Professional Documents
Culture Documents
Expanded Metals
Introduction ............................................................................................................. 2
Commercial Applications ............................................................................................................. 4
Specification ............................................................................................................. 6
Walkway Meshes Load / Span Table ............................................................................................................. 7
Walkway Meshes Installation Method ............................................................................................................. 8
Expanded Metals ............................................................................................................. 9
Micromeshes ............................................................................................................. 11
Facade Meshes ............................................................................................................. 12
High Security Fencing Meshes ............................................................................................................. 14
Bestal is one of the leading Expanded Metal manufacturer and supplier in Singapore established
since 1993 with more than 20 years of industrial experience. Projects supplied include HDB multi-
storey carparks, skybridges, walkways, green walls, feature walls, security fencings, ceilings and
facades, etc.
Bestal has developed a wide range of aluminium expanded metal to meet the growing demand for
building facade applications. We have advanced technology machines that enable us to produce
cost effective and high quality products.
Bestal has a wide range of patterns of Perforated Metal to satisfy customers’ needs.
We also supply stainless steel, aluminium, steel plates that comply to international standards and
will continue to provide the best service and quality to our customers.
Bestal is also well known for its architectural finishing products such as High Ribbed Formwork,
Ribbed-Lath, Plaster Beads & Laths, Steel Lintels and PVC Beads for masonry, plastering etc.
Our Vision
To be a leading expanded metal manufacturer and supplier recognized for its cost effectiveness, reli-
ability, efficiency and commitment to quality
Our Mission
1
BESTAL EXPANDED METALS
MATERIALS TYPE
1. Steel: Manufactured using high quality, low carbon steel complying to JIS G3131 (BS 1449) SPHC.
Normally hot-dipped galvanised (to BS 729:1971) for anti-corrosion.
2. Stainless Steel: Manufactured using SS304/316 grade for highly corrosive environment applications.
3. Aluminium: Manufactured using high quality commercial grade aluminium sheets (Grade AA1100-H14) 99%
pure aluminium.
4. Powder-coated: All expanded steel meshes can be powder-coated for decorative and chemical resistant
applications. A wide range of colour selection is avaliable upon request.
Conventional / Flattened
Before rolling After rolling
Meshes
1. Conventional mesh in which the strands are
inclined from the plane of the steel sheet.
2. Flattened mesh in which the strands are in the
BMM 3035 BMM 3035F same plane as metal sheet by press-rolled.
2
BESTAL EXPANDED METALS
PRODUCT SPECIFICATION
overall
LWO thickness
Expanded metals is specified first with SWM (Short Way of Mesh) followed
ss
ne
d
by LWM (Long Way of Mesh). Generally the thickness of metal and the
stran
thick
SWM SWO
strand width.
stran
d
widt
LWM h
Note: The LWM can be precise whilst the SWM dimension and strand width is approximate
subject to some tolerance. (±10 percent) due to manufacturing constraints.
SWM - Short Way of Mesh
LWM - Long Way of Mesh
BWK 50080
3
BESTAL EXPANDED METALS
COMMERCIAL APPLICATIONS
Expanded metals is used in virtually all sectors of the industry - buildings, engineering works, oil refineries,
shipyards, process industries and many others. Expanded metals can be functionally or decoratively in applications.
Commercial applications include walkway, screening, safety guards, security installations, decorative racks, suspended
ceiling, pedestrian barrier, grilles, balustrades, fencing, greenwall, facade, etc.
