Professional Documents
Culture Documents
Readme
Readme
==================
This directory contains experimental packaging for running Wireshark under the
Portable Apps
(http://www.portableapps.com/).
The packaging relies on the same "manifest" as used by the U3 packaging. Therefore
there is no need to maintain a list of relevant files for the Portable Wireshark.
Only the U3 list needs to be updated.
Currently only an additional menu item for Wireshark is added - the other tools
could be added to Portable Apps menu if required.
WinPcap
=======
NSIS
====
The Portable Apps packaging uses the NullSoft Scriptable Installer System (NSIS) to
create a installation package to install onto the USB drive, and a launcher to
launch Wireshark from the USB drive.
INI Settings
============
The Wireshark Portable Launcher will look for an ini file called
WiresharkPortable.ini within its directory. It is only necessary to have a ini
file if you wish to change the default configuration.
There is an example INI included with this package to get you started. The INI
file is formatted as follows:
[WiresharkPortable]
WiresharkDirectory
WiresharkExecutable
AdditionalParameters
DisableWinPcapInstall
WinPcapInstaller
MSVCRedist
The WiresharkDirectory entry should be set to the *relative* path to the directory
containing the Wireshark Portable Launcher (WiresharkPortable.exe). This entry must
be present.
The WiresharkExecutable entry allows you to set the Wireshark Portable Launcher to
use an alternate EXE call to launch Wireshark.
The WinPcapInstaller allows you to specify a different WinPcap installer than the
default one included in the distribution. For example, if you download a later
version.