MOMENTI /E’ See
CoatOSil’ MP 200 Silane —
for Waterborne and
Solventborne Coatings Seti ll
MARKETING BULLETIN SILANES - COATINGS ADDITIVES
CoatOSil MP 200 silane is an epoxy functional silane oligomer for use as a coupling
agent, adhesion promoter and crosslinker for waterborne coatings using acrylic,
styrene-acrylic, vinyl-acrylic, polyurethane dispersions, epoxy dispersion and other
anionic or cationic binders.
This product comprises a polyfunctional structure bearing gamma-glycidoxy groups,
which can allow for reduced emission of methanol upon hydrolysis of the material as
compared with typical monomeric epoxy silanes
Key Features and Typical Benefits
The gamma-glycidoxy propyl epoxide ring available in CoatOSil MP 200 silane can react
with many different organic functionalities, while the alkoxy silane groups still available on
the oligomeric structure typically bond strongly to inorganic substrates and fillers. Being a
100% active material, CoatOSil MP 200 silane can be considered for waterborne, solvent borne
or powder coating systems. The oligomeric structure of CoatOSil MP 200 silane can help deliver
the following advantages over typical monomeric silanes:
fae Benefit Typical performance benefits include:
+ Improved abrasion and scrub
More active silane Lower loading rate resistance, particularly in
highly-filled formulations using
silane-reactive fillers such as tale
and kaolin (calcined or hydrous)
+ Improved adhesion to concrete,
Partially hydrolyzed
tad condeneedcilane Lower alcohol liberation
Bleene nee Water and UV resistance
glass and metals (cold-rolled steel,
ions ScelneSeeiy, HDG and aluminum, etc.)
Poly-epoxy alkoxy Faster grafting rate into polymers + Improved chemical and corrosion
silane structure Faster curing rate resistance
+ Improved hardness
PAGEMARKETING BULLETIN CoatOSil* MP 200 Silane for Waterborne and Solventborne Coatings
General Considerations for Use
‘Typical product use level varies from 0.1 wt% to 2 wt% of binder solid content depending on desired performance
attributes,
Guidelines for Incorporation in Waterborne Systems
Incorporation in Latex/Binder
Latex/Binder manufacturers can incorporate CoatOSil MP 200 silane and supply to coatings formulators as a regular
binder. Itis advisable to incorporate CoatOSil MP 200 silane at the end of polymerization, after the biocide and base
addition, at a temperature <40 °C. Latex pH should be maintained below 9 and as close to neutral as possible.
Sulfciont mixing after epoxy silane addition typically ranges between 15.30 minutes under medium to high shear
Depending on the binder chemistry, CoatOSil MP 200 silane incorporation and equilibration in a finished latex may
take from 1 hour up to 24 hours; however, no change in physical properties such as particle size or viscosity over that
time period and after storage typically occurs
Incorporation during Formulation
CoatOSil MP 200 silane can be added at any stage of coating formulation. In the pigment grinding stage, itcan be
added along with other liquid ingredients before pigment addition (TiO, and/or fillers). In lab scale evaluations, itis
recommended to allow the pigment paste to equilibrate over typical grinding duration in manufacturing to mimic
realistic conditions. CoatOSil MP 200 silane can also be added at any step in the letdown stage before or after binder
addition. itis recommended to experiment with different stages of addition to identify optimal conditions for desired
performance and stability. To help ensure effective incorporation of CoatOSil MP 200 silane, equilibrate formulated
coatings overnight before application and performance testing,
CoatOSil MP 200 Silane in Acrylic Latex for Improved Water Resistance
42.2% PVC Exterior Sample Formulation
Parts per
Ingredients atte
Demineralized Water 260
Propylene Glycol 10
Antiseptic 2
Thickensr 25
Defoamer 13
‘Ammonia (25% aq,.50l.) 05
ee Dispersant 42
10 mins
Ti02 185 185
Kaolin’ 120 120)
Caco3 45 45
30 ming:
Demineralized Water 34 34
Latex Blank 330
Latex with CoatOSil MP 200 silane 330
becewn Defoamer 06 06
Ammonia (25% aq.s0l.) 05 05
Coalescense Solvent 10 10
Antiseptic 15 15
Thickener 10 10
Total 1000 1000
included a istrative exarptes only. Mom
representation or wareny of any kind with egarclto any
er Stained tienen ich MOMENTIVE
Inventing possibilitiesMARKETING BULLETIN CoatOSil* MP 200 Silane for Waterborne and Solventborne Coatings
0.1% CoatOSil MP 200 Modi
.d Commercial Acrylic Latex by Weight
Acrylic Latex Acrylic Latex
containing
off CoatOSil MP 200 silane
ter 2h
Acrylic latex modified with CoatOSil MP 200 silane demon:
De eC cd
PAGES “ sk of Moment o ‘ MOMENTIVE"MARKETING BULLETIN CoatOSil* MP 200 Silane for Waterborne and Solventborne Coatings
CoatOSil MP 200 Silane in 2K Waterborne Epoxy Coating for Improved Corrosion Re:
WB Epoxy Dispersion Sample Formulation
Ingredients Part A
EPLREZt 6520 WHS3
(Coalescenee SoNent
Dispersant
Filler (1102, MICA, CaCO3, Kaolin)
EPL-REZ 6520 WHS3
(CostOSil MP 200 silane
Demineralized Water
Ingredients Part B
EPIKURE? 6870W53
‘Corrosion Inhibitor
Total
Part Aand Part B were mixed
together and then the paint
was sprayed onto the steel
substrate. CoatOSil MP 200 silane
0.5% in the total paint by weight.