Catwalk
M & E Catwalk
Walkway
HDB Carpark
Drain Grating
Facade
Green Wall
4
BESTAL EXPANDED METALS
Decorative Ceiling
Screening
Safety Fencing
Green Wall
Green Wall
5
BESTAL EXPANDED METALS
SPECIFICATION
Category Mesh Material Mesh Opening Thickness Strand Weight Standard Sheet
Reference Type SWM x LWM (mm) (mm) +/-10% LWM x SWM
(mm) x (mm) (+/-10%) (+/-10%) (kg/m2) (mm) x (mm)
6
BESTAL EXPANDED METALS
Uniform Load 5.70 2.50 1.50 23.50 10.70 6.00 51.00 25.00 14.00
BWK 50075 (KN/m2)
BWK50110A Point Load 1.30 0.80 0.60 2.80 1.90 1.40 4.40 3.00 2.20
(KN)
Uniform Load 8.20 3.65 2.02 33.80 15.30 8.66 70.00 36.10 20.50
BWK 50105 (KN/m2)
BWK 60075A Point Load 1.80 1.22 0.92 4.20 2.80 2.12 6.40 4.56 3.45
(KN)
Uniform Load 4.80 2.20 1.20 20.00 9.00 5.10 43.00 21.00 12.00
BWK 50080 (KN/m2)
BWK 50075A Point Load 1.10 0.74 0.54 2.50 1.68 1.27 4.00 2.68 2.04
(KN)
Uniform Load 6.30 2.90 1.70 26.00 11.70 6.70 55.00 28.20 16.00
(KN/m2)
BWK 50110 Point Load 1.44 0.96 0.70 3.30 2.20 1.68 5.00 3.56 2.70
(KN) Simple Span
BWK 30080 Uniform Load 7.25 2.61 1.82 19.13 8.50 4.78
BWK 45050 (KN/m2) Not Recommended
Point Load 1.32 0.53 0.44 1.43 0.96 0.72
(KN)
Double Span
Walkway Types of Simple Span (mm) Double Span (mm) Triple Span (mm)
Mesh Loads 600 900 1200 300 450 600 200 300 400
Reference
Uniform Load 4.90 2.25 1.22 20.00 9.00 5.21 43.85 21.40 12.14
XG 11 (KN/m2) Triple Span
XG 21 Point Load 1.10 0.74 0.54 2.50 1.68 1.27 4.00 2.68 2.04
(KN)
NOTE:
Uniform Load 6.43 2.90 1.73 26.37 11.93 6.83 56.00 28.75 16.12 1) The load table is applicable based on
XG 12 (KN/m2) spanning in LWM direction and spot-weld
XG 22 Point Load 1.44 0.96 0.72 3.30 2.22 1.68 5.06 3.56 2.70 at every 4 strand on support and minimum
(KN) 25mm landing on both ends.
2) Spanning recommended based on
Uniform Load 5.80 2.50 1.50 23.80 10.70 6.10 51.00 25.40 14.60 assumption that deflection is not greater
XG 13 (KN/m2) than span /200.
XG 23 Point Load 1.30 0.85 0.64 2.95 1.97 1.50 4.55 3.18 2.42 3) Spanning stated in table are nominal.
(KN) Clear spans are obtained by deducting
25mm landing on both ends.
Uniform Load 8.20 3.65 2.02 33.80 15.30 8.66 70.00 36.10 20.50
XG 14 (KN/m2)
XG 24 Point Load 1.80 1.22 0.92 4.20 2.80 2.12 6.40 4.56 3.45
(KN)
7
BESTAL EXPANDED METALS
INSTALLATION METHOD
(a) Direction Arrangement:
Arrange direction of long way of mesh (LWM) to conform to span direction. (Refer to Fig. 1 & Fig. 2)
(b) Welding:
Distribution of load produced in the mesh by working load on expanded metal is considered to be shown in
Fig. 2. Therefore, for joining two sheets together there are 2 standard methods as below;
(b-1) Sheet joined by butt welding (see Fig. 3)
(b-2) Sheet joined by overlapping and welding for at least one mesh (see Fig. 4)
(b-3) When joining (walkway grating type) in SWM (Short way of mesh) direction, arrange meshes to be in a
straight line and direction of angle each strand to be in same way.
