\ | ae
SO TU RUC
a DEC ru)
SUT Ce
Bers] 4 Er Sd
RT SELF
OC Ns
ET RTA eC
Te RS Re a he
* ProCreate putty is softer so it is much
CRT oN e-em) nM EM aL relelare Re}
a cured surface.
Holds detail throughout the cure - no more
Deu UC aah ce ack}
Renae
Very easy to push around and smooth.
TT ie Tore eleVe le eme Cle
contrast and helps with spotting mistakes.
Files and grinds very smooth with no rough
Pr POR OL eee akc m
Excellent self adhesion.
Clee ROC m ee eel eels
stick to tools during cure.Professional Sculptors Putty
Tahar Customizable formula - Work life, hardness and color may all be
adjusted to achieve different effects as shown in the Mixing Chart below.
% Resin | % Hardener | 24 Hour Work Life, | Comments
(white)| (black) Hardness, | Minutes
Shore D (75° F/ 23°C)
(+/- 2)
55 180 Softer and more flexible,
good for organic shapes.
Color: dark gray
Harder and more rigid.
Color: medium gray
Very hard and rigid.
60 40 75 90 Good for machines and
hard edges. Color: light gray
Note: All figures are approximate since cure can change depending on the ambient temperature and
amount of putty mixed (See “Additional Curing Information” section)
To Use: Features and Benefits:
1. Cut - desired amount of each part. * Mixed Color: Gray
2. Mix - two parts together with fingers until a + No shrinkage
uniform gray color is achieved + Very easy to smooth
Easy tooli | tick)
3. Apply - to surface and sculpt. asy tooling and less sticky
Holds Extremely Fine Detail
See chart for projected working time. Customizable Formula '
Manipulating Cure Time: Additional Curing Information:
* Place the mixed ProCreate™ in the freezer * Thin sections will cure more slowly
to stop hardening. + Thicker sections will cure faster
+ Place the mixed ProCreate™ under a + Heat will cure the epoxy faster
warm lamp (95° F / 35° C max - oven * Cold will cause the epoxy to
recommended) to speed the hardening process. cure more slowly
"8kgaftmarke
Manufactured by: Kraftmark Company, P.O. Box 84, Spring City, PA 19475
Contact us at: info@kraftmark.biz