The annular velocity calculated from the given bit, drill pipe, and pump output was 76.8 metres/min, which may cause hole erosion. To achieve optimum annular velocity between 18 and 36 metres/min for effective hole cleaning and stability, the pump output should be set between 468 and 937 litres/minute.
The annular velocity calculated from the given bit, drill pipe, and pump output was 76.8 metres/min, which may cause hole erosion. To achieve optimum annular velocity between 18 and 36 metres/min for effective hole cleaning and stability, the pump output should be set between 468 and 937 litres/minute.
The annular velocity calculated from the given bit, drill pipe, and pump output was 76.8 metres/min, which may cause hole erosion. To achieve optimum annular velocity between 18 and 36 metres/min for effective hole cleaning and stability, the pump output should be set between 468 and 937 litres/minute.