Fig.1: Arrange direction Fig.2: Arrange direction Fig.3: Sheet joined by butt weld Fig.4: Sheet joined by overlap and
for Gratings for Gratings weld
8
BESTAL EXPANDED METALS
0510SS 0816A
0816GS 1038S
0816SS 1676S
1020GS 1676A
All meshes available in aluminium (A), stainless steel (SS), galvanized steel (GS), steel (S), titanium (T), copper (CU) and others.
9
BESTAL EXPANDED METALS
0306 1345A
0929 2550A
1230 2257
1020F 1302F
All meshes available in aluminium (A), stainless steel (SS), galvanized steel (GS), steel (S), titanium (T), copper (CU) and others.
10
BESTAL MICROMESHES
It is also commonly used as screens for insects, such as termites, ants, mosqui-
toes, drainages and all kinds of filtrations.
Materials are available in steel, stainless steel, aluminium, lead, zinc, copper,
silver, titanium and paper.
WING TYPE
We also develop the wing
type expanded metal. The
wing type is of no meshes
on wings. Please refer figure
1-3 for wing type products,
as shown in picture selvage
edge and solid intersperse. Selvage Edge (Fig.1) Solid Intersperse (Fig.2) Solid Intersperse (Fig.3)
11
BESTAL FACADE MESHES
Mesh Ref. Material Mesh Opening Thickness Strand Weight Standard Sheet
SWM x LWM (mm) (mm) Kg/m2 LWM x SWM
(mm) (mm) (+/-10%) (+/-10%) (+/-10%) (mm) (mm)
Note :
1. Customised sizes are available upon request subject to production feasibility
2. Material available : Steel, Hot-dipped galvanised , GI and Stainless Steel
3. Anodizing are also available eg. Aluminium natural colour, bronze colour, gold colour etc.
12
BESTAL FACADE MESHES
13
BESTAL HIGH SECURITY FENCING
It can be manufactured using mild steel with hot-dipped galvanising and or stainless steel.
BSM 3030 S
BSM 3030 L
BBM 3032
• Specification normally refers to steel but can be manufactured in aluminium and stainless steel.
• Sheet tolerance: SWM +/-50mm SWO+5mm Notation: LWM = Long Way of Mesh A = Aluminium
* LWM+/-10mm LWO+/-0mm SWM = Short Way of Mesh F = Flattened
SWO = Short Way Opening
LWO = Long Way Opening
14
BESTAL RAZOR MESHES
BESTAL PERIMETER FENCING
Note :
1. Customised sizes are available upon request subject to production feasibility
2. Material also available in Stainless Steel 304 or 316
Bestal Razor Mesh
Note: Customised sizes are available upon request subject to production feasibility
15
BESTAL PERFORATED METALS
1 42.13% open
2 20.43% open
3 33.33% open
4 33.33% open
5 2.5ø x 4P
35.4% open 6 3ø x 5P
32.6% open 7 3ø x 6P
22.6% open 8 4ø x 7P
29.6% open
9 5ø x 8P
35.4% open 10 6ø x 9P
40.2% open 11 5□ x 8P
39% open 12 7□ x 10P
49% open
13 8□ x 13P
37.9% open 14 3.5ø x 5P
44.4% open 15 7ø x 10P
44.4% open 16 8.2ø x 13P
36% open
16
BESTAL PERFORATED METALS
17 8ø x 12P
40.2% open 18 15ø x 20P
50.9% open 19 10ø x 15P
40.2% open 20 2.5x20
.098” x .787”-23.6% open
21 6x20
.236” x .787”-37.2% open
22 4x20
.157” x .787”-41.2% open
23 46.8% open 24 3.5x21
.137” x .827”-48% open
Calculation
o
60
Diameter (d)
We are one of the specialized manufacturers in Perforated Metals. The products can be used everywhere from daily life to heavy industry. It can
suit the chemical industry, filtering, ventilating and paper industry.
Material: Mild Steel, Stainless Steel, Aluminium, Copper, Galvanized, etc.
Size: 3’ x 6’, 4’ x 8’ or 5’ x 10’ etc.
