Professional Documents
Culture Documents
(JZR&TP) Stress Analysis For 77RA-MPC-1211 Line
(JZR&TP) Stress Analysis For 77RA-MPC-1211 Line
ü The scope of this summary is to calculate the stresses, displacements, forces and moments
acting (internally & externally) on the piping under various conditions/cases due to the
combined effect of internal pressure, maximum differential temperature, bending and external
loads as applicable. These calculations or analysis are carried out using CAESAR-II Software.
1. General
SKEC piping stress engineer has inspected the small bore piping system using CAESAR-II
software to confirm the operating stability.
2. Description
1) Line No: 2”-MPC-1211-3CC1P-EC
2) Line Size: 2inch
3) Design Temperature: 270℃
4) Design Pressure: 25 bar
5) Hydro-test Pressure: 76.7 bar
6) Pipe Class: 3CC1P (5.54mm)
Node 140
Node 420
Stress (kPa)
Node No Load Case Ratio (%) Results
Code Allowable
Dy= -6.16 mm
Node 420
Dy= -5.4 mm
5. Conclusion
- The systems are safe in all aspects as calculated stresses and deflections are within
acceptable limits.