Professional Documents
Culture Documents
Design of Belts. Please submit your quizzes before 03:00 PM. No excuses shall be entertained
nor extra time shall be given to anybody.
*Required
1. Email address *
alijutt92043@gmail.com
Ali Raza
18-MCE-18
4. Was your reg # included in the list students whose response previous quiz was
accepted (31 Students) *
o Yes
No
clockwise
6. ii. For a flat metal belt, if a driving pulley is rotating in clockwise direction, the slack
side will occur in ?
upperside
7. iii. The formula for calculating life in terms of time (hrs) for 3V configuration for V-
Belts is valid for which number of cycles ?
less than 10 ^9
Consider a flat belt drive to connect horizontal shafts on 40 ft centers. The diameter
of driving pulley is 9.6 in.
Allowable Tension Pulley per Unit Width is “500 * q (lbf/in); where q = cos (reg #) for 1-
45 and q = sin (reg #) for 46-80.
Consider Ks = 1.25 and Cv = 0.7. Consider torque as 6,000 lbf.in, coefficient of friction
f as 0.8 and Cp = 0.94.
The Velocity Ratio is 5:3. The angular speed of the driven pulley is 1000*(q).
1.44
3000 N/m
Forms