We also can provide the customer with special size.
Specification: The hole size, pitch, in addition to the shown sheet can vary depending on customer’s need.
17
BESTAL FORMWORKS, LATHS
90 mm 90 mm 90 mm 90 mm 90 mm
BESTAL RIBBED-LATHING
Bestal ribbed-lath is expanded metal-lath stiffened with longitudinal ribs. The fuming de-
sign of the mesh provides efficient background plaster, partitioning, structural encasement,
suspended ceiling, arch formation, construction joints for shallow slabs, retrofitting works, etc.
BESTAL METAL-LATHING
Bestal expanded lath is commonly used for providing key for plaster and render work. Commercial applications
include partitioning, suspended ceiling and structural encasement for fireproofing incorporating venmiculite plaster.
The jointless and continuity of expanded metal-lath is used as background plaster to reinforce against plaster cracks;
and relieving stress at joints of dissimilar material.
BESTAL STRIPMESH
Bestal stripmesh is used to prevent plaster crack along line of stress
between brick/concrete walls. It also acts as reinforcement for block or
brick walls. When embedded in cement mortar at every fourth joints, it
forms an integral structure to absorb stress and vibration in building
BESTAL FRAME TIE BFT 0504 / BESTAL BRICK TIE BBT 28A
Bestal Frame Tie BFT 0504 and Bestal Brick Tie BBT 28A acts as reinforcement for brick and block walls when embedded
in cement mortar at every fourth course
(ie 400mm – 450mm brick/block height interval).
Note: Bestal metal beads / laths / steel lintels are manufactured using low carbon zinc coated steel sheets complying to BS EN 10142:1991
(equivalent to BS 6542:1984)
19
BESTAL STEEL LINTELS
.6
t=2
.0 2.5
t=1 t=
h = 50
h = 71
h = 100
03 th) 03 th) 03 th)
= 1 id = 1 id = 1 id
w al w w al w w al w
n n n
ter ter ter
(in (in (in
t = 3.2 t = 3.2
t = 2.5
h = 75
h = 50
h = 50
Height (mm) 50 50 50 75
Thickness (mm)+/-10% 2.0 2.5 3.2 3.2
Internal Width (mm) 153 153 153 153
h = 50
h = 50
Height (mm) 50 50 50 75
Thickness (mm)+/-10% 2.0 2.5 3.2 3.2
Internal Width (mm) 203 203 203 203
20
BESTAL STEEL LINTELS
Thickness 2mm
LINTEL BRACKET
BESTAL U-CHANNEL
BESTAL U-CHANNEL LINTEL
LINTEL - LOADING TABLE-GUIDE
LOADING TABLE GUIDE
Maximum Height of 100mm thick Brickwall above lintel (m)
Note: 19
21
BESTAL PVC BEADS
BESTAL PVC MINI ANGLE BEAD BESTAL PVC ANGLE BEAD (Round Nose)
D D
20mm 20mm 29mm
19mm
20mm 20mm
D
29mm
19mm
G B
D
G
B
D
All product specification are subject to tolerance (±10 percent), thus design may vary without prior notice.
22
BESTAL PVC BEADS
G G
D D
All product specification are subject to tolerance (+/-10 percent), thus design may vary without prior notice
23
BESTAL PVC BEADS
B
B
G
G
10
H W
30mm
H
45mm
25 49
10
20
BESTAL PVC
CORNER CHAMFER 25mm 30mm
21
m
17
1m
.2
8m
.6
1m
8m
.2
.6
21
m
17
m
All product specification are subject to tolerance (+/-10 percent), thus design may vary without prior notice
24
Copyright Reserved 0114.8000
For enquiries, please contact: BESTAL METAL PRODUCTS (SEA) PTE LTD
No.5 Gul Crescent, Singapore 629521
Tel: (65) 6863 2939 (3 lines) Fax: (65) 6863 2995
Email: sales@bestalmetal.com
Website: www.bestalmetal.com