trolled VOC less than 100 gy
jnufecured ving sh formulations.
Neutral Salt Spray Test (ASTM B117)
Knife scratching after 240 hrs. on smooth steel
No silane ‘CoatOSil 1770 CoatOSil MP 200
silane silane
= MOMENTIVE
Inventing possiblities
PAGE a scoutstinanMARKETING BULLETIN CoatOSil* MP 200 Silane for Waterborne and Solventborne Coatings
CoatOSil MP 200 silane in solventborne systems
CoatOSil MP 200 silane can be considered for use as an adhesion promoter or binder on polysulfide, urethane,
epoxy and acrylic caulks, sealants, adhesives, and coatings. The product is a polyfunctional structure bearing
gamma-glycidoxy graups, which is an excellent candidate to consider to reduce emissions of
hydrolysis of the material 3s compared with monomeric epoxy silanes.
methanol upon
CoatOSil MP 200 Silane in Solventborne High-Solid Two-Pack Epoxy Primer for Corrosion Protection
SB Epoxy Dispersion Sample Formulation
Ingredients Part A Weight
Epikote? 834-80 26.91
Wetting Agent 047
Dispersant 054
Mix first part prior to pigment dispersion inttoducs under dispersion
Iron Oxide Pigment 26.16
Zine Phosphate 558
Tale 1177
caco3 227
Basofor 7.68
Dispersion 1500 rpm/30 min. Max. temp. 40 C-Hegmann Gauge = 5
Epikotet 834-80 2.75%04.75
CoatOSil MP 200 Ot02
Mix Component Part A-600 epm
MEK a2
1 Methoxy-2-Propanol 0.78t0 1.56
Xylene ote 153
Ingredients Part B Weight
Epokuret 3055 7168%.9:47
Ratio Epony (Resin+CoatOSil MP 200 silane) / Amine: 1,1.1 or 1.2
Catalyst Epikure? 3253 ors
Total 100
sy of ny kin
Ff ogi t ony
Peer neu tothe Anette
Corot
Breese ho nne!
ern)
PAGES
si MOMENTIVE
Inventing possiblitiesMARKETING BULLETIN CoatOSil* MP 200 Silane for Waterborne and Solventborne Coatings
Standard / CoatOSil MP 200 silane Standard / CoatOSil MP 200 silane
= "
Epoxy / Amine
a
NSS 96 hours +
Tape adhesion
4 cycles;
NSS 96 hours +
‘Tape adhesion
CoatOSil MP 200 silane demonstrated significantly
Beet uc ce nc
PAGES ‘costa tndomnts Mmenive Rearmance MaePAGE?
MARKETING BULLETIN CoatOSil* MP 200 Silane for Waterborne and Solventborne Co:
Patent Status
Nothi
strued to imply the nox
lation to practice any inve
Limitations
Customers must evaluate Mome
se Pecformance Materials products and make their own determination as to fitnes
Cf use in their particular applications.
Product Safety, Handling and Storage
est Safety Data Sheet (SDS) and label for product
(ety information, safe handling
ditions required fo
For product stora
please review Cer
with MPM products (for
Information provided by the m
ty within our stated specific
of other materials in
ay require addition.
MOMENTIVE"MARKETING BULLETIN
oce Tok ear CUE Cc ee erty
PAGE’
Customer Service Centers
Worldwide
Email: commercialservices@momentive.com
Americas
+1800 295 2392
+1614 986 2895
Europe, Middle East, Latin America
Africa and India e
+55 11.4534 9660
00800 4321 1000
+40213 044229
Disclaimer
Asia Pacific
China
1800 820 0202
+86 21 3860 4892
All Other Countries
+603 9206 1543
Japan
0120975 400
+81 276 206182
MOMENTIVE
Inventing poss