB – Gain-Adjustment Resitance – Ω
Figure 5 Figure 6
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
30
No Load
25 No Signal
TA = 25°C
I CC – Supply Current – mA
20
15
10
ICC
0
±3 ±4 ±5 ±6 ±7 ±8
VCC ± – Supply Voltage – V
Figure 7
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.